101575
59
Zoom out
Zoom in
Previous page
1/69
Next page
This manual will show you how to use your FUJIFILM DIGITAL CAMERA
FinePix S304 correctly. Please follow the instructions carefully.
BL00171-200
(
1
)
7
8
Getting Ready
Camera Connection
Using FinePixViewer
Basic Photography
Advanced Features
Photography
Advanced Features
Playback
Software Installation
Settings
3.2
2 3
Warning
This symbol is intended to alert the user to
the presence of uninsulated “dangerous
voltage” within the product’s enclosure
that may be of sufficient magnitude to
constitute a risk of electric shock to
persons.
This symbol is intended to alert the user
to the presence of important operating
and maintenance
(
servicing
)
instructions
in the literature accompanying the
appliance.
For customers in the U.S.A.
FCC Statement
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
(
1
)
This device may not cause
harmful interference, and
(
2
)
this device must
accept any interference received, including
interference that may cause undesired
operation.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The graphical symbols are located on the bottom
of the case.
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
CAUTION
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to
try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
Please read the Safety Notes
(
P.131
)
and make sure you understand them
before using the camera.
Consult the dealer or an experienced radio/TV
technician for help.
You are cautioned that any changes or
modifications not expressly approved in this
manual could void the users authority to operate
the equipment.
Notes on the Grant:
To comply with Part 15 of the FCC rules, this
product must be used with a Fujifilm-specified
ferrite-core USB cable and DC supply cord.
For customers in Canada
CAUTION
This Class B digital apparatus complies with
Canadian ICES
-
003.
54
ADVANCED FEATURES PHOTOGRAPHY
...................
43
Photography Mode Specifications
..........................
43
R/W MANUAL
.....................................................
44
E SCENE POSITION
................................................
45
T MOVIE (VIDEO)
....................................................
47
PHOTOGRAPHY MENU OPERATION
...........................
50
y SETTING QUALITY MODE (NUMBER OF
RECORDED PIXELS FOR IMAGES)
...................
51
= SELF-TIMER PHOTOGRAPHY
............................
53
d EV (EXPOSURE COMPENSATION)
....................
55
a
WHITE BALANCE (SELECTING THE LIGHT SOURCE)
...
56
x
FLASH (FLASH BRIGHTNESS ADJUSTMENT)
...
57
K SHARPNESS
........................................................
57
N APERTURE-PRIORITY AUTO
.............................
58
PHOTOGRAPHY MENU
q
MOVIE
q
STILL IMAGE
? Red-Eye Reduction + Slow Synchro
......................
35
Suppressed Flash
.......................................................
36
e MACRO (CLOSE-UP) PHOTOGRAPHY
....................
37
VIEWING YOUR IMAGES (PLAYBACK)
...................
38
Fast Forwarding Images
........................................
38
MULTI-FRAME PLAYBACK
.......................................
39
PLAYBACK ZOOM
.....................................................
40
ERASING SINGLE FRAME
........................................
41
w
PLAYBACK
Contents
PREFACE
.......................................................................
11
Attach the lens cap, strap and adapter ring
................
11
Attaching the Lens Cap
..............................................
12
LOADING THE BATTERY AND xD-Picture Card
...........
14
SWITCHING ON AND OFF
.............................................
17
SETTING THE DATE AND TIME
....................................
18
Changing the date and time
........................................
20
SELECTING THE LANGUAGE
.......................................
21
1 Getting Ready
Warning
........................................................................
2
Preface
.........................................................................
6
Camera Features and Accessories
..............................
7
Nomenclature
...............................................................
8
3 Advanced Features Photography
g LCD BRIGHTNESS/VOLUME
....................................
79
g USING SETUP
.........................................................
80
List of settings
.........................................................
81
SETUP Menu Options (Date/time setting, etc.)
.........
81
POWER SAVE
............................................................
82
SET–UP
6.1 The Software Components
........................................
83
6.2 Installation on a Windows PC
....................................
84
6.2.1 Load the CD-ROM into your PC
.......................
84
6.2.2 From FinePixViewer installation to restart
........
85
6.3 Installation on a Mac OS 8.6 to 9.2
...........................
89
6.3.1 Check the system software settings
.................
89
6.3.2 From FinePixViewer installation to restart
........
89
6.4 Installation on a Mac OS X
........................................
92
6.4.1 From FinePixViewer installation to restart
........
92
4 Advanced Features Playback
5 Settings
6 Software Installation
System Expansion Options
......................................
113
Accessories Guide
...................................................
114
Notes on Using Your Camera Correctly
..................
116
Notes on the Power Supply
.....................................
117
Applicable Batteries
............................................
117
Notes on the Batteries
.........................................
117
Notes on Using the AC Power Adapter
...............
119
Notes on the xD-Picture Card
..................................
120
Warning Displays
.....................................................
122
Troubleshooting
.......................................................
125
Specifications
...........................................................
128
Explanation of Terms
...............................................
130
Safety Notes
............................................................
131
EC Declaration of Conformity
..................................
134
TAKING PICTURES (AUTO MODE)
...............................
22
Indicator Lamp Display
...........................................
27
Number of available frames
........................................
28
USING AF/AE LOCK
.......................................................
29
FRAMING GUIDELINE FUNCTION
................................
31
DIGITAL ZOOM
...............................................................
32
z FLASH
........................................................................
33
cAuto Flash Mode
....................................................
34
nRed-Eye Reduction
................................................
34
z Forced Flash
...........................................................
35
vSlow Synchro
.........................................................
35
2 Basic Photography
PLAYING BACK MOVIES (VIDEO)
................................
59
p ERASING SINGLE ALL FRAMES/FORMAT
.......
61
k
PROTECTING IMAGES FRAME/ALL
...................
65
i
HOW TO SPECIFY PRINT OPTIONS (DPOF)
.........
69
iDPOF SET FRAME
...............................................
70
rRECORDING VOICE MEMOS
..............................
74
PLAYING BACK VOICE MEMOS
...............................
77
w
PLAYBACK MENU
1
2
3
4
5
6
7
8
7.1 Using the optional AC Power adapter
.......................
95
7.2 Use at DSC mode
.....................................................
96
7.3 Use at PC-CAM mode
...............................................
99
7.4 Disconnecting the Camera
......................................
102
7 Camera Connection
8.1 Saving Images on Your Computer
..........................
104
8.2 Making a FinePix CD Album
...................................
105
8.3 Using the FinePix Internet Service
..........................
106
8.4 User Registration
.....................................................
106
8.5 Mastering FinePixViewer
.........................................
110
8.6 Uninstalling the Software
.........................................
111
8 Using FinePixViewer
6 7
Camera Features and Accessories
h Superb image quality provided by the high-resolution
Fujinon 6× zoom lens and 3.2 million effective pixels
h Maximum number of recorded pixels: 2048 × 1536
pixels (3.15 million pixels)
h Compact and lightweight body
h Wide range of photography applications (includes Macro
function)
h Intelligent Auto White Balance and AE functions built-in
h Built-in automatic flash with precise wide-range flash
control
h 3.2× digital zoom photography (5× for movie shooting)
and up to 12.8× zoom playback functions
h Manual and Scene Position modes that provide an
expanded range of photography options
h 1.8 inches 62,000 pixels amorphous silicon TFT LCD
monitor and 0.33 inches electronic viewfinder (EVF)
h Voice Caption function records up to 30 seconds of
sound.
h Movie shooting function (320 × 240/160 × 120 pixels
with sound)
h Easy high-speed image file transfer via the USB
connection (using the Interface Set provided with sound)
h Accepts tele and wide conversion lenses. (Flash cannot
be used when a conversion lens is mounted.)
h Conforms to the new standard for digital camera file
system
Design rule for Camera File system
Features Accessories
h LR6 AA-size alkaline batteries (4)
h 16MB, xD-Picture Card (1)
Supplied with: Anti-static case (1)
h Adapter Ring (1) h Lens Cap (1)
h Strap
(
1
)
h Interface Set (1)
CD-ROM: Software for FinePix SX (1)
Special USB cable with Noise Suppression core (1)
h Owner’s Manual
(
this manual
)(
1
)
Preface
Test Shots Prior to Photography
For particularly important photographs (such as weddings and
overseas trips), always take a test photograph and view the
image to make sure that the camera is functioning normally.
h Fuji Photo Film Co., Ltd. cannot accept liability for any
incidental losses (such as the costs of photography or the
loss of income from photography) incurred as a result of
faults with this product.
Notes on Copyright
Images recorded using your digital camera system cannot be
used in ways that infringe copyright laws without the consent
of the owner, unless intended only for personal use. Note that
some restrictions apply to the photographing of stage
performances, entertainments and exhibits, even when
intended purely for personal use. Users are also asked to note
that the transfer of memory cards containing images or data
protected under copyright laws is only permissible within the
restrictions imposed by those copyright laws.
Liquid Crystal
If the LCD monitor or viewfinder (EVF) is damaged, take
particular care with the liquid crystal in the monitor or
viewfinder. If any of the following situations arise, take the
urgent action indicated.
h If liquid crystal comes in contact with your skin
Wipe the area with a cloth and then wash thoroughly with
running water and soap.
h If liquid crystal gets into your eye
Flush the affected eye with clean water for at least
15 minutes and then seek medical assistance.
h If liquid crystal is swallowed
Flush your mouth thoroughly with water. Drink large quantities
of water and induce vomiting. Then seek medical assistance.
Notes on Electrical Interference
If the camera is to be used in hospitals or aircrafts, please
note that this camera may cause interference to other
equipment in the hospital or aircraft. For details, please
check with the applicable regulations.
Handling Your Digital Camera
This camera contains precision electronic components. To
ensure that images are recorded correctly, do not subject the
camera to impact or shock while an image is being recorded.
Trademark Information
h IBM PC/AT is a registered trademark of International
Business Machines Corp. of the U.S.
h iMac and Macintosh are registered trademarks of Apple
Computer, Inc.
h QuickTime and the QuickTime logo are trademarks used
under license. The QuickTime logo is registered in the
U.S. and other countries.
h Adobe Acrobat
®
Reader
is a trademark of Adobe Systems
Incorporated of the U.S.
h Microsoft, Windows, the Windows logo and DirectX are
either trademarks, or registered trademarks of Microsoft
Corporation in the United States and/or other countries.
Windows is an abbreviated term referring to the Microsoft
Windows Operating System.
The Designed for Microsoft Windows XP logo refers to
the camera and the driver only.
h xD-Picture Card and other company or product names are
trademarks or registered trademarks of the respective
companies.
Exif Print (Exif ver. 2.2)
Exif Print Format is a newly revised digital camera file format that
contains a variety of shooting information for optimal printing.
98
Flash control
sensor
Flash
(P.33)
Self-timer lamp
DC IN 5V(Power input)
socket(P.95)
Shutter button
Strap mount
OPEN(Flash pop-up)
button
Slot cover
xD-Picture Card slot
Microphone
Speaker
Lens
Digital(USB)socket
(P.96,99)
Power switch
Playback mode(P.38)
Photography mode(P.22)
Power-OFF(P.17)
MOVIE(Video) (P.47)
Manual(P.44)
AUTO (P.22)
Scene Position(P.45)
Mode dial
Nomenclature
Refer to the pages in parentheses for information on using the camera features.
a ( Tele zoom)button
b ( Wide zoom)button
BACK button
Indicator lamp
(P.27)
Viewfinder(EVF) (P.23)
EVF/LCD
(monitor selector)
button
(P.23)
LCD monitor(P.23)
Tripod mount
MENU/OK button
DISP button
(P.31,39)
Strap mount
Battery cover
(P.15)
d ( Macro)button(P.37)
c ( Flash)button(P.33)
11
1
10
Pull the lens cap cord through the strap mount.
1 Getting Ready
PREFACE
Attach the lens cap, strap and adapter ring
!
Attach the lens cap cord to avoid losing the lens cap.
1
Nomenclature (Sample display)
!AF
60
3M・F
123−9999
 1/ 1/2002
Playback frame number
Photography mode
Flash
Date
Zoom bar
Battery low warning
Playback mode
Voice captioning
DPOF
Protection
White balance
Macro
Battery low warning
Number of remaining shots
Quality mode(Number of recorded
pixels for images)
AF warning
AF frame
EV(Exposure compensation)
Self-Timer
Camera shake warning
Example of Screen Text Display: Still photography mode
Example of Screen Text Display: Playback mode
!
Failure to attach the strap correctly can result in the
camera being dropped.
Attach the strap to the strap mounts on the
camera. Once you have attached both ends of
the strap, check carefully to ensure that the
strap is firmly secured.
2
12 13
1
PREFACE
Screw the adapter ring in the direction of the
arrow to mount it on the camera.
3
To prevent the lens cap from appearing in the
shot when you take pictures, attach the lens cap
to the strap.
Fit and remove the lens cap by squeezing the
left and right sides of the cap.
1
Attaching the Lens Cap
Mounting the adapter ring on the camera
protects the lens and allows you to attach the
optional conversion lens. The adapter ring
should be mounted on the camera at all times to
protect the lens.
2
Conversion Lens Guide
Changes the focal length by a factor of 0.79×
(wide-angle: equivalent to 30 mm) without altering
the F-stop value of the lens.
hWide conversion lens specifications
Magnification : 0.79×
Lens configuration : 3 lenses in 3 groups
Shooting range : Approx. 10 cm to infinity
Dimensions : 32 mm (1.26 in.) × 70 mm
(2.76 in.) dia.
Mass (Weight) : Approx. 185 g (6.5 oz.)
Accessories : Adapter Ring AR-FX9 (see
below for specifications),
Lens caps (front and rear),
Lens pouch
!
The enclosed adapter ring (for FinePix 4800/
6900/S602) cannot be used.
!
Only use the wide conversion lens at the wide-
angle zoom setting.
!
The flash cannot be used when the wide
conversion lens is mounted.
Wide Conversion Lens WL-FX9
Changes the focal length by a factor of 1.5x
(telephoto: equivalent to 340 mm) without altering
the F-stop value of the lens.
hTeleconversion lens specifications
Magnification : 1.5×
Lens configuration : 3 lenses in 3 groups
Shooting range : Approx. 2.4 m to infinity
Dimensions : 55 mm (2.17 in.) × 65 mm
(2.56 in.) dia.
Mass (Weight) : Approx. 100 g (3.5 oz.)
Accessories : Adapter Ring AR-FX9 (see
below for specifications),
Lens caps (front and rear),
Lens pouch
!
Only use the tele conversion lens at the telephoto
zoom setting.
!
The flash cannot be
used when the
teleconversion lens
is mounted.
Teleconversion Lens TL-FX9
Conversion
lens
!
Commercially available filters can be mounted on the lens when the adapter ring is attached, but no more than
one filter should be mounted at a time.
14 15
1
LOADING THE BATTERY AND xD-Picture Card
Compatible batteries
Use four AA-size alkaline batteries or four AA-
size nickel-metal hydride (Ni-MH) batteries.
Notes on Handling Batteries
h It is recommended that you use same brand of
alkaline batteries as those supplied with the camera.
h Never use a battery when the
outer casing is split or peeling as
this could result in a short-circuit
and cause major problems due
to battery fluid leakage or
overheating.
h Do not use different types of batteries or old and new
batteries together.
h You cannot use lithium, manganese or nickel-
cadmium (Ni-Cd) batteries.
h The operating lives of alkaline batteries vary between
brands and the life of batteries you purchase may be
shorter than the alkaline batteries provided with the
camera. Note also that due to the nature of alkaline
batteries, the time for which they can be used is
shorter in cold locations (at temperatures of +10°C
(+50°F) or below). Consequently, Ni-MH batteries are
recommended.
h Soiling (fingerprints, etc) on the terminals of batteries
can greatly reduce the time for which the batteries
provide power.
h You will need the optional charger (P.114) to recharge
Ni-MH batteries.
h See P.117, 118 for notes on using batteries.
xD-Picture Card
(
sold separately
)
DPC-16 (16MB) DPC-32 (32MB)
DPC-64 (64MB) DPC-128 (128MB)
!
Operation of this camera is only guaranteed when it
is used with FUJIFILM xD-Picture Card.
!
Because xD-Picture Cards are small, they can be
accidentally swallowed by small children. Be sure to
store xD-Picture Cards out of the reach of small
children. If a child accidentally swallows an xD-
Picture Card, seek medical advice immediately.
!
See P.120-121 for more information on xD-Picture
Card.
Outer casing
01
02
03
1Slide the battery cover out and lift it open.
2Insert the batteries correctly as indicated by
the polarity icons.
3Close the battery cover.
!
Do not apply excessive force to the battery cover.
Do not open the battery cover while the camera
is still switched on as this could corrupt the
image files on the xD-Picture Card or damage
the xD-Picture Card itself.
Replacing the batteries
Check that the Power switch is set to OFF, open
the battery cover and remove the batteries.
