Warning Displayed
LCD monitor
Explanation Remedy
The built-in flash was popped up
even though the battery adapter is
used.
The built-in flash cannot be used if the
lithium batteries are not installed.
The AA-size batteries are low on
charge.
Have replacement AA-size batteries
ready.
1000 or more prints were specified in
the DPOF frame settings.
See P.92 for details.
The maximum number of frames for which
printing can be specified on the same
SmartMedia is 999. Set no more than 999
frames.
Warning Displays
Warning Displayed
LCD monitor
Explanation Remedy
No media is inserted.
i Load a SmartMedia (3.3V) in the correct
direction.
i Load a Microdrive in the correct
direction.
i The media is not formatted
(initialized).
i The SmartMedia contact area
(gold-colored area) is soiled.
i The camera is faulty.
i Format the media.
i Wipe the SmartMedia contact area with
a soft, dry cloth. It may also be
necessary to format the SmartMedia. If
an error message still appears, replace
the SmartMedia.
i Contact your FUJIFILM dealer.
i The SmartMedia is not loaded
correctly.
i The SmartMedia contact area
(gold-colored area) is soiled.
i The media is damaged.
i The media format is incorrect.
i The camera is faulty.
i Push the SmartMedia all the way into
the slot and check that it is locked into
place.
i Wipe the SmartMedia contact area with
a soft, dry cloth. It may also be
necessary to format the SmartMedia. If
an error message still appears, replace
the SmartMedia.
i Contact your FUJIFILM dealer.
The media is full and no further data
can be recorded.
Erase some images or use a media that
has some available space.
The SmartMedia is write-protected. Use a SmartMedia that is not write-
protected.
i You attempted to play back file that
was not recorded correctly.
i The SmartMedia contact area
(gold-colored area) is soiled.
i The camera is faulty.
i That data cannot be played back.
i Wipe the SmartMedia contact area with
a soft, dry cloth. It may also be
necessary to format the SmartMedia. If
an error message still appears, replace
the SmartMedia.
i Contact your FUJIFILM dealer.
Frame number 999-9999 has been
reached.
Use a formatted SmartMedia to take
pictures.
i Data cannot be recorded due to a
media fault or a problem with the
connection between the media and
the camera.
i The image you just shot is too large
to fit in the space available on the
media.
i Reload the media or switch the camera
off and then on again. If this does not
remedy the problem, contact your
FUJIFILM dealer.
i Use a new media.
You attempted to erase a protected
frame.
Protected frames cannot be erased.
Remove the protection using the camera
on which the protection was applied.