6
Set the metering system selector to “'” (Matrix
Metering).
●
!
Matrix Metering indication “'” appears in the viewfinder.
●
!
Take care not to obscure the lens with your fingers or the
shoulder strap.
7
Set the exposure mode select dial to “P” (Auto-
Multi Progam).
8
Brace your elbows against your body and hold
the camera with both hands.
9
Position the central focus area over the subject.
●
!
If the subject is not inside the AF frame, move the focus
area or take the picture using AF lock (➡P.33).
1
Set the focus mode selector to “S” (Single-AF
Servo).
2
1Press the “w” button to display the AF
setting on the rear display panel.
2Press the “F2” button to select “z” single
area.
●
!
Make sure to turn the focus mode selector until it clicks
into position.
3
1Unlock the 4-direction button.
2Press “d”, “c”, “a” or “b” to position the
focusing area in the center.
4
Lock the 4-direction button to prevent accidental
improper use.
5
Hold down the release mode switch unlock
button and set the release mode switch to “e”
(Single-frame).
●
!
The selected focus area indicator appears on the top
display panel, in the viewfinder display and on the
viewfinder screen (➡P.39).
01
02
01 02