!
Take care not to drop the batteries when you open
or close the battery cover.
Front Back
16 17
1
SWITCHING ON AND OFF
LOADING THE BATTERY AND xD-Picture Card
01
02
03
1Open the slot cover.
2Firmly push the xD-Picture Card fully into the
xD-Picture Card slot.
3Close the slot cover.
!
If you open the battery cover while the camera is still
switched on, the camera is automatically switched
off to protect the xD-Picture Card.
!
The xD-Picture Card will not slide fully into the slot if
it is inserted facing the wrong way. Be careful not to
apply excessive force to the xD-Picture Card.
!
When storing the xD-Picture Card, always use the
special anti-static case provided.
Replacing the xD-Picture Card
When you push the xD-Picture
Card into the slot and then
slowly remove your finger, the
lock is released and the xD-
Picture Card is pushed out.
You can then pull the xD-
Picture Card the rest of the
way out.
DATE/TIME
 NOT SET
SET
NO
BACK
OK
!
To set the date and time later, press the BACK
button.
!
If you do not set the date and time, this confirmation
message will appear each time you switch the
camera on.
When you first switch the camera on, the date is
cleared. Press the MENU/OK button to set the
date and time.
1 2
Turn the Power switch to turn the camera on
and off.
q : Photography mode
w : Playback mode
OFF: Power-OFF
When you switch the camera on, the indicator
lamp lights (green).
!
Take care not to remove your finger too quickly
after the lock is released, as the card may spring
completely out of the slot.
19
1
18
SETTING THE DATE AND TIME
OK
BACK
2002
01 01
YYYY.MM.DD
12:00 
 AM AM
DATE/TIMEDATE/TIME
1 Use d and c to select Year, Month, Day,
Hour or Minute.
2 Press a or b to set the number.
!
If you hold down a or b, the numbers change
continuously.
!
When the time displayed passes 12:00, the AM/PM
setting automatically switches.
3
01 02
4
OK
BACK
2002
01 01
YYYY.MM.DD
12:00 
 AM AM
DATE/TIMEDATE/TIME
OK
BACK
 AM AM
2002 06 19
 8
59
DATE/TIMEDATE/TIME
YYYY.MM.DD
Press d when YEAR is selected, or press
c when MIN is selected and select the date
format.
5
OK
BACK
 AM AM
06/19/2002
  8 59 
DATE/TIMEDATE/TIME
MM/DD/YYYY
Press a or b to switch between YYYY.MM.
DD (year.month.day) and MM/DD/YYYY
(month/day/year).
OK
BACK
 AM AM
06/19/2002
 8
59
DATE/TIMEDATE/TIME
MM/DD/YYYY
Once you have set the date and time, press the
MENU/OK button. Pressing the MENU/OK
button switches the camera to Photography or
Playback mode.
!
To set the time more precisely, press the MENU/OK
button when the time on your reference clock reaches
zero seconds.
!
If at least 2 hours have passed since the AC power
adapter was connected or the batteries inserted and the
date and time set, then those settings will be maintained
for roughly 6 hours even when the camera has no power
supply (when the AC power adapter is disconnected and
the batteries are removed).
6
21
1
20
Changing the date and time
1 Press the MENU/OK button.
2 Use d or c to select gOPTION and
then use a or b to select SETUP.
3 Press the MENU/OK button.
4 Select DATE/TIME and press c.
See P.18 for information on setting the date and
time.
OK
BACK
POWER SAVE
DATE/TIME
USB MODEUSB MODE
OFF
SET
SET−UPSET−UP
POSTVIEWPOSTVIEW
ON
DSC
0103 0204
0103 02
Power Save Function
If the camera is not used for 2 minutes, this
function automatically switches it off.
When this function is enabled, the screen
switches off to conserve battery power if the
camera is not used in any way for 30 seconds
(See P.82 for details). To switch the camera
back on, turn the Power switch to OFF briefly
and then back to q.
Checking the remaining batteries charge
Switch the camera on and check that no battery
level warning (
Z or X) is displayed on the
LCD monitor. If no icon is displayed, there is
ample charge left in the batteries.
i
X Lit red:
Batteries charge low. Replace or recharge the
batteries as they will run out shortly.
i
C Blinking red:
The batteries are exhausted. The display will
shortly go blank and the camera will stop
working. Replace or recharge the batteries.
!
Do not reuse batteries that have no remaining
charge (C blinking red) as this can result in faults
such as the camera switching off without retracting
the lens.
!
The above estimates are for the Still image modes.
In Playback mode, the transition from X to C
may take less time.
SETTING THE DATE AND TIME
SELECTING THE LANGUAGE
1
1Press the MENU/OK button.
2Press d or c to select gOPTION and
then press a or b to select SETUP.
3Press the MENU/OK button.
2
1Press a or b to select LANGUAGE.
2Press d or c to select ENGLISH.
3Press the MENU/OK button.
030201
LCD BRIGHTNESSLCD BRIGHTNESS
OPTIONOPTION
SET−UP
OK
BACK
SET−UPSET−UP
SOUND
RESET ALLRESET ALL
LOW
LANGUAGELANGUAGE
ENGLISHENGLISH
OK
LOW
23
2
22
Press the z OPEN button to make the flash
pop up.
2
!
If the photography mode is R, use the Auto
Flash mode.
!
When the flash is popped up or you are using the
flash to take pictures, you may see the image
disappear and the screen go dark as the flash
charges. The indicator lamp blinks orange while the
flash is charging.
!
If you use the flash in very dusty environments or
when it is snowing, the flash may reflect off
snowflakes or floating dust particles so that they
appear as glowing white dots on your image.
!
You can specify individually whether the viewfinder
(EVF) or the LCD monitor is used in the Photography
and Playback modes.
Immediately after you select Photography mode,
the viewfinder (EVF) switches on. You can
choose whether to use the viewfinder (EVF) or
the LCD monitor to take pictures by pressing the
EVF/LCD button to switch between the two.
23
Mode
qPhotography mode
wPlay back mode
Default setting
EVF
LCD monitor
LCD monitor
EVF
After switching
The selection reverts to the default setting when you
switch the camera off.
1
Set the Power switch to q
and set the
Mode dial to R.
Effective Photography Range
Approx. 80 cm (2.6 ft.) to infinity
!
If the subject is closer than approximately 80 cm (2.6
ft.), set the camera to Macro mode (P.37).
!
Check that the lens is clean. If it is dirty, clean the
lens as described on P.116.
!
If a , ƒ, å or
˙ message appears, see P.122,
123.
2
Basic
Photography
Youve read the chapter on getting ready and
the camera is now set up and ready to take
pictures.
The Basic Photography section explains the
three basic steps of taking pictures, viewing
pictures and erasing pictures. Master the
basic steps by actually trying them out on the
camera as you go.
Click
TAKING PICTURES
(
AUTO MODE
)
25
2
24
Frame the shot so that the subject fills the entire
AF (Auto Focus) frame.
!
In some conditions it may be difficult to see your
subject clearly on the LCD monitor (Such as in
sunny weather outdoors). In such situations, use the
viewfinder (EVF) to take the shot.
!
If the subject is not in the AF frame, use AE/AF lock
to take the picture (P.29).
6
60
1M1M 1M 1M
Bebeep
7
60
1M1M 1M 1M
When you press the shutter button down halfway, the
camera emits a short double-beep and focuses on your
subject (the indicator lamp (green) changes from
blinking to steady). At that point, the AF frame on the
screen becomes smaller and the camera sets the
shutter speed and aperture.
!
If the camera does not emit a short double-beep and V
appears on the screen, the camera cannot focus.
!
When you press the shutter button down halfway, the image
on the screen freezes temporarily. However, this image is not
the recorded image.
!
If V is displayed on the screen (e.g. the shot is too dark
for the camera to focus), try standing about 2 m (6.6 ft.) from
your subject to take the picture.
7
To zoom in on the subject, press a (T TELE
Zoom). To zoom out, press b (W WIDE Zoom).
A zoom bar appears on the screen when you
zoom in or out.
hOptical zoom focal length (35mm camera
equivalent)
Approx. 38 mm-228 mm (1.5 in. to 9.0 in.)
Maximum zoom scale: 6×
!
Zooming stops briefly when the camera switches
between optical zoom and digital zoom (P.32).
4
60
Zoom bar
1M1M 1M 1M
Loop the strap over your wrist, brace your
elbows firmly against your body and hold the
camera with both hands.
Be careful to ensure that the lens, microphone
and flash control sensor are not obscured by
your hands or the camera strap.
!
You may be unable to take pictures correctly if your
finger or the camera strap is obscuring the lens, etc.
4 5
TAKING PICTURES
(
AUTO MODE
)
27
2
26
h Very shiny subjects such as a mirror or car body.
h Subjects photographed through glass.
h Subjects that do not reflect well, such as hair or fur.
h Subjects with no substance, such as smoke or
flames.
h When the subject is dark.
h When there is very little contrast between the subject
and the background (such as white walls or subjects
dressed in the same color as the background).
Subjects not suitable for autofocus
h Subjects moving at high speed.
h When something other than your subject is close to
the AF frame, has contrasting areas of light and
dark and is either closer or further away than your
subject (as when you photograph someone against
a background with strongly contrasting elements).
For subjects of this type, use AF/AE lock (P.29).
Though the FinePix S304 uses an accurate autofocus mechanism, it may have difficulty focusing or not be able
to focus at all for the types of subject and situation listed below. In such cases, the image may be out of focus.
Indicator Lamp Display
Display Status
Lit green Ready to shoot.
Blinking green AF/AE operating or camera shake/AF warning (ready to shoot)
Blinking green and orange
alternately
Recording data to the xD-Picture Card (ready to shoot).
Lit orange Recording data to the xD-Picture Card (not ready to shoot)
Blinking orange Charging the flash (flash will not fire)
Blinking red
i xD-Picture Card-related warning
The xD-Picture Card is not loaded, is not formatted, is incorrectly formatted or is fully
recorded. xD-Picture Card fault.
i Lens operation error.
To take the picture, press the shutter button
down fully without lifting your finger off it. The
camera makes a soft clicking sound, and the
data is then recorded.
!
If you press the shutter button down fully in one
motion, the shot is taken without the AF frame
changing.
!
When you take a picture, the indicator lamp lights
orange (not ready to shoot) before switching back to
green to indicate that the camera is again ready for
shooting.
!
The indicator lamp flashes orange during charging.
The screen may go dark briefly. This is normal and
does not indicate a fault.
!
See P.122-124 for information on the warning displays.
Click
8
Warnings displayed when the shutter
button is pressed down halfway
V
Shot not focused.
i Move at least 2 m (6.6 ft.) away from the
subject before taking the shot.
i Use AF/AE lock to take the shot (P.29).
\
Strong likelihood of camera shake
due to the slow shutter speed.
i Use the flash.
i Use a tripod.
Solution
Solution
TAKING PICTURES
(
AUTO MODE
)
29
2
28
USING AF/AE LOCK
In a shot with this type of composition, the
subjects (two people in this case) are not in the
AF frame. If the shot is taken at this point, the
subjects will not be in focus.
Move the camera slightly so that one of the
subjects in the AF frame.
1
60
1M1M 1M 1M
2
60
1M1M 1M 1M
AF/AE Lock
On the FinePix S304, when you press the shutter button down half way, the focus and exposure settings
are fixed (AF/AE lock). If you want to focus on a subject that is off to one side of the image or if you want
to set the exposure before you compose the final shot, lock the AF and AE settings and then compose
and shoot your picture to get the best results.
Number of available shots displayed on the camera for a new xD-Picture Card formatted in the camera.
60
1M1M 1M 1M
Number of available frames
Standard number of shots per xD-Picture Card
Because the amount of data recorded varies depending on the subject, the number of available shots may not
decrease when recording ends, or may decrease by 2 frames. The discrepancy between the standard number of
available shots and the actual number of available shots increases in proportion to the capacity of the xD-Picture Card.
The number of available shots is displayed on
the screen.
!
See P.51 for information on changing the File size.
!
At shipment, the default y QUALITY settings is 1M.
Quality
Image Data Size
DPC-16 (16MB)
DPC-32 (32MB)
Approx. 1300KB Approx. 590KB
3M F 3M N
DPC-64 (64MB)
DPC-128 (128MB)
50
102
25
12
107
215
53
26
Number of recorded pixels
2048 × 1536 640 × 480
49
99
122
247
Approx. 320KB Approx. 130KB
198
398
497
997
1280 × 960
1M
39
79
Approx. 390KB
159
319
1600 × 1200
2M 0.3M
TAKING PICTURES
(
AUTO MODE
)
31
2
30
FRAMING GUIDELINE FUNCTION
Text displayed
Framing Guideline
displayed
No text displayed
You can use the framing guidelines to take
pictures in the R,
E
, W mode. The screen
display changes each time you press the DISP
button. Press the DISP button until Framing
Guideline appears.
!
The framing guideline is not recorded on the image.
!
The lines in the scene frame roughly divide the
recorded pixels into three equal parts horizontally and
vertically. When the image is printed, the resulting
print may be shifted slightly from the scene frame.
Always use the AF/AE lock to compose your
picture.
Failing to use the AF/AE lock may result in the
image being out of focus.
Important
Scene
Use this frame when you want to position your
main subject in the center of the frame or when
you want to align your shot with the horizon.
This feature provides a clear guide to the
subject size and the overall balance of the shot
so that you get exactly the shot you want.
USING AF/AE LOCK
Keep holding the shutter button down halfway
(AF/AE lock) and check that the AF frame on the
screen shrinks and that the indicator lamp
(green) stops flashing and stays lit.
Continue to hold the shutter button down halfway
(AF/AE lock). Move the camera back to the
original image and then fully press down on the
shutter button.
!
You can reapply the AF/AE lock as many times as
you like before releasing the shutter.
!
The AF/AE lock operates in all photography modes
and can be used to ensure excellent results.
Bebeep
3
Click
4
33
2
32
I
FLASH
To change the flash setting, pop the flash unit up.
The flash mode setting does not change when
you close the flash.
hEffective flash range (in
R mode)
Wide-angle: Approx. 0.3 m to 3.5 m
(1 ft. to 11.5 ft.)
Telephoto : Approx. 0.8 m to 3.5 m
(2.6 ft. to 11.5 ft.)
1
!
If the photography mode is R, use the Auto
Flash mode.
!
When you pop the flash up, the image shown on the
screen may disappear and the screen may go dark
because the flash is charging. In this event, the
indicator lamp blinks orange.
!
If you use the flash in very dusty environments or
when it is snowing, the flash may reflect off
snowflakes or floating dust particles so that they
appear as glowing white dots on your image.
Press the I Flash button (c) to select the flash
mode to be used.
!
The flash charging time may increase if the charge
remaining in the battery is low.
2
DIGITAL ZOOM
Press a to zoom in on your subject and b to
zoom out. When the limit of optical zooming is
reached, the digital zoom can then be used to
zoom still further.
!
See P.51 for information on changing the quality
setting.
!
If the image goes out of focus when you use the
zoom, press the shutter button down halfway to
refocus.
!
The optical zoom is equivalent to approximately
38 mm-228 mm on a 35 mm camera.
The position of the on the zoom bar indicates
the current zoom setting.
hIf the is above the dividing line, the digital
zoom is being used. If it is below the line, the
optical zoom is being used.
hPress a or b to move the up and down.
hWhen you switch between digital zoom and
optical zoom, the stops moving briefly.
Press the button for the same direction again
to start the moving and switch the zoom
setting.
2M 2M
2M
1M
1M
03M
03M
Optical zoom
Digital zoom
Zoom bar display
Digital zoom focal distance
(35 mm camera equivalent)
Max. Zoom
Scale
Equivalent to approx. 228 mm-291 mm
Equivalent to approx. 228 mm-364 mm
Equivalent to approx. 228 mm-729 mm
1.28×
1.6×
3.2×
3M
2M
1M
0.3M
35
2
34
z
Forced Flash
Use this flash mode to photograph backlit
scenes, such as a subject against a window or
in the shade of a tree, or to obtain the correct
colors when you are shooting under lighting
such as fluorescent tubes. In this mode, the
flash fires in bright as well as dark conditions.
This is a flash mode that uses a slow shutter
speed. This allows you to take pictures of people
at night that clearly show both your subjects and
the night-time backdrop.
v
Slow Synchro
!
The image may be overexposed when you shoot
bright scenes.
!
Because a slow shutter speed is used, a tripod
should be used to prevent camera shake.
Use this mode for slow synchro shots with red-
eye reduction.
?
Red-Eye Reduction + Slow Synchro
To take a picture of a main subject at night with the
background brightly lit, please use the E mode
/ (Night Scene) settings (P.45).
n
Red-Eye Reduction
Use this mode to ensure that the subjects eyes
appear natural when photographing people in
low-light conditions.
