288584

Fujifilm finepix s 2 pro Manual

13
Zoom out
Zoom in
Previous page
1/65
Next page
24 25
SWITCHING ON AND OFF
•
SETTING THE DATE AND TIME
CHECKING THE BATTERY LEVEL
Getting Ready
1
To switch the camera on, set the Power switch
to “ON”.
To switch the camera off, set the Power switch
to “OFF”.
1
2
ＤＡＴＥ／ＴＩＭＥＤＡＴＥ／ＴＩＭＥ
ＮＯＴ ＳＥＴＮＯＴ ＳＥＴ
ＳＥＴＳＥＴ ＮＯＮＯ
ＯＫＯＫ
ＢＡＣＫＢＡＣＫ
●
!
To set the date and time later, press the “BACK” button.
●
!
If you do not set the date and time, this confirmation
message will appear each time you switch the camera
on.
When you first switch the camera on, the date is
cleared. Press the “MENU/OK” button to set the
date and time.
3
4
1Unlock the 4-direction button.
2Press “d” or “c” to select year, month, day,
hour or minute and then press “a” or “b” to
adjust the selected setting.
1Press the “MENU/OK” button.
This switches the camera to Photography
mode.
2When you have finished the procedure, lock
the 4-direction button to prevent accidental
improper use.
●
!
To set the time precisely, press the “MENU/OK” button
when the time is at zero seconds.
●
!
Once the AC power adapter has been connected or the
batteries have been loaded for 2 days or more, the date
and time settings will be retained for roughly 6 months
even when the camera has no power (batteries removed
and AC power adapter disconnected).
●
!
If you hold down “a ” or “b ”, the numbers change
continuously.
●
!
When the time displayed passes “12:00:00”, the AM/PM
setting automatically switches.
01 02
ＤＡＴＥ／ＴＩＭＥＤＡＴＥ／ＴＩＭＥ
２００２ ２００２ ． ０２ ． １５． ０２ ． １５
 １１ ： ５９ ： ５９ ＰＭ １１ ： ５９ ： ５９ ＰＭ
ＯＫＯＫ
ＢＡＣＫＢＡＣＫ
01 02
ＤＡＴＥ／ＴＩＭＥＤＡＴＥ／ＴＩＭＥ
２００２ ． ０２ ． １５２００２ ． ０２ ． １５
 １１ ：  １１ ： ５９ ５９ ：５９ ＰＭ：５９ ＰＭ
ＯＫＯＫ
ＢＡＣＫＢＡＣＫ
Switch the camera on and check the battery charge indicator.
1There is ample charge in the batteries.
2The batteries are low on charge and will run out shortly. You should replace the batteries.
3The batteries are fully depleted. You must replace the batteries. The display switches off and
the camera stops operating, after which the display lights again.
Loss of power while an image is being saved will prevent the image from being saved successfully.
Take note of the battery level when you are taking shots where image saving will take some time
(continuous shooting or when the quality is set to “HIGH”).
Lithium batteries (Top display panel)
◆
Auto Power Off Function
◆
AA-size batteries (Rear display panel)
3
Blinking
Lit
Lit
1
2
3
Blinking
Lit
Lit
1
2
■ Batteries Uses and Symptoms When Batteries are Depleted
■ When you have difficulty obtaining lithium batteries
Uses Symptoms When Depleted
AA-size Alkaline batteries Image processing
“
∞
” appears on the top display panel
Lithium batteries CR123A Power functions such as auto focus,
aperture, mirror and shutter operation,
and charge the flash.
The camera will not switch on.
You can take pictures using only the four AA-size Ni-MH (nickel-metal hydride batteries), but the
built-in flash cannot be used. When you are using only the four AA-size Ni-MH batteries, remove
the used lithium batteries from the camera.
The time for which the camera can be used is shorter, and as far as possible this should only be
used as an emergency measure. Note that the displays on the top and rear display panels both
function as battery level indicators for the AA-size Ni-MH batteries.
✽ When you are taking pictures in locations where you think you will have difficulty purchasing lithium batteries, it is a
good idea to take along some spare lithium batteries or carry some fully charged Ni-MH batteries for emergencies.
✽ The camera cannot be used just with alkaline batteries.
If you leave the camera switched on without using it, this function automatically switches the
camera off (➡P.98).
If the Auto Power Off function has shut down the camera, restore power to the camera by pressing
the shutter button down halfway or pressing the LCD illuminator button. A small amount of battery
charge is consumed even when Auto Power Off has shut down the camera.
1Press the “MENU/OK” button to display the SET–UP screen.
2Use “a” or “b” to select “DATE/TIME” and then press “c”.
To correct the date/time
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujifilm finepix s 2 pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm finepix s 2 pro in the language / languages: English as an attachment in your email.

The manual is 4,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info