Manual Fujifilm Finepix JZ700 series (page 3 of 118) (English)

516092

Zoom out

Zoom in

1/118

iii

For Your Safety

Antennas

Outdoor Antenna Grounding: If an outside

antenna or cable system is connected to the

video product, be sure the antenna or cable

system is grounded so as to provide some

protection against voltage surges and built-

up static charges. Section 810 of the National

Electrical Code, ANSI/NFPA No. 70, provides

information with respect to proper ground-

ing of the mast and supporting structure,

grounding of the lead-in wire to an antenna

discharge unit, size of grounding conductors,

location of antenna discharge unit, connec-

tion to grounding electrodes, and require-

ments for the grounding electrode.

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

Antenna Lead

in Wire

Ground Clamp

Grounding

Conductors

(NEC SECTION

810-21)

Power Service Grounding

Electrode System (NEC ART

250. PART H)

Antenna

Discharge Unit

(NEC SECTION

810-20)

Electric Service

Equipment

Ground Clamps

Power Lines: An outside antenna system

should not be located in the vicinity of over-

head power lines or other electric light or

power circuits, or where it can fall into such

power lines or circuits. When installing an

outside antenna system, extreme care should

be taken to keep from touching such power

lines or circuits as contact with them might

be fatal.

Use

Cleaning: Unplug this video product from the

wall outlet before cleaning. Do not use liq-

uid cleaners or aerosol cleaners. Use a damp

cloth for cleaning.

Object and Liquid Entry: Never push objects

of any kind into this video product through

openings as they may touch dangerous volt-

age points or short out parts that could result

in a fire or electric shock. Never spill liquid of

any kind on the video product.

Lightning: For added protection for this video

product receiver during a lightning storm, or

when it is left unattended and unused for

long periods of time, unplug it from the wall

outlet and disconnect the antenna or cable

system. This will prevent damage to the

video product due to lightning and power-

line surges.

Service

Servicing: Do not attempt to service this video

product yourself as opening or removing cov-

ers may expose you to dangerous voltage or

other hazards. Refer all servicing to qualified

service personnel.

Damage Requiring Service: Unplug this video

product from the wall outlet and refer servic-

ing to qualified service personnel under the

following conditions:

• When the power-supply cord or plug is

damaged.

• If liquid has been spilled, or objects have

fallen into the video product.

• If the video product has been exposed to

rain or water.

• If the video product has been dropped or

the cabinet has been damaged.

If the video product does not operate nor-

mally follow the operating instructions. Ad-

just only those controls that are covered by

the operating instructions as an improper

adjustment of other controls may result in

damage and will often require extensive work

by a qualified technician to restore the video

product to its normal operation.

When the video product exhibits a distinct

change in performance—this indicates a

need for service.

Replacement Parts: When replacement parts

are required, be sure the service technician

has used replacement parts specified by the

manufacturer or have the same characteris-

tics as the original part. Unauthorized sub-

stitutions may result in fire, electric shock or

other hazards.

Safety Check: Upon completion of any service

or repairs to this video product, ask the ser-

vice technician to perform safety checks to

determine that the video product is in proper

operating condition.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm Finepix JZ700 series in the language / languages: English as an attachment in your email.

The manual is 2,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fujifilm Finepix JZ700 series Manual

Product: