288584

Fujifilm finepix s 2 pro Manual

55
Zoom out
Zoom in
Previous page
1/65
Next page
109108
6
Hold down the release mode switch unlock
button and set the release mode switch to “e”
(single-frame).
7
Hold down both the Synchro mode button and
the LCD illumination button and switch the
camera on.
8
When you press the shutter button, the mirror
flips up and the shutter opens and stays open.
●
!
When you release the shutter button, the mirror stays up.
5
Set the exposure mode dial to “M”.
Cleaning the CCD
This camera is equipped with a CCD photosensitive element. This CCD is located behind the
shutter screen.
If dust or other soiling attaches to the surface of the CCD and pictures are then taken, this soiling may
appear as spots in the image, depending on the camera settings and the type of subject. If this occurs,
the CCD must be cleaned. Because the surface of the CCD is extremely fragile, wherever possible the
camera should be returned to an authorized FUJIFILM dealer for cleaning (for a charge).
Any repairs carried out by an authorized FUJIFILM service facility to CCDs that were scratched
or damaged during cleaning by the customer will be charged to the customer. Note that such
repairs will probably involve replacing the CCD and will be expensive.
2
Open the terminal cover and fully insert the
connector plug from the AC power adapter (sold
separately) into the “DC IN 5V” socket. Then
plug the AC power adapter into the power outlet.
●
!
When cleaning the camera, always use the AC power
adapter (sold separately) to prevent camera damage due
the mirror dropping down or the shutter closing.
●
!
See P.112 for more information on using the AC power
adapter.
4
22
ftft
m
2828
70
5050
3535
2
8
28
8
5
85
1
0
5
105
22
22
ftft
m
2828
70
5050
3535
2
8
28
8
5
85
1
0
5
105
22
22
ftft
m
2828
70
5050
3535
2
8
28
8
5
85
1
0
5
105
22
ft
m
28
70
50
35
2
8
8
5
1
0
5
1
2
Hold down the lens release button and turn the
lens in the direction of the arrow.
Check that the camera is switched off and then
remove the lithium batteries.
1
1
2
●
!
Do not apply excessive force to the battery cover.
DC IN 5V
Socket
3
Press the built-in flash down to stow it away.
◆
Dust inside the camera and on the surface of the CCD
◆
i Before a FUJIFILM digital camera is shipped from the factory, it is carefully checked for dust
inside the camera and on the surface of the CCD to ensure that it conforms to FUJIFILM
standards.
i Bear in mind also that some types of soiling on the CCD surface cannot be removed even by an
authorized FUJIFILM service facility.
Should this occur, you can use features such as the despeckling function provided in the image
processing software to remedy the problem.
Checking the Condition of the CCD Surface
Continued over page...
… 55 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujifilm finepix s 2 pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm finepix s 2 pro in the language / languages: English as an attachment in your email.

The manual is 4,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info