101573
40
Zoom out
Zoom in
Previous page
1/67
Next page
79
5
POWER SAVE
SET–UP
When the camera is in sleep mode, pressing the
Shutter button down halfway brings the camera
back to full operational mode. This is a useful
feature as it allows you to take pictures more
quickly than switching the camera off and then
on again. You can also take a picture by pressing
the Shutter button all the way down.
!
Operation can also be restored by pressing buttons
other than the Shutter button.
Bebeep
To restore power to the camera
Turn the Power switch to
“OFF” briefly and then
back to “q”.
SET−UP
1/2
SET CANCELOK
BACK
POWER SAVE
FF
FORMAT
OK
ON
LOW
BEEP
DATE/TIME SET
IMAGE DISP.
hPower saving OFF(default setting)
The camera does not use measures such as
“sleep” to reduce power consumption. However, if
the camera is not used for approximately 2 minutes,
this function automatically switches the camera off.
hPower saving ON
Power consumption is kept to a minimum to
prevent battery depletion.
i If the camera is not used for approximately 30
seconds, the screen switches off temporarily
to reduce power consumption (Sleep mode).
i Once the camera is in Sleep mode, if it is left
unused for a further 90 seconds, it is
automatically switched off.
i The charging time for the flash increases
slightly because the flash charging power is
reduced.
78
SETUP Menu Options
Settings Display Explanation
IMAGE DISP.
FORMAT
POWER SAVE
) BEEP
ON/OFF
OK
ON/OFF
LOW/HIGH/OFF
This option specifies whether or not an image checking screen (photography
results) is displayed after you take a shot.
The photographed image is displayed for a few moments and then
automatically recorded.
In continuous shooting, the photography results are displayed for a set time
before being automatically recorded even if this option is set to “OFF”.
Erases all files. See P.80 for details.
This function temporarily switches the screen off if the camera is not used for
approximately 30 seconds. See P.79 for details.
Sets the volume of the tone emitted when the camera controls are used.
Default
setting
ON
OFF
LOW
DATE/TIME
SET Use this option to correct the date or time. See P.18 for details.
VIDEO SYSTEM
NTSC/PAL Specifies whether video output is set to NTSC or PAL.
Use this setting to specify the language used for LCD monitor display.
q RESET
OK
Resets all the camera settings other than the date and time, language and
video output settings to the factory default values set at shipment. Pressing “c
displays a confirmation screen. To reset the settings, press the “MENU/OK”
button.
ENGLISH
USB MODE
LANGUAGE
(/UPC
Selects the function when the camera is connected to a PC.
See P.97 for details.
(
g USING SET–UP
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujifilm Finepix S 3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm Finepix S 3000 in the language / languages: English as an attachment in your email.

The manual is 4,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info