The flash fires a pre-flash just before the picture
is taken and then fires again to take the actual
picture.
Use this mode for ordinary photography. The
flash fires automatically as required by the
shooting conditions.
c
Auto Flash Mode
Red-Eye Effect
When you use the flash to photograph people in low-light conditions, their eyes sometimes appear red in
the picture. This is caused by the light of the flash reflecting off the inside of the eye. Use Red-Eye
Reduction flash to effectively minimize the likelihood of the red-eye effect.
Take the following measures also to make Red-Eye Reduction more effective:
h Get the subjects to look at the camera. h Get as close as possible to the subjects.
I FLASH
37
2
36
e MACRO
(
CLOSE-UP
)
PHOTOGRAPHY
60
1M1M 1M 1M
Selecting Macro mode allows you to take close-
up shots.
Effective Photography Range:
Approx. 10 cm to 80 cm (3.9 in. to 2.6 ft.)
!
Macro photography is automatically cancelled in the
following situations:
When you have switched photography modes
When the camera is switched off
!
When you set the mode, the e icon is briefly
displayed larger.
!
If you are shooting in a dark location (when the \
camera shake warning icon is displayed), use a tripod
to prevent camera shake.
Press the e Macro button (d). The e
appears on the screen indicating that you can
take close-up shots.
To cancel Macro mode, press the e Macro
button (d) again.
When you are using the flash
h Effective shooting
range:
Approx. 30 to 80 cm
(1 ft. to 2.6 ft.)
!
In E photography mode, you can only select the
Macro setting for
t mode (Continuous shooting).
Suppressed Flash
Pressing the flash down switches the camera to
Suppressed Flash mode.
Use this mode for photography using indoor
lighting, for shots taken through glass, and for
photography in venues such as theaters or at
indoor sporting events where the distance is too
great for the flash to be effective. When you use
Suppressed Flash, the Auto White Balance
function (P.130) operates so that natural colors
are captured along with the ambience of the
available light.
!
If you are shooting in Suppressed Flash mode in dark
conditions, use a tripod to prevent camera shake.
!
See P.26, 122 for information on the camera shake
warning.
I FLASH
h Check that the flash is popped up.
h When , (Landscape) or t (Continuous
Shooting) is selected in E (Scene Position)
mode, the flash mode is set to Suppressed
Flash even when the flash is popped up.
When you cannot change the
flash settings
SCENE SCENE
NIGHT SCENE NIGHT SCENE
SPORT SPORT
CONT. CONT.
SCENE POSITIONSCENE POSITION
When you use the flash in Macro mode, remove
the lens adapter ring.
If the adapter ring is not removed, a shadow
may appear in the bottom center of your shot.
39
2
38
MULTI-FRAME PLAYBACK
w
PLAYBACK
Text displayed
No text displayed
Multi-frame playback
1 2
01 02
!
The screen text display disappears after approximately
3 seconds.
!
Playback zoom cannot be used with multi-frame
playback.
In playback mode, the display shown on the
screen switches each time you press the DISP
button. Press the DISP button until the multi-
frame playback screen (9 frames) appears.
1 Select a frame by using d, c, a and b
button to move the cursor (the orange box) to
the desired frame. Press a or b several
times to switch to the previous page or the
next page.
2 You can enlarge the selected image by
pressing the DISP button again.
VIEWING YOUR IMAGES
(
PLAYBACK
)
w
PLAYBACK
During playback, you can skip backwards or
forwards through the images (the frame number
increases or decreases) by holding down d or
c for approximately 1 second.
The displayed image does not change, but a
progress bar indicates the approximate playback
location on the xD-Picture Card.
1Set the Power switch to
w.
2Use the d and c button to move forward
and backward respectively through your
images.
!
When you set the Power switch to q, the last
image shot is displayed.
!
You can use this camera to play back still images
recorded on an FinePix S304 or still images (excluding
some uncompressed images) recorded on any
FUJIFILM digital camera that supports xD-Picture
Cards.
100−0005
Playback frame number
01 02
Fast Forwarding Images
41
2
40
ERASING SINGLE FRAME
w
PLAYBACK
1 Set the Power switch to w.
2 Press the MENU/OK button to display the
Menu on the screen.
Press a or b to select FRAME in the
pERASE menu and press the MENU/OK
button.
See P.61 for more information on ALL FRAMES
and FORMAT.
1 2
ERASEERASE
FRAME FRAME
FORMAT
BACK BACK
ALL FRAMES
ERASEERASE
FRAME FRAME
FORMAT
BACK BACK
ALL FRAMES
01 02
!
To revert to image playback without erasing the image,
select BACK and press the MENU/OK button.
Note that mistakenly erased images cannot be
recovered. You should copy important files that
you do not want to be erased to your computer
or another media.
PLAYBACK ZOOM
w
PLAYBACK
This function is useful for things such as checking the focus of shots you have taken. Pressing a
during single-frame playback switches you to the zoom screen.
Quality
Maximum Zoom Scale
3M F/N (2048 × 1536)
12.8×
2M (1600 × 1200)
10.0×
1M (1280 × 960)
8.0×
0.3M (640 × 480)
4.0×
Single-frame Playback
Zoom
Panning
dc
Switch to zoom
View another frame
a
dc
Change zoom scale
View another frame
ab
BACK
dc
ab
BACK
Revert to single-
frame playback
View a different area
Revert to single-
frame playback
DISPDISP
DISPDISP
PANNINGPANNING
ZOOMZOOM
!
It may not be possible to play back shots taken on other camera models.
!
Playback zoom cannot be used during multi-frame playback.
43
3
42
ADVANCED FEATURES PHOTOGRAPHY
3
Advanced Features
Photography
The Advanced Features Photography section introduces a range of camera functions that you can
access by setting the Power switch to q.
Photography Mode Specifications
c
d
z FLASH (c/
n
/z/v/
?
)
e MACRO (ON/OFF)
y Quality (Still image: 0.3M/1M/2M/3M N/3M F)
(Movie: $/#)
= SELF-TIMER (ON/OFF)
E
SCENE POSITION (m/,/.///A)
d EV (Exposure compensation 2.1 to +1.5)
a WHITE BALANCE (8/-/0/9/7/6/R)
N A.PRIORITY (AUTO/F2.8/F4.8/F8.2)
KSHARPNESS (HARD/NORMAL/SOFT)
x
FLASH (Flash brightness adjustment 0.6 to +0.6)
g OPTION
(
SETUP/LCD BRIGHTNESS)
OK
OK
OK
OK
OK
OK
1
2
OK
OK
OK
1
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
R (AUTO)
E
(SCENE
POSITION)
W (MANUAL) T (MOVIE)
1 Restrictions apply to the available flash modes depending on the E Scene Position menu setting in E mode
(P.45).
2 In
E photography mode, you can only select the Macro setting for t mode (Continuous shooting).
Menu
ERASING SINGLE FRAME
w
PLAYBACK
4
Press d or c to view the frame (selected file)
you want to erase.
3
OK
100−0005
BACK
ERASE OK?
FRAME
YES
NO
!
Press the BACK button to cancel erasing single
frame .
Pressing the MENU/OK button erases the
frame (selected file) displayed. When erasing is
complete, the next image appears and the
§ message is displayed.
To erase another frame, repeat steps and .
43
45
3
44
The
E
Scene Position setting allows you to
select any of 5 modes to suit the scene you are
shooting. See P.46 for details.
1Press the MENU/OK button to display the
menu.
2Press d or c to select
E
Scene Position
and then press a or b to change the
setting.
3Press the MENU/OK button to confirm the
selection.
E SCENE POSITION
q
STILL IMAGE
SPORT SPORT
PORTRAIT PORTRAIT
SCENE SCENE
NIGHT SCENENIGHT SCENE NIGHT SCENENIGHT SCENE
SCENE POSITIONSCENE POSITION
03 02
Available menu options
y QUALITY
= SELF-TIMER
E
SCENE POSITION
g OPTION
01
This is the simplest photography mode to use
and is suitable for the widest range of shots.
Available menu options
y QUALITY
= SELF-TIMER
g OPTION
Available menu options
y QUALITY = SELF-TIMER
d EV a WHITE BALANCE
NA.PRIORITY KSHARPNESS
z FLASH g OPTION
Manual mode lets you specify a range of
different menu settings for taking pictures.
hMenu options only available in Manual mode
Brightness (exposure compensation), white
balance, aperture priority, sharpness, flash
(flash brightness adjustment)
R
Auto mode
W
Manual mode
R
/
W
MANUAL
q
STILL IMAGE
47
3
46
Approx.
40.6 min.
Approx.
12.9 min.
DPC-128 (128MB)
Approx.
20.2 min.
DPC-64 (64MB)
Approx.
10.1 min.
Approx.
191 sec.
DPC-32 (32MB)
Approx.
5 min.
Approx.
94 sec.
DPC-16 (16MB)
$#
Available shooting time
xD-Picture Card
Capacity
Approx.
6.4 min.
!
Because the audio is recorded as you shoot, take care
not to cover the microphone with your finger (P.8).
!
Depending on the available space on the xD-Picture
Card, the available shooting time per movie may be
shorter.
!
It may not be possible to play back your movie on
other cameras.
The available shooting time and the œ
message are shown on the screen.
T Movie mode allows you to shoot videos with
sound. Depending on the yQuality number of
recorded pixels setting (P.51), the maximum
recording time for a single movie is either 200
seconds $ or 60 seconds #.
hMovie format: Motion JPEG (P.130)
# (320 × 240 pixels) or
$ (160 × 120 pixels)
selectable
10 frames per second
With sound
1
xD-Picture Card standard shooting time
The available shooting time when the xD-Picture Card is
formatted in the camera.
T MOVIE
(
VIDEO
)
q
MOVIE
2
60s
STANDBY
Use this mode for daytime shots of scenery.
Landscape mode provides crisp, clear shots of
buildings, mountains and other scenery.
hWhen using the flash
The Flash mode is automatically set to
Suppressed Flash. This setting cannot be
changed.
,
Scene
Use this mode for shots taken in the evening or
at night.
hShutter
Slow shutter speed mode with speeds as slow
as 3 seconds
hWhen using the flash
Slow Synchro, Red-Eye Reduction+Slow
Synchro only
/
Night Scene
Use this mode for shots of people. Portrait mode
provides soft-tone images with natural skin colors.
hWhen using the flash
Auto Flash, Red-Eye Reduction, Forced Flash,
Slow Synchro, Red-Eye Reduction + Slow
Synchro
.
Sports
Use this mode for moving objects.
hShutter
Takes pictures using fast shutter speeds.
hWhen using the flash
Auto Flash or Forced Flash only
A
Cont.
Use this mode for continuous shooting without
limiting the photographic scenes.
hNumber of continuous shots: 2
hFocusing Exposure, White Balance:
Set when the first frame is shot.
hFlash: The flash is automatically set to
Suppressed Flash mode.
m
Portrait
E SCENE POSITION
q STILL IMAGE
49
3
48
59s
REC
!
Once the remaining time runs out, movie recording
automatically stops and the movie is stored on the
xD-Picture Card.
During shooting, a timer in the top-right corner of
the screen counts down the remaining time.
!
If you end shooting immediately after you start
shooting, only 1 second of movie is shot.
Press the shutter button again during shooting to
end the movie.
5
6
T MOVIE
(
VIDEO
)
q MOVIE
60s
Zoom bar
STANDBY
In Movie mode, the lens is locked at the wide-
angle setting and only the digital zoom can be
used. You can use a (T TELE Zoom) and b
(W WIDE Zoom) to zoom in and out. A zoom
bar is displayed on the screen.
3
!
When the camera is used to shoot a movie, you can
get brighter images by using a light source such as a
fluorescent lamp to illuminate the subject.
!
You do not need to hold down the shutter button.
!
The focus is fixed at 80 cm (2.6 ft.) to infinity.
!
The focus and white balance remain fixed during
shooting, but the exposure automatically changes to
suit the scene.
!
The image shown on the screen before you take the
shot may differ in its brightness, color, etc. from the
image shown on the monitor during movie recording.
Shooting begins when you fully depress the
shutter button.
4
The white balance is automatically set when you
fully depress the shutter button.
Digital zoom focus distance
(35 mm camera equivalent)
Max. Zoom
Scale
Approx. 38 mm-95 mm
Approx. 38 mm-190 mm
2.5×
5×
#
$
Quality
51
3
50
y
SETTING QUALITY MODE
(
NUMBER OF RECORDED PIXELS FOR IMAGES
)
Displaying the menus (P.50)
PHOTOGRAPHY MENU
Use the y QUALITY setting to specify the
number of recorded pixels.
3M · F (2048 × 1536)
3M · N (2048 × 1536)
1M (1280 × 960)
0.3M ( 640 × 480)
#
( 320 × 240)
$
( 160 × 120)
2M (1600 × 1200)
For Printing
For
the Internet
Still image
(R · E ·
W)
Movie
(u)
Quality (pixels) Usage
2M 40
2020
3M・N
120
1M
03M
60
QUALITYQUALITY
Continued on next page...
PHOTOGRAPHY MENU OPERATION
!
The accessible menu settings differ depending on
the photography mode.
When you validate the settings, the respective
icons appear at the top of the screen (Example
showing the camera in AUTO mode with the self
timer set.).
60
1M1M 1M 1M
2
1Press the MENU/OK button to display the
menu.
2Use d and c to select the menu item and
a and b to change the setting.
3Press the MENU/OK button to confirm the
selection.
1
0301 02
53
3
52
=
SELF-TIMER PHOTOGRAPHY
PHOTOGRAPHY MENU
Displaying the menus (P.50)
Bebeep
ON
OFF
SELF−TIMERSELF−TIMER
1
60
1M1M 1M 1M
2
01
02 03
60
1M1M 1M 1M
The self timer can be set in the R, E and
W modes.
When you set the self-timer to ON, = appears
on the screen.
In this mode, a timer runs for roughly 10 seconds
before the shutter is released. Use this mode for
shots such as photographs of yourself.
1 Position the AF frame over your subject.
2 Press the shutter button down half way to set
the focus.
3Without releasing the shutter button, press it
down fully. The self-timer then starts running.
!
The self timer is automatically switched off in the
following situations:
When shooting ends
When the Mode dial setting is changed
When the mode is switched between photography
and playback
When the camera is switched off
!
You can also use the AF/AE lock (P.29).
!
Be careful not to stand in front of the camera when
you press the shutter button as this can cause
focusing or exposure metering errors.
Continued on next page...
y
SETTING QUALITY MODE
(
NUMBER OF RECORDED PIXELS FOR IMAGES
)
Displaying the menus (P.50)
PHOTOGRAPHY MENU
Still image
(
R · E · W
)
Any of 5 settings can be selected.
Choose the setting that best suits your needs.
<Examples>
i To print at A4-size 3M F or 3M N
Select 3M F for better quality and 3M N for more
shots.
Normally the 3M
N setting provides sufficiently
high quality for printing.
i To print at A5 size 2M
i To print at A6 (postcard) size 1M
i To use the image as an e-mail attachment
0.3M
2M 40
2020
3M・N
120
1M
03M
60
QUALITYQUALITY
Movie
(
u
)
You can select 2 levels of quality. For better
image quality, select # , and for longer
photography time, select $.
320x240
160x120
QUALITYQUALITY
55
3
54
+0.3
 0
−0.3
−0.6
EVEV
This mode can be selected in the W photography
mode.
Use the Exposure compensation setting to
obtain the optimum image brightness (exposure)
when the subject is much brighter or darker than
the background.
hCorrection range:
2.1 EV to
+
1.5 EV (13 steps: 0.3 EV increments)
See P.130 for more information on EV.
hCopying of printed text (black characters
on white paper) (+1.5 EV)
hBacklit portraits (+0.6 EV to +1.5 EV)
hLocations with very bright backgrounds
or strong reflections, such as ski resorts:
(+0.9 EV)
hShots made up predominantly of sky.
(+0.9 EV)
hSpotlit subjects, particularly against dark
backgrounds (0.6 EV)
hCopying of printed text (white characters
on black paper) (0.6 EV)
hScenes with low reflectivity, such as shots
of pine trees or dark foliage (0.6 EV)
Guide to using + (positive) compensation
Guide to using (negative) compensation
Subjects for Which Exposure
Adjustment is Particularly Effective
!
The Exposure compensation setting is disabled in the
following situations:
When the flash is used in Auto or Red-Eye
Reduction mode.
When dark scenes are shot in Forced Flash mode.
Displaying the menus (P.50)
d
EV
(
EXPOSURE COMPENSATION
)
PHOTOGRAPHY MENU
=
SELF-TIMER PHOTOGRAPHY
PHOTOGRAPHY MENU
3
The self timer lamp lights for 5 seconds and then
starts blinking. 5 seconds later the camera
makes a clicking noise and takes the picture.
Until the picture is taken, a countdown appears
on the screen.
