510431
142
Zoom out
Zoom in
Previous page
1/164
Next page
FINEPIX F770EXR
FINEPIX F750EXR
DIGITAL CAMERA
Owner’s Manual
Thank you for your purchase
of this product. This manual
describes how to use your
FUJIFILM digital camera and the
supplied software. Be sure that
you have read and understood
its contents and the warnings in
“For Your Safety (P ii) before us-
ing the camera.
For information on related products, visit our website at
http://www.fujifilm.com/products/digital_cameras/index.html
EN
Before You Begin
First Steps
Basic Photography and Playback
More on Photography
More on Playback
GPS
Movies
Connections
Menus
Technical Notes
Troubleshooting
BL01622-200
Appendix
ii
For Your Safety
For Your Safety
Read Instructions: All the safety and operat-
ing instructions should be read before the
appliance is operated.
Retain Instructions: The safety and operating
instructions should be retained for future
reference.
Heed Warnings: All warnings on the ap-
pliance and in the operating instructions
should be adhered to.
Follow Instructions: All operating and use
instructions should be followed.
Installation
Installation
Power Sources: This video product should be
operated only from the type of power source
indicated on the marking label. If you are
not sure of the type of power supply to your
home, consult your appliance dealer or local
power company. For video products intend-
ed to operate from battery power, or other
sources, refer to the operating instructions.
Grounding or Polarization: This video product
is equipped with a polarized alternating-
current line plug (a plug having one blade
wider than the other). This plug will fi t into
the power outlet only one way. This is a safety
feature. If you are unable to insert the plug
fully into the outlet, try reversing the plug. If
the plug should still fail to fi t, contact your
electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the po-
larized plug.
Alternate Warnings: This video product is
equipped with a three-wire grounding-type
plug, a plug having a third (grounding) pin.
This plug will only fi t into a grounding-type
power outlet. This is a safety feature. If you
are unable to insert the plug into the outlet,
contact your electrician to replace your obso-
lete outlet. Do not defeat the safety purpose
of the grounding type plug.
Overloading: Do not overload wall outlets and
extension cords as this can result in a risk of
re or electric shock.
Ventilation: Slots and openings in the cabinet
are provided for ventilation, to ensure reliable
operation of the video product and to pro-
tect it from overheating, and these openings
must not be blocked or covered. The open-
ings should never be blocked by placing the
video product on a bed, sofa, rug, or other
similar surface.
This video product should not be placed in a
built-in installation such as a bookcase or rack
unless proper ventilation is provided or the
manufacturer’s instructions have been ad-
hered to. This video product should never be
placed near or over a radiator or heat register.
Attachments: Do not use attachments not
recommended by the video product manu-
facturer as they may cause hazards.
Water and Moisture: Do not use this video
product near water—for example, near a
bath tub, wash bowl, kitchen sink, or laundry
tub, in a wet basement, or near a swimming
pool, and the like.
Power-Cord Protection: Power-supply cords
should be routed so that they are not likely
to be walked on or pinched by items placed
upon or against them, paying particular
attention to cords at plugs, convenience re-
ceptacles, and the point where they exit from
the appliance.
Accessories: Do not place this video product
on an unstable cart, stand, tripod, bracket, or
table. The video product may fall, causing
serious injury to a child or adult, and serious
damage to the appliance. Use only with a
cart, stand, tripod, bracket, or table recom-
mended by the manufacturer, or sold with
the video product. Any mounting of the ap-
pliance should follow the manufacturer’s in-
structions, and should use a mounting acces-
sory recommended by the manufacturer.
An appliance and cart
combination should
be moved with care.
Quick stops, exces-
sive force, and uneven
surfaces may cause
the appliance and cart
combination to overturn.
IMPORTANT SAFETY INSTRUCTIONS
iii
For Your Safety
Antennas
Antennas
Outdoor Antenna Grounding: If an outside
antenna or cable system is connected to the
video product, be sure the antenna or cable
system is grounded so as to provide some
protection against voltage surges and built-
up static charges. Section 810 of the National
Electrical Code, ANSI/NFPA No. 70, provides
information with respect to proper ground-
ing of the mast and supporting structure,
grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors,
location of antenna discharge unit, connec-
tion to grounding electrodes, and require-
ments for the grounding electrode.
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
Antenna Lead
in Wire
Ground Clamp
Grounding
Conductors
(NEC SECTION
810-21)
Power Service Grounding
Electrode System (NEC ART
250. PART H)
Antenna
Discharge Unit
(NEC SECTION
810-20)
Electric Service
Equipment
Ground Clamps
Power Lines: An outside antenna system
should not be located in the vicinity of over-
head power lines or other electric light or
power circuits, or where it can fall into such
power lines or circuits. When installing an
outside antenna system, extreme care should
be taken to keep from touching such power
lines or circuits as contact with them might
be fatal.
Use
Use
Cleaning: Unplug this video product from the
wall outlet before cleaning. Do not use liq-
uid cleaners or aerosol cleaners. Use a damp
cloth for cleaning.
Object and Liquid Entry: Never push objects
of any kind into this video product through
openings as they may touch dangerous volt-
age points or short out parts that could result
in a fi re or electric shock. Never spill liquid of
any kind on the video product.
Lightning: For added protection for this video
product receiver during a lightning storm, or
when it is left unattended and unused for
long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable
system. This will prevent damage to the vid-
eo product due to lightning and power-line
surges.
Service
Service
Servicing: Do not attempt to service this video
product yourself as opening or removing cov-
ers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualifi ed
service personnel.
Damage Requiring Service: Unplug this video
product from the wall outlet and refer servic-
ing to qualifi ed service personnel under the
following conditions:
When the power-supply cord or plug is
damaged.
• If liquid has been spilled, or objects have
fallen into the video product.
• If the video product has been exposed to
rain or water.
• If the video product has been dropped or
the cabinet has been damaged.
If the video product does not operate nor-
mally follow the operating instructions. Ad-
just only those controls that are covered by
the operating instructions as an improper
adjustment of other controls may result in
damage and will often require extensive work
by a qualifi ed technician to restore the video
product to its normal operation.
When the video product exhibits a distinct
change in performance—this indicates a
need for service.
Replacement Parts: When replacement parts
are required, be sure the service technician
has used replacement parts specifi ed by the
manufacturer or have the same characteris-
tics as the original part. Unauthorized sub-
stitutions may result in fi re, electric shock or
other hazards.
Safety Check: Upon completion of any service
or repairs to this video product, ask the ser-
vice technician to perform safety checks to
determine that the video product is in proper
operating condition.
iv
For Your Safety
Be sure to read these notes before use
Safety Notes
• Make sure that you use your camera correctly. Read these safety
notes and your Owner’s Manual carefully before use.
After reading these safety notes, store them in a safe place.
About the Icons
The icons shown below are used in this document to indicate the
severity of the injury or damage that can result if the information
indicated by the icon is ignored and the product is used incorrectly
as a result.
WARNING
This icon indicates that death or serious injury can result if the
information is ignored.
CAUTION
This icon indicates that personal injury or material damage can
result if the information is ignored.
The icons shown below are used to indicate the nature of the instruc-
tions which are to be observed.
Triangular icons tell you that this information requires atten-
tion (“Important”).
Circular icons with a diagonal bar tell you that the action indi-
cated is prohibited (“Prohibited”).
Filled circles with an exclamation mark indicate an action that
must be performed (“Required”).
WARNING
WARNING
Unplug from
power socket
If a problem arises, turn the camera o , remove the battery, and
disconnect and unplug the AC power adapter. Continued use of
the camera when it is emitting smoke, is emitting any unusual
odor, or is in any other abnormal state can cause a fi re or elec-
tric shock. Contact your FUJIFILM dealer.
Avoid exposure
to water
Do not allow water or foreign objects to enter the camera. If water
or foreign objects get inside the camera, turn the camera off ,
remove the battery, and disconnect and unplug the AC power
adapter. Continued use of the camera can cause a fi re or elec-
tric shock. Contact your FUJIFILM dealer.
WARNING
WARNING
Do not use in
the bathroom or
shower
Do not use the camera in the bathroom or shower. This can cause
a fi re or electric shock.
Do not
disassemble
Never attempt to change or take apart the camera (never open
the case). Failure to observe this precaution can cause fi re or
electric shock.
Do not touch
internal parts
Should the case break open as the result of a fall or other accident,
do not touch the exposed parts. Failure to observe this precau-
tion could result in electric shock or in injury from touching the
damaged parts. Remove the battery immediately, taking care
to avoid injury or electric shock, and take the product to the
point of purchase for consultation.
Do not change, heat or unduly twist or pull the connection cord and
do not place heavy objects on the connection cord. These actions
could damage the cord and cause a fi re or electric shock. If the
cord is damaged, contact your FUJIFILM dealer.
Do not place the camera on an unstable surface. This can cause the
camera to fall or tip over and cause injury.
Never attempt to take pictures while in motion. Do not use the
camera while you are walking or driving a vehicle. This can re-
sult in you falling down or being involved in a traffi c accident.
Do not touch any metal parts of the camera during a thunderstorm.
This can cause an electric shock due to induced current from
the lightning discharge.
Do not use the battery except as speci ed. Load the battery as
shown by the indicator.
Do not heat, change or take apart the battery. Do not drop or subject
the battery to impacts. Do not store the battery with metallic prod-
ucts. Any of these actions can cause the battery to burst or leak
and cause fi re or injury as a result.
Use only the battery or AC power adapters speci ed for use with this
camera. Do not use voltages other than the power supply voltage
shown. The use of other power sources can cause a fi re.
If the battery leaks and  uid gets in contact with your eyes, skin or
clothing,  ush the a ected area with clean water and seek medical
attention or call an emergency number right away.
v
For Your Safety
WARNING
WARNING
Do not use the charger to charge batteries other than those speci ed
here. The supplied battery charger is for use only with the type
of battery supplied with the camera. Using the charger to charge
conventional batteries or other types of rechargeable batteries
can cause the battery to leak fl uid, overheat or burst.
Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type.
Do not use in the presence of  ammable objects, explosive gases,
or dust.
When carrying the battery, install it in a digital camera or keep it
in the hard case. When storing the battery, keep it in the hard case.
When discarding, cover the battery terminals with insulation tape.
Contact with other metallic objects or batteries could cause
the battery to ignite or burst.
Keep memory cards out of the reach of small children. Because
memory cards are small, they can be swallowed by children.
Be sure to store memory cards out of the reach of small chil-
dren. If a child swallows a memory card, seek medical atten-
tion or call an emergency number.
CAUTION
CAUTION
Do not use this camera in locations a ected by oil fumes, steam, hu-
midity or dust. This can cause a fi re or electric shock.
Do not leave this camera in places subject to extremely high temper-
atures. Do not leave the camera in locations such as a sealed
vehicle or in direct sunlight. This can cause a fi re.
Keep out of the reach of small children. This product could cause
injury in the hands of a child.
Do not place heavy objects on the camera. This can cause the
heavy object to tip over or fall and cause injury.
Do not move the camera while the AC power adapter is still connect-
ed. Do not pull on the connection cord to disconnect the AC power
adapter. This can damage the power cord or cables and cause
a fi re or electric shock.
Do not use the AC power adapter when the plug is damaged or the
plug socket connection is loose. This could cause a fi re or electric
shock.
CAUTION
CAUTION
Do not cover or wrap the camera or the AC power adapter in a cloth
or blanket. This can cause heat to build up and distort the cas-
ing or cause a fi re.
When you are cleaning the camera or you do not plan to use the
camera for an extended period, remove the battery and disconnect
and unplug the AC power adapter. Failure to do so can cause a
re or electric shock.
Unplug from
power socket
When charging ends, unplug the charger from the power socket.
Leaving the charger plugged into the power socket can cause
a fi re.
Using a  ash too close to a person’s eyes may temporarily a ect the
eyesight. Take particular care when photographing infants and
young children.
When a memory card is removed, the card could come out of the slot
too quickly. Use your  nger to hold it and gently release the card.
Injury could result to those struck by the ejected card.
Request regular internal testing and cleaning for your camera.
Build-up of dust in your camera can cause a fi re or electric
shock. Contact your FUJIFILM dealer to request internal clean-
ing every two years. Please note that this service is not free
of charge.
Remove your  ngers from the  ash window before the  ash  res.
Failure to observe this precaution could result in burns.
Keep the  ash window clean and do not use the  ash if the window
is obstructed. Failure to observe these precautions could cause
smoke or discoloration.
vi
For Your Safety
The Battery and Power Supply
Note: Check the type of battery used in
your camera and read the appropriate
sections.
The following describes the proper use of
batteries and how to prolong their life. Incor-
rect use can shorten battery life or cause leak-
age, overheating, fi re, or explosion.
