289757
2
Zoom out
Zoom in
Previous page
1/128
Next page
Before You Begin
First Steps
Basic Photography and Playback
More on Photography
More on Playback
Movies
Connections
Menus
Technical Notes
Troubleshooting
Appendix
For information on related products, visit our website at
http://www.fujifilm.com/products/index.html
Owners Manual
Thank you for your purchase of this
product. This manual describes how
to use your FUJIFILM REAL 3D W1
digital camera and the supplied soft-
ware. Be sure that you have read and
understood its contents before using
the camera.
BL00963 -200
EN
ii
For Your Safety
IMPORTANT SAFETY INSTRUCTIONS
Read Instructions: All the safety and op-
erating instructions should be read
before the appliance is operated.
Retain Instructions: The safety and
operating instructions should be
retained for future reference.
Heed Warnings: All warnings on the
appliance and in the operating in-
structions should be adhered to.
Follow Instructions: All operating and
use instructions should be followed.
Installation
Installation
Power Sources: This video product
should be operated only from the
type of power source indicated on
the marking label. If you are not sure
of the type of power supply to your
home, consult your appliance dealer
or local power company. For video
products intended to operate from
battery power, or other sources, refer
to the operating instructions.
Grounding or Polarization: This video
product is equipped with a polar-
ized alternating-current line plug (a
plug having one blade wider than
the other). This plug will  t into the
power outlet only one way. This is a
safety feature. If you are unable to
insert the plug fully into the outlet,
try reversing the plug. If the plug
should still fail to  t, contact your
electrician to replace your obsolete
outlet. Do not defeat the safety pur-
pose of the polarized plug.
Alternate Warnings: This video prod-
uct is equipped with a three-wire
grounding-type plug, a plug having
a third (grounding) pin. This plug
will only  t into a grounding-type
power outlet. This is a safety feature.
If you are unable to insert the plug
into the outlet, contact your electri-
cian to replace your obsolete outlet.
Do not defeat the safety purpose of
the grounding type plug.
Overloading: Do not overload wall out-
lets and extension cords as this can
result in a risk of  re or electric shock.
Ventilation: Slots and openings in
the cabinet are provided for ventila-
tion, to ensure reliable operation of
the video product and to protect it
from overheating, and these open-
ings must not be blocked or cov-
ered. The openings should never
be blocked by placing the video
product on a bed, sofa, rug, or other
similar surface.
This video product should not be
placed in a built-in installation such
as a bookcase or rack unless proper
ventilation is provided or the manu-
facturer’s instructions have been ad-
hered to. This video product should
never be placed near or over a radia-
tor or heat register.
Attachments: Do not use attachments
not recommended by the video
product manufacturer as they may
cause hazards.
Water and Moisture: Do not use this
video product near water—for ex-
ample, near a bath tub, wash bowl,
kitchen sink, or laundry tub, in a wet
basement, or near a swimming pool,
and the like.
Power-Cord Protection: Power-sup-
ply cords should be routed so that
they are not likely to be walked on
or pinched by items placed upon
or against them, paying particular
attention to cords at plugs, conve-
nience receptacles, and the point
where they exit from the appliance.
Accessories: Do not place this video
product on an unstable cart, stand,
tripod, bracket, or table. The video
product may fall, causing serious in-
jury to a child or adult, and serious
damage to the appliance. Use only
with a cart, stand, tripod, bracket, or
table recommended by the manufac-
turer, or sold with the video product.
Any mounting of the appliance should
follow the manufacturer’s instructions,
and should use a mounting accessory
recommended by the manufacturer.
An appliance and
cart combination
should be moved
with care. Quick
stops, excessive
force, and uneven
surfaces may
cause the appliance and cart combi-
nation to overturn.
Antennas
Antennas
Outdoor Antenna Grounding: If an
outside antenna or cable system is
connected to the video product, be
sure the antenna or cable system is
grounded so as to provide some pro-
tection against voltage surges and
built-up static charges. Section 810
of the National Electrical Code, ANSI/
NFPA No. 70, provides information
with respect to proper grounding
of the mast and supporting struc-
ture, grounding of the lead-in wire
to an antenna discharge unit, size of
grounding conductors, location of
antenna discharge unit, connection
to grounding electrodes, and require-
ments for the grounding electrode.
EXAMPLE OF ANTENNA GROUNDING AS
PER NATIONAL ELECTRICAL CODE
Antenna Lead
in Wire
Ground
Clamp
Electric
Service
Equipment
Ground
Clamps
Grounding
Conductors
(NEC SECTION
810-21)
Power Service Grounding
Electrode System (NEC
ART 250. PART H)
Antenna
Discharge
Unit (NEC
SECTION
810-20)
Power Lines: An outside antenna sys-
tem should not be located in the
vicinity of overhead power lines or
other electric light or power circuits,
iii
For Your Safety
or where it can fall into such power
lines or circuits. When installing an
outside antenna system, extreme
care should be taken to keep from
touching such power lines or circuits
as contact with them might be fatal.
Use
Use
Cleaning: Unplug this video product
from the wall outlet before clean-
ing. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth
for cleaning.
Object and Liquid Entry: Never push
objects of any kind into this video
product through openings as they
may touch dangerous voltage points
or short out parts that could result in a
re or electric shock. Never spill liquid
of any kind on the video product.
Lightning: For added protection for
this video product receiver during
a lightning storm, or when it is left
unattended and unused for long pe-
riods of time, unplug it from the wall
outlet and disconnect the antenna
or cable system. This will prevent
damage to the video product due to
lightning and power-line surges.
Service
Service
Servicing: Do not attempt to service
this video product yourself as open-
ing or removing covers may expose
you to dangerous voltage or other
hazards. Refer all servicing to quali-
ed service personnel.
Damage Requiring Service: Unplug this
video product from the wall outlet
and refer servicing to quali ed ser-
vice personnel under the following
conditions:
When the power-supply cord or
plug is damaged.
• If liquid has been spilled, or objects
have fallen into the video product.
If the video product has been ex-
posed to rain or water.
If the video product has been
dropped or the cabinet has been
damaged.
If the video product does not oper-
ate normally follow the operating
instructions. Adjust only those
controls that are covered by the op-
erating instructions as an improper
adjustment of other controls may re-
sult in damage and will often require
extensive work by a quali ed techni-
cian to restore the video product to
its normal operation.
When the video product exhibits a
distinct change in performance—
this indicates a need for service.
Replacement Parts: When replacement
parts are required, be sure the service
technician has used replacement
parts speci ed by the manufacturer
or have the same characteristics as
the original part. Unauthorized sub-
stitutions may result in  re, electric
shock or other hazards.
Safety Check: Upon completion of any
service or repairs to this video prod-
uct, ask the service technician to
perform safety checks to determine
that the video product is in proper
operating condition.
Be sure to read these notes before use
Safety Notes
Make sure that you use your camera correctly. Read these safety notes and
your Owner’s Manual carefully before use.
After reading these safety notes, store them in a safe place.
About the Icons
The icons shown below are used in this document to indicate the severity of
the injury or damage that can result if the information indicated by the icon
is ignored and the product is used incorrectly as a result.
WARNING
This icon indicates that death or serious injury can result if the information
is ignored.
CAUTION
This icon indicates that personal injury or material damage can result if the
information is ignored.
The icons shown below are used to indicate the nature of the instructions
which are to be observed.
Triangular icons tell you that this information requires attention (“Impor-
tant”).
Circular icons with a diagonal bar tell you that the action indicated is prohib-
ited (“Prohibited”).
Filled circles with an exclamation mark indicate an action that must be per-
formed (“Required”).
WARNING
WARNING
Unplug from
power socket
If a problem arises, turn the camera o , remove the battery, and disconnect and unplug the
AC power adapter. Continued use of the camera when it is emitting smoke, is
emitting any unusual odor, or is in any other abnormal state can cause a re
or electric shock. Contact your FUJIFILM dealer.
Do not allow water or foreign objects to enter the camera. If water or foreign objects
get inside the camera, turn the camera o , remove the battery, and discon-
nect and unplug the AC power adapter. Continued use of the camera can
cause a  re or electric shock. Contact your FUJIFILM dealer.
iv
For Your Safety
WARNING
WARNING
Do not use in
the bathroom
or shower
Do not use the camera in the bathroom or shower. This can cause a  re or electric
shock.
Do not
disassemble
Never attempt to change or take apart the camera. (Never open the casing.) Do not use the
camera when it has been dropped or the casing is damaged. This can cause a  re or
electric shock. Contact your FUJIFILM dealer.
Do not change, heat or unduly twist or pull the connection cord and do not place heavy ob-
jects on the connection cord. These actions could damage the cord and cause a
re or electric shock. If the cord is damaged, contact your FUJIFILM dealer.
Do not place the camera on an unstable surface. This can cause the camera to fall or
tip over and cause injury.
Never attempt to take pictures while in motion. Do not use the camera while you
are walking or driving a vehicle. This can result in you falling down or being
involved in a tra c accident.
Do not touch any metal parts of the camera during a thunderstorm. This can cause an
electric shock due to induced current from the lightning discharge.
Do not use the battery except as speci ed. Load the battery as shown by the in-
dicator.
Do not heat, change or take apart the battery. Do not drop or subject the battery to im-
pac ts. Do not store the batter y with metallic products. Any of these actions can cause
the battery to burst or leak and cause  re or injury as a result.
Use only the battery or AC power adapters speci ed for use with this camera. Do not use
voltages other than the power supply voltage shown. The use of other power sources
can cause a  re.
If the bat tery l eaks a nd  u id gets in contac t with yo ur eyes , skin or c lothi ng,  ush the a  ected
area with clean water and seek medical attention or call an emergency number right away.
Do not use the AC power adapter to charge batteries other than those speci ed here. The
supplied AC power adapter is for use only with the type of battery supplied
with the camera. Using the adapter to charge conventional batteries or other
types of rechargeable batteries can cause the battery to leak  uid, overheat
or burst.
When carrying the battery, install it in a digital camera or keep it in the hard case. When
storing the battery, keep it in the hard case. When discarding, cover the battery terminals
with insulation tape. Contact with other metallic objects or batteries could
cause the battery to ignite or burst.
WARNING
WARNING
Keep memory cards out of the reach of small children. Because memory cards are
small, they can be swallowed by children. Be sure to store memory cards out
of the reach of small children. If a child swallows a memory card, seek medical
attention or call an emergency number.
CAUTION
CAUTION
Do not use this camera in locations a ected by oil fumes, steam, humidity or dust. This
can cause a  re or electric shock.
Do not leave this camera in places subject to extremely high temperatures. Do not leave
the camera in locations such as a sealed vehicle or in direct sunlight. This
can cause a  re.
Keep out of the reach of small children. This product could cause injury in the
hands of a child.
Do not place heavy objects on the camera. This can cause the heavy object to tip
over or fall and cause injury.
Do not move the camera while the AC power adapter is still connected. Do not pull on the
connection cord to disconnect the AC power adapter. This can damage the power
cord or cables and cause a  re or electric shock.
Do not cover or wrap the camera or the AC power adapter in a cloth or blanket. This can
cause heat to build up and distort the casing or cause a  re.
When you are cleaning the camera or you do not plan to use the camera for an extended
period, remove the battery and disconnect and unplug the AC power adapter. Failure to
do so can cause a  re or electric shock.
When charging ends, unplug the AC power adapter from the power socket. Leaving the
adapter plugged into the power socket can cause a  re.
Using a  ash too close to a person’s eyes may temporarily a ect the eyesight. Take par-
ticular care when photographing infants and young children.
When a memory card is removed, the card could come out of the slot too quickly. Use your
nger to hold it and gently release the card.
Request regular internal testing and cleaning for your camera. Build-up of dust in your
camera can cause a  re or electric shock. Contact your FUJIFILM dealer to
request internal cleaning every two years. Please note that this service is not
free of charge.
v
For Your Safety
The Battery and Power Supply
The following describes the proper
use of the battery and how to
prolong its life. Incorrect use can
shorten battery life or cause leakage,
overheating,  re, or explosion.
The battery is not charged at ship-
ment. Charge the battery before
use. Keep the battery in its case
when not in use.
Notes on the Battery
The battery gradually loses its charge
when not in use. Charge the battery
one or two days before use.
Battery life can be extended by turn-
ing the camera o when not in use.
Battery capacity decreases at low tem-
peratures; a depleted battery may not
function at when cold. Keep a fully
charged spare battery in a warm place
and exchange as necessary, or keep
the battery in your pocket or other
warm place and insert it in the camera
only when shooting. Do not place the
battery in direct contact with hand
warmers or other heating devices.
Charging the Battery
Charge the battery using the supplied
AC power adapter (pg. 6). Charging
times will increase at ambient tem-
peratures below +10 °C (+50 °F) or
above +35 °C (+95 °F). Do not attempt
to charge the battery at temperatures
above 40 °C (+104 °F); at temperatures
below 0 °C (+32 °F), the battery will not
charge.
Do not attempt to recharge a fully
charged battery. The battery does
not however need to be fully dis-
charged before charging.
The battery may be warm to the
touch immediately after charging or
use. This is normal.
Battery Life
At normal temperatures, the battery
can be recharged about 300 times.
A noticeable decrease in the length
of time the battery will hold a charge
indicates that it has reached the end
of its service life and should be re-
placed.
Storage
Performance may be impaired if the
battery is left unused for extended
periods when fully charged. Run the
battery  at before storing it.
If the camera will not be used for an
extended period, remove the bat-
tery and store it in a dry place with
an ambient temperature of from
+15 °C to +25 °C (+59 °F to +77 °F). Do
not store in locations exposed to ex-
tremes of temperature.
Cautions: Handling the Battery
Do not transport or store with
metal objects such as necklaces or
hairpins.
Do not expose to  ame or heat.
Do not disassemble or modify.
Charge with designated devices
only.
• Dispose of used batteries promptly.
• Do not drop or subject to strong
physical shocks.
Do not expose to water.
Keep the terminals clean.
The battery and camera body may
become warm to the touch after
extended use. This is normal.
AC power adapters
Use only FUJIFILM AC power adapt-
ers designated for use with this cam-
era. Other adapters could damage
the camera.
The AC power adapter is for indoor
use only.
Be sure the DC plug is securely
connected to the camera.
Turn the camera o before discon-
necting the adapter. Disconnect the
adapter by the plug, not the cable.
Do not use with other devices.
Do not disassemble.
• Do not expose to high heat and
humidity.
Do not subject to strong physical
shocks.
• The AC power adapter may hum or
become hot to the touch during
use. This is normal.
If the AC power adapter causes
radio interference, reorient or relo-
cate the receiving antenna.
Using the Camera
To ensure that images are recorded
correctly, do not subject the camera
to impact or physical shocks while
images are being recorded.
Electrical Interference
This camera may interfere with hos-
pital or aviation equipment. Consult
with hospital or airline sta before
using the camera in a hospital or on
an aircraft.
Liquid Crystal
In the event that the monitor is dam-
aged, care should be taken to avoid
contact with liquid crystal. Take the
urgent action indicated should any
of the following situations arise:
If liquid crystal comes in contact with
your skin, clean the area with a cloth
and then wash thoroughly with
soap and running water.
If liquid crystal enters your eyes,  ush
the a ected eye with clean water
for at least 15 minutes and then
seek medical assistance.
If liquid crystal is swallowed, rinse
your mouth thoroughly with water.
Drink large quantities of water and
induce vomiting, then seek medi-
cal assistance.
Take Test Shots
Before taking photographs on impor-
tant occasions (such as at weddings
or before taking the camera on a trip),
take a test shot and view the result in
the monitor to ensure that the cam-
era is functioning normally. FUJIFILM
Corporation can not accept liability
for damages or lost pro ts incurred
as a result of product malfunction.
vi
For Your Safety
To prevent  re or shock hazard, do not expose the unit to rain or moisture.
Please read the “Safety Notes” (pages iii–v) and make sure you understand
them before using the camera.
Perchlorate Material—special handling may apply. See http://www.dtsc.
ca.gov/hazardouswaste/perchlorate.
For Customers in the U.S.A.
For Customers in the U.S.A.
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful interfer-
ence, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
CAUTION
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particu-
lar installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment
o and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit di erent from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modi cations not expressly approved
in this manual could void the user’s authority to operate the equipment.
Notes on the Grant
To comply with Part 15 of the FCC Rules, this product must be used with a
FUJIFILM-speci ed ferrite-core A/V cable, USB cable, and DC supply cord.
For Customers in Canada
For Customers in Canada
CAUTION: This Class B digital apparatus complies with Canadian ICES-003.
EC Declaration of Conformity
EC Declaration of Conformity
We
Name: FUJIFILM Electronic Imaging Europe GmbH
Address: Benzstrasse 2
47533 Kleve, Germany
declare that the product
Product Name: FUJIFILM DIGITAL CAMERA REAL 3D W1
Manufacturers Name: FUJIFILM Corporation
Manufacturers Address: 7-3, AKASAKA 9-CHOME, MINATO-KU,
TOKYO 107-0052 JAPAN
conforms to the following Standards:
Safety: EN60065: 2002 + A1: 2006
EMC: EN55022: 1998 + A1: 2000 + A2: 2003 Class B
EN55024: 1998 + A1: 2001 + A2: 2003
EN61000-3-2: 2006
EN61000-3-3: 1995 + A1: 2001 + A2: 2005
following the provision of the EMC Directive (2004/108/EC)
and Low Voltage Directive (2006/95/EC).
Kleve, Germany August 1, 2009
Place Date Signature, Managing Director
NOTICES
vii
For Your Safety
Disposal of Electrical and Electronic Equipment in Private Households
Disposal of Electrical and Electronic Equipment in Private Households
Disposal of Used Electrical and Electronic Equipment (Applicable in the European
Union, Norway, Iceland and Liechtenstein)
This symbol on the product, or in the manual and in the
warranty, and/or on its packaging indicates that this prod-
uct shall not be treated as household waste.
Instead it should be taken to an applicable collection point
for the recycling of electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will
help prevent potential negative consequences to the en-
vironment and human health, which could otherwise be
caused by inappropriate waste handling of this product.
This symbol on the batteries or accumulators indicates that
those batteries shall not be treated as household waste.
If your equipment contains easy removable batteries or ac-
cumulators please dispose these separately according to
your local requirements.
The recycling of materials will help to conserve natural resources. For more
detailed information about recycling this product, please contact your local
city o ce, your household waste disposal service or the shop where you
purchased the product.
In Countries Outside the European Union, Norway, Iceland and Liechtenstein
If you wish to discard this product, including the batteries or accumula-
tors, please contact your local authorities and ask for the correct way of
disposal.
Notes on Copyright
Notes on Copyright
Unless intended solely for personal use, images recorded using your digital
camera system cannot be used in ways that infringe copyright laws with-
out the consent of the owner. Note that some restrictions apply to the
photographing of stage performances, entertainments, and exhibits, even
when intended purely for personal use. Users are also asked to note that
the transfer of memory cards containing images or data protected under
copyright laws is only permissible within the restrictions imposed by those
copyright laws.
Trademark Information
Trademark Information
xD-Picture Card is a trademark of FUJIFILM Corporation. Macintosh, Quick-
Time, and Mac OS are trademarks of Apple Inc. in the U.S.A. and other
countries. Microsoft, Windows, the Windows logo, Windows Vista and the
Windows Vista logo are trademarks or registered trademarks of Microsoft
Corporation in the United States and/or other countries. “Windows” is an
abbreviation used in reference to the Microsoft Windows operating system.
Adobe and Adobe Reader are either trademarks or registered trademarks
of Adobe Systems Incorporated in the U.S.A. and/or other countries. The
IrSimple, IrSS, and IrSimpleShot trademarks are owned by the Infrared Data
Association®. The SDHC logo is a trademark.
Note: The “Designed for Microsoft® Windows® XP” and “
CERTIFIED FOR Windows
Vista™” logos apply only to the camera and camera hardware driver.
viii
About This Manual
Before using the camera, read this manual and the warnings on pages ii–vii. For information on speci c
topics, consult the sources below.
Memory Cards
Pictures can be stored in the camera’s internal memory or on optional SD and SDHC memory cards. In this
manual, SD memory cards are referred to as “memory cards.” For more information, see page 9.
Troubleshooting
Troubleshooting
..............................................
..............................................
pg. 91
pg. 91
Having a speci c problem with the camera?
Find the answer here.
Glossary
Glossary
........................................................
........................................................
pg. 102
pg. 102
The meanings of some technical terms may be
found here.
Table of Contents
Table of Contents
.............................................
.............................................
pg. xii
pg. xii
The “Table of Contents” gives an overview of the
entire manual. The principal camera operations
are listed here.