Self-timer mode is automatically cancelled after
each shot.
!
To stop the self-timer once it has started running,
press the BACK button.
4
57
3
56
x
FLASH
(
FLASH BRIGHTNESS ADJUSTMENT
)
+0.3
 0
−0.3
−0.6
FLASHFLASH
This mode can be selected in the W
photography mode.
Flash brightness adjustment allows you to
change only the amount of light emitted by the
flash to suit the photography conditions or to
achieve a desired effect.
hAdjustment range:
0.6 to +0.6 EV (5steps: 0.3 EV increments)
See P.130 for more information on EV.
!
Depending on the subject and the shooting distance,
adjusting the flash brightness may have little or no
effect.
NORMAL NORMAL NORMAL
SOFT
HARD
SHARPNESSSHARPNESS
This mode can be selected in the W
photography mode.
Use this setting to soften or emphasize outlines
or to adjust the image quality.
h3 levels of sharpness are available
HARD : Emphasizes the outlines.
Best for shots of subjects such as
buildings or text where you want
sharp images.
NORMAL : Best for ordinary photography.
Provides edge sharpness that is
ideal for ordinary shots.
SOFT : Softens the outlines.
Best for shots of subjects such as
people, where a softer image is
desirable.
PHOTOGRAPHY MENU
K SHARPNESS
PHOTOGRAPHY MENU
Displaying the menus (P.50)
PHOTOGRAPHY MENU
a WHITE BALANCE
(
SELECTING THE LIGHT SOURCE
)
AUTO
WHITE BALANCEWHITE BALANCE
AUTO: Automatic adjustment
(Shooting to show the ambience of the
light source)
6
: Shooting outdoors in fine weather
7
: Shooting in shade
9
: Shooting under Daylight fluorescent
lamps
0
: Shooting under Warm White fluorescent
lamps
-
: Shooting under Cool White fluorescent
lamps
8
: Shooting in incandescent light
When the flash fires, the white balance set for the
flash is used. To achieve a particular desired effect,
set the flash mode to Suppressed Flash (P.36).
This mode can be selected in the W photography
mode.
Change the white balance setting when you
want to take a picture with the white balance
fixed for the surroundings and lighting when the
picture is taken.
In AUTO mode, the correct white balance may
not be obtained for subjects such as close-ups
of peoples faces and shots taken under a
special light source. In such situations, select
the correct white balance for the light source.
See P.130 for information on the white balance.
59
4
58
!
Take care not to block the speaker.
!
If the sound is difficult to hear, adjust the volume
(P.79).
!
If the subject of the movie is very bright, white
streaks may appear on the image during playback.
This is normal and is not a fault.
!
Movies cannot be played back using multi-frame
playback. Use the DISP button to revert to normal
playback.
1Press b to play the movie.
2The screen shows the playback time and a
playback progress bar.
1Set the Power switch to Q.
2Use d or c to select the movie file.
PLAYING BACK MOVIES
(
VIDEO
)
4
Advanced
Features Playback
18s
PAUSE
STOP
01
02
123−0009
 6/18/2002
PLAY
21
01 02
Indicated by the u icon.
F8.2
F4.8
F2.8
AUTO
A.PRIORITYA.PRIORITY
This mode can be selected in the W photography
mode.
This is an automatic mode that allows you to set
the aperture. You can use this mode to take
shots with a blurred background (wide aperture)
or with both foreground and background in sharp
focus (narrow aperture).
hAperture settings: F2.8/F4.8/F8.2
Shutter speed (auto): 1/2 to 1/1500 sec.
1/1500 F8.2
Displayed in red
If the shutter speed is displayed in red when the
shutter button is pressed down halfway, the shot
is overexposed or underexposed. Change the
aperture setting until the correct exposure is
obtained.
N APERTURE-PRIORITY AUTO
PHOTOGRAPHY MENU
!
c (Auto) flash mode cannot be used in Aperture-
Priority mode.
61
4
60
1
01 02
ERASEERASE
FRAME FRAME
FORMAT
BACK BACK
ALL FRAMES
2
1Set the Power switch to Q.
2Press the MENU/OK button to view the
menu screen.
Use g to select
p ERASE.
p ERASING SINGLE
ALL FRAMES/FORMAT
w
PLAYBACK MENU
Note that mistakenly erased images cannot be
recovered. You should copy important files that
you do not want to be erased to your computer
or another media.
Playing back movie files
i This camera may not be able to play back movie files (10 fps) that were recorded on a camera other than FinePix S304.
i To play back movie files on a computer, save the movie file on the xD-Picture Card to the computes hard disk and then
play back the saved file.
i Video files contain large amounts of data. Depending on the performance of the computer, movies may not run smoothly
if the computer cannot process the images quickly enough.
The movie automatically stops when playback ends.
Playback
Control Description
Pauses the movie during playback.
Press this button again to resume playback.
Pause/Resume
Stops playback.
Press d or c while movie playback is stopped to go back
to the previous file or advance to the next file respectively.
Stop
Press these during playback to skip forwards or backwards
through the movie.
Fast forward/Rewind
i Each time you press d or c when the movie is paused,
the movie advances or goes back one frame.
i Hold down the button to move through the frames quickly.
Skip playback
PLAYING BACK MOVIES
(
VIDEO
)
Playing back movies
When paused
Rewind Fast forward
63
4
62
Frame All frames
OK
100−0005
BACK
ERASE OK?
FRAME
YES
NO
01 02
1Use d and c to select the file to be erased.
2Press the MENU/OK button to erase the
currently displayed file.
To erase another image, repeat steps 1 and 2.
When you have finished erasing images, press
the BACK button.
Pressing the MENU/OK button erases all the
unprotected files.
100−0005
 ERASE ALL
    OK?
IT MAY
TAKE A WHILE
ALL FRAMES
OK
BACK
YES
NO
!
The file for which ˆ was displayed
cannot be erased. Remove the protection.
If the
©
ø
message appears, press
the MENU/OK button once more to erase the image.
1Use a or b to select FRAME, ALL
FRAMES or FORMAT.
2Press MENU/OK button to confirm your
selection.
ERASEERASE
FRAME FRAME
FORMAT
BACK BACK
ALL FRAMES
01 02
Back
Returns to playback without erasing
any files.
Frame
Erase only the selected file.
All frames
Erases all unprotected files.
You should copy important files that
you do not want to be erased to your
computer or another media.
Format
Erases all the files. Because formatting
also erases protected files, check
carefully before formatting a card and
copy any files that you want to keep
onto another media, such as your hard
disk.
3
p ERASING SINGLE
ALL FRAMES/FORMAT
w
PLAYBACK MENU
65
4
64
1
01 02
Protection is a setting that prevents images from
being accidentally erased. However, FORMAT
erases all images, regardless of a PROTECT
ALL setting (P.64).
FRAME SET/RESETFRAME SET/RESET
UNPROTECT ALLUNPROTECT ALL
PROTECT ALLPROTECT ALL
PROTECTPROTECT
2
1Set the Power switch to Q.
2Press the MENU/OK button to view the
menu screen.
Use d or c to select
k
PROTECT.
k
PROTECTING IMAGES FRAME/ALL
w
PLAYBACK MENU
Format
100−0005
FORMAT
FORMAT OK?
  ERASE
 ALL DATA
OK
BACK
YES
NO
Pressing the MENU/OK button erases all the
files and initializes the xD-Picture Card.
Formatting erases protected files also.
!
If the , ƒ, å or
˙ message appears, refer to P.122,
123 before formatting the xD-Picture Card and take the
appropriate measures.
p ERASING SINGLE
ALL FRAMES/FORMAT
w
PLAYBACK MENU
67
4
66
Frame set/ Reset
OK
100−0005
BACK
PROTECT OK?
FRAME SET
/RESET
01 02
1 Press d or c to select the file to be
protected.
2 Press the MENU/OK button to protect the
file currently displayed.
To protect another file, repeat steps 1 and 2.
To finish protecting files, press the BACK
button.
To remove the protection, press the MENU/OK
button again.
OK
100−0005
BACK
UNPROTECT
   OK?
FRAME SET
/RESET
1 2
k
PROTECTING IMAGES FRAME/ALL
w
PLAYBACK MENU
1Press a or b to select UNPROTECT ALL,
PROTECT ALL or FRAME SET/RESET.
2Press MENU/OK button to confirm your
selection.
FRAME SET/RESETFRAME SET/RESET
UNPROTECT ALLUNPROTECT ALL
PROTECT ALLPROTECT ALL
PROTECTPROTECT
01 02
Protects or unprotects only the
selected file.
Removes the protection from all the
files.
Protects all the files.
Frame set/Reset
Unprotect all
Protect all
3
69
4
68
DPOF stands for Digital Print Order Format and refers to a format that is used for
recording printing specifications for images shot using a digital camera on media such as
xD-Picture Card. The recorded specifications include information on which frames are to
be printed.
This section gives a detailed description of how to order your prints with the FinePix S304.
On the FinePix S304, you can specify only one print per image in the DPOF settings.
Note that some printers do not support date and time imprinting or specification of the
number of prints.
Note that the warnings shown below may be displayed while you are specifying the
prints.
©
ø (P.63)
When you erase the image, the DPOF setting for that image is deleted at the same time.
¥ (P.73)
If you load an xD-Picture Card that contains frames specified for printing on another
camera, those print specifications are all reset and replaced by the new print
specifications.
(P.124)
Up to 999 frames can be specified on the same xD-Picture Card.
i HOW TO SPECIFY PRINT OPTIONS
(
DPOF
)
w
PLAYBACK MENU
Protect all
Press the MENU/OK button to protect all the
files.
OK
100−0005
BACK
PROTECT ALL
    OK?
PROTECT
ALL
IT MAY
TAKE A WHILE
Press the MENU/OK button to unprotect all the
files.
Unprotect all
OK
100−0005
BACK
UNPROTECT
ALL OK?
UNPROTECT
ALL
IT MAY
TAKE A WHILE
k
PROTECTING IMAGES FRAME/ALL
w
PLAYBACK MENU
!
To interrupt the procedure before it is completed,
press the BACK button.
!
To interrupt the procedure before it is completed,
press the BACK button.
71
4
70
1Press a or b to select DDATE.
2Use d and c to select DATE ON or
DATE OFF.
The selected setting is then valid for all frames
with DPOF settings.
DPOFDPOF
DATE/ONDATE/ON
OK
3
01
02
DPOFDPOF
DATE/ONDATE/ON
OK
4
01
02
1Press a to select OK.
2Press the MENU/OK button.
1
01 02
DPOFDPOF
DATE/OFFDATE/OFF
OK
2
1Set the Power switch to Q.
2Press the MENU/OK button to display the
menu screen.
Use d or c to select
i DPOF.
i DPOF SET FRAME
w
PLAYBACK MENU
73
4
72
Pressing the MENU/OK button confirms the
DPOF settings.
Pressing the BACK button returns you to the
settings screen .
5
100−0005
OK
BACK
DPOF
TOTAL/001
FINISH OK?
7
Pressing the MENU/OK button confirms all the
settings.
100−0005
OK
BACK
DPOF
RESET DPOF
   OK?
If you select a frame for which DPOF settings have
already been specified, the
¥
message appears.
Pressing the MENU/OK button erases all of
the DPOF settings already specified for each
frame. You must then specify the DPOF setting
for each frame again.
!
Press the BACK button to leave the previous
settings unchanged.
!
During playback, check that the i icon is
displayed for the previous settings.
i DPOF SET FRAME
w
PLAYBACK MENU
35
100−0005
OK
BACK
DPOF
NO
YES YES
FINISH
TOTAL/000
01
02
100−0005
OK
BACK
DPOF
NO
YES YES
FINISH
TOTAL/000
6
1 Use d or c to display the frame for which
you want to specify DPOF settings.
2 Press a or b to set YES for the frame to
be printed and then press the MENU/OK
button or c.
To specify more DPOF settings, repeat steps 1
and 2.
!
DPOF settings cannot be specified for movies.
!
TOTAL shows the total number of frames for which
prints have been ordered.
When you have finished the settings, always
select FINISH and press the MENU/OK
button.
If you press the BACK button, no DPOF settings
are specified.
!
You can only specify one print per frame in the DPOF
settings. Note also that you can specify prints for up
to 999 frames on the same xD-Picture Card.
Individual DPOF settings cannot be
changed.
75
4
74
The ® message appears on the
screen. Recording begins when you press the
MENU/OK button.
OK
BACK
30s
VOICE MEMO
REC STANDBY
START
CANCEL
3
OK
BACK
20s
RECORDING
REC
RESTART
VOICE MEMO
4
Face the microphone as
you record the voice
memo. Hold the camera
roughly 20 cm (7.9 in.)
away for the best
results.
Microphone
During recording, the remaining time is shown
on the screen and the self-timer lamp blinks.
When the time remaining reaches 5 seconds,
the self-timer lamp starts blinking quickly.
!
To end your comment during recording, press the
MENU/OK button.
r RECORDING VOICE MEMOS
w
PLAYBACK MENU
2
VOICE MEMOVOICE MEMO
ON
0301 02
1
!
You can also add voice memos to images (still
images) shot on other cameras, provided they can
be played back on this camera.
!
Voice memos cannot be added to movies.
01 02
1Set the Power switch to Q.
2Use d and c to select the image (still
image) to which you want to add a voice
memo.
1Press the MENU/OK button to display the
menu.
2Use d or c to select
r VOICE MEMO.
3Press the MENU/OK button.
77
4
76
PLAYING BACK VOICE MEMOS
w
PLAYBACK MENU
123−0008
 6/18/2002
PLAY
21
11s
PAUSE
STOP
01 02
!
You cannot play back voice memos using multi-
frame playback. Use the DISP button to revert to
normal playback.
1Set the Power switch to Q.
2Use d or c to select an image file that
has a voice memo.
The r icon is displayed.
1 Press b to play the voice memo.
2 The screen shows the playback time and a
playback progress bar.
!
Take care not to block the speaker.
!
If the sound is difficult to hear, adjust the volume
(P.79).
01
02
r RECORDING VOICE MEMOS
w
PLAYBACK MENU
OK
BACK
FINISH
REC
RESTART
VOICE MEMO
5
If you select an image that already has a voice
memo, a screen appears in which you can
select whether or not to rerecord the caption.
When you have recorded 30 seconds of
comment, the message appears on
the screen.
To finish: Press the MENU/OK button.
To re-record your comment: Press the BACK
button.
When the image already has
a voice memo
RE/REC
VOICE MEMOVOICE MEMO
BACK
79
5
78
!
To exit this procedure without changing the settings,
press the BACK button.
When you select the BRIGHTNESS or
VOLUME menu option, an adjustment bar
appears on the LCD monitor or viewfinder (EVF).
1Use d and c to adjust the screen
brightness or speaker volume.
2Press the MENU/OK button to confirm the
new setting.
g LCD BRIGHTNESS/VOLUME
1 2
01 02
5 Settings
トータル/000
OK
BACK
BRIGHTNESSBRIGHTNESS
トータル/000
OK
BACK
VOLUMEVOLUME
PLAYING BACK VOICE MEMOS
w
PLAYBACK MENU
The voice memo automatically stops when playback ends.
Playback
Control Description
Pauses the voice memo during playback.
Press this button again to resume playback.
Pause/Resume
Stops playback.
Press d or c while voice memo playback is stopped to
go back to the previous file or advance to the next file
respectively.
Stop
Press these during playback to skip forwards or backwards
through the voice memo.
These buttons do not function while playback is paused.
Fast forward/Rewind
Playing back voice memos
Rewind Fast forward
81
5
80
SETUP Menu Options (Date/time setting, etc.)
Settings Display
Explanation
POSTVIEW
USB MODE
POWER SAVE
DATE/TIME
ON/OFF
DSC/PC CAM
ON/OFF
SET
This option specifies whether or not an image checking screen (photography
results) is displayed after you take a shot.
The photography results are displayed for about 2 seconds and then
automatically recorded.
In continuous shooting, the photography results are displayed for a set time
before being automatically recorded even if this option is set to OFF.
See P.96 for details.
This function temporarily switches the screen off if the camera is not used for
approximately 30 seconds. See P.82 for details.
Use this option to correct the date or time. See P.20 for details.
Factory
default
ON
DSC
OFF
SOUND
LOW/HIGH/OFF
This option allows you to set the volume of the beep emitted when the camera
controls are used.
LOW
RESET ALL
OK
Except for the DATE/TIME and LANGUAGE settings, this function resets all the
camera settings (including the photography and playback menu settings) to the
factory default values set at shipment. When you press c, a confirmation
screen appears. To proceed, press the MENU/OK button again.
LANGUAGE
ENGLISH/FRANCAIS/
DEUTSCH
Select English, French or German as the language used for screen display.