Li-ion Batteries
Li-ion Batteries
Read this section if your camera uses a
rechargeable Li-ion battery.
The battery is not charged at shipment.
Charge the battery before use. Keep the bat-
tery in its case when not in use.
Notes on the Battery
The battery gradually loses its charge when
not in use. Charge the battery one or two
days before use.
Battery life can be extended by turning the
camera off when not in use.
Battery capacity decreases at low tempera-
tures; a depleted battery may not function at
when cold. Keep a fully charged spare battery
in a warm place and exchange as necessary,
or keep the battery in your pocket or other
warm place and insert it in the camera only
when shooting. Do not place the battery in
direct contact with hand warmers or other
heating devices.
Charging the Battery
Charge the battery in the supplied battery
charger. Charging times will increase at am-
bient temperatures below +10 °C (+50 °F) or
above +35 °C (+95 °F). Do not attempt to
charge the battery at temperatures above
40 °C (+104 °F); at temperatures below 0 °C
(+32 °F), the battery will not charge.
Do not attempt to recharge a fully charged
battery. The battery does not however need
to be fully discharged before charging.
The battery may be warm to the touch imme-
diately after charging or use. This is normal.
Battery Life
At normal temperatures, the battery can be
recharged about 300 times. A noticeable de-
crease in the length of time the battery will
hold a charge indicates that it has reached
the end of its service life and should be re-
placed.
Storage
Performance may be impaired if the battery is
left unused for extended periods when fully
charged. Run the battery fl at before storing it.
If the camera will not be used for an extended
period, remove the battery and store it in a
dry place with an ambient temperature of
from +15 °C to +25 °C (+59 °F to +77 °F). Do
not store in locations exposed to extremes of
temperature.
Cautions: Handling the Battery
• Do not transport or store with metal objects
such as necklaces or hairpins.
Do not expose to fl ame or heat.
Do not disassemble or modify.
Use with designated chargers only.
• Do not drop or subject to strong physical
shocks.
Do not expose to water.
Keep the terminals clean.
The battery and camera body may become
warm to the touch after extended use. This
is normal.
AA Alkaline/Rechargeable Ni-MH Batteries
AA Alkaline/Rechargeable Ni-MH Batteries
Read this section if your camera uses AA
alkaline or rechargeable AA Ni-MH bat-
teries. Information on compatible battery
types may be found elsewhere in the camera
manual.
Cautions: Handling the Batteries
Do not expose to water, fl ame, or heat, or
store in warm or humid conditions.
• Do not transport or store with metal objects
such as necklaces or hairpins.
Do not disassemble or modify the batteries
or battery casing.
Do not subject to strong physical shocks.
• Do not use batteries that are leaking, de-
formed, or discolored.
Keep out of reach of infants and small chil-
dren.
Insert in the correct orientation.
vii
For Your Safety
Do not mix old and new batteries, batteries
with diff erent charge levels, or batteries of
diff erent types.
• If the camera will not be used for an ex-
tended period, remove the batteries. Note
that the camera clock will be reset.
• The batteries may be warm to the touch im-
mediately after use. Turn the camera off and
allow the batteries to cool before handling.
• Battery capacity tends to decrease at low
temperatures. Keep spare batteries in a
pocket or other warm place and exchange
as necessary. Cold batteries may recover
some of their charge when warmed.
Fingerprints and other stains on the battery
terminals can impair battery performance.
Thoroughly clean the terminals with a
soft, dry cloth before inserting them in the
camera.
If the batteries leak, clean the battery
compartment thoroughly before in-
serting new batteries.
If fl uid from the battery comes into
contact with skin or clothing, fl ush
the aff ected area with water. If  uid
enters your eyes, immediately  ush the
a ected area with water and seek
medical attention. Do not rub your eyes.
Failure to observe this precaution could
result in permanent visual impairment.
Ni-MH Batteries
The capacity of Ni-MH batteries may be
temporarily reduced when new, after long
periods of disuse, or if they are repeatedly
recharged before being fully discharged. This
is normal and does not indicate a malfunc-
tion. Capacity can be increased by repeatedly
discharging the batteries using the discharge
option in the camera setup menu and re-
charging them using a battery charger.
Q CAUTION: Do not use the discharge option
with alkaline batteries.