Warning Messages and Displays
Warning Messages and Displays
.......................
.......................
pg. 98
pg. 98
Find out what’s behind that ashing icon or error
message in the monitor.
Camera Q & A
Camera Q & A
....................................................
....................................................
pg. ix
pg. ix
Know what you want to do but dont know the
name for it? Find the answer in “Camera Q & A.”
ix
Camera Q & A
Find items by task.
Camera Setup
Camera Setup
Question
Question
Key phrase
Key phrase
See page
See page
How do I set the camera clock? Date and time 11
Can I set the clock to local time when I travel? Time di erence 86
How do I keep the display from turning o automatically? Auto power o 85
How do I make the display brighter or darker? LCD brightness 84
How do I stop the camera beeping and clicking?
Operation and shutter volume 80
Silent mode 16
Can I change the sound the shutter makes? Shutter sound 80
What are the parts of the camera called? Parts of the camera 2
What do the icons in the display mean? Displays 3
How do I use the menus? Menus 57
What’s behind that  ashing icon or error message? Messages and displays 98
How much charge is left in the battery? Battery level 14
Sharing Pictures
Sharing Pictures
Question
Question
Key phrase
Key phrase
See page
See page
Can I print pictures on my home printer? Printing pictures
*
45
Can I copy my pictures to my computer? Viewing pictures on a computer 50
Can I copy pictures to a hand-held device? Infrared (IR) 54
* For information on printing C pictures, visit http://fujifilm.com/3d/print/.
x
Camera Q & A
Taking Pictures
Taking Pictures
Question
Question
Key phrase
Key phrase
See page
See page
How do I take C photographs? Taking C photographs
13
How do I take D photographs? Taking D photographs
19
How do I shoot movies in C or D?
Recording movies 41
How many pictures can I take? Memory capacity 104
How can I make good portraits? Intelligent Face Detection 64
Can I choose my own settings for di erent scenes? Scene position 27
How do I shoot close-ups? Close-ups (macro mode) 22
How do I keep the  ash from  ring?
Flash mode 23How do I stop my subjects’ eyes glowing red when I use the  ash?
How do I “ ll-in” shadows on back-lit subjects?
How do I take a series of pictures in a single burst? Continuous mode 65
How do I take a group portrait that includes the photographer? Self-timer mode 25
How do I frame pictures with the subject o to one side? Focus lock 20
Can I choose shutter speed or aperture? P, A, and M modes
29, 30,
31
xi
Camera Q & A
Viewing Pictures
Viewing Pictures
Question
Question
Key phrase
Key phrase
See page
See page
How do I switch between C and D views? Switching between C and D
36
How do I view C pictures? Viewing C pictures
18
How do I view D pictures? Viewing D pictures
19
How do I view my pictures? Single-frame playback 36
How do I delete the current picture?
The b button
18
Can I select other pictures for deletion? Deleting pictures 39
Can I zoom in on pictures during playback? Playback zoom 37
How do I view a lot of pictures at once? Multi-frame playback 38
How do I view all pictures taken on the same day? Sort by date 38
Can I protect my pictures from accidental deletion? Protect 73
Can I hide the icons in the display when viewing my pictures? Choosing a display format 36
Can I view my pictures in a slide show? Slide show 69
Can I crop unwanted elements out of my pictures? Crop (trimming) 76
Can I make small copies of pictures? Resize 77
Can I copy pictures from internal memory to a memory card? Copy 74
How do I view my pictures on TV? Viewing pictures on TV 44
xii
For Your Safety ................................................................................. ii
IMPORTANT SAFETY INSTRUCTIONS ...................................... ii
Safety Notes .................................................................................... iii
NOTICES ............................................................................................ vi
About This Manual .......................................................................v iii
Camera Q & A .................................................................................... ix
Before You Begi
Before You Begi
n
n
Introduction .......................................................................................1
Symbols and Conventions .......................................................... 1
Supplied Accessories .................................................................... 1
Parts of the Camera ....................................................................... 2
Camera Displays ..........................................................................3
First Step
First Step
s
s
Inserting the Battery...................................................................... 4
Charging the Battery ..................................................................... 6
Inserting a Memory Card ............................................................. 7
Turning the Camera on and O ...............................................10
Shooting Mode .............................................................................10
Playback Mode ..............................................................................10
Basic Setup ....................................................................................... 11
Basic Photography and Playbac
Basic Photography and Playbac
k
k
Taking C Pictures in Auto Mode .........................................13
Viewing C Pictures .................................................................... 18
Shooting and Viewing D Pictures ...................................... 19
Taking Pictures in D .................................................................19
Viewing Pictures in D..............................................................19
More on Photograph
More on Photograph
y
y
Focus Lock (CD) ......................................................................20
F Macro Mode (Close-ups) (D) ...........................................22
N Using the Flash (Super Intelligent Flash) (CD) .....23
h Using the Self-Timer (CD) ............................................. 25
Shooting Mode (CD) .............................................................27
B AUTO ..........................................................................................27
SP SCENE POSITION ....................................................................27
M MANUAL .....................................................................................29
A APERTURE PRIORITY AE .........................................................30
P PROGRAM AE .............................................................................31
B TWIN CAMERA ................................................................31
V TELE/WIDE ............................................................................32
X 2-COLOR.................................................................................32
W 2-SENSITIV IT Y ....................................................................... 32
A ADVANCED 3D ................................................................33
A INDIVID. SHUTTER 3D .......................................................34
B INTERVAL 3D SHOOTING .................................................35
More on Playbac
More on Playbac
k
k
Playback Options ...........................................................................36
Playback Zoom ..............................................................................37
s Multi-Frame Playback ..........................................................38
Sort by Date ....................................................................................38
A Deleting Pictures ....................................................................39
Table of Contents
xiii
Table of Contents
Movie
Movie
s
s
F Recording Movies ...................................................................41
a Viewing Movies .......................................................................43
Connection
Connection
s
s
Viewing Pictures on TV ...............................................................44
Printing Pictures via USB (D Only) .....................................45
Connecting the Camera ............................................................45
Printing Selected Pictures ........................................................46
Printing the DPOF Print Order ................................................47
Creating a DPOF Print Order ....................................................48
Viewing Pictures on a Computer ............................................50
Installing FinePixViewer ............................................................50
Connecting the Camera ............................................................52
IR Communication ........................................................................54
Sending Pictures to Other Devices ....................................55
Receiving Pictures from Other Devices ............................56
Menu
Menu
s
s
Using the Menus: Shooting Mode .........................................57
Using the F-Mode Menu..........................................................57
F-Mode Menu Options .............................................................58
N ISO ............................................................................................59
O IMAGE SIZE ............................................................................59
T IMAGE QUALITY ..................................................................60
D WHITE BALANCE .................................................................60
P G COLOR ...............................................................61
Using the Shooting Menu .........................................................62
Shooting Menu Options ............................................................63
b FACE DETECTION (D Only) ..........................................64
R CONTINUOUS .......................................................................65
C PHOTOMETRY ......................................................................66
F 2D AF MODE (D Only) ...................................................66
S POWER MANAGEMENT ....................................................67
Using the Menus: Playback Mode ..........................................6 8
Using the F-Mode Menu..........................................................68
F-Mode Menu Options .............................................................69
I SLIDE SHOW .........................................................................69
Using the Playback Menu .........................................................70
Playback Menu Options .............................................................70
i PARALLAX CONTROL (C Only)...................................71
B RED EYE REMOVAL (D Only) .......................................71
C IMAGE ROTATE (D Only) ...............................................72
D PROTECT ................................................................................73
E COPY ........................................................................................74
G CROP........................................................................................76
O RESIZE .....................................................................................77
The Setup Menu .............................................................................78
Using the Setup Menu ...............................................................78
Setup Menu Options ...................................................................80
A IMAGE DISP. ..........................................................................82
B FRAME NO. ............................................................................83
D DIGITAL ZOOM (D Only) ...............................................84
o 3DREC .....................................................................................84
I PLAYBACK VOLUME ...........................................................84
J LCD BRIGHTNESS ................................................................84
K FORMAT..................................................................................85
M AUTO POWER OFF ..............................................................85
xiv
Table of Contents
N TIME DIFFERENCE ...............................................................86
r 3D CAUTION DISP ..............................................................87
q OPT AXIS CONTROL ...........................................................87
Technical Note
Technical Note
s
s
Optional Accessories ...................................................................88
Accessories from FUJIFILM .......................................................89
Caring for the Camera .................................................................90
Troubleshootin
Troubleshootin
g
g
Troubleshooting ............................................................................91
Warning Messages and Displays ............................................ 98
Appendi
Appendi
x
x
Glossary .......................................................................................... 102
Internal Memory/Memory Card Capacity ....................... 104
Speci cations ............................................................................... 105
FUJIFILM Digital Camera Worldwide Network ............. 109
3 Caution: Using the FinePix REAL 3D W1
D display is recommended for young children (up to the age of about six) whose visual system is still maturing
and for individuals with notable di erences in vision between their two eyes, who may  nd it di cult or impos-
sible to observe the C e ect. Should you experience fatigue or discomfort while viewing C images, cease use
immediately. A ten-minute break is recommended about once every half hour. Switch to D immediately if C
images still appear double after you have adjusted parallax. Individuals with a history of photosensitive epilepsy
or heart disease or who are unwell or su ering from fatigue, insomnia, or the a ects of alcohol should refrain from
viewing C images. Viewing C images while in motion may cause fatigue or discomfort.
File Formats
C pictures are recorded in one of two new formats: multi-picture format for photographs (pg. 18, 102) and 3D
movie  le format for movies (pg. 41, 102). D images are recorded in existing formats.
1
Before You Begin
Introduction
Symbols and Conventions
Symbols and Conventions
The following symbols are used in this manual:
3 Caution: This information should be read before use to ensure correct operation.
1 Note: Points to note when using the camera.
2 Tip: Additional information that may be helpful when using the camera.
Menus and other text in the camera monitor are shown in bold. In the illustrations in this manual, the
monitor display may be simpli ed for explanatory purposes.
Supplied Accessories
Supplied Accessories
The following items are included with the camera:
Owner’s Manual
(this manual)
Software for FinePix CD
NP-95 rechargeable
battery
AC-5VC AC power
adapter
Attaching the Strap
Attach the strap as shown.
3 Caution
To ensure that you do not
drop the camera, wear the
strap on your wrist.
USB cable Strap
2
Introduction
Parts of the Camera
Parts of the Camera
For more information, refer to the page listed to the right of each item.
Selector button
Move cursor left
F (macro) button
(pg. 22)
Move cursor up
m (monitor brightness) button (see below)
b (delete) button (pg. 18)
Move cursor down
h (self-timer) button (pg. 25)
Move cursor right
N ( ash) button
(pg. 23)
21 F (photo mode) button .....................57
22 Speaker ...........................................................43
23 DISP (display)/BACK button ..........15, 36
24 Battery-chamber cover .......................... 4
25 Tripod mount
26 USB and A/V connector .......44, 45, 52
27 Connector for AC power adapter .... 6
28 Battery chamber .........................................4
29 Battery latch ..................................................4
30 Memory card slot .......................................8
11 2D button .......................................................19
12 Q (parallax) button .............................13
13 F/B button .............................................41
14 MODE button ................................................13
15 Monitor ............................................................. 3
16 Indicator lamp .......................................6, 17
17 MENU/OK button ......................................... 11
18 a (playback) button ....................18, 36
19 Strap eyelet .................................................... 1
20 Terminal cover ............................44, 45, 52
1 Shutter button ...........................................17
2 Zoom control .......................14, 37, 38, 42
3 Flash ..................................................................23
4 Infrared port ................................................54
5 Left lens
6 Right lens
7 Microphone .................................................41
8 On/o switch and lens cover ...........10
9 Illuminator ....................................................80
Self-timer lamp ..........................................26
10 3D button .......................................................13
2 Tip: Monitor Brightness
Pressing the
m button brie y increases monitor brightness, making the display easier to see in bright light. Nor-
mal brightness is restored when a photograph is taken.
3
Before You Begin
Introduction
Camera Displays
Camera Displays
The following indicators may appear during shooting and playback:
Shooting
Shooting
*
3D
M
10 : 00
AM
10 : 00
AM
2
2
3
3
-
1
-
1
12 / 31 / 2050
12/31/2050
ISO
800
ISO
800
N
N
9
9
4:3
F
550
02
02
* a: indicates that no memory card
is inserted and that pictures will
be stored in the camera’s internal
memory (pg. 7).
13 Self-timer indicator .................................25
14 Metering ........................................................66
15 White balance ............................................60
16 Date and time......................................11, 80
17 Number of available frames ...........104
18 G color .......................................61
19 Bright monitor indicator ........................2
20 Focus warning ...................................16, 98
21 Blur warning ........................................23, 98
22 Parallax display...........................................13
23 Internal memory indicator
*
................. 7
24 Focus frame .........................................16, 20
25 Exposure compensation .....................58
1 Image quality ..............................................60
2 Image size .....................................................59
3 Sensitivity ......................................................59
4 Continuous shooting mode .............65
5 Macro (close-up) mode........................22
6 Flash mode...................................................23
7 Silent mode .................................................16
8 Intelligent Face Detection
indicator ........................................................ 64
9 Shooting mode .........................................57
10 C/D mode indicator .....................13
11 Battery level .................................................14
12 Quick AF ................................................. 12, 67
Playback
Playback
100-0001
100-0001
3D
N
N
4:3
ISO
800
ISO
800
10 : 00
AM
10 : 00
AM
2
2
3
3
-
1
-
1
12 / 31 / 2050
12/31/2050
F
550
02
02
6 C image .....................................................18
7 Playback mode indicator ....................36
8 C/D mode indicator .....................36
9 Protected image .......................................73
10 Frame number ...........................................83
11 Parallax display...........................................13
1 Gift image .............................................36, 56
2 DPOF print indicator ..............................47
3 Red-eye removal indicator ................71
4 Intelligent Face Detection
indicator ........................................................ 64
5 Silent mode indicator ............................16
Note: The indicators actually displayed during shooting and playback vary with camera settings.
First Steps
4
Inserting the Battery
Insert the battery in the camera as described below.
1
Open the battery-chamber cover.
1 Note
Be sure the camera is o before opening the bat-
tery-chamber cover.
3 Cautions
Do not open the battery-chamber cover when
the camera is on. Failure to observe this pre-
caution could result in damage to image  les or
memory cards.
Do not use excessive force when handling the
battery-chamber cover.
2
Insert the battery.
Insert the battery with
the terminals  rst and the
arrow aligned with the ar-
row next to the battery
chamber. Slide the bat-
tery into the camera, keeping the battery
latch pressed to one side as shown below.
Con rm that the battery is securely latched.
Arrow
Battery latch
3 Caution
Insert the battery in the correct orientation. Do
NOT use force or attempt to insert the battery up-
side down or backwards. The battery will slide in
easily in the correct orientation; the camera will
not turn on if the battery is inserted incorrectly.
First Steps
5
Inserting the Batteries
3
Close the battery-chamber cover.
Removing the Battery
After turning the camera o , open the battery-cham-
ber cover, press the battery latch to the side, and slide
the battery out of the camera as shown.
Battery latch
3 Caution
Turn the camera o before removing the battery.
3 Cautions
Do not a x stickers or other objects to the battery. Failure to observe this precaution could make it impossible
to remove the battery from the camera.
Do not short the battery terminals. The battery could overheat.
Read the cautions on page v.
• Use only batteries designated for use with this camera. Failure to observe this precaution could result in product
malfunction.
Do not remove the labels from the battery or attempt to split or peel the outer casing.
The battery gradually loses its charge when not in use. Charge the battery one or two days before use.
6
Charging the Battery
The battery is not charged at shipment. Charge the battery before use.
1
Connect the AC power adapter.
Connect the supplied AC power adapter to
the camera as shown.
2 Tips: Using an AC power adapter
The AC power adapter can also be used to power the
camera. Use to prevent unexpected loss of power
during extended playback or when the camera is
connected to a computer or TV.
• If the camera is powered by an AC power adapter,
demo mode slides will be displayed when the cam-
era is turned on. Demo mode can be disabled using
the s DEMO MODE option in the setup menu (pg.
81).
2
Plug the adapter in.
Plug the AC power adapter into a power out-
let. The indicator lamp will glow red while
the battery charges (if the indicator lamp
does not light, check that the battery is cor-
rectly inserted). Charging is complete when
the lamp turns o .
Indicator lamp
The Indicator Lamp
The indicator lamp shows battery charge status as
follows:
Indicator lamp
Indicator lamp
Battery status
Battery status
On (red)
Battery charging
O Battery fully charged
Blinks (red) Battery fault
The indicator lamp also shows focus,  ash, exposure,
and recording status (pg. 17).
First Steps
7
Inserting a Memory Card
Although the camera can store pictures in internal memory, optional SD memory cards (sold sepa-
rately) can be used to store additional pictures.
When no memory card is inserted, a appears in the monitor and internal memory is used for recording
and playback. Note that because camera malfunction could cause internal memory to become cor-
rupted, the pictures in internal memory should periodically be transferred to a computer and saved on
the computer hard disk or on removable media such as CDs or DVDs. The pictures in internal memory
can also be copied to a memory card (see page 74). To prevent internal memory from becoming full,
be sure to delete pictures when they are no longer needed.
When a memory card is inserted as described below, the card will be used for recording and playback.
Compatible Memory Cards
Compatible Memory Cards
SanDisk SD and SDHC memory cards have been approved for use in the camera. A complete list
of approved memory cards is available at http://www.fujifilm.com/products/digital_cameras/index.html.
Operation is not guaranteed with other cards. The camera can not be used with xD-Picture Cards or
MultiMediaCard (MMC) devices.
3 Caution
SD memory cards can be locked, making it impossible to format the card or to record or
delete images. Before inserting an SD memory card, slide the write-protect switch to the
unlocked position.
Write-protect switch
Write-protect switch
8
Inserting a Memory Card
1
Open the battery-chamber cover.
1 Note
Be sure the camera is o
before opening the battery-
chamber cover.
2
Insert the memory card.
Holding the memory card in the orientation
shown below, slide it in until it clicks into
place.
Be sure card is in correct ori-
entation; do not insert at an
angle or use force.
3
Close the battery-chamber cover.
Removing Memory Cards
After con rming that the camera
is o , press the card in and then
release it slowly. The card can
now be removed by hand.
3 Cautions
The memory card may spring out if you remove
your  nger immediately after pushing the card in.
Memory cards may be warm to the touch after be-
ing removed from the camera. This is normal and
does not indicate a malfunction.
Inserting a Memory Card
Inserting a Memory Card
First Steps
9
Inserting a Memory Card
3 Cautions
Do not turn the camera o or remove the memory card while the memory card is being formatted or data are being recorded to or
deleted from the card. Failure to observe this precaution could damage the card.
Format memory cards before  rst use or after using them in a computer or other device. For more information
on formatting memory cards, see page 85.
• Memory cards are small and can be swallowed; keep out of reach of children. If a child swallows a memory card,
seek medical assistance immediately.
miniSD or microSD adapters that are larger or smaller than the standard dimensions of an SD card may not eject
normally; if the card does not eject, take the camera to an authorized service representative. Do not forcibly
remove the card.
Do not a x labels to memory cards. Peeling labels can cause camera malfunction.
Movie recording may be interrupted with some types of SD memory card. Use a card with a class 4 write speed
(4 MB/s) or better when shooting movies.
The data in internal memory may be erased or corrupted when the camera is repaired. Please note that the
repairer will be able to view pictures in internal memory.
Formatting a memory card or internal memory in the camera creates a folder in which pictures are stored. Do
not rename or delete this folder or use a computer or other device to edit, delete, or rename image  les. Always
use the camera to delete pictures from memory cards and internal memory; before editing or renaming  les,
copy them to a computer and edit or rename the copies, not the originals.
10
Turning the Camera on and O
Shooting Mode
Shooting Mode
To turn the camera on, open the lens cover as
shown below. The camera turns o when the
lens cover is closed.
Camera on Camera o
2 Tip: Switching to Playback Mode
Press the a button for about a second to start play-
back. Press the shutter button halfway to return to
shooting mode.
3 Caution
Pictures can be a ected by  ngerprints and other
marks on the lenses. Keep the lenses clean.
Playback Mode
Playback Mode
To turn the camera on and begin playback with-
out opening the lens cover, press the a button
for about a second.
To turn the camera o , open and close the lens
cover.
2 Tip: Switching to Shooting Mode
To exit to shooting mode, press the shutter button
halfway. Press the a button to return to playback.
