101551
14
Zoom out
Zoom in
Previous page
1/65
Next page
27
Using the Camera
2
26
Press the Zoom buttons to zoom in and out.
The digital zoom can be used with other than the
T” and “” quality settings.
When zooming changes between optical and
digital, the position of the “” indicator stops. Press
the same Zoom button again to start the “
indicator moving again.
!
See P.53 for information on changing the quality setting.
!
If the shot goes out of focus during zooming, hold the shutter
button down halfway to refocus the shot.
Optical
zoom
Digital
zoom
Optical
zoom
Digital
zoom
Zoom bar display (WIDE)
Zoom bar display (STD)
The position of the “ ” indicator on the
zoom bar shows the zooming status.
The area to the right of the separator
indicates digital zooming, while the area to
the left indicates optical zooming.
h Optical zoom focal length (STD)
Approx. 32.5 mm-130 mm, max. zoom scale: 4×
h Digital zoom focal lengths (STD)
5: approx. 130 mm-182 mm,
max. zoom scale: approx. 1.4×
3: approx. 130 mm-260 mm,
max. zoom scale: approx. 2.0×
2: approx. 130 mm-325 mm,
max. zoom scale: approx. 2.5×
`: approx. 130 mm-819 mm,
max. zoom scale: approx. 6.3×
h Optical zoom focal length (WIDE)
Approx. 35.5 mm-142 mm, max. zoom scale: 4×
h Digital zoom focal lengths (WIDE)
µ: approx. 142 mm-170 mm,
max. zoom scale: approx. 1.2×
£: approx. 142 mm-241 mm,
max. zoom scale: approx. 1.7×
: approx. 142 mm-270 mm,
max. zoom scale: approx. 1.9×
E: approx. 142 mm-738 mm,
max. zoom scale: approx. 5.2×
35 mm camera equivalents
Zoom button
USING THE ZOOM
(
OPTICAL ZOOM/DIGITAL ZOOM
)
Click
Bebeep
Move the camera slightly so that one of the
subjects is in the AF frame.
2
Press the shutter button down halfway (AF/AE
lock). When a short double-beep is heard, the
camera focuses on your subject. The AF frame on
the LCD monitor becomes smaller and the camera
sets the shutter speed and aperture. The viewfinder
lamp (green) changes from blinking to lit.
3
Continue to hold the shutter button down halfway.
Move the camera back to the original image and
press the shutter button fully.
!
AF/AE lock can be applied repeatedly before the shutter is
released.
!
Use AF/AE lock in all Photography modes to make sure
excellent results.
4
In this shot, the subjects (two people in this case)
are not in the AF frame. Taking the picture at this
point will result in the subjects being out of focus.
1
AUTOAUTO
  10
AUTOAUTO
   
 25
F5.
 25
F5.
USING AF/AE LOCK
AF (Autofocus)/AE (Auto-exposure) lock
On the FinePix F810, pressing the shutter button down half way fixes the focus and exposure settings
(AF/AE lock). To focus on a subject that is off to one side or to set the exposure before composing the
final shot, locks the AF and AE settings. Then compose and take the picture to get the best results.
TAKING PICTURES
(
B AUTO MODE
)
PHOTOGRAPHY MODE
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujifilm Finepix F810 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm Finepix F810 in the language / languages: English as an attachment in your email.

The manual is 6,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info