ENGLISH
List of settings
BRIGHTNESS (P.79)
SETUP
q Still Image mode
BRIGHTNESS (P.79)
SETUP
T Movie mode
VOLUME (P.79)
BRIGHTNESS (P.79)
SETUP
w Playback mode
1Press a or b to select a menu option and
then press d or c to change the setting.
2Press the MENU/OK button.
You can use SETUP in any mode.
1Press the MENU/OK button to display the
menu screen.
2Press d or c to select
g OPTION and
then press a or b to select SETUP.
3Press the MENU/OK button.
!
Press c for DATE/TIME or RESET ALL.
OK
BACK
POWER SAVEPOWER SAVE
DATE/TIMEDATE/TIME
USB MODEUSB MODE USB MODEUSB MODE
OFF
DSC
SET
SET−UPSET−UP
POSTVIEWPOSTVIEW
ON
2
LCD BRIGHTNESSLCD BRIGHTNESS
OPTIONOPTION
SET−UP
1
01
0201
0203
g USING SET–UP
Still Photography
Screen
83
6
82
POWER SAVE
SET–UP
When the camera is in sleep mode, pressing the
shutter button down halfway brings the camera
back to full operational mode. This is a useful
feature as it allows you to take pictures more
quickly than switching the camera off and then
on again. You can also take a picture by pressing
the shutter button all the way down.
!
Operation can also be restored by pressing buttons
other than the shutter button.
Bebeep
To restore power to the camera
Turn the Power switch to
OFF briefly and then
back to q.
OK
BACK
POWER SAVEPOWER SAVE
DATE/TIMEDATE/TIME
USB MODEUSB MODE USB MODEUSB MODE
OFF
DSC
SET
SET−UPSET−UP
POSTVIEWPOSTVIEW
ON
hPower saving OFF(default setting)
The camera does not use measures such as
sleep to reduce power consumption. However, if
the camera is not used for approximately 2 minutes,
this function automatically switches the camera off.
hPower saving ON
Power consumption is kept to a minimum to
prevent battery depletion.
i If the camera is not used for approximately 30
seconds, the screen switches off temporarily
to reduce power consumption (Sleep mode).
i Once the camera is in Sleep mode, if it is left
unused for a further 90 seconds, it is
automatically switched off.
i The charging time for the flash increases
slightly because the flash charging power is
reduced.
Software needed for playing back movies, etc.
Launches the FinePixViewer
software when a camera is
connected.
Software used to read PDF-format documents on a
personal computer. This software is needed to read the
User’s Guides for FinePixViewer.
Creates a FinePix CD Album.
Used for videoconferencing (Windows only)
Allows you to display thumbnail lists of the
images stored on your PC or in the camera,
print the images individually or as an index,
display the images at full size and perform
some basic image processing.
Note that the software configuration differs slightly depending on your operating system.
Connect the camera
with “DSC” selected as
the USB setting
(P.96).
Connect the camera
with “PC CAM”
selected as the USB
setting (P.99).
Allows a digital camera to be used
as USB Mass Storage (removable
disk drive, card reader).
Allows a digital camera to be
used as a PC Camera.
ImageMixer VCD
for FinePix
FinePixViewer
PictureHello
Acrobat Reader
R
QuickTime
USB PC Camera
Driver
Exif Launcher
USB Mass Storage
Driver
6 Software Installation
6.1 The Software Components
85
6
84
6.2 Installation on a Windows PC
6.2.1 Load the CD-ROM into your PC
1. Switch on your PC and start up Windows.
If you have already switched on your PC, restart
your PC at this point.
Users of Windows 2000 or Windows XP should log in
using a system administrator account (e.g.
Administrator).
2. Quit all other active applications until no
applications are shown in the taskbar.
If a ----.dll file not found. message appears during
installation, there is another application running in the
background. Forcibly shut down the application. Refer
to your Windows manuals for information on how to
forcibly shut down an application.
3. Load the enclosed CD-ROM into the CD-ROM
drive. The installer starts up automatically.
NOTE
NOTE
Do not connect the camera to your PC until
the software installation is completed.
4. The Setup screen appears. Click the
[Installing FinePixViewer] button.
For more information on what is installed, click the
[Read Me First] button and [Using FinePixViewer]
button.
Launching the Installer Manually
1. Double-click the My Computer icon.
Windows XP users should click My
Computer in the Start menu.
2. Right-click FINEPIX (CD-ROM drive) in
the My Computer window and select
Open.
3. Double-click SETUP or SETUP.exe
in the CD-ROM window.
The way file names are displayed differs as
described below depending on your computer
settings.
File extensions (3-letter suffixes indicating
the file type) may be shown or hidden. (e.g.
Setup.exe or Setup)
Text may be shown normally or all in
uppercase (e.g. Setup or SETUP).
1. Pre-installation checking begins. If any
warning messages appear, follow the
instructions given on the screen.
The Add New Hardware Wizard may be hidden
behind the Note message. Check the taskbar,
move the message window and then click the
[Cancel] button.
6.2.2 From FinePixViewer installation to restart
87
6
86
3 Check the installation destination folder and then
click the [Next >] button.
4 Confirmation screen shown may appear. To
continue with the settings, click the [Yes] button.
2. A confirmation message appears asking
whether you want to continue with the
installation. Click the [OK] button.
3. The software version is checked. If the
window shown below appears, click the
[OK] button to uninstall the software.
4. The USB drivers are installed.
5. Install FinePixViewer.
1 FinePixViewer installation begins and notes and
warnings are displayed. When you have
confirmed these, click the [Next >] button.
2 The User License Agreement for this software is
displayed. Read the agreement carefully and
then, if you agree to the terms of the Agreement,
click the [Yes] button. If you click the [No] button,
the software is not installed.
6. Install QuickTime as directed by the on-
screen instructions.
If you have already installed QuickTime version
5.0.2 or later, this installation is not performed.
Click [Agree] button in the Software License
Agreement window.
If the Connection speed window appears, set the
correct speed for your environment of connection and
then click the [Next] button.
If you do not know your connection speed, simply
click the [Next] button.
7. Install NetMeeting as directed by the on-
screen instructions.
If NetMeeting 3.01 or later is already installed on
your PC, this installation is not performed.
8. Install ImageMixer VCD for FinePix as
directed by the on-screen instructions.
9. Close the Readme window.
10
. Install WINASPI as directed by the on-screen
instructions.
11
. Install Windows Media Player as directed
by the on-screen instructions and then
restart your PC.
If the latest version of the software is already installed
on your PC, this installation is not performed. When
next screen appears, click the [Restart] button.
In Windows Media Component Setup window, tick
the I have read the Privacy Statement checkbox
and then click the [Next >] button.
When you click the [Finish] button, your PC is
restarted.
89
6
88
15
. Proceed with the installation as directed
by the on-screen instructions.
To install Acrobat Reader later...
1. Open the My Computer window, right-click
the CD-ROM icon and select Open to view
the contents of the CD-ROM.
2. Double-click ACROREAD ENGLISH
folder.
3. Double-click ar505enu.exe.
4. Proceed with the installation as directed by
the on-screen instructions.
12
. After you restart your PC, install DirectX as
directed by the on-screen instructions and
then restart your PC again. If the latest
version of DirectX is already installed on
your PC, this installation is not performed.
13
. After you restart your PC, the FinePixViewer
installation completed message appears.
Click Using FinePixViewer to view the
basic FinePixViewer functions.
14
. To install Acrobat Reader, click Install
Acrobat Reader.
You should install Adobe Systems Acrobat
Reader software to read the FinePixViewer Users
Guide (PDF).
If you already have the latest version installed,
this step is not required.
2. Double-click Installer for MacOS8.6-9.x
to launch the Installer.
3. The Installer setup screen appears. Click
the [Installing FinePixViewer] button.
For more information on what is installed, click the
[Read Me First] button and [Using FinePixViewer]
button.
4. A confirmation message appears asking
whether you want to continue with the
installation. Click the [OK] button.
5. The User License Agreement for this
software is displayed. Read the agreement
carefully and then, if you agree to the
terms of the Agreement, click the [Yes]
button. If you click the [No] button, the
software is not installed.
6.3 Installation on a Mac OS 8.6 to 9.2
6.3.1 Check the system software settings
Enable File Exchange
Check whether File Exchange is active.
To use an xD-Picture Card that is supported by the
camera, the File Exchange utility supplied with Mac
OS must be running.
1. Switch on your Macintosh and start up
Mac OS 8.6 to 9.2.
Do not connect the camera to your Macintosh until the
software installation is completed.
2. Select the Extension Manager in the Control
Panel and check that the File Exchange
check box is ticked. If not, click in the box
so that an appears and then restart your
Macintosh.
NOTE
6.3.2 From FinePixViewer installation to restart
1. When you load the enclosed CD-ROM into
the CD-ROM drive, the FinePix window
automatically opens.
If the FinePix window does not open automatically,
double-click the CD-ROM icon.
NOTE
91
6
90
6. Select the installation destination for
FinePixViewer and ImageMixer VCD for
FinePix.
1 Click the [Open] button to open the installation
destination folder.
2 Click the [Save] button.
7. Install QuickTime as directed by the on-
screen instructions and then restart your
Macintosh.
If you have already installed QuickTime version
5.0.2 or later, this installation is not performed.
If the Connection Speed window appears after you restart your
Macintosh, set the correct speed for your environment of
connection and then click the [Next] button.
If you do not know your connection speed, simply click the
[Next] button.
Click [Agree] button in the License window.
8. After you restart your Macintosh, the
FinePixViewer installation completed
message appears. Click Using
FinePixViewer to view the basic
FinePixViewer functions.
9. To install Acrobat Reader, click Install
Acrobat Reader.
You should install Adobe Systems Acrobat
Reader software to read the FinePixViewer Users
Guide (PDF).
If you already have the latest version installed,
this step is not required.
10
. Proceed with the installation as directed
by the on-screen instructions.
To install Acrobat Reader later...
1. Double-click the FinePix CD-ROM to
open the CD-ROM window.
2. Double-click FinePixViewer for Mac OS
8.6-9.x Acrobat Reader English
folder.
3. Double-click English Reader Installer.
4. Proceed with the installation as directed by
the on-screen instructions.
93
6
92
6.4 Installation on a Mac OS X
6.4.1 From FinePixViewer installation to restart
Only FinePixViewer is installed on Mac OS X.
AVI movies cannot be played back on version 10.0.4.
1. Switch your Macintosh on and start up Mac
OS X. Do not launch any other applications.
2. Load the enclosed CD-ROM into the CD-
ROM drive. The FinePix window opens.
If the FinePix window does not open automatically,
double-click the CD-ROM icon.
3. Double-click Installer for MacOS X.
NOTE
NOTE
4. Click the “” icon.
5. Enter the administrator name and password.
Then click the [OK] button.
6. Click the [Continue] button.
7. Quit any other programs that are running
and then click the [Continue] button.
8. Click [Cntinue] button in the Software
License Agreement window.
9. Select the Mac OS X startup disk as the
installation destination and click the
[Continue] button.
10
. Click the [Install (upgrade)] button.
11
. When you have completed the installation,
click the [Restart] button.
95
7
94
DC IN 5V Socket
7.1 Using the optional AC Power adapter
Always use a FUJIFILM AC Power Adapter AC-5V
(P.114).
Use the AC power adapter in situations when a
loss of power will cause problems, such as
during file downloading (via the USB connection).
Using the AC power adapter also allows you to
take pictures and play back images without
worrying about depleting the batteries.
hCompatible AC power adapters
(Sold separately)
AC-5VS/AC-5VHS/AC-5VH
See P.119 for notes on using the AC power adapter.
Only connect or disconnect the AC power adapter
when the camera is switched off.
Connecting or disconnecting the AC power adapter
while the camera is switched on temporarily interrupts
the power supply to the camera, so that images or
movies being shot at the time are not recorded.
Failing to switch the camera off first can also result in
damage to the xD-Picture Card or malfunctions during
PC connection.
Check that the camera is switched off. Plug the
AC power adapter connector into the DC IN 5V
socket and then plug the AC power adapter into
the power outlet.
The socket-outlet shall be installed near the equipment
and shall be easily accessible.
The shape of the plug and socket-outlet depends on
the country of use.
Connecting the AC power adapter does not
allow you to charge the Ni-MH batteries. Use the
optional charger (P.114) to charge the Ni-MH
batteries.
DSC (Mass storage device) Mode
This mode provides a simple way to read images
from an xD-Picture Card and store images on to
an xD-Picture Card (P.96).
The first time you connect the camera
to your computer by referring Section 6
You must install all the
software before
connecting the camera
to your computer.
PC CAM (PC Camera) Mode
This function allows you to conduct
videoconferencing sessions between PCs
connected to the Internet (P.99).
Videoconferencing (PictureHello) is not
supported on Macintosh computers.
Connection is only possible with a FUJIFILM camera
equipped with a PC Camera function.
CD-ROM
(Software for FinePix SX)
For more information on using the software,
refer to How to use FinePixViewer in the HELP
menu which was installed from the CD-ROM.
If the power cuts out during data transmission,
the data will not be transmitted correctly. Always
use the AC power adapter when connecting the
camera to a computer.
The Camera Connection section explains how
to connect the camera to your computer using
the special USB cable and describes the
functions you can use once the camera and
computer are connected.
7 Camera Connection
97
7
96
i When the camera and computer are exchanging
data, the self timer lamp blinks and the indicator
lamp blinks alternately green and orange.
i DSC appears on the screen.
i Power Save is disabled when the camera is
connected to a USB port.
Before replacing the xD-Picture Card, always disconnect
the camera from the PC using the procedure on P.102.
Do not disconnect the USB cable when the camera is
communicating with the PC. See P.102 for information
on the disconnection procedure.
Digital
(USB) socket
Camera
DC IN 5V
socket
PC
(USB)socket
OK
BACK
POWER SAVE
DATE/TIME
USB MODEUSB MODE
OFF
SET
SET−UPSET−UP
POSTVIEWPOSTVIEW
ON
DSC
1. Load an xD-Picture Card containing
photographed images into your camera.
2. Slide the Power switch to the side to turn
the camera on.
3. Set the USB MODE setting in the SET
UP menu to DSC (P.80, 81).
4. Slide the Power switch to the side to turn
the camera off.
You should use the AC power adapter (sold
separately) the camera is connected to your PC
(P.95). Loss of power during data transmission can
prevent successful data downloading.
5. Switch your PC on.
6. Use the special USB cable to connect the
camera to your computer.
7. Switch the camera on.
Always use the prescribed procedure when
disconnecting or switching off the camera
(P.102).
If you are using a Windows PC, the driver settings
are specified automatically when installation is
completed. No further action is required.
On Windows XP and Mac OS X, you must specify the
automatic launch settings the first time you connect
the camera to your computer.
Take care to ensure that the special USB cable is
connected the correct way around and that the plugs
are pushed fully into the connection sockets.
7.2 Use at DSC mode
Camera Operation PC Operation
The Windows CD-ROM may also be required
during installation. In this event, switch CD-ROMs
as directed by the on-screen instructions.
i FinePixViewer automatically starts up.
Windows 98/98 SE/Me/2000 Professional
i A removable disk icon appears and you can
use your PC to transfer files to and from the
camera.
Windows Macintosh
Screen for
Windows 98 SE
If the above operations do not occur, you do not
have the required software programs or drivers
installed on your PC. Complete the required PC
setup procedures. Then reconnect the camera
to your PC.
PC
(USB)socket
99
7
98
OK
BACK
POWER SAVE
DATE/TIME
USB MODEUSB MODE
OFF
SET
SET−UPSET−UP
POSTVIEWPOSTVIEW
ON
PC CAM
1. Slide the Power switch to the side to turn
the camera on.
2. Set the USB MODE setting in the
SETUP menu to PC CAM (P.80, 81).
3. Slide the Power switch to the side to turn
the camera off.
You should use the AC power adapter (sold separately)
when the camera is connected to your PC (P.95).
Loss of power during data transmission can prevent
successful data downloading.
4. Switch your PC on.
5. Use the special USB cable to connect the
camera to your computer.
6. Switch the camera on.
Always use the prescribed procedure when
disconnecting or switching off the camera
(P.102).
Take care to ensure that the special USB cable is
connected the correct way around and that the plugs
are pushed fully into the connection sockets.
If you are using a Windows PC, the driver
settings are automatically specified when
installation ends. Just wait a few moments.
Digital
(USB) socket
Camera
DC IN 5V
socket
7.3 Use at PC-CAM mode
1. The Found New Hardware help message
appears in the bottom-right corner of your
screen. This message will close when the
settings are completed. No action is required.
This step is not required for subsequent connections.
2. Specify the settings in the AutoPlay dialog
box.
When FinePixViewer is included in
the list of actions to perform
Select Viewing images using FinePixViewer
and then select the Always do the selected
action checkbox. (This checkbox may not be
shown in some cases.)
Click the [OK] button to launch FinePixViewer.