2 Tip: Auto Power O
The camera will turn o automatically if no operations are performed for the length of time selected in the
M AUTO POWER OFF menu (pg. 85; note that OFF is not available when p QUICK AF is selected for
S POWER MANAGEMENT). To turn the camera on, close and reopen the lens cover or press the a button for
about a second.
First Steps
11
Basic Setup
A language-selection dialog is displayed the  rst time the camera is turned on. Set up the camera as
described below (for information on resetting the clock or changing languages, see page 80).
1
Choose a language.
SET
NO
START MENU
1.1 Press the selector up, down,
left, or right to highlight a lan-
guage.
1.2 Press MENU/OK.
2
Set the date and time.
SET NO
DATE / TIME NOT SET
2011
2010
2008
2007
1. 1 12
:
00
AM
2009
YY
.
MM
.
DD
2.1 Press the selector left or right to
highlight the year, month, day,
hour, or minute and press up
or down to change. To change
the order in which the year,
month, and day are displayed, highlight
the date format and press the selector up
or down.
2.2 Press MENU/OK.
12
Basic Setup
3
Choose power management options.
SET NO
POWER MANAGEMENT
POWER SAVE
Power saving for longer
battery life
QUICK AF
3.1 Press the selector up or down
to highlight one of the follow-
ing options:
n POWER SAVE: Save battery
power.
p QUICK AF:
Reduce focusing time, en-
suring a quick shutter response
.
3.2 Press MENU/OK.
2 Tip: The Camera Clock
If the battery is removed for an extended period, the
camera clock will be reset and the language-selection
dialog will be displayed when the camera is turned
on. If the battery is left in the camera for about two
hours, the battery can be removed for about six hours
without resetting clock, language selection, or power
management options.
13
Basic Photography and Playback
1
Turn the camera on.
Fully open the lens cover.
2
Select A mode.
Press the MODE button to
display the mode selec-
tion menu.
Press the selector up or
down to highlight A
and press MENU/OK.
AUTO
Automatic mode
setting according to
shooting conditions.
AUTO
3
Select C.
Press the 3D button. C
will be displayed in the
monitor.
AUTO
3D
Parallax (pg. 103)
The appearance of
C images
can be adjusted using the Q (R
and S) buttons. The percent-
age is displayed in the monitor.
Press the shutter button to take
a picture at the current setting,
or press the 3D button to reset parallax.
Note that adjusting parallax re-
duces horizontal frame cover-
age. The new crop is shown by
black borders in the display.
AUTO
3D
04
04
2 Tip: Auto Parallax
For automatic parallax adjustment, select ON for
i AUTO PARALLAX CONTROL (pg. 63). Parallax
can still be adjusted manually when ON is selected.
3 Caution: Excessive Parallax
Too much parallax may make it impossible to per-
ceive the 3D e ect.
AUTO
3D
02
02
Taking C Pictures in Auto Mode
This section describes how to take C pictures in A mode.
14
Taking C Pictures in Auto Mode
4
Check the battery level.
Check the battery level in the display.
qwe
AUTO
3D
r
Indicator
Indicator
Description
Description
D
(white)
Battery partially discharged.
C
(white)
Battery more than half discharged.
B
(red)
Low battery. Charge as soon as pos-
sible.
A
(blinks red)
Battery exhausted. Turn camera o
and charge battery.
5
Frame the picture.
Position the main subject in the focus frame
and use the zoom control to frame the pic-
ture in the display.
1 Note: C
The C e ect may not be
visible at high zoom ratios,
in subjects that are outside
the suggested range (pg.
105), poorly lit or at the edge
of the frame, or if the display
is viewed from the side.
AUTO AUTO
Select T to zoom inSelect W to zoom out
Zoom indicator
2 Tip: Focus Lock
Use focus lock (pg. 20) to focus on subjects that are not in the focus frame.
15
Basic Photography and Playback
Taking C Pictures in Auto Mode
Holding the Camera
Hold the camera steady with
both hands and brace your
elbows against your sides.
Shaking or unsteady hands
can blur your shots.
To avoid interfering with the C e ect and to pre-
vent pictures that are out of focus or too dark (under-
exposed), keep your  ngers and other objects well
away from the lenses and  ash. Note that the C
e ect may not be visible if the display is viewed at
an angle.
Shooting Information
To choose the shooting information and guides dis-
played, press the DISP/BACK button.
Indicators displayed Indicators hidden
AUTO
3D
AUTO
3D
Best framing
Hiding indicators makes it easier to see the C e ect.
To use best framing, position the main subject at the
intersection of two lines or align one of the horizon-
tal lines with the horizon. Use focus lock (pg. 20) to
focus on subjects that will not be in the center of the
frame in the  nal photograph.
16
Taking C Pictures in Auto Mode
h Silent Mode
In situations in which camera sounds or lights may
be unwelcome, hold the DISP/BACK button down until
h is displayed.
AUTO
3D
The speaker,  ash, illuminator, and self-timer lamp
turn o and  ash and volume settings can not be
adjusted (note that the  ash will still  re when C
is selected in SP mode). To restore normal operation,
press the DISP/BACK button until the h icon is no lon-
ger displayed.
6
Focus.
Press the shutter button halfway to focus on
the main subject in the focus frame.
AUTO
3D
Press
halfway
Focus frame Camera selects small focus
frame and focuses on subject
1 Note
The lenses may make a noise when the camera
focuses. This is normal.
If the camera is able to focus with both lenses, it
will beep twice and the indicator lamp will
glow green.
If the camera is unable to focus, the focus frame
will turn red, s will be displayed, and the
indicator lamp will blink green. Change the
composition or use focus lock (pg. 20).
17
Basic Photography and Playback
Taking C Pictures in Auto Mode
7
Shoot.
Smoothly press the shutter button
the rest of the way down to take
the picture.
2 Tip: The Shutter Button
The shutter button has two positions. Pressing the
shutter button halfway (
q
) sets focus and exposure;
to shoot, press the shutter button the rest of the way
down (
w
).
qw
Press halfway
Press the rest of
the way down
Double
beep
Click
1 Note
If the subject is poorly lit, the  ash may  re when the
picture is taken. For information on using the  ash
when lighting is poor, see page 23.
The Indicator Lamp
Indicator lamp
The indicator lamp shows camera status as follows
(see page 6 for information on the charging display):
Indicator lamp
Indicator lamp
Camera status
Camera status
Glows green Focus locked.
Blinks green
Blur, focus, or exposure warning. Pic-
ture can be taken.
Blinks green
and orange
Recording pictures. Additional pic-
tures can be taken.
Glows orange
Recording pictures. No additional
pictures can be taken at this time.
Blinks orange
Flash charging;  ash will not  re when
picture is taken.
Blinks red
Lens or memory error (internal mem-
ory or memory card full or not format-
ted, format error, or other memory
error).
2 Tip: Warnings
Detailed warnings appear in the display. See pages
98101 for more information.
18
Viewing C Pictures
Pictures can be viewed in the monitor. When taking important photographs, take a test shot and
check the results. C pictures are stored in multi-picture (“.mpo”) format; JPEG copies can be recorded
by selecting MPO+JPEG for the o 3DREC option in the setup menu.
1
Press the a button.
The most recent picture
will be displayed in the
monitor. Pictures taken
in
C are indicated by a
g icon.
3D
100-0001
100-0001
2
Press the 3D button.
Press the 3D button to
view C pictures in C
(D pictures will still be
displayed in D).
3
View additional pictures.
Press the selector right to
view pictures in the order
recorded, left to view pic-
tures in reverse order.
Press the shutter button to exit to shooting
mode.
Deleting Pictures
To delete the picture currently displayed
in the monitor, press the selector up (
b).
The following dialog will be displayed.
SET
ERASE OK?
OK CANCEL
To delete the picture, press the selector
left to highlight OK and press MENU/OK.
To exit without deleting the picture, high-
light CANCEL and press MENU/OK.
2 Tip: The Playback Menu
Pictures can also be deleted from the playback menu
(pg. 39).
19
Basic Photography and Playback
Shooting and Viewing D Pictures
Taking Pictures in
Taking Pictures in
D
D
To shoot pictures in D, press the 2D
button in shooting mode and take pic-
tures as described on pages 1317. D
is displayed in the monitor and photographs are
taken using the left lens and saved in JPEG (“.jpg”)
format (Exif 2.2).
AUTO
2D
Note that the picture angle of photographs taken
in D di ers from that of C images.
Viewing Pictures in
Viewing Pictures in
D
D
To view pictures in D, press the 2D
button in playback mode and view
pictures as described on page 18. Note
that when C pictures are viewed in D, only
the image recorded with the left lens will be dis-
played.
2D
100-0001
100-0001
Images that were originally recorded in D are
indicated by the absence of a g icon.
20
More on Photography
Focus Lock CD
To compose photographs with o -center subjects:
1
Position the subject in the focus frame.
AUTO
3D
2
Focus.
Press the shutter button halfway to set focus
and exposure. Focus and exposure (and in
C mode, parallax; pg. 13) will remain locked
while the shutter button is pressed halfway
(AF/AE lock).
Press
halfway
Repeat steps 1 and 2 as desired to refocus
before taking the picture.
3
Recompose the picture.
Keeping the shutter button pressed halfway,
recompose the picture.
4
Shoot.
Press the shutter-release button the rest of
the way down to take the picture.
Press the rest of
the way down
21
More on Photography
Focus Lock
Autofocus
Although the camera boasts a high-precision autofocus system, it may be unable to focus on the subjects listed
below. If the camera is unable to focus using autofocus, use focus lock (pg. 20) to focus on another subject at
the same distance and then recompose the photograph.
Very shiny subjects such as mir-
rors or car bodies.
• Fast-moving subjects.
Subjects photographed through a window or other re ective object.
Dark subjects and subjects that absorb rather than re ect light, such as hair or fur.
Insubstantial subjects, such as smoke or  ame.
Subjects that show little contrast with the background (for example, subjects in clothing that is the same color
as the background).
Subjects positioned in front of or behind a high-contrast object that is also in the focus frame (for example, a
subject photographed against a backdrop of highly contrasting elements).
Auto Parallax
Although the camera boasts highly precise parallax control, auto parallax may not produce the desired results
with the subjects listed under “Autofocus” (above) or with subjects outside the recommended range (particu-
larly if the subject is close to the camera), repeating rectangular patterns such as venetian blinds or the windows
in an o ce building, or straight lines such as poles or wires. Use focus lock (pg. 20) or adjust parallax manually
(pg. 13).
22
F Macro Mode (Close-ups) D
For close-ups, press the selector left (F).
AUTO
2D
F is displayed in macro mode.
When macro mode is in e ect, the camera focuses on subjects near the center of the frame. Use the
zoom control to compose pictures (pg. 14).
To exit macro mode, press the selector left (F).
1 Notes
Use of a tripod is recommended to prevent blur caused by camera shake.
The  ash may fail to light the entire subject at very short ranges. Increase the distance to the subject and try
again.
Macro mode is not available in twin camera mode (pg. 31). It is not available during C shooting except in
A mode (pg. 33).
23
More on Photography
N Using the Flash (Super Intelligent Flash) CD
When the  ash is used, the cameras Super Intelligent Flash system instantly analyzes the scene based
on such factors as the brightness of the subject, its position in the frame, and its distance from the
camera. Flash output and sensitivity are adjusted to ensure that the main subject is correctly exposed
while preserving the e ects of ambient background lighting, even in dimly-lit indoor scenes. Use the
ash when lighting is poor, for example when shooting at night or indoors under low light.
1
Choose a  ash mode.
Press the selector right (N). The  ash mode changes each time the
selector is pressed; in modes other than A, the current mode is indi-
cated by an icon in the display. Choose from the following options:
Mode
Mode
Description
Description
A (auto)
The  ash  res when required. Recommended in most situations.
K (auto with
red-eye reduction)
As above, except that camera minimizes “red-eye” caused when light from the  ash
is re ected from the subject’s retinas. Available in C only.
N ( ll ash)
The  ash  res whenever a picture is taken. Use for backlit subjects or for natural
coloration when shooting in bright light.
P (o )
The ash does not re even when the subject is poorly lit. k will appear in the
monitor at slow shutter speeds to warn that pictures may be blurred. Use of a
tripod is recommended.
O (slow sync)
Capture both the main subject and the background under low light (note that
brightly lit scenes may be overexposed).
M (slow sync with
red-eye reduction)
As for slow sync, except that camera minimizes “red-eye.” Available in C only.
24
N Using the Flash (Super Intelligent Flash)
2
Focus.
Press the shutter button halfway to focus. If the  ash will  re, p will be displayed when
the shutter button is pressed halfway. At slow shutter speeds, k will appear in the
display to warn that pictures may be blurred; use of a tripod is recommended.
3
Shoot.
Press the shutter button the rest of the way down to shoot.
3 Caution
The  ash may  re several times with each shot. Do not move the camera until shooting is com-
plete.
Red-Eye Removal (D)
When g ON J ON is selected for Intelligent Face Detection (D only; pg. 64), red-eye removal
(J) is available in auto (K),  ll  ash (L), and slow sync (M) modes. Red-eye removal minimizes
red-eye” caused when light from the  ash is re ected from the subjects retinas as shown in the
illustration at right.
25
More on Photography
h Using the Self-Timer CD
The camera o ers a ten-second timer that allows photographers to appear in their own photographs,
and a two-second timer that can be used to avoid blur caused by the camera moving when the shutter
button is pressed. The self-timer is available in all shooting modes.
1
Set the timer.
The current self-timer mode is displayed in the monitor. To choose a di erent setting, press the
selector down (h). The selection changes each time the selector is pressed.
AUTO
3D
Choose from T (self-timer o ),
S (10 s delay), or R (2 s delay)
2
Focus.
Press the shutter button halfway to focus.
3 Caution
Stand behind the camera when using the shutter button. Standing in front
of the lens can interfere with focus and exposure.
3
Start the timer.
Press the shutter button the rest of the way down to start the timer.
The display in the monitor shows the number of seconds remaining
until the shutter is released. To stop the timer before the picture is
taken, press DISP/BACK.
9
9
26
h Using the Self-Timer
The self-timer lamp on the front of the camera will blink
immediately before the picture is taken. If the two-sec-
ond timer is selected, the self-timer lamp will blink as the
timer counts down.
Intelligent Face Detection (D)
Because it ensures that the faces of portrait subjects will be in focus, Intelligent Face Detection (pg. 64) is recom-
mended when using the self-timer for group portraits or self-portraits. To use the self-timer with Intelligent Face
Detection, turn Intelligent Face Detection on, set the timer as described in Step 1, and then press the shutter
button all the way down to start the timer. The camera will detect faces while the timer is counting down and
adjust focus and exposure immediately before the shutter is released. Be careful not to move until the picture
has been recorded.
1 Note
The self-timer turns o automatically when the picture is taken, a di erent shooting mode is selected, playback
mode is selected, or the camera is turned o .
27
More on Photography
B
B
AUTO
AUTO
Choose for crisp, clear snapshots (pg. 13). This
mode is recommended in most situations.
SP
SP
SCENE POSITION
SCENE POSITION
The camera o ers a choice of
“scenes,” each adapted to par-
ticular shooting conditions or a
speci c type of subject. Select-
ing SP in the mode selection
menu displays the options listed on the following
page; press the selector up or down to highlight
the desired scene and press MENU/OK.
SET CANCEL
Portrait with soft
overall tone and
beautiful skin tones
PORTRAIT
LANDSCAPE
NATURAL LIGHT
NATURAL &
SET CANCEL
Portrait with soft
overall tone and
beautiful skin tones
PORTRAIT
LANDSCAPE
NATURAL LIGHT
NATURAL &
Shooting Mode CD
Choose a shooting mode according to the scene or type of subject. To select a
shooting mode, press the MODE button to display the mode selection menu. Press
the selector up or down to highlight the desired mode and press MENU/OK. The
selected mode will be shown at the top left corner of the display. The following
options are available:
AUTO
Automatic mode
setting according to
shooting conditions.
AUTO
28
Shooting Mode
Scene
Scene
Description
Description
C NATURAL & N
Get good results with backlit subjects and other di cult lighting. The camera takes two shots: one without
the  ash and one with.
D NATURAL LIGHT
Capture natural light indoors, under low light, or where the  ash can not be used. The  ash turns o and
sensitivity is raised to reduce blur.
L PORTRAIT Choose for soft-toned portraits with natural skin tones.
M LANDSCAPE Choose for crisp, clear daylight shots of buildings and landscapes.
N SPORT
Choose when photographing moving subjects. p QUICK AF is automatically selected for S POWER
MANAGEMENT and priority is given to faster shutter speeds.
O NIGHT
Choose this mode for poorly lit twilight or night scenes. Sensitivity is automatically raised to reduce blur
caused by camera shake.
H NIGHT (TRIPOD) Choose this mode for slow shutter speeds when shooting at night. Use a tripod to prevent blur.
Q SUNSET Record the vivid colors in sunrises and sunsets.
R SNOW Choose for crisp, clear shots that capture the brightness of scenes dominated by shining white snow.
S BEACH Choose for crisp, clear shots that capture the brightness of sunlit beaches.
F UNDERWATER Choose for vivid blues when taking photographs of subjects in an aquarium.
U PARTY Capture indoor background lighting under low-light conditions.
E ANTI-BLUR
Choose E ANTI-BLUR (picture stabilization) mode for fast shutter speeds that reduce blur caused by
camera shake or subject movement. Recommended for photographs of children and pets.
29
More on Photography
Shooting Mode
1
Press the F button to display the
F-mode menu.
2
Press the selector up or down to
highlight d SET SHUTTERSPEED,
APERTURE..
MODE MENU
ISO
WHITE BALANCE
400
N
AUTO
STD
4:3
SET SHUTTERSPEED,APERTURE.
IMAGE SIZE
IMAGE QUALITY
COLOR
3
Press MENU/OK. Shutter speed and
aperture will be displayed.
F
550
3D
M
SET
Shutter speed
Aperture
4
Press the selector up or down to
choose the aperture, left or right to
choose the shutter speed.
5
Press MENU/OK to return to shooting
mode.
6
Take pictures.
The Exposure Indicator
The amount the picture will be
under- or over-exposed at cur-
rent settings is shown by the ex-
posure indicator.
F
550
3D
M
SET
M
M
MANUAL
MANUAL
In this mode, you choose both shutter speed and aperture. If desired, exposure can be altered from
the value suggested by the camera.
30
Shooting Mode
A
A
APERTURE PRIORITY AE
APERTURE PRIORITY AE
In this mode, you choose the aperture while the camera adjusts shutter speed for optimal exposure.
1
Press the F button to display the
F-mode menu.
2
Press the selector up or down to
highlight d SETTING APERTURE.
MODE MENU
ISO
WHITE BALANCE
400
N
AUTO
STD
4:3
SETTING APERTURE
IMAGE SIZE
IMAGE QUALITY
COLOR
3
Press MENU/OK. Exposure compensa-
tion and aperture will be displayed.
0
F
5
3D
A
SET
Exposure compensation
Aperture
4
Press the selector up or down to
choose exposure compensation, left
or right to choose the aperture.
5
Press MENU/OK to return to shooting
mode.
6
Take pictures. If the correct exposure can not
be achieved at the selected aperture, shutter
speed will be displayed in red when the shut-
ter button is pressed halfway. Adjust aperture
until the correct exposure is achieved.
3 Caution
If the subject is outside the metering range of the cam-
era, the shutter speed display will show “---”. Press the
shutter button halfway to measure exposure again.
31
More on Photography
Shooting Mode
P
P
PROGRAM AE
PROGRAM AE
In this mode, the camera sets aperture and shut-
ter speed automatically. Exposure can be adjust-
ed using the d EXP. COMPENSATION option in
the F-mode menu.
3 Caution
If the subject is outside the metering range of the cam-
era, the shutter speed and aperture displays will show
“---”. Press the shutter button halfway to measure ex-
posure again.
B
B
TWIN CAMERA
TWIN CAMERA
The camera simultaneously
takes two D pictures—one
with each lens—with di er-
ent options selected for each.
Selecting B in the mode
selection menu displays the following options;
press the selector up or down to highlight an op-
tion and press MENU/OK.
V TELE/WIDE: Zoom for the left lens can be ad-
justed using the zoom control. The right lens is
zoomed all the way out (pg. 32).
X 2-COLOR: The two pictures use di erent set-
tings for G color (pg. 32).
W 2-SENSITIVITY: The camera sets sensitivity sep-
arately for each lens (pg. 32).
3 Caution: B Mode
In B mode, the camera dis-
plays the view through the left lens
only. Be careful not to obstruct the
right lens during shooting.
SET CANCEL
Simultaneous
2
shots
with wide-edge angle
and free-zooming angle
2
-COLOR
2
-SENSITIVITY
TELE/WIDE
SET CANCEL
Simultaneous
2
shots
with wide-edge angle
and free-zooming angle
2
-COLOR
2
-SENSITIVITY
TELE/WIDE
32
Shooting Mode
V
V
TELE/WIDE
TELE/WIDE
Zoom for the left lens can be
adjusted using the zoom con-
trol. The right lens is zoomed
all the way out.
X
X
2-COLOR
2-COLOR
Select the desired combina-
tion of color options using the
j 2-COLOR SETTING option
in the shooting menu (pg. 63).
2
-COLOR SETTING
STANDARD + CHROME
The selected combination is
shown by an icon in the display.
2D
W
W
2-SENSITIVITY
2-SENSITIVITY
If lighting permits, sensitivity is set higher for the
right lens than for the left (the maximum value for
the left lens is ISO 400, that for the right lens ISO
1600; note that the same value may be used for
both lenses if the subject is brightly lit).
Sensitivity
Sensitivity
Lighting
Lighting
Left lens
Left lens
Right lens
Right lens
Dark ISO 400 ISO 1600
ISO 100 ISO 400
Bright ISO 100 ISO 100
Higher sensitivities permit faster shutter speeds.
If you pan the camera to follow a moving object,
the background in the shot taken with the right
lens will be less blurred than in the shot taken
with the left, producing di erent speed e ects. If
lighting is poor, the shot taken with the right lens
will be less blurred, while the shot taken with the
left lens will have less noise.
33
More on Photography
Shooting Mode
A
A
ADVANCED 3D
ADVANCED 3D
This mode o ers greater C exibility than A mode. The camera takes two
shots with the left lens and combines them to form a C picture. Selecting A
in the mode selection menu displays the options listed below; press the selector up
or down to highlight an option and press MENU/OK.
B INTERVAL 3D SHOOTING: The camera automatically takes the two shots at a  xed
interval (pg. 35).
A INDIVID. SHUTTER 3D: One shot is taken each time you press the shutter button (pg. 34).
SET CANCEL
3
D image from
2
consecutive shots
with input interval
INDIVID. SHUTTER
3
D
INTERVAL
3
D SHOOTING
SET CANCEL
3
D image from
2
consecutive shots
with input interval
INDIVID. SHUTTER
3
D
INTERVAL
3
D SHOOTING
34
Shooting Mode
Use this option to combine two shots taken from
di erent angles to create a C picture. Use in
macro mode, to create C pictures of distant ob-
ject, and in other situations in which the desired
results can not be achieved in
A mode.
1
Choose the order in which the shots will be
taken (left  rst or right  rst) using the l TURN
option in the shooting menu (pg. 63).
SHOOTING MODE
POWER MANAGEMENT
SET-UP
TURN
SHOOTING MENU
3D
First shot shown by E
2
Take the  rst shot.
1 Note
To exit without taking the second shot, press DISP/
BACK or turn the camera o . Note that the camera
will turn o and shooting will be cancelled if no
operations are performed for the length of time se-
lected for M AUTO POWER OFF (pg. 85).
3
The  rst shot will be superimposed on the
view through the lens. Using the  rst shot as
a guide, reposition the camera and take the
second shot to create a C picture. Note that
the 3D e ect may not be visible if the paral-
lax between the two positions is too great; the
best results will be achieved if the distance the
camera is moved between the two shots is
between
1
/
30
th
and
1
/
50
th
of the distance to the
subject.
A
A
INDIVID. SHUTTER 3D
INDIVID. SHUTTER 3D
35
More on Photography
Shooting Mode
B
B
INTERVAL 3D SHOOTING
INTERVAL 3D SHOOTING
Use this option to take C pictures of distant ob-
jects from a moving vehicle.
1
Select the delay between the two shots us-
ing the k 3D INTERVAL TIME option in the
shooting menu (pg. 63). Choose shorter de-
lays for less distant objects or faster-moving
vehicles (the best results will be achieved if the
distance the camera moves between the two
shots is between
1
/
30
th
and
1
/
50
th
of the distance
to the subject). The 3D e ect may not be vis-
ible if the parallax between the two shots is
too great or if another object is between the
camera and your subject.
SHOOTING MENU
SHOOTING MODE
POWER MANAGEMENT
SET-UP
3
D INTERVAL TIME
TURN
1.0
SHOOTING MENU
MINIMUM
1.0
SEC
1.5
SEC
2.0
SEC
3.0
SEC
5.0
SEC
1 0
SEC
3D
MIN.
2
Choose the order in which the shots will be
taken (left  rst or right  rst) using the l TURN
option in the shooting menu (pg. 63). Choose
the order that matches the direction of mo-
tion.
SHOOTING MODE
POWER MANAGEMENT
SET-UP
3
D INTERVAL TIME
TURN
MIN.
SHOOTING MENU
MIN.
3D
First shot shown by E
3
Take the  rst shot. A timer
is displayed after the  rst
shot; the second shot is tak-
en when the timer reaches
zero. No operations can
be performed while the timer is active; if the
camera is turned o before the second shot is
taken, no picture will be recorded.
3
3
3
3
36
More on Playback
Playback Options
To view the most recent picture in the monitor,
press the a button.
3D
100-0001
100-0001
Press the selector right to view pictures
in the order recorded, left to view pic-
tures in reverse order. Keep the selector
pressed to scroll rapidly to the desired
frame.
Switching Between C and D
Press the 2D button to view C
pictures in D, the 3D button to
view C pictures in C (D
pictures are always displayed in
D). In C playback, press the
R and S buttons to adjust parallax.
3D
100-0001
100-0001
Choosing a Display Format
Press the DISP/BACK button to cycle through playback
display formats as shown below.
Indicators displayed Indicators hidden
3D
100-0001
100-0001
2050
2/13
2/13
12 / 31
Sort by date
Hide indicators for improved C viewing.
1 Note
Pictures taken using other cameras are indicated by a m (“gift image”) icon during playback.
37
More on Playback
Playback Options
Playback Zoom
Playback Zoom
Select T to zoom in on pictures displayed in sin-
gle-frame playback; select W to zoom out. When
the picture is zoomed in, the selector can be used
to view areas of the image not currently visible in
the display.
Zoom indicator
Navigation window shows
portion of image currently
displayed in monitor
Press DISP/BACK to exit zoom.
1 Note
Playback zoom is not available with cropped copies
saved at a size of a or copies created with O RE-
SIZE (pg. 77).
3 Caution: C Playback
C pictures are best viewed with the camera held
horizontally. The 3D e ect may not be visible at high
zoom ratios or when the monitor is viewed at an angle.
If C pictures appear blurred even after parallax is ad-
justed, select D playback.
Intelligent Face Detection (D Only)
Pictures taken with Intelligent
Face Detection (pg. 64) are in-
dicated by a g icon. Press the
R button to zoom in on the
subject selected with Intelligent
Face Detection. You can then
use the zoom control to zoom in and out.
BACKFACE ZOOM
38
Playback Options
s
s
Multi-Frame Playback
Multi-Frame Playback
To change the number of images dis-
played, select s (W) when a picture is
shown full-frame in the monitor.
Select s (W) to increase the number
of pictures displayed to  ve, nine, or a
hundred.
100-0001
3D
Select
T
to reduce the number of im-
ages displayed.
Use the selector to highlight images and press
MENU/OK to view the highlighted image full frame.
In the nine- and hundred-frame displays, press
the selector up or down to view more pictures.
Sort by Date
Sort by Date
Choose sort-by-date mode to view pictures taken
on a selected date.
1
Press DISP/BACK until the sort-by-date
screen is displayed.
2050
2/13
2/13
12 / 31
2
Use the selector up or down to
highlight a date. Keep the selector
pressed to scroll rapidly to the de-
sired date.
3
Press the selector left or right to
scroll through the pictures taken
on the highlighted date. Keep the
selector pressed to scroll rapidly to
the desired frame.
39
More on Playback
A Deleting Pictures
The A ERASE option in the playback menu can be used to delete still pictures and movies, increasing
the amount of space available on the memory card or in internal memory (for information on deleting
pictures in single-frame playback, see page 18). Note that deleted pictures can not be recovered. Copy
important pictures to a computer or other storage device before proceeding.
1
Press MENU/OK to display the play-
back menu.
2
Press the selector up or down to
highlight A ERASE.
PLAYBACK MENU
PARALLAX CONTROL
IMAGE ROTATE
RED EYE REMOVAL
PROTECT
COPY
ERASE
3
Press the selector right to display de-
lete options.
PLAYBACK MENU
PARALLAX CONTROL
IMAGE ROTATE
RED EYE REMOVAL
PROTECT
COPY
ERASE
FRAME
ALL FRAMES
BACK
4
Press the selector up or down to
highlight FRAME or ALL FRAMES.
5
Press MENU/OK to display options for
the selected item (pg. 40).
2 Tips: Deleting Pictures
When a memory card is inserted, pictures will be de-
leted from the memory card; otherwise, pictures will
be deleted from internal memory.
Protected pictures can not be deleted. Remove pro-
tection from any pictures you wish to delete (pg. 73).
• If a message appears stating that the selected images
are part of a DPOF print order, press MENU/OK to delete
the pictures.
40
A Deleting Pictures
FRAME
FRAME
: Deleting Selected Images
: Deleting Selected Images
Selecting FRAME displays the
dialog shown at right.
YES CANCEL
ERASE OK?
Press the selector left or right
to scroll through pictures and
press MENU/OK to delete the
current picture (the picture is
deleted immediately; be care-
ful not delete the wrong pic-
ture).
Press DISP/BACK to exit when all the desired pic-
tures have been deleted.
ALL FRAMES
ALL FRAMES
: Deleting All Images
: Deleting All Images
Selecting ALL FRAMES dis-
plays the con rmation shown
at right.
ERASE ALL OK?
IT MAY TAKE A WHILE
SET
OK CANCEL
Highlight OK and press MENU/
OK to delete all unprotected
pictures.
The dialog shown at right is dis-
played during deletion. Press
DISP/BACK to cancel before all
pictures have been deleted
(any pictures deleted before
the button was pressed can not be recovered).
CANCELCANCEL
41
Movies
1
Press the F/B button.
3D
STANDBY
STANDBY
12
s
12
s
Display shows
time available
2
Press 3D to record movies in
C, 2D to record movies in
D. The current mode is
shown in the monitor.
3D
STANDBY
STANDBY
12
s
12
s
1 Auto Parallax
If ON is selected for i AUTO PARALLAX CON-
TROL (pg. 63), parallax will be adjusted automati-
cally when the shutter button is pressed halfway.
If OFF is selected, adjust parallax manually before
recording begins (pg. 13).
Choosing the Frame Size
To choose the frame size when
recording movies to a memory
card, press the
F button and
select O QUALITY. Choose
a (640 × 480 pixels) for better
quality, b (320 × 240 pixels) for longer movies (if no
memory card is inserted, movies will be recorded at a
frame size of b). Press MENU/OK to return to movie
recording mode.
MODE MENU
QUALITY
1
m
25
s
43
s
F Recording Movies
Shoot short movies. C movies are recorded in 3D movie format (pg. 102), D movies in motion JPEG
format with stereo sound recorded via the built-in microphone (be careful not to cover the micro-
phone during recording).
42
F Recording Movies
3
Frame the scene using the zoom control.
STANDBY
STANDBY
12
s
12
s
Zoom indicator
Zoom can not be adjusted once recording
begins.
4
Press the shutter button all the way down to
start recording.
3D
12
s
12
s
REC
z REC and time
remaining are
displayed
2 Tip
There is no need to keep the shutter button pressed
during recording.
1 Note
Focus is set when recording begins; exposure and
white balance are adjusted automatically through-
out recording. The color and brightness of the im-
age may vary from that displayed before recording
begins.
5
Press the shutter button halfway to end record-
ing. Recording ends automatically when the
movie reaches maximum length or memory is
full.
3 Caution
The indicator lamp lights while movies are being re-
corded. Do not open the battery chamber cover dur-
ing shooting or while the indicator lamp is lit. Failure to
observe this precaution could prevent the movie from
being played back.
43
Movies
a Viewing Movies
During playback, movies are
displayed in the monitor as
shown at right. The following
operations can be performed
while a movie is displayed:
PLAY
100-006
100-006
3D
Operation
Operation
Description
Description
Start/pause
playback
Press the selector down to start playback.
Press again to pause.
End
playback/
delete
Press the selector up to end playback. If
playback is not in progress, pressing the
selector up will delete the current movie.
Advance/
rewind
Press the selector right to advance, left to
rewind. If playback is paused, the movie
will advance or rewind one frame each
time the selector is pressed.
Adjust
volume
Press MENU/OK to pause playback and dis-
play volume controls. Press the selector
up or down to adjust the volume; press
MENU/OK again to resume playback.
Progress is shown in the monitor during play-
back.
15
s
15
s
STOP PAUSE
Progress bar
2 Tip: Viewing Movies on a Computer
Copy movies to the computer before viewing.
3 Cautions
Do not cover the speaker during playback.
• Vertical or horizontal streaks may appear in movies
containing very bright subjects. This is normal and
does not indicate a malfunction.
44
Connections
Viewing Pictures on TV
Connect the camera to a TV and tune the television to the video channel to show pictures to a group.
The optional A/V cable connects as shown below. Turn the camera o before connecting the cable.
Connect yellow plug
to video-in jack
Connect white plug
to audio-in jack
Insert into A/V cable
connector
Press a for about a second to turn the camera on. The camera monitor turns o and pictures are
played back on the TV, with C images displayed in D. Note that the camera volume controls have
no e ect on sounds played on the TV; use the television volume controls to adjust the volume.
1 Note
Image quality drops during movie playback.
3 Caution
When connecting the cable, be sure the connectors are fully inserted.
45
Connections
Printing Pictures via USB (D Only)
If the printer supports PictBridge, the camera can be connected directly to the printer and
pictures can be printed without  rst being copied to a computer. Note that depending on the
printer, not all the functions described below may be supported.
Printing in C
C pictures in MPO format can not be printed via direct USB connection, although JPEG copies created when
MPO+JPEG is selected for o 3DREC can be printed in D (pg. 84). For information on C prints, visit http://
fujifilm.com/3d/print/.
Connecting the Camera
Connecting the Camera
1
Connect the supplied USB cable as shown and
turn the printer on.
2
Press the a button for about a second to turn
the camera on. t USB will be displayed in
the monitor, followed by the PictBridge display
shown below at right.
USB
00
PICTBRIDGE
OK SET
FRAME
TOTAL:
00000
SHEETS
1 Notes
Print pictures from internal memory or a memory card that has been formatted in the camera.
Default printer page size and print quality settings are used when printing via direct USB connection.
46
Printing Pictures via USB (D Only)
Printing Selected Pictures
Printing Selected Pictures
1
Press the selector left or right to dis-
play a picture you wish to print.
1 Note
To print one copy of the current picture, proceed
directly to Step 3.
2
Press the selector up or down to
choose the number of copies (up to
99). Repeat steps 12 to select addi-
tional pictures.
3
Press MENU/OK to display a con rma-
tion dialog.
YES CANCEL
PRINT THESE FRAMES
TOTAL:
9
SHEETS
4
Press MENU/OK to start printing.
2 Tip: Printing the Date of Recording
To print the date of recording on pictures, press DISP/
BACK in steps 12 to display the PictBridge menu (see
“Printing the DPOF Print Order,” below). Press the se-
lector up or down to highlight PRINT WITH DATE s
and press MENU/OK to return to the PictBridge display
(to print pictures without the date of recording, select
PRINT WITHOUT DATE). To ensure that the date is cor-
rect, set the camera clock before taking pictures. Note
that the PRINT WITH DATE s option is only available
with printers that support date printing.
During Printing
The message shown at right is
displayed during printing. Press
DISP/BACK to cancel before all
pictures are printed (depending
on the printer, printing may end
before the current picture has printed).
If printing is interrupted, press a to turn the camera
o and then on again.
CANCEL
PRINTING
Disconnecting the Camera
Con rm that the above message is not displayed and
turn the camera o . Disconnect the USB cable.
47
Connections
Printing Pictures via USB (D Only)
Printing the DPOF Print Order
Printing the DPOF Print Order
To print the print order created with K PRINT
ORDER (DPOF) in the playback F-mode menu
(pg. 69):
1
In the PictBridge display, press DISP/
BACK to open the PictBridge menu.
2
Press the selector up or down to
highlight u PRINT DPOF.
PICTBRIDGE
PRINT DPOF
PRINT WITH DATE
PRINT WITHOUT DATE
3
Press MENU/OK to display a con rma-
tion dialog.
YES CANCEL
PRINT DPOF OK?
TOTAL:
9
SHEETS
4
Press MENU/OK to start printing.
48
Printing Pictures via USB (D Only)
The K PRINT ORDER (DPOF) option in the play-
back F-mode menu can be used to create a digi-
tal “print order” for PictBridge-compatible printers
(pg. 47) or devices that support DPOF.
DPOF
DPOF (Digital Print Order Format) is standard
that allows pictures to be printed fromprint
orders” stored in internal memory or on a
memory card. The information in the order
includes the pictures to be printed and the number
of copies of each picture.
WITH DATE
WITH DATE s
/ WITHOUT DATE
/ WITHOUT DATE
To modify the DPOF print order, select
K
K PRINT
ORDER (DPOF) in the playback F-mode menu
and press the selector up or down to highlight
WITH DATE s or WITHOUT DATE.
MODE MENU
SLIDE SHOW
IR COMMUNICATION
PRINT ORDER
(
DPOF
)
WITHOUT DATE
RESET ALL
WITH DATE
WITH DATE s: Print date of record-
ing on pictures.
WITHOUT DATE: Print pictures without
date.
Press MENU/OK and follow the steps below.
1
Press the selector left or right to dis-
play a picture you wish to include in
or remove from the print order.
2
Press the selector up or down to
choose the number of copies (up
to 99). To remove a picture from the
order, press the selector down until
the number of copies is 0.
SHEETS
DPOF:
00001
01
PRINT ORDER
(
DPOF
)
SET
FRAME
Total number of prints
Number of copies
2 Tip: Intelligent Face Detection
If the current picture was created with Intelligent
Face Detection (pg. 64), pressing R sets the num-
ber of copies to the number of faces detected.
Creating a DPOF Print Order
Creating a DPOF Print Order
49
Connections
Printing Pictures via USB (D Only)
3
Repeat steps 12 to complete the
print order. Press MENU/OK to save the
print order when settings are com-
plete, or DISP/BACK to exit without changing the
print order.
4
The total number of prints is dis-
played in the monitor. Press MENU/OK
to exit.
The pictures in the current
print order are indicated by a
u icon during playback.
RESET ALL
RESET ALL
To cancel the current print or-
der, select RESET ALL in the
K PRINT ORDER (DPOF)
menu. The con rmation shown
at right will be displayed; press
MENU/OK to remove all pictures from the order.
1 Notes
Remove the memory card to create or modify a print
order for the pictures in internal memory.
Print orders can contain a maximum of 999 pictures.
If a memory card is inserted con-
taining a print order created by
another camera, the message
shown at right will be displayed.
Pressing MENU/OK cancels the
print order; a new print order
must be created as described above.
YES CANCEL
RESET DPOF OK?
YES CANCEL
RESET DPOF OK?
YES CANCEL
RESET DPOF OK?
YES CANCEL
RESET DPOF OK?
50
Viewing Pictures on a Computer
The supplied FinePixViewer software can be used to copy pictures to a computer, where they can be
stored, viewed, organized, and printed. Before proceeding, install FinePixViewer as described below.
Do NOT connect the camera to the computer until installation is complete.
Installing FinePixViewer
Installing FinePixViewer
1
Con rm that the computer meets the following system requirements:
OS
OS
Preinstalled versions of Windows Vista, Windows XP Home Edition (Service Pack 2), or Windows XP Professional
(Service Pack 2)
CPU
CPU
Windows Vista: 800 MHz Pentium 4 or better (3 GHz Pentium 4 or better recommended)
Windows XP: 800 MHz Pentium 4 or better (2 GHz Pentium 4 or better recommended)
RAM
RAM
Windows Vista: 512 MB or more (1 GB or more recommended)
Windows XP: 512 MB or more
Free disk
Free disk
space
space
A minimum of 450 MB required for installation with 600 MB available when FinePixViewer is running (15 GB or
more recommended under Windows Vista, 2 GB or more recommended under Windows XP)
Video
Video 800 × 600 pixels or more with 16-bit color or better (1,024 × 768 pixels or more with 32-bit color recommended)
Other
Other
Built-in USB port recommended. Operation is not guaranteed with other USB ports.