The camera draws a small amount of current
even when off . Ni-MH batteries that have
been left in the camera for an extended pe-
riod may be drawn down to the point that
they no longer hold a charge. Battery perfor-
mance may also drop if the batteries are run
down in a device such as a fl ashlight. Use the
discharge option in the camera setup menu
to discharge Ni-MH batteries. Batteries that
no longer hold a charge even after repeat-
edly being discharged and recharged have
reached the end of their service life and must
be replaced.
Ni-MH batteries can be recharged in a battery
charger (sold separately). Batteries may be-
come warm to the touch after charging. Refer
to the instructions provided with the charger
for more information. Use the charger with
compatible batteries only.
Ni-MH batteries gradually lose their charge
when not in use.
Disposal
Dispose of used batteries in accord with local
regulations.
AC Power Adapters (Available Separately)
AC Power Adapters (Available Separately)
This section applies to all camera models.
Use only FUJIFILM AC power adapters desig-
nated for use with this camera. Other adapt-
ers could damage the camera.
• The AC power adapter is for indoor use only.
Be sure the DC plug is securely connected
to the camera.
• Turn the camera off before disconnecting
the adapter. Disconnect the adapter by the
plug, not the cable.
Do not use with other devices.
Do not disassemble.
Do not expose to high heat and humidity.
Do not subject to strong physical shocks.
• The adapter may hum or become hot to the
touch during use. This is normal.
If the adapter causes radio interference,
reorient or relocate the receiving antenna.
viii
For Your Safety
Using the Camera
Do not aim the camera at extremely bright
light sources, such as the sun in a cloudless
sky. Failure to observe this precaution could
damage the camera image sensor.
Take Test Shots
Take Test Shots
Before taking photographs on important
occasions (such as at weddings or before
taking the camera on a trip), take a test shot
and view the result in the LCD monitor to en-
sure that the camera is functioning normally.
FUJIFILM Corporation can not accept liability
for damages or lost profi ts incurred as a result
of product malfunction.
Notes on Copyright
Notes on Copyright
Unless intended solely for personal use, imag-
es recorded using your digital camera system
cannot be used in ways that infringe copy-
right laws without the consent of the owner.
Note that some restrictions apply to the
photographing of stage performances, enter-
tainments, and exhibits, even when intended
purely for personal use. Users are also asked
to note that the transfer of memory cards
containing images or data protected under
copyright laws is only permissible within the
restrictions imposed by those copyright laws.
Handling
Handling
To ensure that images are recorded correctly,
do not subject the camera to impact or physi-
cal shocks while images are being recorded.
Liquid Crystal
Liquid Crystal
In the event that the LCD monitor is damaged,
care should be taken to avoid contact with liq-
uid crystal. Take the urgent action indicated
should any of the following situations arise:
If liquid crystal comes in contact with your
skin, clean the area with a cloth and then
wash thoroughly with soap and running
water.
If liquid crystal enters your eyes, fl ush the af-
fected eye with clean water for at least 15
minutes and then seek medical assistance.
If liquid crystal is swallowed, rinse your
mouth thoroughly with water. Drink large
quantities of water and induce vomiting,
then seek medical assistance.
Although the display is manufactured using
extremely high-precision technology, it may
contain pixels that are always lit or that do not
light. This is not a malfunction, and images re-
corded with the product are unaff ected.
Trademark Information
Trademark Information
xD-Picture Card and E are trademarks
of FUJIFILM Corporation. The typefaces in-
cluded herein are solely developed by Dyna-
Comware Taiwan Inc. Macintosh, QuickTime,
and Mac OS are trademarks of Apple Inc. in
the U.S.A. and other countries. Windows 7,
Windows Vista, and the Windows logo are
trademarks of the Microsoft group of com-
panies. Adobe and Adobe Reader are either
trademarks or registered trademarks of Ado-
be Systems Incorporated in the U.S.A. and/or
other countries. The SDHC and SDXC logos
are trademarks of SD-3C, LLC. The HDMI logo
is a trademark. YouTube is a trademark of
Google Inc. All other trade names mentioned
in this manual are the trademarks or regis-
tered trademarks of their respective owners.
Electrical Interference
Electrical Interference
This camera may interfere with hospital or
aviation equipment. Consult with hospital
or airline staff before using the camera in a
hospital or on an aircraft.
Color Television Systems
Color Television Systems
NTSC (National Television System Committee)
is a color television telecasting specifi cation
adopted mainly in the U.S.A., Canada, and
Japan. PAL (Phases Alternation by Line) is
a color television system adopted mainly in
European countries and China.
Exif Print (Exif Version 2.3)
Exif Print (Exif Version 2.3)
Exif Print is a newly revised digital camera fi le
format in which information stored with pho-
tographs is used for optimal color reproduc-
tion during printing.
IMPORTANT NOTICE:
Read Before Using the Software
Direct or indirect export, in whole or in part,
of licensed software without the permission
of the applicable governing bodies is pro-
hibited.
ix
For Your Safety
IMPORTANT: Read this section before using the toponyms includ-
ed in this product.
Toponym Data License Agreement
Personal Use Only. You agree to use this Data together with this digital
camera for the solely personal, non-commercial purposes for which
you were licensed, and not for service bureau, time-sharing or other
similar purposes. Accordingly, but subject to the restrictions set forth
in the following paragraphs, you may copy this Data only as necessary
for your personal use to (i) view it, and (ii) save it, provided that you do
not remove any copyright notices that appear and do not modify the
Data in any way. You agree not to otherwise reproduce, copy, modify,
decompile, disassemble or reverse engineer any portion of this Data,
and may not transfer or distribute it in any form, for any purpose, ex-
cept to the extent permitted by mandatory laws. Multi-disc sets may
only be transferred or sold as a complete set as provided by FUJIFILM
Corporation and not as a subset thereof.
Restrictions. Except where you have been specifi cally licensed to do
so by FUJIFILM Corporation, and without limiting the preceding para-
graph, you may not (a) use this Data with any products, systems, or
applications installed or otherwise connected to or in communication
with vehicles, capable of vehicle navigation, positioning, dispatch, real
time route guidance, fl eet management or similar applications; or (b)
with or in communication with any positioning devices or any mo-
bile or wireless-connected electronic or computer devices, including
without limitation cellular phones, palmtop and handheld computers,
pagers, and personal digital assistants or PDAs.
Warning. The Data may contain inaccurate or incomplete information
due to the passage of time, changing circumstances, sources used
and the nature of collecting comprehensive geographic data, any of
which may lead to incorrect results.
No Warranty. This Data is provided to you as is, and you agree to use
it at your own risk. FUJIFILM Corporation and its licensors (and their
licensors and suppliers) make no guarantees, representations or war-
ranties of any kind, express or implied, arising by law or otherwise,
including but not limited to, content, quality, accuracy, completeness,
eff ectiveness, reliability, fi tness for a particular purpose, usefulness,
use or results to be obtained from this Data, or that the Data or server
will be uninterrupted or error-free.
Disclaimer of Warranty: FUJIFILM Corporation AND ITS LICENSORS
(INCLUDING THEIR LICENSORS AND SUPPLIERS) DISCLAIM ANY
WARRANTIES, EXPRESS OR IMPLIED, OF QUALITY, PERFORMANCE,
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-
INFRINGEMENT. Some States, Territories and Countries do not allow
certain warranty exclusions, so to that extent the above exclusion may
not apply to you.
Disclaimer of Liability: FUJIFILM Corporation AND ITS LICENSORS (IN-
CLUDING THEIR LICENSORS AND SUPPLIERS) SHALL NOT BE LIABLE TO
YOU: IN RESPECT OF ANY CLAIM, DEMAND OR ACTION, IRRESPECTIVE
OF THE NATURE OF THE CAUSE OF THE CLAIM, DEMAND OR ACTION
ALLEGING ANY LOSS, INJURY OR DAMAGES, DIRECT OR INDIRECT,
WHICH MAY RESULT FROM THE USE OR POSSESSION OF THE INFOR-
MATION; OR FOR ANY LOSS OF PROFIT, REVENUE, CONTRACTS OR
SAVINGS, OR ANY OTHER DIRECT, INDIRECT, INCIDENTAL, SPECIAL
OR CONSEQUENTIAL DAMAGES ARISING OUT OF YOUR USE OF OR
INABILITY TO USE THIS INFORMATION, ANY DEFECT IN THE INFORMA-
TION, OR THE BREACH OF THESE TERMS OR CONDITIONS, WHETHER
IN AN ACTION IN CONTRACT OR TORT OR BASED ON A WARRANTY,
EVEN IF FUJIFILM Corporation OR ITS LICENSORS HAVE BEEN ADVISED
OF THE POSSIBILITY OF SUCH DAMAGES. Some States, Territories and
Countries do not allow certain liability exclusions or damages limita-
tions, so to that extent the above may not apply to you.