Windows XP
When FinePixViewer is not included
in the list of actions to perform
Select Take no action and then select the Always
do the selected action checkbox. (This checkbox
may not be shown in some cases.)
Click the [OK] button and launch FinePixViewer
manually.
3. A new removable disk icon appears in the
My Computer window.
The next time you connect the camera, the removable
disk drive icon and name change to the FinePix icon
and name.
TIP
Proceed to Using FinePixViewer on
page 104.
101
7
100
i When the camera and computer are
exchanging data, the self timer lamp blinks
and the indicator lamp blinks alternately green
and orange.
i The lens is fixed at the wide-angle zoom setting.
i PC CAM appears on the screen.
i Power Save is disabled when the camera is
connected to a USB port.
Do not disconnect the USB cable when the camera is
communicating with the PC. See P.102 for information
on the disconnection procedure.
If the camera is used as a PC camera, a light source
such as fluorescent tube stand can be used to
illuminate the subject and get a brighter image.
When the camera is connected to a computer as a PC
camera, the color tones on the screen may change
briefly.
PC Operation
1. FinePixViewer automatically starts up and
the PictureHello window opens (Windows
only).
Screen for Windows 98 SE
Camera Operation
If the above operations do not occur, you do not
have the required software programs or drivers
installed on your PC. Complete the required PC
setup procedures. Then reconnect the camera
to your PC.
If the Digital Signature Not Found dialog box
appears, click the [Yes] button.
The USB PC Camera Driver is installed automatically.
When the following screen appears, click the
[Continue] button.
3. FinePixViewer starts up automatically and
the live image is displayed.
If the live image does not appear, refer to
Troubleshooting in FinePixViewer Users Guide (PDF).
The Exif Launcher installed with the FinePixViewer
automatically launches FinePixViewer when you
connect the camera to your PC.
TIP
NOTE
Windows XP
Windows 2000 Professional
2. Check PC operation. The installation
procedure differs depending on the
operating system running on your PC.
This step is not required for subsequent
connections.
The New Hardware Found wizard appears. The
wizard will close when the settings are completed.
No action is required.
The Windows CD-ROM may also be required
during installation. In this event, switch CD-ROMs
as directed by the on-screen instructions.
Windows 98/98 SE/Me
103
7
102
1. Switch the camera off.
2. Unplug the special USB cable from the
camera.
Macintosh
When you drag the icon to the Trash,
appears on the cameras screen.
Drag the Removable drive icon on the desktop
to the Trash.
Digital
(USB) socket
Camera
DC IN 5V
socket
3
3. The menu option shown below appears.
Click on this option.
Screen for Windows Me
4. The Eject hardware dialog box appears.
Click the [OK] button or the close button.
1
1. Quit all applications (FinePixViewer etc.)
that are using the camera.
2. Check that the indicator lamp is lit green
or that the self timer lamp is off (no data is
being exchanged with the computer).
Perform the steps shown below before you
switch the camera off. This procedure
differs depending on the operating system
software (or PC) you are using.
No PC operation is needed.
2. Left-click the Eject icon in the taskbar and
eject USB Disk.
Even when Copying is no longer displayed on the
computer, the camera and the computer may still be
exchanging data. Always check that the indicator
lamp is lit green or that the self timer lamp is off.
Windows 98 or 98 SE
Windows Me/2000 Professional/XP
2
For a DSC connection, proceed to step .
For a PC CAM connection, proceed to step .
3
2
1. Right-click the
removable disk icon in
the My Computer
window and select
Eject. This step is only
required in Windows
Me.
Screen for Windows Me
7.4 Disconnecting the Camera
105
8
104
3. Click the [Automatic Taking] button.
Mac OS X
Mac OS 8.6-9.2
8 Using FinePixViewer
8.1 Saving Images on Your Computer
This section gives a brief overview of how to use
FinePixViewer. Refer to these instructions while you
are using FinePixViewer.
1. Connect the camera to your computer in
DSC mode (P.96).
2. When you open the folders shown below
in order, the images in the camera are
displayed in the thumbnail display area.
On Windows XP, the
removable disk appears
as FinePix (for the
second and subsequent
connections).
NOTE
Windows
1
2
3
4
2
3
1
4
2
3
4
1
Copies multiple images
at once.
5. Double-click a still-image thumbnail to
open an image window.
Always use the prescribed procedure when
disconnecting or switching off the camera
(P.102).
For more information on using the software,
refer to How to use FinePixViewer in the HELP
menu which was installed from the CD-ROM.
8.2 Making a FinePix CD Album
For using ImageMixer VCD for FinePix to create
CD albums and video CDs.
h To create CD-Rs or video CDs, you will need a
CD-R drive.
h Refer to the ImageMixer VCD for FinePix help
file for more detailed information.
h For inquiries regarding ImageMixer VCD for
FinePix
PIXELA User Support Center
PIXELA Home Page: http://www.ImageMixer.com/
North America (Los Angels) Telephone: +1-213-341-0163
Europe (U.K.) Telephone: +44-1489-564-764
Asia (Philippines) Telephone: +63-2-438-0090
Japan (Osaka) Telephone: +81-72-224-0181
4. Check that the files are downloaded from
the camera to your computer and that a
folder with the photography date is
created. Open the folder as shown below.
To open a folder, click on the plus “” symbol (Windows)
or arrow “” (Macintosh) to the left of the folder.
OR
Indicates the folder in which FinePixViewer is
installed.
Mac OS
Windows
+
TIP
1
2
3
1
2
1
2
3
107
8
106
To use the FinePix Internet services, users must
first register.
Follow the steps below to register. Users can be
registered for free.
1. Launch FinePixViewer.
2. Click the [Register Now] button.
3. The Users Registration for Internet
Services dialog box opens. As shown at
right, select [Register Here], then select
the country or region where you are living
and click the [OK] button.
If you are not already connected to the Internet,
connect now (A dial-up dialog box may be
displayed).
If you have completed the user registration, select
Already Registered (E.g. When you want to re-
install FinePixViewer after completing user
registration).
4. When the browser starts up, proceed as
directed by the on-screen instructions.
If the country or area where you are living does
not appear in the pull-down list, select OTHERS.
8.4 User Registration
8.3 Using the FinePix Internet Service
Mac OS X users should refer to P.108.
Using FinePixViewer also allows you to access the
FinePix Internet Service via the Internet.
A working Internet connection is required not only for
FinePix Internet Service, but also online FAQ
(FinePixViewer frequently asked and responses) and
latest updates.
A FinePix Internet Service fees do not include your
Internet service provider (ISP) connection fees or any
phone charges incurred in dialing your ISPs access
point.
The figure below gives a general overview of the
procedure.
NOTE
First-time users
To the user registration
window
Registered users
The Internet menu is
updated.
For Windows and Mac OS 8.6 to 9.2
Your user ID and password are very important. Make
sure you do not forget them.
NOTE
109
8
108
3. Select Users registration and click the
[OK] button.
If you are not already connected to the Internet,
connect now. (A dial-up dialog box may be
displayed.)
Only select menu acquisition if you have already
completed the user registration process and you
have re-installed FinePixViewer, etc.
4. The Users Registration
dialog box opens.
Select the country or
area where you are
living and click the
[OK] button.
The actual user registration page may differ slightly
in appearance from the sample shown here.
If the country or area where you are living does
not appear in the pull-down list, select OTHERS.
5. When the browser starts up, proceed as
directed by the on-screen instructions.
6. Enter the required information in the user
registration page.
1 Enter the name of your choice (nickname, etc.).
2 Enter a password of your choice using letters
and/or numbers. Then enter the password again
for confirmation.
3 Enter your name.
4 Enter your E-mail address.
5 Enter the remaining required information.
After you register, a confirmation E-mail message
is sent to you. Be sure to enter a valid E-mail
address at which you can receive the message.
The actual user registration page may differ slightly
in appearance from the sample shown here.
7. When you have entered all the required
information, click the [Register] button at
the bottom of the page.
Once you complete the registration, a confirmation
E-mail is sent. Wait a few moments until the
message is sent.
1
2
3
4
5. Enter the required information in the user
registration page.
1 Enter the name of your choice (nickname, etc.).
2 Enter a password of your choice using letters
and/or numbers. Then enter the password again
for confirmation.
3 Enter your name.
4 Enter your E-mail address.
5 Enter the remaining required information.
After you register, a confirmation E-mail message
is sent to you. Be sure to enter a valid E-mail
address at which you can receive the message.
The actual user registration page may differ
slightly in appearance from the sample shown
here.
6. When you have entered all the required
information, click the [Registration] button
at the bottom of the page.
Once you complete the registration, a confirmation
E-mail is sent. Wait a few moments until the
message is sent.
For Mac OS X
To use the FinePix Internet services, users must
first register.
Follow the steps below to register. Users can be
registered for free.
1. Double-click the FinePixViewer icon in
the installed folder.
2. Click the [Users Registration] button. The
Operation Selection dialog box appears.
1
2
3
4
<Users Registration button>
111
8
110
8.5 Mastering FinePixViewer
For more information on FinePixViewer functions
not fully explained in this manual, refer to How to
Use FinePixViewer in the Help menu for details.
To read How to Use FinePixViewer...
You must install Adobe Systems Acrobat Reader.
See P.91 for information on installing Acrobat Reader.
What is explained in How to Use
FinePixViewer...
How to Use FinePixViewer covers a range of topics,
including batch processing and ordering prints.
Example: Looking up slide shows
1. Click How to Use FinePixViewer in the
FinePixViewer Help menu.
2. Search for relevant articles by clicking the
corresponding items in the Help
Bookmarks or Contents. Here, click
Viewing Slide Shows.
Contents
Bookmarks
3. The Viewing Slide Shows information is
displayed. Press the key to view the
previous page or the key to view the
next page.
For more information on using Acrobat Reader,
refer to the Acrobat Reader Help menu.
8.6 Uninstalling the Software
Only perform this operation when you no longer
require the installed software or when the software
was not installed correctly.
1. Switch on your PC.
2. Disconnect the camera (P.102, 103).
3. Quit all currently running applications.
4. Close all files.
5. Open the My Computer window, open
the Control Panel, and double-click
Add/Remove Programs.
6. The Add/Remove Programs Properties
window appears. Select the software to be
uninstalled (FinePixViewer or the driver)
and then click the [Add/Remove] button.
Windows
<To remove the driver software>
<To remove FinePixViewer>
7. When the confirmation message appears,
click the [OK] button. Check your selection
carefully since the process cannot be
cancelled once you click [OK].
8. Automatic uninstallation begins.
When uninstallation ends, click the [OK]
button.
113112
System Expansion Options
FinePix S304
Digital Camera
(
USB
)
(
PC card slot
)
Personal Computer
(commercially available)
Digital Photo Printer CX-400
(
USB
)
(
USB
)
PC Card Adapter
xD-Picture Card
Image Memory Card Reader
TV monitor
(
commercially available)
e By using the FinePix S304 together with other optional FUJIFILM products, your system can be
expanded to fill a wide range of uses.
Only perform this operation when you no longer require
the installed software or when the software was not
installed correctly.
Uninstalling Mass Storage Driver and
PC Camera Driver
1. Check that the camera is not connected to
your Macintosh.
2. Drag all the files that begin with
USB04CB... to the Trash.
3. Restart your Macintosh.
4. Select Empty Trash in the Special menu.
Uninstalling Exif Launcher,
FinePixViewer and DP Editor
1. After you have quit Exif Launcher in Exif
Launcher Settings in the FinePixViewer
Settings menu, move the Exif Launcher
file from the Startup Items folder in the
System folder to the Trash. Then select
Empty Trash in the Special menu.
2. After you have exited FinePixViewer and
DP Editor and then drag the installed
Mac OS 8.6-9.2
NOTE
Macintosh
FinePixViewer folder to the Trash. Then
click Empty Trash in the Special menu.
Uninstalling FinePixViewer
Quit FinePixViewer and DP Editor. Then drag
the installed FinePixViewer folder to the Trash
and select Empty Trash in the Special
menu.
Mac OS X
115114
SC-FX304
This is a special case made of polyester that protects the camera against soiling,
dust and minor impacts when it is being carried.
h DPC-AD PC Card Adapter
The PC Card Adapter allows the xD-Picture Card and SmartMedia to be used as
a PC Card Standard ATA-compliant (PCMCIA 2.1) PC card (Type II ).
h Compatible with SmartMedia of 5V/3.3V, 2MB to 128MB.
Accessories Guide
h xD-Picture Card
These are separately available xD-Picture Card cards.
Use the following xD-Picture Card:
DPC-16 (16MB)/DPC-32 (32MB)/DPC-64 (64MB)/DPC-128 (128MB)
AC Power Adapter AC-5VH/AC-5VHS
Use the AC-5VH/AC-5VHS when taking pictures for a long period of time or when
the FinePix S304 is connected to your PC.
The shape of the AC power adapter, the plug and socket outlet depend on the country.
Fujifilm Rechargeable Battery 2HR-3UF (2×)
The 2HR-3UF includes 2 pieces of high-capacity AA-size Nickel-Metal Hydride (Ni-MH)
batteries.
Fujifilm Battery charger with Battery BK-NH (with Euro type or UK type plug)
The BK-NH includes the quick battery charger BCH-NH and 2 Ni-MH batteries.
The BCH-NH can charge 2 Ni-MH batteries in approximately 120 minutes.
Up to 4 Ni-MH batteries can be charged simultaneously.
e The optional accessories (sold separately) can make taking pictures with the FinePix S304 even
easier. For information on how to attach and use the accessories, refer to the instructions provided
with the accessory used.
Visit the FUJIFILM web site for the latest information on camera accessories.
http://home.fujifilm.com/products/digital/index.html
h DPC-R1 Image Memory Card Reader
The DPC-R1 provides a quick and easy way to transfer images back and forth
between your PC and an image memory card (xD-Picture Card and SmartMedia).
The DPC-R1 uses the USB interface for high-speed file transfer.
i Compatible with Windows 98/98 SE, Windows Me, Windows 2000 Professional,
Windows XP or iMac, Mac OS 8.6 to 9.2, Mac OS X (10.1.2 to 10.1.5) and
models that support USB as standard.
i Compatible with SmartMedia of 3.3V, 4MB to 128MB.
117116
h AA-size alkaline, Ni-MH (nickel-metal hydride) can be
used with this camera.
Do not use AA-size manganese, lithium batteries in your
FinePix S304 because the heat generated by the
batteries could damage the camera or cause
malfunctions.
h The operating lives of alkaline batteries vary between
brands and the life of batteries you purchase may be
shorter than the alkaline batteries provided with the
camera.
h Do not use the batteries that are leaking, deformed,
discolored or exhibit any other obvious abnormality.
h Do not store the batteries in very warm or moist locations.
h Keep the batteries out of reach of infant and young
children.
h
When loading the batteries into the camera, ensure that the
battery polarity (
>
and
<
) is as indicated on the camera.
h Do not use new batteries together with used batteries. In
the case of rechargeable batteries, do not use charged
and discharged batteries together. Do not use batteries
of different types or brands together.
h If you do not intend to use the camera for a long period of
time, remove the batteries from the camera. (Note that if
the camera is left with the batteries removed, the time
and date settings are cleared.)
h The batteries may feel warm immediately after being
used. Before removing the batteries, switch the camera
off and wait until the batteries cool down.
h
When replacing the batteries, always fit 4 new batteries.
Here, new batteries refers to either recently purchased
unused alkaline batteries, or Ni-MH (nickel-metal hydride)
batteries that have recently been fully recharged together.
h
In cold locations (at temperatures of +10°C/+50°F or below),
battery performance deteriorates and the time for which they
can be used shortens markedly. This is particularly true of
alkaline batteries. In cold conditions, put the batteries in your
pocket or a similar place to warm them before loading them
into the camera. If you use a body warmer to warm the
batteries, ensure that they are not in direct contact with the
warmer.
Applicable Batteries
Notes on the Power Supply
Incorrect use of the batteries could cause them to leak,
become hot, ignite or burst. Always observe the
precautions given below.
h Do not heat the batteries or throw them into a fire.
h Do not carry or store the batteries with metal objects
such as necklaces or hairpins that could come into
contact with the metal positive > and negative < poles
of the battery.
h Do not expose the batteries to fresh or sea water, and
take particular care to keep the terminals dry.
h Do not attempt to deform, disassemble or modify the
batteries.
h Do not attempt to peel off or cut the battery casing.
h Do not drop, strike or otherwise subject the batteries to
strong impacts.
Notes on the Batteries
Notes on Using Your Camera Correctly
Places to Avoid
Do not store or use the camera in the following types of
locations:
h In the rain or in very humid, dirty or dusty places.
h In direct sunlight or in places subject to extreme
temperature rises, such as in a closed car in summer.
h Extremely cold places.
h Places subject to strong vibration.
h Places affected by smoke or steam.
h Places subject to strong magnetic fields (such as near
motors, transformers or magnets).
h In contact with chemicals such as pesticides or next to
rubber or vinyl products for long periods of time.