Internet connection (56 kbps or faster recommended) required to use FinePix Internet Service; Internet con-
nection and e-mail software required to use e-mail option.
3 Caution
For information about Windows 7, visit http://www.fujifilm.com/support/download/camera/software/. Other
versions of Windows are not supported. Operation is not guaranteed on home-built computers or computers
that have been upgraded from earlier versions of Windows.
2
Start the computer. Log in to an account with administrator privileges before proceeding.
51
Connections
Viewing Pictures on a Computer
3
Exit any applications that may be running and insert the installer CD in a CD-ROM drive.
Windows Vista
If an AutoPlay dialog is displayed, click SETUP.exe. A “User Account Control” dialog will then be displayed;
click Allow.
The installer will start automatically; click Installing FinePixViewer and follow the on-screen in-
structions to install FinePixViewer. Note that the Windows CD may be required during installation.
If the Installer Does Not Start Automatically
If the installer does not start automatically, select Computer or My Computer from the start menu, then
double-click the FINEPIX CD icon to open the FINEPIX CD window and double-click SETUP or SETUP.exe.
4
If prompted to install Windows Media Player or DirectX, follow the on-screen instructions to com-
plete installation.
5
When prompted, remove the installer CD from the CD-ROM drive and click Restart to restart the
computer. Store the installer CD in a dry location out of direct sunlight in case you need to re-install
the software. The version number is printed at the top of the CD label for reference when updating
the software or contacting customer support.
Installation is now complete. Proceed to “Connecting the Camera” on page 52. Note that the Windows
CD may be required when the camera is connected for the  rst time.
52
Viewing Pictures on a Computer
1
If the pictures you wish to copy are stored on a
memory card, insert the card into the camera
(pg. 7). If no card is inserted, pictures will be
copied from internal memory.
3 Caution
Loss of power during transfer could result in loss of
data or damage to internal memory or the memory
card. Charge the battery before connecting the
camera.
2
Turn the camera o and connect the supplied
USB cable as shown, making sure the connec-
tors are fully inserted. Connect the camera di-
rectly to the computer; do not use a USB hub
or keyboard.
3
Press the a button for about a second to turn
the camera on. FinePixViewer will start auto-
matically and the “Save Image Wizard” will be
displayed. Follow the on-screen instructions to
copy pictures to the computer. To exit without
copying pictures, click Cancel.
3 Caution
If FinePixViewer does not start automatically, the
software may not be correctly installed. Disconnect
the camera and reinstall the software.
For more information on using FinePixViewer,
select How to Use FinePixViewer in the
FinePixViewer Help menu.
Connecting the Camera
Connecting the Camera
1 Note
The camera will not turn o automatically while connected to a computer.
53
Connections
Viewing Pictures on a Computer
3 Cautions
Use only memory cards that have been formatted
in the camera and contain pictures taken with the
camera. If a memory card containing a large number
of images is inserted, there may be a delay before
FinePixViewer starts and FinePixViewer may be un-
able to import or save images. Use a memory card
reader to transfer pictures.
• Make sure the indicator lamp is out before turning the
camera o or disconnecting the USB cable. Failure to
observe this precaution could result in loss of data or
damage to internal memory or the memory card.
Disconnect the camera before inserting or removing
memory cards.
In some cases, it may not be possible to access pic-
tures saved to a network server using FinePixViewer
in the same way as on a standalone computer.
The user bears all applicable fees charged by the
phone company or Internet service provider when
using services that require an Internet connection.
Disconnecting the Camera
After con rming that the indicator lamp is out, follow
the on-screen instructions to turn the camera o and
disconnect the USB cable.
Updating FinePixViewer
The latest version of FinePixViewer can be download-
ed from http://www.fujifilm.com/.
Uninstalling FinePixViewer
Only uninstall FinePixViewer before reinstalling the
software or when it is no longer required. After quit-
ting FinePixViewer and disconnecting the camera,
open the control panel and use “Programs and Fea-
tures” (Windows Vista) or “Add or Remove Programs”
(Windows XP) to uninstall FinePixViewer, FinePix
Resource, and FinePix Studio. Under Windows, one
or more con rmation dialogs may be displayed; read
the contents carefully before clicking OK.
54
IR Communication
Still pictures can be copied from the camera to any device that supports high-speed infrared or
IrSimple, including the optional FinePix REAL 3D V1 digital viewer. The camera can receive still pictures
from devices that support high-speed infrared or IrSimpleShot™ (IRSS™). Before sharing pictures, match
the M IR COMMUNICATION option in the camera setup menu to the infrared transmission type used
by the other device (pg. 81). For details, see the manual provided with the device.
To share pictures, place the camera about 5 to 20 cm from the other device with
the infrared ports pointing directly at each other. The ports should be at no more
than a 15 ° angle. Be sure both devices are on.
Maximum angle: approximately 15 °
3 Caution
Make sure that there are no obstacles between the two devices and that the infrared ports are correctly aligned
and are not in direct sunlight or directly under a  uorescent light. Remote controls and other infrared devices and
equipment that generates electrical noise may interfere with transmission.
2 Tips
For information on supported infrared devices, consult the compatibility information for this camera at the fol-
lowing website: http://fujifilm.com/products/digital_cameras/support/ir.html.
C images can only be transmitted to supported devices. Play images back in D before transmitting them to
other devices.
55
Connections
IR Communication
1
Press the
F
button and select
M
IR
COMMUNICATION in the
F-mode
menu. Pictures are displayed as
shown below.
IR COMMUNICATION
CANCEL
TRANSMIT RECEIVE
2
Press the selector left or right to dis-
play a picture you wish to send.
3
Press the F button to begin trans-
mission.
CANCEL
IR COMMUNICATION
TRANSMITTING DATA
TRANSMITTING DATA
TRANSMISSION COMPLETED will appear in
the monitor when transmission is complete.
Sending Pictures to Other Devices
Sending Pictures to Other Devices
56
IR Communication
1
Press the
F
button and select
M
IR
COMMUNICATION in the
F-mode
menu.
IR COMMUNICATION
CANCEL
TRANSMIT RECEIVE
2
On the sending device, select the
picture to be transmitted.
3
Press MENU/OK on the receiving de-
vice to begin transmission.
CANCEL
IR COMMUNICATION
RECEIVING DATA
RECEIVING DATA
DATA RECEIVED will appear in the monitor
when transmission is complete. Pictures re-
ceived from other devices are indicated by a
m (“gift”) icon during playback.
Receiving Pictures from Other Devices
Receiving Pictures from Other Devices
3 Cautions
If an error is displayed during transmission, press MENU/OK to retransmit the picture or press DISP/BACK to cancel.
Image size may be reduced for transmission. O- and P-size pictures are converted to size Q (pg. 59).
Movies can not be shared via infrared. C pictures displayed in D are converted to JPEG for transmission;
otherwise,
C pictures are transmitted in C format.
57
Menus
Using the Menus: Shooting Mode
The F-mode and shooting menus contain settings for a wide range of shooting conditions.
Using the
Using the
F
F
-Mode Menu
-Mode Menu
1
Press the F button to display the
F-mode menu.
AUTO
N
STD
4:3
COLOR
MODE MENU
ISO
IMAGE SIZE
IMAGE QUALITY
2
Press the selector up or down to
highlight the desired menu item.
3
Press the selector right to display op-
tions for the highlighted item.
MODE MENU
IMAGE QUALITY
N
4:3
AUTO
STD
NORMAL
FINE
4
Press the selector up or down to
highlight the desired option.
5
Press MENU/OK to select the high-
lighted option.
58
Using the Menus: Shooting Mode
F
F
-Mode Menu Options
-Mode Menu Options
Menu item
Menu item
Description
Description
Options
Options
Default
Default
N ISO
Adjust ISO sensitivity (pg. 59). Choose higher values when the
subject is poorly lit.
AUTO / 1600 / 800 / 400 / 200 / 100 AUTO
O IMAGE SIZE Choose image size and aspect ratio (pg. 59).
O 4 : 3 / O 3 : 2 /
P 4 : 3 / Q 4 : 3
O 4 : 3
T IMAGE QUALITY Choose image quality (pg. 60). F / NN
D WHITE BALANCE Adjust color for di erent light sources (pg. 60).
AUTO/i/j/k/l/m/n/g
AUTO
P G COLOR
Shoot pictures in standard or saturated color or in black-and-
white (pg. 61).
STD/a/b STD
d SET SHUTTERSPEED,
APERTURE.
Adjust exposure for bright, dark, or high-contrast scenes in
modes M (pg. 29).
——
d SETTING APERTURE
Adjust exposure for bright, dark, or high-contrast scenes in
modes A (pg. 30).
——
d EXP. COMPENSATION
Adjust exposure for bright, dark, or high-contrast scenes in
mode P (pg. 31).
——
1 Note
Some options are not available in all shooting modes.
59
Menus
Using the Menus: Shooting Mode
N
N
ISO
ISO
Control the camera’s sensitivity to light. Higher
values can be used to reduce blur when lighting
is poor; note, however, that mottling may appear
in pictures taken at high sensitivities. If AUTO is
selected, the camera will adjust sensitivity auto-
matically in response to shooting conditions.
Settings other than AUTO are
shown by an icon in the dis-
play.
ISO
100
M
1 Note
Sensitivity is not reset when the camera is turned o .
O
O
IMAGE SIZE
IMAGE SIZE
Choose the size and aspect ratio at which still pic-
tures are recorded. Large pictures can be printed
at large sizes with no drop in quality; small pic-
tures require less memory, allowing more pictures
to be recorded.
Option
Option
Prints at sizes up to
Prints at sizes up to
O 4 : 3 31 × 23 cm (12.2 × 9.1 in.)
O 3 : 2 31 × 21 cm (12.2 × 8.1 in.)
P 4 : 3 22 × 16 cm (8.6 × 6.5 in.)
Q 4 : 3 17 × 13 cm (6.8 × 5.1 in.)
The number of pictures that can be taken at cur-
rent settings (pg. 104) is shown to the right of the
image quality icon in the display.
1 Note
Image quality is not reset when the camera is turned
o or another shooting mode is selected.
60
Using the Menus: Shooting Mode
T
T
IMAGE QUALITY
IMAGE QUALITY
Choose how much image  les are compressed.
Select FINE (low compression) for higher image
quality, NORMAL (high compression) to increase
the number of pictures that can be stored.
D
D
WHITE BALANCE
WHITE BALANCE
For natural colors, choose a setting that matches
the light source (for an explanation ofwhite bal-
ance,” see the Glossary on page 103).
Option
Option
Description
Description
AUTO
White balance adjusted automatically.
i
For subjects in direct sunlight.
j
For subjects in the shade.
k
Use under “daylight”  uorescent lights.
l
Use under “warm white”  uorescent lights.
m
Use under “cool white”  uorescent lights.
n
Use under incandescent lighting.
g
For underwater subjects in an aquarium.
If AUTO does not produce the desired results (for
example, when taking close-ups), choose the op-
tion that matches the light source.
1 Notes
Auto white balance is used with the  ash. Turn the
 a s h o  (pg. 23) to take pictures at other settings.
Results vary with shooting conditions. Play pictures
back after shooting to check colors in the monitor.
61
Menus
Using the Menus: Shooting Mode
P
P
G
G
COLOR
COLOR
Enhance contrast and color saturation or take pictures in black and white.
Option
Option
Displayed in
Displayed in
F-STANDARD
Standard contrast and saturation. Recommended in most situations.
aF-CHROME
Vivid contrast and color. Choose for vivid shots of  owers or enhanced greens and blues in
landscapes. Not available in SP mode.
bF-B&W
Take pictures in black and white.
Settings other than F-STANDARD are shown by an icon in the monitor.
1 Notes
P G COLOR is not reset when the camera is turned o or another shooting mode is selected.
Depending on the subject, the e ects of aF-CHROME may not be visible in the monitor.
62
Using the Menus: Shooting Mode
Using the Shooting Menu
Using the Shooting Menu
1
Press MENU/OK to display the shoot-
ing menu.
OFF
ON
SHOOTING MENU
POWER MANAGEMENT
SET-UP
AUTO PARALLAX CONTROL
FACE DETECTION
CONTINUOUS
2
Press the selector up or down to
highlight the desired menu item.
3
Press the selector right to display op-
tions for the highlighted item.
OFF
OFF
POWER MANAGEMENT
SET-UP
AUTO PARALLAX CONTROL
FACE DETECTION
CONTINUOUS
SHOOTING MENU
POWER SAVE
QUICK AF
4
Press the selector up or down to
highlight the desired option.
5
Press MENU/OK to select the high-
lighted option.
63
Menus
Using the Menus: Shooting Mode
Shooting Menu Options
Shooting Menu Options
Menu item
Menu item
Description
Description
Options
Options
Default
Default
A SCENE POSITION
Choose a scene for SP mode (pg. 27).
C/D/L/M/N/O/H/
Q/R/S/F/U/E
C
A SHOOTING MODE
(twin camera mode)
Choose a
D shooting mode for B mode (pg. 31).
V/X/WV
A SHOOTING MODE
(advanced C)
Choose a
C shooting mode for A mode (pg. 33).
B/AB
b FACE DETECTION
Choose whether the camera automatically detects and
sets focus and exposure for human portrait subjects. Can
be combined with red-eye removal (pg. 64).
q / g / OFF q
R CONTINUOUS
Shoot a series of pictures (pg. 65).
J/I/ OFF
OFF
j 2-COLOR SETTING
Choose color reproduction options for pictures recorded
using
X 2-COLOR (pg. 32).
a/b/ca
k 3D INTERVAL TIME
Choose the time lag for pictures recorded with
B INTERVAL 3D SHOOTING (pg. 35).
MIN. / 1.0 / 1.5 / 2.0 /
3.0 / 5.0 / 10
MIN.
l TURN
Choose the order in which pictures are taken in
A
mode (pg. 34, 35).
G/HG
C PHOTOMETRY
Choose how the camera meters exposure (pg. 66).
o/p/qo
F 2D AF MODE
Choose how the camera selects a focus area (pg. 66).
r/sr
S POWER MANAGEMENT
Optimize camera performance for increased battery life
or quick focus (pg. 67).
n/pn
i AUTO PARALLAX CONTROL
Choose ON for auto
C parallax adjustment (pg. 13). ON/ OFF ON
M SET-UP
Perform basic camera setup such as choosing a language
and setting the time and date (pg. 78).
W/X/Y/Z/V
1 Note
Some options are not available in all shooting modes.
64
Using the Menus: Shooting Mode
b
b
FACE DETECTION (
FACE DETECTION (
D
D
Only)
Only)
Intelligent Face Detection allows the camera to
automatically detect human faces and set focus
and exposure for a face anywhere in the frame for
shots that emphasize portrait subjects. Choose
for group portraits (in vertical or horizontal orien-
tations) to prevent the camera from focusing on
the background. Intelligent Face Detection also
o ers a red-eye removal option for removing
“red-eye” e ects caused by the  ash.
g ON J ON: Intelligent Face Detection and red-
eye removal on. Use with the  ash.
g ON J OFF: Intelligent Face Detection on; red-
eye removal o .
OFF: Intelligent Face Detection and red-eye re-
moval o .
2 Tip: Red-Eye Removal
When red-eye removal is on, pictures are processed to
reduce red-eye before being recorded. Select ON for
B SAVE ORG IMAGE in the setup menu (pg. 80) to
save unprocessed copies of pictures created with red-
eye removal.
2 Tip: Intelligent Face Detection
The selected face is indicated by a
green border (note that, in some
shooting modes, exposure is ad-
justed for the current shooting
mode and may not be optimized
for the selected subject). If more
than one face is detected, the
camera will select the face closest to the center of the
frame; other faces are indicated by white borders (note
that some time may be required for face detection if
the number of faces is very large). Intelligent Face De-
tection is recommended when using the self-timer for
group- or self-portraits (pg. 26).
When a picture taken with Intelligent Face Detection
is displayed, the camera can automatically select faces
for red-eye removal (pg. 71), playback zoom (pg. 37),
slide shows (pg. 69), printing (pg. 48), and cropping
(pg. 76).
AUTO
3D
Green border
AUTO
3D
Green border
65
Menus
Using the Menus: Shooting Mode
3 Cautions
If no face is detected when the shutter button is
pressed halfway (pg. 17), the camera will focus on the
subject at the center of the display and red-eye will
not be removed.
• If the subject moves as the shutter button is pressed,
their face may not be in the area indicated by the
green border when the picture is taken.
R
R
CONTINUOUS
CONTINUOUS
Capture motion in a series of pictures.
J
J TOP 40 (HIGH SPEED): The camera takes up to 40
pictures at high speed while the shutter button
is pressed. Not available in C.
I
I TOP 40: The camera takes up to 40 pictures
while the shutter button is pressed.
OFF: The camera takes one picture each time the
shutter button is pressed.
1 Notes
The  ash turns o automatically. The previously-se-
lected  ash mode is restored when OFF is selected
for R CONTINUOUS.
Frame rate varies with shutter speed.
66
Using the Menus: Shooting Mode
C
C
PHOTOMETRY
PHOTOMETRY
Choose how the camera meters exposure when
Intelligent Face Detection (pg. 64) is o .
o MULTI: Automatic scene recognition is used
to adjust exposure for a wide range of shooting
conditions.
p SPOT: The camera meters lighting conditions
at the center of the frame. Recommended when
the background is much brighter or darker than
the main subject. Can be used with focus lock
(pg. 20) to meter o -center subjects.
q AVERAGE: Exposure is set to the average for
the entire frame. Provides consistent exposure
across multiple shots with the same lighting,
and is particularly e ective for landscapes and
portraits of subjects dressed in black or white.
F
F
2D AF MODE (
2D AF MODE (
D
D
Only)
Only)
This option controls how the camera selects the
focus area. Regardless of the option selected, the
camera will focus on the subject in the center of
the monitor when macro mode is on (pg. 22).
r CENTER: The camera focus-
es on the subject in the cen-
ter of the frame. This option
can be used with focus lock.
2D
M
s MULTI: When the shutter button is pressed
halfway, the camera detects high-contrast sub-
jects near the center of the frame and selects
the focus area automatically (if the focus frame is
not displayed, select r CENTER and use focus
lock; pg. 20).
2D
M
Press
halfway
Focus frame
67
Menus
Using the Menus: Shooting Mode
S
S
POWER MANAGEMENT
POWER MANAGEMENT
Optimize camera performance for increased battery life or quick focus response.
n POWER SAVE: Monitor refresh rate is reduced. If no operations are performed for 10 s, the monitor
will dim automatically to save power. This option is recommended when the camera is used for
extended periods at high temperatures to prevent mottled vertical streaks from appearing in photo-
graphs.
p QUICK AF:
Reduces focusing time, ensuring a quick shutter response
. The monitor dims to save pow-
er only if no operations are performed for 30 s. An icon appears in the display.
1 Notes
n POWER SAVE does not take e ect when Intelligent Face Detection is on.
• If OFF is selected for M AUTO POWER OFF, changing the option selected for S POWER MANAGEMENT
resets M AUTO POWER OFF to 5 MIN (pg. 85).
68
Using the Menus: Playback Mode
The F-mode and playback menus are used to manage the pictures in internal memory or on the
memory card.
1
Press the a button to enter play-
back mode (pg. 36).
2
Press the F button to display the
F-mode menu.
MODE MENU
SLIDE SHOW
IR COMMUNICATION
PRINT ORDER
(
DPOF
)
3
Press the selector up or down to
highlight the desired menu item.
4
Press the selector right to display op-
tions for the highlighted item.
MODE MENU
SLIDE SHOW
IR COMMUNICATION
PRINT ORDER
(
DPOF
)
FADE-IN
NORMAL
FADE-IN
NORMAL
MULTIPLE
3
D FADE
5
Press the selector up or down to
highlight the desired option.
6
Press MENU/OK to select the high-
lighted option.
Using the
Using the
F
F
-Mode Menu
-Mode Menu
69
Menus
Using the Menus: Playback Mode
F
F
-Mode Menu Options
-Mode Menu Options
Option
Option
Description
Description
M IR COMMUNICATION
Copy pictures to other devices via in-
frared (pg 54).
I SLIDE SHOW
View pictures in a slide show.
K PRINT ORDER (DPOF)
Select pictures for printing on DPOF-
and PictBridge-compatible devices
(pg. 47, 48).
