101571
36
Zoom out
Zoom in
Previous page
1/45
Next page
71
Connection
6
70
CONNECTING TO A TV/CONNECTING TO A COMPUTER
A/V OUT
(audio/visual output)
socket
Video(yellow)
Audio(white)
To terminals
1
2
Connecting to a computer
6 Connection
Connecting to a TV
Switch off the camera and TV. Plug the A/V
cable (provided with the camera) into the A/V
OUT (audio/visual output) socket.
!
If there is a power outlet available, connect the
AC-5VHS/AC-5VS AC Power Adapter.
Plug the other end of the cable into the video
input socket on the TV. Then switch the camera
and TV on and take pictures or play back
images as you would normally.
!
Refer to the instructions provided with your TV for more
information on video input for your TV.
This section gives an overview of the functions that can be used with a USB connection and
describes the connection method. Refer to the Software Quick Start Guide booklet for
details.
The first time you connect the
camera to your computer
You must install all the software before
connecting the camera to your computer.
Refer also to the Software Quick Start Guide
booklet.
DSC
(
Mass storage device
)
Mode
This mode provides a simple way to read
images from a media and store images on to
a media (P.72).
PC CAM
(
camera
)
Mode
This function allows you to conduct
videoconferencing sessions between PCs
connected to the Internet (P.73).
!
Videoconferencing (PictureHello) is not
supported on Macintosh computers.
1
2
3
CD-ROM
(Software for FinePix SX) Software Quick Start Guide
SET–UP
SETSET CANCELCANCEL
BACKBACK
OKOK
SET−UPSET−UP
IMAGE DISPLAYIMAGE DISPLAY
POSTVIEWPOSTVIEW
POWER SAVEPOWER SAVE
2 MIN2 MIN
DSCDSC
SETSET
HIGHHIGH
USB MODEUSB MODE
DATE/TIMEDATE/TIME
SOUNDSOUND
MEDIAMEDIA
When this function is enabled, the screen
temporarily switches off (sleeps) to save power if
the camera is not used for approx. 30 seconds.
If the camera remains unused for an additional
interval (2 minutes or 5 minutes), it is
automatically switched off. Use this function
when you want to get the maximum possible
running time from your battery.
!
The Power Save function is disabled during Auto Play
and when a USB connection is being used.
POWER SAVE SETTING
Sleep does not function in Preview, Setup or Playback mode, but the camera will still switch
itself off automatically if it is left unused for some time (2 minutes or 5 minutes).
When the camera is in sleep mode, pressing the
shutter button down halfway wakes the camera
up so that it is ready to take pictures. This is
useful since the camera can be ready to take
pictures almost instantly.
!
You can wake the camera up by pressing any other
button as well as the shutter button.
If the Auto Power Off function has switched the
camera off (after 2 minutes or 5 minutes) press
the POWER button.
Switching the Camera Back On
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujifilm Finepix M 603 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm Finepix M 603 in the language / languages: English as an attachment in your email.

The manual is 4,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info