Notes on Immersion in Water or Sand
The FinePix S304 is particularly adversely affected by
water and sand. When you are at the beach or close to
water, ensure that the camera is not exposed to water or
sand. Take care also not to place the camera on a wet
surface. Water or sand inside the camera can cause faults
that may be irreparable.
Notes on Condensation
If the camera is carried suddenly from a cold location into a
warm place, water droplets (condensation) may form on
the inside of the camera or on the lens. When this occurs,
switch the camera off and wait an hour before using the
camera. Condensation may also form on the xD-Picture
Card. In this event, remove the xD-Picture Card and wait a
short time before using it again.
When the Camera is Unused for Long Periods
If you do not intend to use the camera for a long period of
time, remove the batteries and the xD-Picture Card before
storing the camera.
Cleaning Your Camera
h Use a blower brush to remove dust from the lens, LCD
monitor screen or viewfinder as these surfaces, and then
wipe lightly with a soft, dry cloth. If any soiling remains,
apply a small amount of lens cleaning liquid to a piece of
FUJIFILM lens cleaning paper and wipe gently.
h Do not scratch hard objects against the lens, LCD
monitor screen or viewfinder as these surfaces are easily
damaged.
h Clean the body of the camera with a soft, dry cloth. Do
not use volatile substances such as thinners, benzine or
insecticide, as these may react with camera body and
cause deformation or remove the coating.
Using the Camera Overseas
When travelling overseas, do not place your camera in the
check-in baggage. Baggage handling at airports may
subject baggage to violent shocks, and the camera may be
damaged internally even when no external damage is
visible.
e
Be sure to read this information in conjunction with Safety Notes (P.131), to ensure that you use
your camera correctly.
119118
Memory effect: A phenomenon affecting the battery
characteristics such that the apparent
battery capacity decreases.
h
Soil (such as fingerprints) on the battery terminals can
markedly reduce the number of available shots. Carefully
wipe the battery terminals clean with a soft dry cloth before
loading the batteries.
If any liquid at all leaks from the batteries, wipe the battery
compartment thoroughly and then load new batteries.
I
f any battery fluid comes into contact with your hands or
clothing, flush the area thoroughly with water. Note that
battery fluid can cause loss of eyesight if it gets into your
eyes. If this occurs, do not rub your eyes. Flush the fluid out
with clean water and contact your physician for treatment.
Disposing of Batteries
When disposing of batteries, do so in accordance with your
local waste disposal regulations.
Notes on Small Rechargeable Batteries (Ni-MH
batteries)
h Always use the special battery charger to charge AA-size
Ni-MH batteries. Charge the batteries as described in the
instructions provided with the battery charger.
h Do not use the battery charger to charge batteries other
than those specified for use with the charger.
h Note that the batteries may feel warm immediately after
being charged.
h Ni-MH batteries are not charged at shipment. Be sure to
charge the batteries before using them.
h The camera mechanism is such that it draws a minute
amount of current even when the camera is switched off.
Take particular care not to leave Ni-MH batteries in the
camera for a long period of time as they can become
excessively discharged and may no longer be usable
even when charged.
h Ni-MH batteries self-discharge even when not used.
Always charge Ni-MH batteries before using them. If the
time for which a battery provides power shortens
markedly when it has been correctly charged, this
indicates that the battery has reached the end of its
effective life and should be replaced.
h Soiling (fingerprints, etc.) on the terminals of Ni-MH
batteries can greatly reduce the number of available
shots. When this occurs, clean the terminals carefully
with a soft dry cloth. Then use up the remaining charge in
the batteries and recharge them.
h Newly purchased batteries or batteries that have been
left unused for an extended period may not be fully
charged. (This is indicated by the immediate display of
the battery low warning or a low number of available
shots.) This is a normal characteristic of the batteries and
does not indicate a fault. Repeatedly charging and using
the batteries 3 or 4 times will restore them to a normal
condition.
h If you repeatedly charge a Ni-MH battery before it is fully
discharged, it will suffer from the memory effect*,
causing the battery low warning to appear while there is
still ample charge remaining in the battery. To restore the
batteries to their normal condition, use up all the charge
in the batteries before recharging them.
Notes on the Power Supply
Always use the AC-5VH/AC-5VHS AC Power Adapter with
the FinePix S304 Camera.
The use of an AC power adapter other than the AC-5VH/
AC-5VHS could result in damage to your FinePix S304
Digital Camera.
h This AC power adapter is designed exclusively for indoor
use.
h Plug the connection cord plug securely into the DC input
terminal of the FUJIFILM Digital camera.
h Turn off the power switch of the FUJIFILM Digital camera
before disconnecting the connection cord from the
FUJIFILM Digital cameras DC input terminal. To
disconnect, take hold of the plug and pull it out (do not
disconnect it by pulling on the cord).
h Do not use this AC power adapter with any device except
the specified device.
h During use, this AC power adapter will become hot to
touch, but this is normal.
h Do not disassemble the AC power adapter. Doing so
could be dangerous.
h Do not use this device in a place with high temperature
and high humidity.
h Do not drop or subject this device to strong shocks.
Notes on Using the AC Power Adapter
h This device may emit a humming noise, but this is
normal.
h If used near a radio, this device may cause static, so play
the radio in a distant place.
121120
Notes on the xD-Picture Card
when images are being played back. These actions
could result in damage to the xD-Picture Card.
h The use of xD-Picture Cards is recommended with
the FinePix S304.
The camera quality cannot be guaranteed when
cards other than those manufactured by FUJIFILM
are used.
h The xD-Picture Card may feel warm when it is
removed from the camera after extended periods of
picture taking or image viewing. This is normal and
does not indicate a fault.
h Do not affix labels to the xD-Picture Card.
This could result in the label peeling off and causing
a fault when the card is inserted or removed.
Notes on Using xD-Picture Card with a PC
h If you intend to take photos using an xD-Picture Card
that has been used on a PC, format the xD-Picture
Card on your camera.
h When you format an xD-Picture Card in the camera
and then shoot and record images, a directory
(folder) is automatically created. Image data is then
recorded in this directory.
h Do not change or delete the directory (folder) names
or file names on the xD-Picture Card from your PC as
this will make it impossible to use the xD-Picture
Card in your camera.
h Always use the camera to erase image data on an
xD-Picture Card.
h To edit image data, copy the image data to the PCs
hard disk and then edit the copied data.
h Do not copy files other than those that will be used by
the camera.
Specifications
Type
Image memory card for digital cameras
(xD-Picture Card)
Memory type NAND-type flash memory
Conditions for use Temperature:
0°C to +40°C (+32°F to +104°F)
Humidity:
80% max. (no condensation)
Dimensions 25 mm × 2.2 mm × 20 mm
(0.98 in. × 0.09 in. × 0.79 in.) (W × H × D)
Image Memory Card
h This Image Memory Card is a new image recording
media (xD-Picture Card) developed for digital
cameras. The Image Memory Card consists of a
semiconductor memory (NAND-type flash memory)
to record digital image data.
The recording process is electrically performed and
enables erasure of existing image data as well as re-
recording of new image data.
h When using a new Memory Card, or a Memory Card
that has been initialized by a PC, be sure to initialize
(format/initialize) the card with your digital camera
before using it.
Protecting Your Data
h Data may be lost or destroyed in the following
situations. Please note that FUJIFILM assumes no
responsibility for data that is lost or destroyed.
1. Removal of the memory card or turning the power
off while the memory card is being accessed (i.e.,
during record, erase, initialization, and playback
operations).
2. Improper handling and use of the memory card by
the user or third party.
h We recommend saving your important data to
another media (i.e., MO disk, CD-R, hard disk, etc.).
Notes on Handling xD-Picture Card
h Keep xD-Picture Cards out of the reach of small
children. When storing xD-Picture Cards, ensure that
they are kept in a location out of the reach of small
children to prevent a card being accidentally
swallowed. An xD-Picture Card could cause suffocation
if accidentally swallowed. If a child swallows an xD-
Picture Card, seek medical advice immediately.
h Make sure that the memory card is straight when you
insert into the camera etc.
h The memory card is a precision electronic instrument.
Do not apply pressure or shock, and avoid bending.
h Do not use the memory card in a hot, humid, or
corrosive environment.
h If the contact area on the card is soiled (dust,
fingerprints, etc.), wipe it clean with a soft, dry cloth.
h Clean the memory card with a soft dry piece of cloth
when dirty.
h When you carry or store it, always keep the card in
the anti-static case provided. Use a storage case if
available.
h The memory card can be used reliably for a long
period of time, but will eventually lose its ability to
store and play back image data. At this point, replace
with a new memory card.
h Never remove the xD-Picture Card or switch the
camera off during data recording, during data erasing
(xD-Picture Card formatting) or during frame advance
123122
i The data could not be recorded due to an xD-
Picture Card error or a connection error
between the xD-Picture Card and camera.
i The photographed image cannot be recorded
as it is too large to fit in the available space on
the xD-Picture Card.
i Re-insert the xD-Picture Card or switch the
camera off and then on again.
i Use a new xD-Picture Card.
i The voice memo file is faulty.
i Camera fault.
i The voice memo cannot be played back.
i Contact your FUJIFILM dealer.
Warning Displayed Explanation Remedy
The frame number has reached 9999999. Take the shot using a formatted xD-Picture Card.
i
The file played back was not recorded correctly.
i The xD-Picture Card contact area (gold-
colored area) is soiled.
i Camera fault.
i You attempted to play a movie that was not
recorded on this camera.
i Images cannot be played back.
i Wipe the contact area on the xD-Picture Card
with a soft dry cloth. It may be necessary to
format the xD-Picture Card. If the error
message is still displayed, replace the xD-
Picture Card.
i Contact your FUJIFILM dealer.
i Movies cannot be played back.
A protected file was encountered. Protected files cannot be erased. Remove the
protection.
Warning Displays e The table below lists the warnings that are displayed on the screen
(赤
(赤
Warning Displayed Explanation Remedy
(Lit red)
(Blinking red)
The batteries in the camera are fully depleted or
very low on charge.
No xD-Picture Card is loaded.
i
The xD-Picture Card is not formatted.
i
The xD-Picture Card contact area is soiled.
i
Camera fault.
i
The xD-Picture Card contact area is soiled.
i
The xD-Picture Card is damaged.
i
The xD-Picture Card format is incorrect.
i
Camera fault.
The xD-Picture Card is fully recorded.
Replace the batteries or have new batteries
ready.
Insert an xD-Picture Card in the correct direction.
i
Format the xD-Picture Card.
i
Wipe the contact area on the xD-Picture Card
with a soft dry cloth. It may be necessary to
format the xD-Picture Card. If the error message
is still displayed, replace the xD-Picture Card.
i
Contact your FUJIFILM dealer.
i
Wipe the contact area on the xD-Picture Card
with a soft dry cloth. It may be necessary to
format the xD-Picture Card. If the error message
is still displayed, replace the xD-Picture Card.
i
Contact your FUJIFILM dealer.
Erase some images or use an xD-Picture Card
that has ample free space.
There is a strong likelihood of camera shake
because the shutter speed is slow.
Use flash photography. However, a tripod
should be used for some scenes and modes.
The AF (auto focus) cannot work effectively.
i If the image is too dark, take the picture at a
distance of around 2 m (6.6 ft.) from the subject.
i Use AF lock to take the picture.
Outside the AE continuous range. The shot can be taken, but the exposure will not
be correct.
\
125124
Troubleshooting e If you think the camera is faulty, check the following once more.
Troubleshooting Possible causes Solutions
No power.
i The batteries are exhausted.
i The AC power adapter plug has come out of
the power outlet.
i The batteries are loaded the wrong way round.
i Load new fully charged batteries.
i Plug the adapter back in.
i Load the batteries in the correct direction.
Power cuts out during
operation.
The batteries are exhausted. Load new fully charged batteries.
Batteries runs out quickly.
i Camera is being used in extremely cold
conditions.
i The terminals are soiled.
i The batteries have reached the end of their
operating lives.
i Put the batteries in your pocket or another
warm place to heat them and then load them
into the camera just before you take a picture.
i Wipe the battery terminals with a clean, dry
cloth.
i Load new fully charged batteries.
No photograph is taken
when the shutter button is
pressed.
i No xD-Picture Card is loaded.
i The xD-Picture Card is fully recorded.
i The xD-Picture Card is write-protected.
i The xD-Picture Card is not formatted.
i The xD-Picture Card contact area
(gold-
colored area)
is soiled.
i The xD-Picture Card is damaged.
i The Power Save function has switched the
camera off.
i The batteries are exhausted.
i Load an xD-Picture Card.
i Insert a new xD-Picture Card or erase some
unwanted frames.
i Remove the write-protection.
i Format the xD-Picture Card.
i Wipe the xD-Picture Card contact area
(gold-colored area)
with a clean dry cloth.
i Load a new xD-Picture Card.
i Switch the camera on.
i Load new fully charged batteries.
Prints were specified for more than 1000 frames
in the DPOF frame settings.
The maximum number of frames for which
prints can be specified on the same xD-Picture
Card is 999.
Copy the images for which you want to order
prints onto another xD-Picture Card and then
specify the DPOF settings.
Camera malfunction or fault.
i Switch the camera on again, taking care not to
touch the lens.
i Switch the camera off and on again.
Warning Displayed Explanation Remedy
Warning Displays
127126
Troubleshooting Possible causes Solutions
The camera does not emit
any sound.
i The camera volume is set too low.
i The microphone was blocked during
shooting/recording.
i There is something covering the speaker
during playback.
i Adjust the volume.
i Take care not to block the microphone
during shooting/recording.
i Ensure that the speaker is uncovered.
The Frame function does
not erase the frame.
i DPOF settings are specified for some
frames.
i Some frames may be protected.
i Cancel the DPOF settings and try again
(P.70).
i Remove the protection.
The ERASE ALL function
does not erase all the frames.
Cant format the xD-Picture
Card.
The xD-Picture Card is write-protected. Remove the write-protection.
(Peel off the write-protect sticker.)
When the camera is connected
to a personal computer (PC),
the shot image appears on the
cameras LCD monitor.
i The special FinePix S304 USB cable is not
properly connected to the computer or
camera.
i The PC is not switched on.
i Set up the camera and the special FinePix
S304 USB cable correctly.
i Switch the PC on.
The camera no longer
works correctly.
The camera has suffered an unforeseen
problem.
Briefly remove the batteries or disconnect the
AC power adapter. Then reload the batteries
or reconnect the AC power adapter and try
again.
Nothing happens when I
use the Mode switch.
i Camera malfunction.
i The batteries exhausted.
i Briefly remove the batteries or disconnect
the AC power adapter. Then reload the
batteries or reconnect the AC power adapter
and try again.
i Replace the batteries.
Troubleshooting
e If you think the camera is faulty, check the following once more.
Troubleshooting Possible causes Solutions
Can only select Suppressed
Flash flash mode.
Continuous shooting is selected. Set continuous shooting to OFF.
Cant use the flash to take
pictures.
i The shutter button was pressed while the
flash was charging.
i The batteries are exhausted.
i The Suppressed Flash mode is selected.
i Wait until charging is completed before
pressing the shutter button.
i Load new fully charged batteries.
i Set the flash mode to Auto, Red-eye
Reduction or Forced Flash (The flash cannot
be used in some modes).
The photographed image
is dark even though I used
the flash.
i The subject is too far away.
i Your finger was covering the flash/flash
control sensor.
i Move to within the effective flash range
before taking the shot.
i Hold the camera correctly.
The image is blurred.
i The lens is dirty.
i You photographed scenery with Macro mode
selected.
i You took a close-up shot without selecting
Macro mode.
i You are shooting a subject that is not suited
to autofocusing.
i Clean the lens.
i Cancel Macro mode.
i Select Macro mode.
i Use AF/AE lock to take the shot.
The playback image is
faded when I used the
flash to take a picture.
i There is dust on the flash control sensor. i Use an applicator such as a cotton swab to
clean the flash control sensor.
There is speckling on the
image.
The shot was taken with a slow shutter speed (long
exposure) in a high-temperature environment.
This is a characteristic of CCDs and does not
indicate a camera fault.
129128
h Power supply
Use one of the following:
4 × AA-size alkaline batteries
4 × AA-size Ni-MH (nickel-metal hydride) batteries (sold
separately)
AC Power Adapter AC-5VH/AC-5VHS (sold separately)
h Number of available shots using batteries Using
(battery life)
With fully charged battery
This indicates the number of available frames shot
consecutively at room temperature with a flash use rate of
50%. Note that these figures may vary depending on the
ambient temperature and the amount of charge in the
battery. The number of available shots or available
shooting time will be lower in cold conditions.