I
I
SLIDE SHOW
SLIDE SHOW
View pictures in an automated slide show. Choose
the type of show and press MENU/OK to start. Press
DISP/BACK at any time during the show to view on-
screen help. When a movie is displayed, movie play-
back will begin automatically, and the slide show
will continue when the movie ends. The show can
be ended at any time by pressing MENU/OK.
Option
Option
Displayed in
Displayed in
NORMAL
Press selector left or right to go back or
skip ahead one frame. Select FADE-IN
for fade transitions between frames.
FADE-IN
NORMAL
g
As above, except that camera automati-
cally zooms in on faces selected with
Intelligent Face detection.
FADE-IN
g
MULTIPLE Display several pictures at once.
3D FADE
C images fade in from D to C.
1 Note
The camera will not turn o automatically while a slide
show is in progress.
70
Using the Menus: Playback Mode
Using the Playback Menu
Using the Playback Menu
1
Press a to enter playback mode.
2
Press MENU/OK to display the play-
back menu.
PLAYBACK MENU
PARALLAX CONTROL
IMAGE ROTATE
RED EYE REMOVAL
PROTECT
COPY
ERASE
3
Press the selector up or down to
highlight the desired menu item.
4
Press the selector right to display op-
tions for the highlighted item.
PLAYBACK MENU
PARALLAX CONTROL
IMAGE ROTATE
RED EYE REMOVAL
PROTECT
COPY
ERASE
FRAME
ALL FRAMES
BACK
5
Press the selector up or down to
highlight the desired option.
6
Press MENU/OK to select the high-
lighted option.
Playback Menu Options
Playback Menu Options
The following options are available:
Option
Option
Description
Description
i PARALLAX CONTROL
Create copies of
C pictures with
modi ed parallax (pg. 71).
A ERASE
Delete all or selected pictures (pg. 39).
B RED EYE REMOVAL
Create copies with reduced red eye (pg.
71).
C IMAGE ROTATE
Rotate pictures (pg. 72).
D PROTECT
Protect pictures from accidental dele-
tion (pg. 73).
E COPY
Copy pictures between internal memo-
ry and a memory card (pg. 74).
G CROP
Create cropped copies of pictures (pg.
76).
O RESIZE
Create small copies of pictures (pg. 77).
M SET-UP
Perform basic camera setup (pg. 78).
71
Menus
Using the Menus: Playback Mode
i
i
PARALLAX CONTROL (
PARALLAX CONTROL (
C
C
Only)
Only)
If the current picture is marked with a g icon to
indicate that it was taken in C, this option can
be used to create a copy with modi ed parallax.
Press R or S to adjust parallax (pg. 13), then select
i PARALLAX CONTROL in the playback menu
and press MENU/OK to create a copy with modi ed
parallax.
PLAYBACK MENU
PARALLAX CONTROL
IMAGE ROTATE
RED EYE REMOVAL
PROTECT
COPY
ERASE
CANCEL
3D
100-0001
100-0001
0
0
STORE
CORRECTION
B
B
RED EYE REMOVAL (
RED EYE REMOVAL (
D
D
Only)
Only)
If the current picture is marked with a g icon to
indicate that it was taken with Intelligent Face De-
tection, this option can be used to remove red-
eye. The camera will analyze the image; if red-eye
is detected, the image will be processed to create
a copy with reduced red-eye.
PLAYBACK MENU
PARALLAX CONTROL
IMAGE ROTATE
RED EYE REMOVAL
PROTECT
COPY
ERASE
YES CANCEL
REMOVAL OK?
1 Notes
Red eye may not be removed if the camera is unable
to detect a face or the face is in pro le. Results may
di er depending on the scene. Red eye can not be
removed from pictures that have already been pro-
cessed using red-eye removal or pictures created
with other devices.
• The amount of time needed to process the image
varies with the number of faces detected.
• Copies created with B RED EYE REMOVAL are indi-
cated by a e icon during playback.
72
Using the Menus: Playback Mode
By default, pictures taken in
tall orientation are displayed
in wide orientation. Use this
option to display pictures in
the correct orientation in the
monitor. It has no e ect on pictures displayed on
a computer or other device.
1 Notes
C images and protected pictures can not be rotat-
ed. Remove protection before rotating D images
(pg. 73).
The camera may not be able to rotate pictures cre-
ated with other devices.
To rotate a picture, play the picture back and se-
lect C IMAGE ROTATE in the playback menu.
1
Press the selector down to rotate the
picture 90 ° clockwise, up to rotate
the picture 90 ° counterclockwise.
2
Press MENU/OK to con rm the opera-
tion (to exit without rotating the pic-
ture, press DISP/BACK).
The next time the picture is played back, it will
automatically be rotated.
C
C
IMAGE ROTATE (
IMAGE ROTATE (
D
D
Only)
Only)
IMAGE ROTATE
CANCELSET
IMAGE ROTATE
CANCELSET
73
Menus
Using the Menus: Playback Mode
D
D
PROTECT
PROTECT
Protect pictures from accidental deletion. The following options are available.
FRAME
FRAME
Protect selected pictures.
1
Press the selector left or right to dis-
play the desired picture.
YES CANCEL
PROTECT OK?
YES CANCEL
UNPROTECT OK?
Picture not protected Protected picture
2
Press MENU/OK to protect the picture.
If the picture is already protected,
pressing MENU/OK will remove pro-
tection from the image.
3
Repeat steps 12 to protect addi-
tional images. Press DISP/BACK to exit
when the operation is complete.
SET ALL
SET ALL
Press MENU/OK to protect all
pictures, or press DISP/BACK to
exit without changing picture
status.
YES CANCEL
SET ALL OK?
IT MAY TAKE A WHILE
RESET ALL
RESET ALL
Press MENU/OK to remove pro-
tection from all pictures, or
press DISP/BACK to exit without
changing picture status.
YES CANCEL
RESET ALL OK?
IT MAY TAKE A WHILE
If the number of pictures af-
fected is very large, the dis-
play at right will appear in the
monitor while the operation is
in progress. Press DISP/BACK to
exit before the operation is complete.
3 Caution
Protected pictures will be deleted when the memory
card or internal memory is formatted (pg. 85).
CANCELCANCEL
74
Using the Menus: Playback Mode
E
COPY
COPY
Copy pictures between internal memory and a memory card.
1
Press the selector up or down to
highlight a INTERNAL MEMORY
y b CARD (copy from internal
memory to the memory card) or
b CARD y a INTERNAL MEM-
ORY (copy from a memory card to
internal memory).
2
Press the selector right to display op-
tions for the highlighted item.
YES CANCEL
COPY
INTERNAL MEMORY
CARD
CARD
INTERNAL MEMORY
ALL FRAMES
FRAME
3
Press the selector up or down to
highlight FRAME or ALL FRAMES.
4
Press MENU/OK.
2 Tip: Copying Pictures Between Memory Cards
To copy pictures between two memory cards, insert
the source card and copy the pictures to internal mem-
ory, then remove the source card, insert the destination
card, and copy the pictures from internal memory.
75
Menus
Using the Menus: Playback Mode
FRAME
FRAME
Copy selected frames.
100-0001
100-0001
YES CANCEL
COPY OK?
1
Press the selector left or right to dis-
play the desired picture.
2
Press MENU/OK to copy the picture.
3
Repeat steps 12 to copy additional
images. Press DISP/BACK to exit when
the operation is complete.
ALL FRAMES
ALL FRAMES
Press MENU/OK to copy all pic-
tures, or press DISP/BACK to exit
without copying pictures.
YES CANCEL
100-0001
100-0001
IT MAY TAKE
A WHILE
COPY ALL OK?
3 Cautions
Copying ends when the destination is full.
DPOF print information is not copied (pg. 48).
76
Using the Menus: Playback Mode
G
G
CROP
CROP
To create a cropped copy of a picture, play the picture back and select G CROP in the playback menu
(pg. 70).
1
Use the zoom control to zoom in and out and
use the selector to scroll the picture until the
desired portion is displayed (to exit to single-
frame playback without creating a cropped
copy, press DISP/BACK).
YES CANCEL
CROP
Zoom indicator
Navigation window
shows portion of im-
age currently displayed
in monitor
If the size of the  nal copy will be a, OK will
be displayed in yellow.
2 Tip: Intelligent Face Detection (D Only)
If the picture was shot with
Intelligent Face Detection (pg.
64
), g will be displayed in the
monitor. Press the R button
to zoom in on the selected
face.
2
Press MENU/OK. A con rmation dia-
log will be displayed.
CANCELREC
REC OK?
Copy size (P, Q, or a) is shown at the top.
Larger crops produce larger copies; all copies
have an aspect ratio of 4 : 3.
3
Press MENU/OK to save the cropped
copy to a separate  le.
YES CANCEL
FACE CROPPING
CROP
YES CANCEL
FACE CROPPING
CROP
77
Menus
Using the Menus: Playback Mode
O
O
RESIZE
RESIZE
To create a small copy of a picture, play the picture back and select O RESIZE in the playback menu
(pg. 70).
1
Press the selector up or down
to highlight a STANDARD or
b SMALL.
2
Press MENU/OK to select the high-
lighted option.
3
Press MENU/OK to copy the picture at
the selected size.
78
The Setup Menu
Using the Setup Menu
Using the Setup Menu
1
Display the setup menu.
1.1 Press MENU/OK to display the
menu for the current mode.
1.2 Press the selector up or down
to highlight M SET-UP.
1.3 Press the selector right to dis-
play the setup menu.
MPO+JPEG
3
DREC
SET-UP
IMAGE DISP.
FRAME NO.
SAVE ORG IMAGE
ILLUMINATION
DIGITAL ZOOM
OFF
OFF
ON
CONT.
1.5
SEC
2
Choose a page.
2.1 Press the selector left or right to
choose a page.
SET-UP
2
MIN
ON
ENGLISH
AUTO POWER OFF
FORMAT
TIME DIFFERENCE
GUIDANCE DISPLAY
BACKGROUND COLOR
2.2 Press the selector down to en-
ter the menu.
79
Menus
The Setup Menu
3.1 Press the selector up or down
to highlight a menu item.
ON
SET-UP
2
MIN
ENGLISH
AUTO POWER OFF
FORMAT
TIME DIFFERENCE
GUIDANCE DISPLAY
BACKGROUND COLOR
3.2 Press the selector right to dis-
play options for the highlighted
item.
SET-UP
2
MIN
ON
ENGLISH
AUTO POWER OFF
FORMAT
TIME DIFFERENCE
GUIDANCE DISPLAY
BACKGROUND COLOR
2
MIN
OFF
5
MIN
3.3 Press the selector up or down
to highlight an option.
3.4 Press MENU/OK to select the
highlighted option.
3
Adjust settings.
80
The Setup Menu
Setup Menu Options
Setup Menu Options
Menu item
Menu item
Description
Description
Options
Options
Default
Default
W
A IMAGE DISP.
Choose how long pictures are displayed after shooting (pg.
82).
3 SEC / 1.5 SEC / ZOOM / OFF 1.5 SEC
B FRAME NO. Choose how  les are named (pg. 83). CONT. / RENEW CONT.
B SAVE ORG IMAGE
Choose whether to save unprocessed copies of pictures
taken using red-eye removal.
ON / OFF OFF
a ILLUMINATION
If ON is selected, the shooting indicator will light when the
camera is turned on. It will also light after a picture is taken
to let the subjects know that shooting is complete.
ON / OFF ON
D DIGITAL ZOOM Enable or disable digital zoom (pg. 84). ON / OFF OFF
o 3DREC
Choose MPO+JPEG to save JPEG copies of C images (pg.
84).
MPO+JPEG / MPO MPO+JPEG
X
F DATE/TIME Set the camera clock (pg.11).
G OPERATION VOL. Adjust the volume of camera controls.
b (high) / c (mid) /
d (low) / e OFF (mute)
c
H
SHUTTER VOLUME Adjust the volume of the shutter sound.
e SHUTTER SOUND Choose the sound made by the shutter. i / j
i
I
PLAYBACK VOLUME Adjust the volume for movie playback (pg. 84). 7
J LCD BRIGHTNESS Control the brightness of the display (pg. 84). 0
Y
K FORMAT Format internal memory or memory cards (pg. 85).
L a
Choose a language (pg.11). See page 107 ENGLISH
M AUTO POWER OFF Choose the auto power o delay (pg. 85). 5 MIN / 2 MIN / OFF 2 MIN
N TIME DIFFERENCE Set the clock to local time (pg. 86). h/g
h
O
BACKGROUND COLOR Choose a color scheme for menus and cursors.
c GUIDANCE DISPLAY Choose whether to display tool tips. ON / OFF ON
81
Menus
The Setup Menu
Menu item
Menu item
Description
Description
Options
Options
Default
Default
Z
Q VIDEO SYSTEM Choose a video mode for connection to a TV (pg. 44). NTSC / PAL
M IR COMMUNICATION
Choose a standard for infrared transmission: STANDARD
for use with cameras, printers, or digital viewers, IrSS for use
with TVs (pg.
54
).
STD / IrSS STD
p 3D LEVEL
Choose the amount of 3D e ect in the setup menu.
OFF / LEVEL 13LEVEL 1
r 3D CAUTION DISP
Disable C to prevent fatigue or display a warning after 30
minutes of use (pg. 87).
ON / OFF / NOT 3D ON
q OPT AXIS CONTROL Align the optical axes of the twin lenses (pg. 87). 0
R RESET
Reset all settings except F DATE/TIME, N TIME DIF-
FERENCE, O BACKGROUND COLOR, and Q VIDEO
SYSTEM to default values. A con rmation dialog will be
displayed, press the selector left or right to highlight OK
and press MENU/OK.
——
V
s DEMO MODE
If ON is selected when the camera is powered by an AC pow-
er adapter, a demo will play when the camera is turned on.
Press the shutter button to exit demo mode.
ON / OFF ON
82
The Setup Menu
A
A
IMAGE DISP.
IMAGE DISP.
Choose how long pictures are displayed in the monitor after shooting.
3 SEC/1.5 SEC: Pictures are displayed for the speci ed time before being recorded to the memory card.
Colors may di er from those in the  nal picture.
ZOOM (CONTINUOUS): Pictures are displayed until the MENU/OK button is pressed. Pictures can be zoomed
in to check  ne details. Not available in C or B mode or when an option other than OFF is
selected for R CONTINUOUS (pg. 65).
OFF: Pictures are not automatically displayed after shooting.
83
Menus
The Setup Menu
B
B
FRAME NO.
FRAME NO.
New pictures are stored in image  les named using a four-digit  le number as-
signed by adding one to the last le number used. The le number is displayed dur-
ing playback as shown at right. B FRAME NO. controls whether  le numbering is
reset to 0001 when a new memory card is inserted or the current memory card or
internal memory is formatted.
CONTINUOUS: Numbering continues from the last  le number used or the  rst available  le number,
whichever is higher. Choose this option to reduce the number of pictures with duplicate  le names.
RENEW: Numbering is reset to 0001 after formatting or when a new memory card is inserted.
1 Notes
If the frame number reaches 999-9999, the shutter release will be disabled (pg. 100).
• Selecting R RESET (pg. 81) resets B FRAME NO. to CONTINUOUS but does not reset frame numbering.
Frame numbers for pictures taken with other cameras may di er.
100-0001
100-0001
Frame number
File
number
Directory
number
100-0001
100-0001
Frame number
File
number
Directory
number
84
The Setup Menu
D
D
DIGITAL ZOOM (
DIGITAL ZOOM (
D
D
Only)
Only)
If ON is selected, selecting T at the maximum
optical zoom position will trigger digital zoom,
further magnifying the image. To cancel digital
zoom, zoom out to the minimum digital zoom
position and select W.
AUTO
Zoom
indicator
Zoom indicator,
DIGITAL ZOOM on
Zoom indicator,
DIGITAL ZOOM o
WWTT
Digital
zoom
Optical zoom
Optical zoom
3 Caution
Digital zoom produces lower quality images than opti-
cal zoom.
o
o
3DREC
3DREC
Choose MPO to save C images in multi-picture
(MPO) format, MPO+JPEG to save a JPEG copy in
addition to the multi-picture  le. For information
on  le formats, see the Glossary on page 102.
1 Note
MPO  les can not be printed in
D
D (pg. 45). The sup-
plied FinePixViewer is required to view MPO  les on a
computer (pg. 50).
I
I
PLAYBACK VOLUME
PLAYBACK VOLUME
Press the selector up or down
to choose volume for movie
playback and press MENU/OK to
select.
SET CANCEL
7
VOLUME
J
J
LCD BRIGHTNESS
LCD BRIGHTNESS
Press the selector up or down
to choose display brightness
and press MENU/OK to select.
SET CANCEL
0
LCD BRIGHTNESS
85
Menus
The Setup Menu
K
FORMAT
FORMAT
Format internal memory or
a memory card. If a memory
card is inserted in the cam-
era, this option will format the
memory card. If no memory
card is inserted, a will be displayed in the format
dialog and this option will format internal mem-
ory. Press the selector left to highlight OK and
press MENU/OK to begin formatting.
3 Cautions
All data—including protected pictures—will be de-
leted. Be sure important  les have been copied to a
computer or other storage device.
Do not open the battery-chamber cover during for-
matting.
M
M
AUTO POWER OFF
AUTO POWER OFF
Choose the length of time before the camera
turns o automatically when no operations are
performed. Shorter times increase battery life; if
OFF is selected, the camera must be turned o
manually (note that the camera will turn o au-
tomatically after  ve minutes if p QUICK AF is
selected for
S
S POWER MANAGEMENT or if the
camera enters standby while in movie mode). Re-
gardless of the option selected, the camera will
not turn o automatically when connected to a
printer (pg. 45) or computer (pg. 50) or when a
slide show is in progress (pg. 69).
2 Tip: Reactivating the Camera
To reactivate the camera after it has turned o auto-
matically, open the lens cover or press the a button
for about a second (pg. 10).
FORMAT
SET
FORMAT OK?
ERASE ALL DATA
OK CANCEL
FORMAT
SET
FORMAT OK?
ERASE ALL DATA
OK CANCEL
86
The Setup Menu
N
N
TIME DIFFERENCE
TIME DIFFERENCE
When traveling, use this option to switch the camera clock instantly from your home time zone to the
local time at your destination.
1
Specify the di erence between local time
and your home time zone.
1.1 Press the selector up or down
to highlight g LOCAL.
1.2 Press the selector right to dis-
play the time di erence.
SET CANCEL
00
:
00
12 / 31 / 2050
12 / 31 / 2050
10: 00
AM
10: 00
AM
TIME DIFFERENCE
1.3 Press the selector left or right
to highlight +, , hours, or min-
utes; press up or down to edit.
The minimum increment is 15
minutes.
1.4 Press MENU/OK when settings
are complete.
2
Switch between local time and your home
time zone.
To set the camera clock to local time, high-
light g LOCAL and press MENU/OK. To set
the clock to the time in your home time
zone, select h HOME. If g LOCAL is se-
lected, g will be displayed in the monitor
for three seconds after the camera enters
shooting mode, and the date will be dis-
played in yellow.
12 / 31 / 2050
12 / 31 / 2050
10 : 00
AM
10 : 00
AM
AUTO
After changing time zones, check that the
date and time are correct.
87
Menus
The Setup Menu
r
r
3D CAUTION DISP
3D CAUTION DISP
To prevent fatigue, C can be disabled or a warn-
ing can be displayed after prolonged use.
ON: C enabled, but a warning is displayed after
30 minutes of continuous use (measured from
when this option is selected or the start of C
display).
OFF: C enabled with no warning displayed af-
ter prolonged use.
NOT 3D DISP: C disabled.
q
q
OPT AXIS CONTROL
OPT AXIS CONTROL
Reposition the lenses to vertically align their op-
tical axes for C photography. A setting of 0 is
recommended in most circumstances; to choose
a di erent setting, press the selector up or down
and press MENU/OK to select. Positive values raise
the left lens.
88
Technical Notes
Optional Accessories
The camera supports a wide range of accessories from FUJIFILM and other manufacturers.
Computer Related
Computer Related
Audio/Visual
Audio/Visual
Printing
Printing
TV (available from
third-party suppliers)
PictBridge-compatible printer
(available from third-party
suppliers)
USB
USB
Audio/visual
output
SD card slot or card reader
Computer (available from
third-party suppliers)
SD/SDHC
memory card
Printer (available from
third-party suppliers)
Digital Viewers
Digital Viewers
FinePix REAL 3D V1
(sold separately)
89
Technical Notes
Optional Accessories
Accessories from FUJIFILM
Accessories from FUJIFILM
The following optional accessories are available from FUJIFILM. For the latest information on the acces-
sories available in your region, check with your local FUJIFILM representative or visit http://www.fujifilm.
com/products/digital_cameras/index.html.