Export Control. You agree not to export from anywhere any part of the
Data provided to you or any direct product thereof except in compli-
ance with, and with all licenses and approvals required under, appli-
cable export laws, rules and regulations.
Entire Agreement. These terms and conditions constitute the entire
agreement between FUJIFILM Corporation (and its licensors, includ-
ing their licensors and suppliers) and you pertaining to the subject
matter hereof, and supersedes in their entirety any and all written or
oral agreements previously existing between us with respect to such
subject matter.
x
For Your Safety
Governing Law. The above terms and conditions shall be governed by
the laws of the State of Illinois, Netherlands, without giving eff ect to
(i)its confl ict of laws provisions, or (ii)the United Nations Convention
for Contracts for the International Sale of Goods, which is explicitly ex-
cluded. You agree to submit to the jurisdiction of the State of Illinois,
The Netherlands for any and all disputes, claims and actions arising
from or in connection with the Data provided to you hereunder.
Geodetics. The geodetic system used by this device to record latitude
and longitude is WGS 84.
Copyright. The map data included in this device are protected under
copyright law and except for personal use may not be employed
without the permission of the copyright holder.
Navigation. This device can not be used for purposes of navigation.
Licensed Software Copyright Holders
© 2010 NAVTEQ All rights reserved.
This service uses POI (Points Of Inter-
est) of ZENRIN CO., LTD. “POWERED BY
ZENRIN” is a trademark of ZENRIN CO.,
LTD. © 2010 ZENRIN CO., LTD. All rights
reserved.
© Her Majesty the Queen in Right of Canada, © Queen’s Printer for
Ontario, © Canada Post Corporation, GeoBase®, © Department of
Natural Resources Canada, ZIP+4®, © United States Postal Service®
2010. the USPS®.
Australia Copyright. Based on data provided under
license from PSMA Australia Limited
(www.psma.com.au).
Austria “© Bundesamt für Eich- und Vermes-
sungswesen
Croatia, Cyprus,
Estonia, Latvia,
Lithuania, Moldova,
Poland, Slovenia and/
or Ukraine
“© EuroGeographics
France The following notice must appear on all
copies of the Data, and may also appear
on packaging: source: © IGN France – BD
TOPO®”
Germany “Die Grundlagendaten wurden mit
Genehmigung der zuständigen Behörden
entnommen” or “Die Grundlagendaten
wurden mit Genehmigung der zustaendi-
gen Behoerden entnommen.
Great Britain “Based upon Crown Copyright material.
Greece “Copyright Geomatics Ltd.
Hungary “Copyright © 2003; Top-Map Ltd.
Italy “La Banca Dati Italiana è stata prodotta
usando quale riferimento anche cartografi a
numerica ed al tratto prodotta e fornita
dalla Regione Toscana.
Norway “Copyright © 2000; Norwegian Mapping
Authority”
Portugal “Source: IgeoE – Portugal”
Spain “Información geográfi ca propiedad del
CNIG”
Sweden “Based upon electronic data Ó National
Land Survey Sweden.
Switzerland “Topografi sche Grundlage: Ó Bundesamt für
Landestopographie.
xi
For Your Safety
Governing Law
POI information in Japan: The above terms and conditions shall be
governed by the laws of Japan, without giving eff ect to (i) its confl ict
of laws provisions, or (ii) the United Nations Convention for Contracts
for the International Sale of Goods, which is explicitly excluded. You
agree to submit to the exclusive jurisdiction of the Tokyo District Court
in the fi rst instance for any and all disputes, claims and actions arising
from or in connection with the Data provided to you hereunder.
POI information outside Japan: The above terms and conditions shall be
governed by the laws of the State of Illinois, without giving eff ect to
(i) its confl ict of laws provisions, or (ii) the United Nations Convention
for Contracts for the International Sale of Goods, which is explicitly
excluded. You agree to submit to the jurisdiction of the State of Illinois
for any and all disputes, claims and actions arising from or in connec-
tion with the Data provided to you hereunder.