Input/Output Terminals
Power Supply and Others
h (USB) socket
USB (1) for image data output with a personal computer
h DC IN 5V (Power input) socket
Socket for specified AC power adapter
These specifications are subject to change without notice.
FUJIFILM shall not be held liable for damages resulting
from errors in this Owners Manual.
The LCD monitor on your digital camera is manufactured
using advanced high-precision technology. Even so,
small bright points and anomalous colors (particularly
around text) may appear on the monitor and viewfinder.
These are normal display characteristics and do not
indicate a fault with the monitor. This phenomenon will
not appear on the recorded image.
The operation error may be caused in a digital camera
by the strong radio interference (i. e. electric fields,
static electricity, line noise, etc.).
Due to the nature of the lens, the edges of photographed
images may appear distorted. This is normal and does
not indicate a fault.
Using EVF
Using LCD monitor
Battery type
Alkaline batteries
Ni-MH batteries
HR-3UF
Approx. 300 frames
Approx. 320 frames
Approx. 320 frames
Approx. 350 frames
h Conditions for use
Temperature: 0°C to +40°C (+32°F to +104°F); 80%
humidity or less (no condensation)
h Camera dimensions (W/H/D)
99.7 mm × 77.3 mm × 69.3 mm/3.9 in. × 3.0 in. × 2.7 in.
(not including accessories and attachments)
h Camera mass (weight): Approx. 295 g/10.4 oz.
(not including accessories, batteries or xD-Picture Card)
h Weight for photography: Approx. 437 g/15.4 oz.
(including batteries, xD-Picture Card, lens cap and strap)
h Accessories: See P.7
h Optional Accessories: See P.114, 115
$
Approx.
5
min.
Approx.
10.1
min.
Approx.
20.2
min.
Approx.
40.6
min.
DPC-16 (16MB
)
DPC-32 (32MB
)
12
25
DPC-64 (64MB
)
50
Quality
Number of recorded pixels
Image Data Size
3M · F
#
Approx.
1300KB
2048 × 1536
26
53
107
Approx.
590KB
DPC-128 (128MB
)
102 215
49
99
198
1280 × 960
398
122
247
497
Approx.
130KB
640 × 480
997
Approx.
94
sec.
Approx.
191
sec.
Approx.
6.4
min.
Movie
320 × 240 160 × 120
Approx.
12.9
min.
39
79
159
Approx.
390KB
Approx.
320KB
1600 × 1200
319
Specifications
System
h Model: Digital Camera FinePix S304
h Number of effective pixels: 3.2 million pixels
h CCD sensor
1/2.7-inch square pixel CCD with RGB Filter
Number of total pixels: 3.34 million pixels
h Number of recorded pixels
2048 × 1536 pixels/1600 × 1200 pixels/1280 × 960 pixels/
640 × 480 pixels
h File format
Still image: JPEG (Exif Ver.2.2), DPOF-compatible
Movie: AVI format, Motion JPEG
Design rule for Camera File system compliant
h Viewfinder: 0.33 inches 110,000 pixels electronic viewfinder
h Lens: Fujinon 6× optical zoom lens F2.8/F4.8/F8.2
h Storage media: xD-Picture Card (16MB to 128MB)
h Focus distance: f=6 mm-36 mm
(equivalent to 38 mm-228 mm on a 35 mm camera)
h Exposure control
64 zones TTL metering, Program AE
(exposure compensation available in Manual mode)
h Sensitivity: Equivalent to ISO 100
h White balance
Auto (7 positions selectable in Manual mode)
h Focal range
Normal: Approx. 80 cm/2.6 ft. to infinity
Macro: Approx. 10 cm-80 cm/3.9 in.-2.6 ft.
h Shutter speeds
Variable-speed, 3 sec. to 1/1500 sec. (using AE)
h Flash (Auto flash using flash control sensor)
Effective range: Wide Approx. 0.3 m-3.5 m (1.0 ft.-11.5 ft.)
Tele Approx. 0.8 m-3.5 m (2.6 ft.-11.5 ft.)
Flash modes: Auto, Red-Eye Reduction, Forced Flash,
Suppressed Flash, Slow Synchro, Red-Eye
Reduction + Slow Synchro
(when the pop-up flash is stowed: Suppressed Flash)
h LCD monitor
1.8-inches, 62,000 pixels amorphous silicon TFT
h Aperture: F2.8/F4.8/F8.2 (Wide) (automatically selected)
h Self-Timer: Approx 10 sec. timer clock
h Erase modoes
Erase frame, Erase all frames, Format (initialize)
h Number of frames recorded
3M · N 2M 1M 0.3M
131130
When a fault arises, switch the camera off
and then remove the batteries and
disconnect the AC power adapter.
Continued use of the camera when it is
emitting smoke, is emitting any unusual odor,
or is in any other abnormal state can cause a
fire or electric shock.
h Contact your FUJIFILM dealer.
Do not allow water or foreign objects to
enter the camera.
If water or foreign objects get inside the
camera, switch the camera off, remove the
battery and disconnect and unplug the AC
power adapter.
Continued use of the camera can cause a fire
or electric shock.
h Contact your FUJIFILM dealer.
Do not place the camera on an unstable
surface.
This can cause the camera to fall or tip over
and cause injury.
Do not use the camera in the bathroom or
shower.
This can cause a fire or electric shock.
h To ensure that you use your FinePix S304 camera
correctly, read these Safety Notes and your Owners
Manual carefully beforehand.
h After reading these Safety Notes, store them in a safe
place.
About the Icons
The icons shown below are used in this document to
indicate the severity of the injury or damage that can result
if the information indicated by the icon is ignored and the
product is used incorrectly as a result.
WARNING
This icon indicates that death or
serious injury can result if the
information is ignored.
CAUTION
This icon indicates that personal
injury or material damage can
result if the information is ignored.
The icons shown below are used to indicate the nature of
the information which is to be observed.
Triangular icons notify the user of information
requiring attention (Important).
Circular icons with a diagonal bar notify the user
that the action indicated is prohibited
(Prohibited).
Filled circles with an exclamation mark notify the
user of an action that must be performed
(Required).
Safety Notes
WARNING
Unplug from
power socket.
Do not use in the
bathroom or shower.
Explanation of Terms
DPOF: Digital Print Order Format
DPOF is a format used for recording information on a storage media (image memory card, etc.) that allows
you to specify which of the frames shot using a digital camera are printed and how many prints are made of
each image.
EV:
A number that denotes exposure. The EV is determined by the brightness of the subject and sensitivity (speed) of
the film or CCD. The number is larger for bright subjects and smaller for dark subjects. As the brightness of the
subject changes, a digital camera maintains the amount of light hitting the CCD at a constant level by adjusting
the aperture and shutter speed. When the amount of light striking the CCD doubles, the EV increases by 1.
Likewise, when the light is halved, the EV decreases by 1.
JPEG:
Joint Photographics Experts Group
A file format used for compressing and saving color images. The compression ratio can be selected, but the higher the
compression ratio, the poorer the quality of the expanded image.
Motion JPEG:
A type of AVI (Audio Video Interleave) file format that handles images and sound as a single file. Images in
the file are recorded in JPEG format. Motion JPEG can be played back by QuickTime 3.0 or later.
PC Card:
A generic term for cards that meet the PC Card Standard.
PC Card Standard:
A standard for PC cards determined by the PCMCIA.
PCMCIA:
Personal Computer Memory Card International Association (US).
White Balance:
Whatever the kind of the light, the human eye adapts to it so that a white object still looks white. On the other
hand, devices such as digital cameras see a white subject as white by first adjusting the color balance to suit
the color of the ambient light around the subject. This adjustment is called matching the white balance. A
function that automatically matches the white balance is called an Automatic White Balance function.
133132
Remove the batteries and disconnect the
AC power adapter when you are cleaning
the camera or if you intend to leave the
camera unused for a long period.
Failure to do so can cause a fire or electric
shock.
Using a flash too close to a persons eyes
may temporarily affect the eyesight.
Take particular care when photographing
infants and young children.
Request regular internal testing and
cleaning for your camera.
Build-up of dust in your camera can cause a
fire or electric shock.
h
Contact your FUJIFILM dealer to request
internal cleaning every 2 years.
When an xD-Picture Card is removed, the
card may fly completely out of the slot.
Use your finger to stop the card flying out
before removing the card.
If an xD-Picture Card is allowed to fly out, it
could hit someone and cause injury.
Keep out of the reach of small children.
This product could cause injury in the hands
of a child.
Do not use this camera in locations
severely affected by oil fumes, steam,
humidity or dust.
This can cause a fire or electric shock.
Do not leave this camera in places subject
to extremely high temperatures.
Do not leave the camera in locations such as
a sealed vehicle or in direct sunlight.
This can cause a fire.
Do not place heavy objects on the camera.
This can cause the heavy object to tip over or
fall and cause injury.
Do not move the camera while the AC
power adapter is still connected.
This can damage the power cord or cables
and cause a fire or electric shock.
Do not cover or wrap the camera or the
AC power adapter in a cloth or quilt.
This can cause heat to build up and distort
the casing or cause a fire.
CAUTION CAUTION
Safety Notes
Never attempt to modify or disassemble
the camera. (Never open the casing.)
Do not use the camera when it has been
dropped or the casing is damaged.
This can cause a fire or electric shock.
h Contact your FUJIFILM dealer.
Never attempt to take pictures while in
motion.
Do not use the camera while you are walking
or operating a moving car or other vehicle.
This can result in you falling down or being
involved in a traffic accident.
Do not heat, modify or attempt to
disassemble the batteries.
Do not drop or subject the batteries to
impacts.
Do not attempt to recharge lithium or
alkaline batteries.
Do not store the batteries with metallic
products.
Any of these actions can cause the batteries to
burst or leak and cause fire or injury as a result.
Do not touch any metal parts of the
camera during a thunderstorm.
This can cause an electric shock due to
induced current from the lightning discharge.
Do not use the batteries except as specified.
Load the batteries with the poles positioned
as indicated by the > and < marks.
Use only the batteries or AC power
adapter specified for use with this camera.
The use of other power sources can cause a
fire.
If the battery leaks and fluid gets into your
eyes or comes into contact with your skin
or clothing, this can cause injury or loss of
eyesight. Immediately flush the affected
area thoroughly with clean water and seek
medical treatment.
When discarding or storing batteries, cover
the battery terminals with insulation tape.
h
Contact with other metallic objects or batteries
could cause the batteries to ignite or burst.
Keep xD-Picture Cards out of the reach of
small children.
Because xD-Picture Cards are small, they
can be accidentally swallowed by small
children. Be sure to store xD-Picture Cards
out of the reach of small children. If a child
accidentally swallows an xD-Picture Card,
seek medical advice immediately
WARNING
Do not
disassemble.
WARNING
134
EC Declaration of Conformity
We
Name
:
Fuji Photo Film
(
Europe
)
G.m.b.H.
Address
:
Heesenstrasse 31
40549 Dusseldorf, Germany
declare that the product
Product Name : FUJIFILM DIGITAL CAMERA FinePix S304
Manufactures Name : Fuji Photo Film Co., Ltd.
Manufactures Address : 26
-
30, Nishiazabu 2
-
chome, Minato
-
ku,
Tokyo 106
-
8620, Japan
is in conformity with the following Standards
Safety
:
EN60950
EMC
:
EN55022
:
1998 Classe B
EN55024
:
1998
EN61000
-
3
-
2
:
1995
+
A1:1998
+
A2:1998
following the provision of the EMC Directive
(
89
/
336
/
EEC, 92
/
31
/
EEC and
93
/
68
/
EEC
)
and Low Voltage Directive
(
73
/
23
/
EEC
)
.
Dusseldorf, Germany September 1, 2002
Place Date Signature/Managing Director
Bij dit produkt zijn batterijen geleverd. Wanneer deze leeg zijn, moet u ze niet
weggooien maar inleveren als KCA
IMPORTANT
Be sure to read this page before using theSoftware.
NOTICE
BEFORE OPENING THE PACKAGE OF CD-ROM PROVIDED BY
FUJI PHOTO FILM CO., LTD., PLEASE READ THIS END USER
LICENSE AGREEMENT CAREFULLY. ONLY IF YOU DO AGREE TO
THIS AGREEMENT, YOU WILL BE ABLE TO USE THE SOFTWARE
RECORDED ON THE CD-ROM. BY OPENING THE PACKAGE, YOU
ACCEPT AND AGREE TO BE BOUND BY THIS AGREEMENT.
End User License Agreement
T
his End User License Agreement (Agreement) is an agreement between Fuji Photo
Film Co., Ltd. (FUJIFILM) and you, which sets forth the terms and conditions of the
license granted for you to use the software provided by FUJIFILM.
The CD-ROM contains third party software. In case a separate agreement is provided by
a third party supplier for its software, the provisions of such separate agreement shall
apply to the use of such third party software, prevailing over those of this Agreement.
1. Definitions.
(a) Media means the CD-ROM titled Software for FinePix SX which is provided
to you together with this Agreement.
(b) Software means the software which is recorded on Media.
(c) Documentation means the operation manuals of Software and other related
written materials which are provided to you together with Media.
(d) Product means Media (including Software) and Documentation collectively.
2. Use of Software.
FUJIFILM grants to you a nontransferable, nonexclusive license:
(a)
to install one copy of Software onto one computer in binary machine executable form;
(b) to use Software on the computer onto which Software is installed; and
(c) to make one backup copy of Software.
3. Restrictions.
3.1 You shall not distribute, rent, lease or otherwise transfer all or any part of
Software, Media or Documentation to any third party without FUJIFILMs prior
written consent. You also shall not sublicense, assign or otherwise transfer all
or any part of the rights granted to you by FUJIFILM under this Agreement
without FUJIFILMs prior written consent.
3.2 Except as expressly granted by FUJIFILM hereunder, you shall not copy or
reproduce all or any part of Software or Documentation.
3.3 You shall not modify, adapt or translate Software or Documentation. You also
shall not alter or remove copyright and other proprietary notices that appear on
or in Software or Documentation.
3.4 You shall not, or shall not have any third party, reverse-engineer, decompile,
or disassemble Software.
4. Ownership.
All copyrights and other proprietary rights to Software and Documentation are
owned and retained by FUJIFILM or the third party suppliers as indicated on or in
Software or Documentation. Nothing contained herein shall be construed,
expressly or implicitly, as transferring or granting any right, license, or title to you
other than those explicitly granted under this Agreement.
5. Limited Warranty.
FUJIFILM warrants to you that Media is free from any defect in material and
workmanship under normal use for ninety (90) days from the date of your receipt of
Media. Should Media not meet the foregoing warranty, FUJIFILM shall replace
such defective Media with other Media bearing no defect. FUJIFILMs entire liability
and your sole and exclusive remedy with regard to any defect in Media shall be
expressly limited to such FUJIFILMs replacement of Media as provided herein
6. DISCLAIMER OF WARRANTY.
EXCEPT AS PROVIDED IN SECTION 5 HEREIN, FUJIFILM PROVIDES
PRODUCT AS IS AND WITHOUT WARRANTIES OF ANY KIND, EXPRESS OR
IMPLIED. FUJIFILM SHALL MAKE NO WARRANTY, EXPRESS, IMPLIED OR
STATUTORY, AS TO ANY OTHER MATTERS, INCLUDING, BUT NOT LIMITED
TO NON-INFRINGEMENT OF ANY COPYRIGHT, PATENT, TRADE SECRET,
OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY,
MARCHANTABILITY, OR FITNESS FOR ANY PARTICULAR PURPOSE.
7. LIMITATION OF LIABILITY.
IN NO EVENT SHALL FUJIFILM HAVE ANY LIABILITY FOR ANY GENERAL,
SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR OTHER
DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS OR LOST SAVINGS)
INCURRED FROM THE USE OF OR INABILITY TO USE PRODUCT EVEN IF
FUJIFILM HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
8. No export.
You acknowledge that neither Software nor any part thereof, will be transferred, or
exported to any country or used in any manner in violation of any export control
laws and regulations to which Software is subject.
9. Termination.
In case you breach any of the terms and conditions hereof, FUJIFILM may
immediately terminate this Agreement without any notice.
10. Term.
This Agreement is effective until the date when you cease to use
Software, unless earlier terminated in accordance with Section 9 hereof.
11. Obligation upon termination.
Upon termination or expiration of this Agreement, you shall, at your own
responsibility and expense, delete or destroy immediately all Software
(including its copies), Media and Documentation.
12. Governing Law.
This Agreement shall be governed by and construed in accordance with
laws of Japan.
Printed in Japan FGS
-
204107
-
FG
Printed on recycled paper.
26
-
30, Nishiazabu 2
-
chome, Minato
-
ku, Tokyo 106
-
8620, Japan
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujifilm Finepix S 304 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm Finepix S 304 in the language / languages: English as an attachment in your email.

The manual is 5,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info