Rechargeable
Rechargeable
Li-ion battery
Li-ion battery
NP-95 (supplied) Additional NP-95 high-capacity rechargeable batter-
ies can be purchased as required.
Battery charger
Battery charger BC-65S The BC-65S can be used with AC 100 V–240 V, 50/60 Hz
power sources and charges an NP-95 battery in about
210 minutes at +23 °C (+73 °F).
A/V cable
A/V cable AVC-1 Connect the camera to video devices.
90
Caring for the Camera
To ensure continued enjoyment of the product, observe the following precautions.
Storage and Use
Storage and Use
If the camera will not be used for an extended pe-
riod, remove the battery and memory card. Do
not store or use the camera in locations that are:
exposed to rain, steam, or smoke
very humid or extremely dusty
• exposed to direct sunlight or very high tempera-
tures, such as in a closed vehicle on a sunny day
• extremely cold
subject to strong vibration
exposed to strong magnetic  elds, such as near
a broadcasting antenna, power line, radar emit-
ter, motor, transformer, or magnet
in contact with volatile chemicals such as pesti-
cides
next to rubber or vinyl products
Water and Sand
Water and Sand
Exposure to water and sand can also damage the
camera and its internal circuitry and mechanisms.
When using the camera at the beach or seaside,
avoid exposing the camera to water or sand. Do
not place the camera on a wet surface.
Condensation
Condensation
Sudden increases in temperature, such as occur
when entering a heated building on a cold day,
can cause condensation inside the camera. If this
occurs, turn the camera off and wait an hour be-
fore turning it on again. If condensation forms on
the memory card, remove the card and wait for
the condensation to dissipate.
Cleaning
Cleaning
Use a blower to remove dust from the lens and
monitor, then gently wipe with a soft, dry cloth.
Any remaining stains can be removed by wiping
gently with a piece of FUJIFILM lens-cleaning pa-
per to which a small amount of lens-cleaning  uid
has been applied. Care should be taken to avoid
scratching the lens or monitor. The camera body
can be cleaned with a soft, dry cloth. Do not use
alcohol, thinner, or other volatile chemicals.
Traveling
Traveling
Keep the camera in your carry-on baggage.
Checked baggage may su er violent shocks that
could damage the camera.
91
Troubleshooting
Troubleshooting
Power and Battery
Problem
Problem
Possible cause
Possible cause
Solution
Solution
Page
Page
Power
supply
The camera does
not turn on.
The battery is exhausted. Insert a fresh or fully-charged spare battery. 4
The battery is not in the correct orientation. Re-insert the battery in the correct orientation. 4
The battery-chamber cover is not latched. Latch the battery-chamber cover. 5
The AC power adapter is not connected
properly.
Make sure that the AC power adapter is prop-
erly connected.
6
The battery runs
down quickly.
The battery is cold.
Warm the battery by placing it in a pocket or
other warm place and re-insert it in the camera
immediately before taking a picture.
v
There is dirt on the battery terminals. Clean the terminals with a soft, dry cloth.
The battery has been charged many times.
The battery has reached the end of its charging
life. Purchase a new battery.
p QUICK AF is selected for S POWER
MANAGEMENT.
Select n POWER SAVE to reduce the drain on
the battery.
67
The camera turns
o suddenly.
The battery is exhausted. Insert a fresh or fully-charged spare battery. 4
The AC power adapter has been discon-
nected.
Reconnect the AC power adapter. 6
Charging
batteries
Charging does
not start.
The battery is not correctly inserted. Re-insert the battery in the camera.
The battery is not in the correct orientation. Re-insert the battery in the correct orientation. 4
The AC power adapter is not correctly
plugged into a power outlet.
Plug the adapter correctly into the power out-
let.
6
Charging is slow. The temperature is low. Charge the battery at room temperature.
The indicator
lamp lights, but
the battery does
not charge.
There is dirt on the battery terminals. Clean the terminals with a soft, dry cloth.
The battery has been charged many times.
The battery has reached the end of its charging
life. Purchase a new battery. If the battery still
fails to charge, contact your FUJIFILM dealer.
108
92
Troubleshooting
Menus and Displays
Problem
Problem
Possible cause
Possible cause
Solution
Solution
Page
Page
Menus and displays are not
in English.
English is not selected for the L a
option in the setup menu.
Select ENGLISH.80
C/D
Problem
Problem
Possible cause
Possible cause
Solution
Solution
Page
Page
C is not selected when
the 3D button is pressed.
NOT 3D DISP is selected for r 3D CAU-
TION DISP .
Select OFF or ON.87
Shooting
Problem
Problem
Possible cause
Possible cause
Solution
Solution
Page
Page
Taking
pictures
No picture is taken
when the shutter
button is pressed.
Memory is full. Insert a new memory card or delete pictures. 7, 39
Memory is not formatted.
Format the memory card or internal memory.
85
There is dirt on the memory card contacts. Clean the contacts with a soft, dry cloth.
The memory card is damaged. Insert a new memory card. 7
The battery is exhausted. Insert a fresh or fully-charged spare battery. 4
The camera has turned o automatically. Turn the camera on. 10
The monitor
goes dark after
shooting.
The  ash has  red.
The monitor may darken while the  ash
charges. Wait for the  ash to charge.
23
Focus
The camera does
not focus.
The subject is close to the camera. Select macro mode.
22
The subject is far away from the camera. Cancel macro mode.
The subject is not suited to autofocus. Use focus lock. 20
Close-ups
Macro mode is
not available.
Macro mode is not available in the current
shooting mode.
Choose a di erent shooting mode. 27
93
Troubleshooting
Troubleshooting
Problem
Problem
Possible cause
Possible cause
Solution
Solution
Page
Page
Flash
The  ash does
not  re.
The  ash is not available in the current
shooting mode.
Choose a di erent shooting mode. 27
The camera is in silent mode. Turn silent mode o .16
The battery is exhausted. Insert a fresh or fully-charged spare battery. 4
An option other than OFF is selected for
R CONTINUOUS.
Turn R CONTINUOUS o .
65
The  ash is o (
P). Choose a di erent  ash mode. 23
Flash mode not
available.
The desired  ash mode is not available in
the current shooting mode.
Choose a di erent shooting mode. 27
The camera is in silent mode. Turn silent mode o .16
The  ash does
not fully light the
subject.
The subject is not in range of the  ash. Position the subject in range of the  ash. 106
The  ash window is obstructed. Hold the camera correctly. 15
Intelligent
Face
Detection
Face detection
not available.
Intelligent Face Detection is not available in
the current shooting mode.
Choose a di erent shooting mode. 27
No face is
detected.
The subject’s face is obscured by sunglass-
es, a hat, long hair, or other objects.
Remove the obstructions.
The subject’s face occupies only a small
area of the frame.
Change the composition so that the subject’s
face occupies a larger area of the frame.
The subject’s head is at an angle or the sub-
ject is not facing the camera.
Ask the subject to face the camera and hold
their head straight.
The camera is tilted. Hold the camera straight. 15
The subject’s face is poorly lit. Shoot in bright light.
Wrong subject
selected.
The selected subject is closer to the center
of the frame than the main subject.
Recompose the picture or turn face detection
o and frame the picture using focus lock.
20
94
Troubleshooting
Problem
Problem
Possible cause
Possible cause
Solution
Solution
Page
Page
Problem
images
Pictures are
blurred.
The lens is dirty. Clean the lens. 90
The lens is blocked. Keep objects away from the lens. 15
s is displayed during shooting and the
focus frame is displayed in red.
Check focus before shooting. 98
k is displayed during shooting.
Use the  ash or a tripod. 23
Pictures are
mottled.
Slow shutter speed selected when ambient
temperature is high.
This is characteristic of CCD image sensors
and does not indicate a malfunction.
29
Vertical lines
appear in pictures.
The camera has been used continuously at
high temperatures.
Turn the camera o and wait for it to cool
down.
Recording
Pictures are not
recorded.
Power was interrupted during shooting.
Turn the camera o before connecting the
AC power adapter. Leaving the camera on
can result in corrupted  les or damage to the
memory card or internal memory.
95
Troubleshooting
Troubleshooting
Playback
Problem
Problem
Possible cause
Possible cause
Solution
Solution
Page
Page
Pictures
Pictures are grainy.
The pictures were taken with a di erent make
or model of camera.
——
Playback zoom
unavailable.
The pictures were created using O RESIZE
or with a di erent make or model of camera.
—37
Movies
No sound in
movie playback.
Playback volume is too low. Adjust playback volume. 84
The microphone was obstructed. Hold the camera correctly during recording.
The speaker is obstructed. Hold the camera correctly during playback.
Deletion
Selected pictures
are not deleted.
Some of the pictures selected for deletion are
protected.
Remove protection using the device with
which it was originally applied.
73
96
Troubleshooting
Connections
Problem
Problem
Possible cause
Possible cause
Solution
Solution
Page
Page
TV
No picture or
sound.
The camera is not properly connected. Connect the camera correctly. 44
An A/V cable was connected during movie
playback.
Connect the camera once movie playback
has ended.
43, 44
Input on the television is set to “TV. Set input to “VIDEO”.
The camera is not set to the correct video
standard.
Match the camera Q VIDEO SYSTEM set-
ting to the TV.
81
The volume on the television is too low. Adjust the volume.
No color.
The camera is not set to the correct video
standard.
Match the camera Q VIDEO SYSTEM set-
ting to the TV.
81
Computer
The computer
does not recognize
the camera.
The camera is not properly connected. Connect the camera correctly. 52–53
PictBridge
Pictures can not be
printed.
The camera is not properly connected. Connect the camera correctly. 45
The printer is o . Turn the printer on.
Only one copy is
printed.
The printer is not PictBridge-compatible.
The date is not
printed.
AC power
adapter
Demo slides are
displayed.
ON is selected for
s DEMO MODE.
Press the shutter button to exit demo and
select OFF for
s DEMO MODE.
6, 81
97
Troubleshooting
Troubleshooting
Miscellaneous
Problem
Problem
Possible cause
Possible cause
Solution
Solution
Page
Page
Nothing happens
when the shutter
button is pressed.
Temporary camera malfunction.
Remove and reinsert the battery or disconnect
and reconnect the AC power adapter.
4–5, 6
The battery is exhausted. Insert a fresh or fully-charged spare battery. 4
The camera does not
function as expected.
Temporary camera malfunction.
Remove and reinsert the battery or disconnect
and reconnect the AC power adapter. If the
problem persists, contact your FUJIFILM dealer.
4–5, 6,
108
No sound. The camera is in silent mode. Turn silent mode o .16
98
Warning Messages and Displays
The following warnings are displayed in the monitor:
Warning
Warning
Description
Description
Solution
Solution
B (red)
The battery is low.
Insert a fresh or fully-charged spare battery.
A (blinks red)
The battery is exhausted.
k
Slow shutter speed. Picture may be blurred. Use the  ash or mount the camera on a tripod.
s
(displayed in red
with red focus frame)
The camera can not focus.
Use focus lock to focus on another subject at the
same distance, then recompose the picture (pg. 20).
If the subject is poorly lit, try focusing at a distance of
about 2 m (6.6 ft.).
Use macro mode to focus when taking close-ups.
Aperture or shutter
speed shown in red
The subject is too bright or too dark. The pic-
ture will be over- or under-exposed.
If the subject is dark, use the  ash.
FOCUS ERROR
Camera malfunction.
Turn the camera o and then on again, taking care not
to touch the lens. If the message persists, contact a
FUJIFILM dealer (pg. 108).
ZOOM ERROR
LENS CONTROL ERROR
NO CARD
No memory card inserted when E COPY is
selected in the playback menu.
Insert a memory card.
CARD NOT INITIALIZED
The memory card or internal memory is not
formatted or the memory card was formatted
in a computer or other device.
Format the memory card or internal memory using the
K FORMAT option in the camera setup menu (pg.
85).
The memory card contacts require cleaning.
Clean the contacts with a soft, dry cloth. If the mes-
sage is repeated, format the memory card (pg. 85). If
the message persists, replace the memory card.
Camera malfunction. Contact a FUJIFILM dealer (pg. 108).
PROTECTED CARD The memory card is locked. Unlock the memory card (pg. 7).
BUSY The memory card is incorrectly formatted. Use the camera to format the memory card (pg. 85).
99
Troubleshooting
Warning Messages and Displays
Warning
Warning
Description
Description
Solution
Solution
CARD ERROR
The memory card is not formatted for use in
the camera.
Format the memory card (pg. 85).
The memory card contacts require cleaning or
the memory card is damaged.
Clean the contacts with a soft, dry cloth. If the mes-
sage is repeated, format the memory card (pg. 85). If
the message persists, replace the memory card.
Incompatible memory card. Use a compatible memory card.
Camera malfunction. Contact a FUJIFILM dealer (pg. 108).
b MEMORY FULL
The memory card or internal memory is full;
pictures can not be recorded or copied.
Delete pictures or insert a memory card with more free
space.
a MEMORY FULL
INTERNAL MEMORY IS FULL
INSERT A NEW CARD
WRITE ERROR
Memory card error or connection error.
Re-insert the memory card or turn the camera o
and then on again. If the message persists, contact a
FUJIFILM dealer (pg. 108).
Not enough memory remaining to record ad-
ditional pictures.
Delete pictures or insert a memory card with more free
space.
The memory card or internal memory is not
formatted.
Format the memory card or internal memory (pg. 85).
READ ERROR
The  le is corrupt or was not created with the
camera.
The  le can not be played back.
The memory card contacts require cleaning.
Clean the contacts with a soft, dry cloth. If the mes-
sage is repeated, format the memory card (pg. 85). If
the message persists, replace the memory card.
Camera malfunction. Contact a FUJIFILM dealer (pg. 108).
100
Warning Messages and Displays
Warning
Warning
Description
Description
Solution
Solution
FRAME NO. FULL
The camera has run out of frame numbers (cur-
rent frame number is 999-9999).
Format the memory card and select RENEW for the
B FRAME NO. option in the M SET-UP menu.
Take a picture to reset frame numbering to 100-0001,
then return to the B FRAME NO. menu and select
CONTINUOUS.
TOO MANY FRAMES
Date for which more than 4,999 pictures exist
selected in sort-by-date view.
Choose a di erent date.
F CAN NOT EXECUTE
Red-eye removal can not be applied to the se-
lected picture or movie.
m CAN NOT EXECUTE
PROTECTED FRAME
An attempt was made to delete or rotate a pro-
tected picture.
Remove protection before deleting or rotating pictures.
b NO IMAGE
The source device selected in the playback
E COPY menu contains no pictures.
Select a di erent source.
a NO IMAGE
a CAN NOT CROP An attempt was made to crop a a picture.
These pictures can not be cropped.
CAN NOT CROP
The picture selected for cropping is damaged
or was not created with the camera.
DPOF FILE ERROR
The DPOF print order on the current memory
card contains more than 999 images.
Copy the pictures to internal memory and create a new
print order.
CAN NOT SET DPOF The picture can not be printed using DPOF.
F CAN NOT SET DPOF
Movies can not be printed using DPOF.
CAN NOT ROTATE The picture can not be rotated.
F CAN NOT ROTATE
Movies can not be rotated.
101
Troubleshooting
Warning Messages and Displays
Warning
Warning
Description
Description
Solution
Solution
PRESS AND HOLD
THE DISP BUTTON TO
DEACTIVATE SILENT MODE
An attempt was made to choose a  ash mode
or adjust the volume with the camera in silent
mode.
Exit silent mode before choosing a  ash mode or ad-
justing the volume.
COMMUNICATION ERROR
A connection error occurred while pictures
were being printed or copied to a computer or
other device.
Con rm that the device is turned on and that the USB
cable is connected.
PRINTER ERROR
Printer out of paper or ink, or other printer er-
ror.
Check printer (see printer manual for details). To resume
printing, turn the printer o and then turn it back on.
PRINTER ERROR
RESUME?
Check printer (see printer manual for details). If printing
does not resume automatically, press MENU/OK to resume.
CAN NOT BE PRINTED
An attempt was made to print a movie, a pic-
ture not created with the camera, or a picture
in a format not supported by the printer.
Movies and some pictures created with other devices
can not be printed. If the picture was created with the
camera, check the printer manual to con rm that the
printer supports the JFIF-JPEG or Exif-JPEG format. If it
does not, the pictures can not be printed.
102
Appendix
Glossary
3D movie format: FUJIFILM has extended the generic Motion JPEG format to create an AVI movie  le format that
supports 3D. 3D movie  les have the extension “*.AVI” and can be played back on the camera in 3D with stereo
sound. When viewed in Windows Media Player, only the images recorded with the left lens will be displayed.
Digital zoom: Unlike optical zoom, digital zoom does not increase the amount of visible detail. Instead, details vis-
ible using optical zoom are simply enlarged, producing a slightly “grainy” image.
DPOF (Digital Print Order Format): A standard that allows pictures to be printed from “print orders” stored
in internal memory or on a memory card. The information in the order includes the pictures to be
printed and the number of copies of each picture.
EV (Exposure Value): The exposure value is determined by the sensitivity of the image sensor and the amount
of light that enters the camera while the image sensor is exposed. Each time the amount of light doubles, EV
increases by one; each time the amount of light is halved, EV decreases by one. The amount of light entering the
camera can be controlled by adjusting aperture and shutter speed.
Exif Print: A standard that allows information stored with pictures to be used for optimal color reproduction dur-
ing printing.
JPEG (Joint Photographic Experts Group): A compressed  le format for color images. The higher the compression
rate, the greater the loss of information and more noticeable drop in quality when the picture is displayed.
Motion JPEG: An AVI (Audio Video Interleave) format that stores sound and JPEG images in a single le. Motion JPEG
les can be viewed on a computer using Windows Media Player (requires DirectX 8.0 or later).
Multi-picture format: An image le format that allows multiple images to be stored in a single le. This camera
stores 3D images in multi-picture  les with the extension “*.MPO”. In the supplied FinePixViewer software, MPO
les are displayed as two JPEG images.
103
Appendix
Glossary
Parallax: Changes in the apparent position and orientation of a subject when viewed from di erent angles.
Point of convergence: The point where the optical axes of the two lenses intersect and parallax disappears.
Smear: A phenomenon speci c to CCDs which causes white streaks to appear when very bright light sources, such
as the sun or re ected sunlight, appear in the frame.
White balance: The human brain automatically adapts to changes in the color of light, with the result that objects
that appear white under one light source still appear white when the color of the light source changes. Digital
cameras can mimic this adjustment by processing images according to the color of the light source. This process
is known as “white balance.
104
Internal Memory/Memory Card Capacity
The following table shows the recording time or number of available frames at di erent image qualities
(the  gures for the number of available frames assume that MPO+JPEG is selected for
o
o 3DREC as
described on page 84; multiply these  gures by about 1.5 for MPO-only  les and by about 3 for 2D im-
ages). All  gures are approximate;  le size varies with the scene recorded, producing wide variations in
the number of  les that can be stored. The number of exposures or length remaining may not diminish
at an even rate.
O
O
4 : 3
4 : 3
O
O
3 : 2
3 : 2
P
P
4 : 3
4 : 3
Q
Q
4 : 3
4 : 3
C
C
movie
movie
D
D
movie
movie
FINE
FINE
NORMAL
NORMAL
FINE
FINE
NORMAL
NORMAL
FINE
FINE
NORMAL
NORMAL
FINE
FINE
NORMAL
NORMAL
a
a
b
b
a
a
b
b
Size
Size
(pixels)
(pixels) 3648 × 2736 3648 × 2432 2592 × 1944 2048 × 1536 640 × 480 320 × 240 640 × 480 320 × 240
File size
File size
MPO+JPEG
MPO+JPEG 14.7 MB 7.4 MB 13.1 MB 6.6 MB 7.5 MB 3.8 MB 4.7 MB 2.4 MB
MPO
MPO 9.8 MB 4.9 MB 8.7 MB 4.4 MB 5.0 MB 2.5 MB 3.1 MB 1.6 MB
JPEG
JPEG 4.9 MB 2.5 MB 4.4 MB 2.2 MB 2.5 MB 1.3 MB 1.6 MB 0.8 MB
Internal memory
Internal memory
(approx. 42 MB)
(approx. 42 MB)
2 5 3 6 5 11 8 17 36 sec. 1 min. 10 sec.
