101579
19
Zoom out
Zoom in
Previous page
1/61
Next page
36 37
Advanced
Features
EXPOSURE
(
SHUTTER SPEED AND APERTURE
)
STILL PHOTOGRAPHY FUNCTIONS
Closed Open
When shooting a moving subject, you can either “freeze the motion” or “capture the sense of
movement” by adjusting the shutter speed.
Freezes the motion of the
subject.
Photographs the traces left
by the subject's movement.
By adjusting the aperture, you can change the depth of focus (depth of field).
The area in front of and
behind the subject is also
in focus in the shot.
The background is out of
focus.
Fast Slow
Shutter speed
Aperture
FOCUSING
(
DISTANCE
)
STILL PHOTOGRAPHY FUNCTIONS
The distance from the subject to the camera is referred to as the shooting distance.
When the shooting distance is set correctly and the image appears sharp, the image is focused.
Three focusing methods
There are mechanisms for focusing: (1) Single AF (S-AF); (2) Continuous AF (C-AF); and (3)
Manual focus (MF).
S-AF: Use S-AF for normal photography. In this mode, the camera focuses each time the Shutter
button is pressed down halfway.
2 Turning Macro mode ON/OFF
Wide angle:
50 cm (1.6 ft.) to infinity
Telephoto:
90 cm (3.0 ft.) to infinity
10 cm-80 cm
(3.9 in.-2.6 ft.)
1 cm-20 cm
(0.4 in.-7.9 in.)
Macro OFF Macro ON Super Macro ON
C-AF: Use C-AF when photographing moving subjects. When this mode is set, the camera
focuses continuously on the subject in the center of the screen. See P.49 for details.
MF: The focus is adjusted by turning the focusing ring manually. See P.48 for details.
The AF sensor
The FinePix S7000 uses an external AF sensor (external-light passive phase difference AF) that
features faster AF operation than previous models. The external AF sensor does not function
when Macro mode, Super macro mode, the digital zoom, AREA or C-AF focusing is used or
when “ADAPTER-YES” is selected. It may take longer to focus if the external AF sensor is
soiled (P.113).
Causes of focusing errors and the solutions
The subject is not suited to AF.
Use AF lock (Focus mode: AF (CENTER))1 or MF.
The subject is not in the AF frame.
Use AF lock (Focus mode: AF (CENTER))1 or MF.
The subject is outside the shooting range.
Turn Macro mode on or off (2).
The subject is moving too quickly. Use MF (pre-setting the shooting distance for a shot (lock pin))
Cause Solution
1 Taking pictures using AF lock
Recompose the shot and take the picture.Capture the subject
Subjects not suitable for auto focus
h Very shiny subjects such as a mirror or car
body
h Subjects photographed through glass
h Subjects that do not reflect well, such as hair
or fur
h Subjects with no substance, such as smoke
or flames
h When the subject is dark
h When there is very little contrast between the
subject and the background (such as white
walls or subjects dressed in the same color as
the background)
h Subjects moving at high speed
h When there is a high-contrast subject other
than the main subject at or near the center of
the image and that subject is closer to or
further from the camera than the main subject
(as when you photograph someone against a
background with strongly contrasting
elements)
Exposure refers to the light that hits the CCD or the total amount of captured light and determines
the brightness of the image.
The exposure is determined by the combination of aperture and shutter speed. In AE (automatic
exposure), the camera automatically determines the correct exposure, allowing for factors such as
the brightness of the subject and the sensitivity setting.
The graph at left shows the way the aperture and shutter speed settings can
be changed while maintaining the same exposure level.
h When the exposure is decreased by one step, the shutter speed also
decreases by one step (the dot moves upper left).
h When the exposure is increased by one step, the shutter speed also
increases by one step (the dot moves lower right).
h Combinations that result in the shutter speed or aperture being outside the
available range of settings cannot be selected (white dots).
h In the “
N”, “M” and “<” photography modes, it is easy to select different
settings along this line.
h Selecting settings that run parallel to this line by adjusting the brightness of
the photographed image is referred to as exposure compensation.
OpenClosed
(
A
p
erture
)
Slow
(Shutter speed)
Fast
When you cannot get the correct exposure
AE lock: Determines and fixes the exposure at a target level. Use the following procedure to take a
picture using AE lock:
Press the “AE-L” button (sets and locks the
exposure). Press the Shutter button down
halfway (sets and fixes the focus). Press
the Shutter button down fully (takes the
picture).
Exposure compensation:
This function uses the exposure level set by
the AE function as a reference (0) and then brightens (+) or darkens (–) the image. By
selecting Auto bracketing, you can shoot 3 frames, one underexposed (–), one at the
reference exposure (0) and one overexposed (+).
(–) (0) (+)
Main subject
Main subject
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujifilm Finepix S 7000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm Finepix S 7000 in the language / languages: English as an attachment in your email.

The manual is 4,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info