SD card
SD card
512 MB
512 MB 30 65 35 70 65 120 100 200 3 min. 7 min. 7 min. 13 min.
1 GB
1 GB 65 130 75 140 130 260 200 410 7 min. 14 min. 14 min. 27 min.
2 GB
2 GB 130 260 150 290 260 520 410 810 14 min. 28 min. 28 min. 54 min.
SDHC card
SDHC card
4 GB
4 GB 260 530 300 590 530 1040 830 1630 28 min.
*
56 min.
*
56 min.
*
108 min.
*
8 GB
8 GB 530 1070 600 1200 1060 2090 1680 3270 57 min.
*
113 min.
*
113 min.
*
215 min.
*
16 GB
16 GB 1070 2120 1200 2380 2110 4150 3330 6500 114 min.
*
224 min.
*
224 min.
*
433 min.
*
* Total length of all movie  les. Individual movies can not exceed 2 GB, regardless of capacity of memory card.
105
Appendix
Speci cations
System
Model FinePix REAL 3D W1
E ective pixels 10 million
CCD Two
1
/
2.3 -in. CCDs
Storage media Internal memory (approx. 42 MB) SD/SDHC memory cards (see page 7)
File system Compliant with Design Rule for Camera File System (DCF), Exif 2.2, multi-picture format (MPO), and
Digital Print Order Format (DPOF)
File format
Still pictures (C): MPO+JPEG or MPO Still pictures (D): Exif 2.2 JPEG (compressed)
Movies (C): Stereo AVI with 2 image channels Movies (D): Motion JPEG AVI
Image size (pixels)
O 4 : 3: 3,648 × 2,736 O 3 : 2: 3,348 × 2,432
P 4 : 3: 2,592 × 1,944 Q 4 : 3: 2,048 × 1,536
File size See page 104
Lens Two Fujinon 3 × optical zoom lenses, F/3.7 (wide angle) – 4.2 (telephoto)
Focal length f=6.3 mm18.9 mm (35-mm format equivalent: 35 mm–105 mm)
Zoom
C/B: Combined optical and digital zoom up to approx. 3.8 × (35-mm format equivalent: 39 mm149 mm)
A: 3 × optical zoom
D: 3 × optical zoom with up to approx. 5.7 × digital zoom (maximum combined zoom approx. 17.1 ×)
Digital zoom Approx. 5.7 × (up to 17.1 × when combined with optical zoom)
Aperture F3.7/F5/F8 (wide angle), F4.2/F5.6/F9 (telephoto)
Focus range (distance from
front of lens)
Approx. 60 cm (2.0 ft.)–in nity
Macro (D): Approx. 8 cm–80 cm/0.3 ft.–2.6 ft. (wide angle); 60 cm–3 m/2.0 ft.–9.8 ft. (telephoto)
Quick AF: Approx. 1 m (3.3 ft.)–in nity
Point of convergence (C)
Approx. 2 m/6.6 ft. (
wide angle
); 6.5 m/21.3 ft. (
telephoto
) (pg. 102)
Recommended shooting
distance (C)
Auto parallax o : Approx. 1.3 m/4.3 ft.
–in nity
(
wide angle; point of convergence at 2 m/6.6 ft.
); 4.1 m/13.5 ft.
–in nity
(
telephoto; point of convergence at 6.5 m/21.3 ft.
)
Auto parallax on (as measured by FUJIFILM): Approx. 1 m/3.3 ft.
–in nity
(
wide angle
); 2 m/6.6 ft.
–in nity
(
telephoto
)
106
Speci cations
System
Sensitivity Standard output sensitivity equivalent to ISO 100, 200, 400, 800, 1600; AUTO
Metering 256-segment through-the-lens (TTL) metering; MULTI, SPOT, AVERAGE
Exposure control Program and aperture-priority autoexposure; manual exposure
Exposure compensation 2 EV – +2 EV in increments of
1
/
3 EV (P and A modes)
Scene modes
C (NATURAL AND FLASH LIGHTING; in C mode, images are recorded at size Q), D (NATURAL LIGHT),
L (PORTRAIT), M (LANDSCAPE), N (SPORT), O (NIGHT), H (NIGHT TRIPOD), Q (SUNSET),
R (SNOW), S (BEACH), F (UNDERWATER), U (PARTY), E (ANTI-BLUR)
Picture stabilization None
Intelligent Face Detection
Available (D only)
Shutter speed
O:
1
/
8 s–
1
/
500 s• H: 3 s–
1
/
500 s
M:
1
/
2 s–
1
/
1,000 s• Other modes:
1
/
4 s–
1
/
1,000 s
Continuous
I (C): Up to 2 fps (size Q); max. 40 frames I (D): Up to 1 fps; max. 40 frames
J (D): Up to 3 fps (size Q); max. 40 frames
Focus Mode: Single AF Autofocus system: Contrast-detect TTL AF
Focus-area selection (Intelligent Face Detection o ): Center (C/D), auto-area (D)
White balance Auto; seven manual preset modes for direct sunlight, shade, daylight  uorescent, warm white  uo-
rescent, cool white  uorescent, incandescent, and underwater lighting
Self-timer O , 2 sec., 10 sec.
Flash Auto  ash; e ective range when sensitivity is set to AUTO is approx. 60 cm–3.7 m/2 ft.–12.1 ft. (wide an-
gle), 60 cm–3.3 m/2 ft.10.8 ft. (telephoto), or in macro mode (D only) 30 cm–80 cm/1 ft.–2.6 ft. (wide angle),
60 cm1.6 m/2 ft.–5.2 ft. (telephoto)
Flash modes Auto,  ll  ash, o , slow sync (red-eye removal o ); auto with red-eye removal,  ll  ash with red-eye re-
moval, o , slow sync with red-eye removal (red-eye removal on)
Monitor 2.8-in., 230k-dot color LCD monitor; frame coverage approx. 100%
Movies Frame size 640 × 480 (memory card only) or 320 × 240 pixels; 30 fps; stereo sound; zoom not available
107
Appendix
Speci cations
System
Shooting options
C: Auto parallax, power management, framing guide, and frame number memory
D: Intelligent Face Detection with red-eye removal, power management, framing guide, and frame
number memory
Playback options
C: Parallax adjustment, micro thumbnails, multi-frame playback, sort-by-date, cropping, resize, and
slide show
D: Intelligent Face Detection, red-eye removal, micro thumbnails, multi-frame playback, sort-by-
date, cropping, resize, slide show, and image rotation
Other options PictBridge, Exif Print, language selection (Simplified Chinese, Traditional Chinese, Dutch, English,
French, German, Italian, Japanese, Korean, Portuguese, Spanish, and Thai), time difference, silent
mode
Input/output terminals
A/V OUT (audio/video output) 8-pin multi-connector for NTSC or PAL output with monaural sound
Digital input/output USB 2.0 High Speed (shares A/V OUT connector); PTP (Picture Transfer Protocol)/MTP (Media Transfer Protocol)
DC IN For use exclusively with supplied AC-5VC AC power adapter
Power supply/other
Power supply NP-95 rechargeable battery; AC-5VC AC power adapter; charges in about 4 hours at +23 °C (73 °F)
Guide to the number of
available frames for battery
operation
Battery Type
Battery Type
Number of frames
Number of frames
NP-95
Approx. 230 frames (C A)
CIPA standard, measured using battery supplied with camera and SD memory card.
Note: Number of shots that can be taken with battery varies with battery charge level and will de-
cline at low temperatures.
Camera dimensions (W × H × D)
123.6 mm × 68 mm × 25.6 mm/4.9 in. × 2.7 in. × 1.0 in., excluding projections
Camera weight Approx. 260 g/9.2 oz., excluding batteries, accessories, and memory cards
Shooting weight Approx. 300 g/10.6 oz., including batteries and memory card
Operating conditions Temperature: 0 °C to +40 °C (+32 °F to +104 °F) Humidity: 80% or less (no condensation)
108
Speci cations
NP-95 rechargeable battery
Nominal voltage DC 3.6 V (typ.)
Nominal capacity 1800 mAh
Operating temperature 0 °C – +40 °C/+32 °F – +104 °F
Dimensions (W × H × D) 49.5 mm × 35.2 mm × 10.8 mm/1.9 in. × 1.4 in. × 0.4 in.
Weight Approx. 39 g/1.4 oz.
Weight and dimensions vary with the country or region of sale.
Color Television Systems
NTSC (National Television System Committee) is a color television telecasting speci cation adopted mainly in
the U.S.A., Canada, and Japan. PAL (Phase Alternation by Line) is a color television system adopted mainly in
European countries and China.
Notices
Speci cations subject to change without notice. FUJIFILM shall not be held liable for damages resulting from
errors in this manual.
• Although the monitor is manufactured using advanced high-precision technology, small bright points and
anomalous colors (particularly in the vicinity of text) may appear. This is normal for this type of monitor and
does not indicate a malfunction; images recorded with the camera are una ected.
Digital cameras may malfunction when exposed to strong radio interference (e.g., electric  elds, static electric-
ity, or line noise).
Due to the type of lens used, some distortion may occur at the periphery of images. This is normal.
109
Appendix
FUJIFILM Digital Camera Worldwide Network
Contact your local distributor (see list below) for repairs and technical support. Please present the war-
ranty and purchase receipt when requesting repairs; refer to the warranty card for the conditions of the
warranty. Technical support may not be available for models not handled by the local distributor. The
following information is subject to change without notice.
NORTH AMERICA
Canada FUJIFILM Canada Inc. Technical support TEL 1-866-818-FUJI (3854) http://www.fujihelp.ca
Repair service TEL 1-800-263-5018 http://www.fujihelp.ca
U.S.A. FUJIFILM U.S.A., Inc. Technical support TEL 800-800-3854 digitalinfo@fujifilm.com
Repair service TEL 800-659-3854
CENTRAL AND SOUTH AMERICA
Argentina Imagen e informacion S.A. Technical support & repairs
TEL +54-11-4836-1000 servtec@imageneinformacion.com.ar
Bolivia Reifschneider Bolivia Ltda. Technical support & repairs TEL +591 33 44 1129 gciagral@bibosi.scz.entelnet.bo
Brazil FUJIFILM do Brasil Ltda. Technical support & repairs TEL 0800-12-8600 camarasdigitais@fujifilm.com.br
Chile Reifschneider SA Technical support & repairs TEL 56-2-6781200 serviciotecnico@reifschneider.cl
Colombia Animex de Colombia Ltda. Technical support & repairs TEL +57 1 338-0299 animex@etb.net.co
Ecuador Espacri Cia Ltda Technical support & repairs TEL 593-72-835526
Importaciones Espacri Cia. Ltda.
Technical support & repairs TEL +593 783 5526 portiz@fujifilm.com.ec
Mexico Fuji lm de Mexico, S.A. de C.V. Technical support TEL (52-55) 5263-55000 eizquierdo@fujifilm.com.mx
Repair service TEL (52-55) 5366-5150/56/57 cpalma@fujifilm.com.mx
Paraguay Errece S.R.L. Technical support & repairs TEL +595 21 444256 jmarbulo@fujifilm.com.py
Peru Procesos de Color S.A. Technical support & repairs TEL +51 14 33 5563 jalvarado@fujifilm.com.pe
Uruguay Fotocamara S.R.L. Technical support & repairs TEL +598-2-9002004 fotocam@adinet.com.uy
Kiel S.A. Technical support & repairs TEL (05982) 419 4542 kiel@fujifilm.com.uy
Venezuela C. Hellmund & Cia Sa Technical support & repairs TEL 0212-2022300 hellmund@hellmund.com
EUROPE
Austria Fuji Film Oesterreich Technical support & repairs TEL 0043 1 6162606/51 or 52 kamera.service@fujifilm.at
Belgium Belgian Fuji Agency Technical support & repairs TEL 3210242090 info@fuji.be
Croatia I&I d.o.o. Technical support TEL 38512319060 dsaravanja@fujifilm.hr
Repair service TEL 38512316228 info@fujifilm.hr
110
EUROPE
Cyprus PMS IMAGING LTD Technical support & repairs TEL 35722746746 mariosashiotis@fujifilm.com.cy
Doros Neophytou
CAMERA REPAIRS
Technical support & repairs TEL 35722314719 dorosn@logosnet.cy.net
Czech Republic Fuji lm Cz., s.r.o. Technical support TEL 00420 234 703 411 petr.barta@fujifilm.cz
AWH servis Repair service TEL 00420 222 721 525 awh@awh.cz
Denmark Fuji lm Danmark A/S Technical support & repairs TEL 0045 45662244 fujifilm@fujifilm.dk
Finland Fuji Finland Oy Technical support & repairs TEL +358 9 825951 www.fuji.fi fuji@fuji.fi
France FUJIFILM France Technical support & repairs direction.technique@pm2s.fr
Germany FUJIFILM Electronic Imaging Europe
GmbH
Technical support & repairs Tel 0180 / 589 89 80
*
service@fujifilm-digital.com
*
0,14 EUR pro Minute aus dem deutschen Festnetz, abweichende
Preise aus Mobilfunknetzen möglich,Stand bei Drucklegung.
Greece FUJIFILM HELLAS S.A. Technical support & repairs TEL 0030 210 9404100 fujifilm@fujifilm.gr
Hungary Fuji lm Hungary Ltd. Technical support TEL 3612389410 fujifilm@fujifilm.hu
Repair service TEL 3613633777
Iceland Icephoto (Ljosmyndavorur) Technical support & repairs TEL 354 568 0450 framkollun@fujifilm.is
Italy FujiFilm Italia S.r.l. Call center TEL 039-0267978181 info@fujifilm.it
Repair service TEL 039-6058294 FAX 039-6058295
Lithuania Fuji lm Lithuania Technical support & repairs TEL 370-5-2130121 info@fujifilm.lt
Malta Ciancio (1913) Co.Ltd. Technical support & repairs TEL 0356-21-480500 info@fujifilm.com.mt
Norway Fuji lm Norge AS Technical support TEL 0047-02273
http://www.fujifilm.no/ mailto:post@fujifilm.no
Repair service TEL 0047-55393880
http://www.camera.no/mailto:service@camera.no
Poland Fuji lm Polska Distribution Sp.
z o.o.
Technical support TEL +48-22-517-66-00 fujifilm@fujifilm.pl
Repair service TEL +48-22-886-94-40 serwis@fujifilm.pl
Portugal Fuji lm Portugal, Lda Technical support TEL (351) 226 194 237 finepix@fujifilm.pt
Repair service TEL (351) 226 194 200 cameras@fujifilm.pt
Romania CTS-Cardinal Top Systems Ltd Technical support & repairs TEL 4021-230-09-82 cts_tirla@hotmail.com
Russia Fuji lm Electronic Imaging Europe
GmbH
Technical support & repairs TEL 8 800 200 3854 (Для бесплатных звонков из России)
*
Для звонков из других стран набирайте +7 800 200 3854
http://www.fujifilm-digital.ru/ info@fujifilm-digital.ru
Slovakia Fuji lm Slovakia s.r.o. Technical support TEL 00421 2 33 595 107 fujifilm@fujifilm.sk
Repair service TEL 00421 2 33 595 119 servis@fujifilm.sk
Spain Fuji lm España S.A. Technical support & repairs TEL 902012535
http://www.fujifilm.es/soporte/ tallersat@fujifilm.es
111
Appendix
EUROPE
Sweden Fuji lm Sverige AB Technical support TEL 46 8 506 141 45 kamera@fujifilm.se
Repair service TEL 46 8 506 141 00 kameraverkstaden@fujifilm.se
Switzerland /
Liechtenstein
Fuji lm (Switzerland) AG Technical support & repairs TEL +41 44 855 5154 RepairCenter@fujifilm.ch
The Netherlands FUJIFILM Electronic Imaging
Nederland
Technical support TEL +31(0)102812500 helpdesk@fujifilm-digital.nl
Repair service TEL +31(0)102812520 camerareparaties@fujifilm-digital.nl
Turkey Fuji lm Turkiye Sinfo A.S. Technical support TEL +90 212 696 5090 csarp@fujifilm.com.tr
Repair service TEL +90 212 696 5090 servis@fujifilm.com.tr
U.K. FUJIFILM UK Ltd. Technical support TEL +44 (0)8700 841310 fujitec@fuji.co.uk
Repair service TEL +44 (0)8700 841314 fujitec@fuji.co.uk
Ukraine Image Ukraine CJSC Technical support & repairs TEL +380-44-4909075 d@fujifilm.ua
MIDDLE EAST
Iran Tehran Fuka Co. Technical support & repairs TEL (+98-21)2254810-19 fuka@neda.net
Israel Shimone Group Ltd. Technical support TEL (+) 972 3 9250666 digital@fujifilm.co.il
Repair service TEL (+) 972 3 9250666 khaim@shimone.com
Jordan Grand Stores Al- Abdali,
Amman / Jordan
Technical support & repairs TEL 009626-4646387 gstores@go.com.jo
Lebanon Fototek S.A.R.L. Technical support & repairs TEL +961 1 252474 fototek@antakiholding.com
Qatar Techno Blue Technical support TEL 00974 44 66 175 prabu@techno-blue.com
Saudi Arabia Emam Distribution Co. Ltd. Technical support TEL 96626978756 service@fujifilm.com.sa
Syria Film Trading Company Technical support TEL + 963 11 2218049 f.t.c@Net.SY
Repair service TEL + 963 21 4641903 filmtradin@Net.SY
U.A.E. Grand Stores Technical support & repairs TEL + 971-4-2823700 photography@grandstores.ae
Yemen Al-Haidary Trading Technical support TEL 00967-1-503980
Repair service TEL 00967-1-503977
AFRICA
Egypt Foto Express Egypt Technical support & repairs TEL (202) 7762062 fotoegypt@access.com.eg
Kenya Fuji Kenya Ltd Repair service TEL (254-20)4446265-8 info@fujifilm.co.ke
South Africa Cameratek CC. Technical support & repairs TEL +27 11 251 2400 www.cameratek.co.za
OCEANIA
Australia FUJIFILM Australia Pty Ltd Technical support & repairs TEL 1800 226 355 digital@fujifilm.com.au
Fiji Brijlal & Co. Ltd Technical support & repairs TEL (679)3304133 kapadia@connect.com.fj
New Caledonia Phocidis SARL Technical support & repairs TEL (00 687) 25-46-35 phocidis@phocidis.nc
112
OCEANIA
New Zealand Fuji lm NZ Ltd Technical support & repairs TEL +64-9-4140400 glenn.beaumont@fujifilm.co.nz
Papua New
Guinea
Oceania PNG Limited Technical support TEL +675 3256411 oceania@daltron.com.pg
ASIA
Hong Kong Fuji Photo Products Co., Ltd. Technical support & repairs TEL (852)2406 3287 rsd@chinahkphoto.com.hk
Indonesia PT. Modern Internasional, Tbk. Technical support & repairs TEL +62 021 45867187 assd_kmrsrv@modernphoto.co.id
Malaysia FUJIFILM (Malaysia) Sdn. Bhd. Technical support TEL 603-55698388 technical@fujifilm.com.my
Repair service TEL 603-55698388 camera@fujifilm.com.my
Philippines YKL Development & Trdg. Corp. Technical support TEL 632-7436601~06
info@yklcolor.com digital@yklcolor.com
Repair service TEL 632-7436601~06 techop_services@yklcolor.com
Singapore FUJIFILM (Singapore) Pte Ltd Technical support & repairs TEL 65-6380 5557 service@fujifilm.com.sg
South Korea Korea Fuji lm Co., Ltd. Technical support TEL +82-2-3282-7363 photo@fujifilm.co.kr
Yonsan AS Center (Fujidigital) Repair service TEL +82-2-701-1472 1bowl@hanmail.net
Kangnam AS Center (Digitalgallery) Repair service TEL +82-2-2203-1472 nurijili@hanmail.net
Busan AS Center (Digital-Sewon) Repair service TEL +82-51-806-1472 merahan@yahoo.co.kr
Taiwan Hung Chong Corp. Technical support & repairs TEL 886-2-6602-8988 dah@mail.hungchong.com.tw
Thailand FUJIFILM (Thailand) Ltd. Technical support TEL +662-2706000 ext. 751,752
Dusit_Suriyong@fujifilm.co.th yaowarat@fujifilm.co.th
Repair service TEL +662-2706000 ext.761,762 warin@fujifilm.co.th
Vietnam International Minh Viet Co., Ltd. Technical support & repairs TEL +84-8-4135740 ext. 322 diep.phanthithanh@imv.com.vn
113
Memo
7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN
http://www.fujifilm.com/products/digital_cameras/index.html
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujifilm finepix real 3d w1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm finepix real 3d w1 in the language / languages: English as an attachment in your email.

The manual is 2,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fujifilm finepix real 3d w1

Fujifilm finepix real 3d w1 User Manual - German - 128 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info