Government End Users: If the Data is being acquired by or on behalf of
the United States government or any other entity seeking or apply-
ing rights similar to those customarily claimed by the United States
government, this Data is a commercial item” as that term is defi ned at
48 C.F.R. (“FAR”) 2.101, is licensed in accordance with these End-User
Terms, and each copy of Data delivered or otherwise furnished shall
be marked and embedded as appropriate with the following “Notice
of Use, and shall be treated in accordance with such Notice:
NOTICE OF USE
CONTRACTOR (MANUFACTURER/ SUPPLIER) NAME: NAVTEQ
CONTRACTOR (MANUFACTURER/SUPPLIER) ADDRESS: 425 West Randolph
Street, Chicago, Illinois 60606
This Data is a commercial item as defi ned in FAR 2.101 and is subject
to these End-User Terms under which this Data was provided.
© 2010 NAVTEQ – All rights reserved.
If the Contracting Offi cer, federal government agency, or any federal
offi cial refuses to use the legend provided herein, the Contracting
Offi cer, federal government agency, or any federal offi cial must notify
NAVTEQ prior to seeking additional or alternative rights in the Data.
xii
About This Manual
About This Manual
This manual is for use with FinePix F770EXR and F750EXR cameras. With the
exceptions of the features listed below, operations for the two models are
identical.
Model
Model
Feature
Feature
FinePix F770EXR
FinePix F770EXR
FinePix F750EXR
FinePix F750EXR
R
R
GPS
GPS
P
P
65
65
Not available
Not available
j
j
RAW
RAW
P
P
117
117
P
P
BEST FRAME CAPTURE
BEST FRAME CAPTURE
P
P
48
48
L
L
FINAL
FINAL
n
n
Not available
Not available
P
P
48
48
Memory Cards
Memory Cards
Pictures can be stored in the cameras internal memory or on optional SD, SDHC, and
SDXC memory cards (P 12), referred to in this manual as “memory cards.
xiii
About This Manual
Before using the camera, read this manual and the warnings in “For Your Safe-
ty (P ii). For information on speci c topics, consult the sources below.
Table of Contents
Table of Contents
............................
............................
P
P
xv
xv
Troubleshooting
Troubleshooting
..........................
..........................
P
P
124
124
The Table of Contents” gives an over-
view of the entire manual. The princi-
pal camera operations are listed here.
Having a speci c problem with the
camera? Find the answer here.
Warning Messages and Displays
Warning Messages and Displays
...
...
P
P
131
131
Find out what’s behind that  ashing
icon or error message in the display.
Temperature Warning
Temperature Warning
The camera will turn o automatically before its temperature or the temperature
of the battery rise above safe limits. Pictures taken when a temperature warning is
displayed may exhibit higher levels of noise (mottling). Turn the camera o and wait
for it to cool before turning it on again.
xiv
Deleting Pictures Deleting Pictures
y To delete a picture,
display it full frame and
press the selector up (b).
Silent Mode Silent Mode
y Press and hold the DISP/
BACK button to disable
camera lights and
sounds.
Frequently-Used Buttons
Frequently-Used Buttons
Taking Pictures During PlaybackTaking Pictures During Playback
y To return instantly to shooting mode,
press the shutter button halfway.

View
Shoot
Turning the Camera on in Playback ModeTurning the Camera on in Playback Mode
y When the camera is
o , playback can be
started by pressing the
a button for about a
second.
xv
Table of Contents
Table of Contents
For Your Safety ..................................................................ii
IMPORTANT SAFETY INSTRUCTIONS ..................................ii
Safety Notes ....................................................................iv
About This Manual ..........................................................xii
Frequently-Used Buttons ..............................................xiv
Before You Begin
Before You Begin
Symbols and Conventions .................................................1
Supplied Accessories .........................................................1
Parts of the Camera ..........................................................2
Camera Displays ...............................................................4
Shooting ........................................................................4
Playback .........................................................................5
First Steps
First Steps
Charging the Battery ........................................................7
Inserting the Battery and a Memory Card .......................9
Compatible Memory Cards .............................................12
Turning the Camera on and O ......................................14
Shooting Mode ..............................................................14
Playback Mode ...............................................................14
Basic Setup ......................................................................16
Basic Photography and Playback
Basic Photography and Playback
Taking Pictures in R (E AUTO) Mode.............17
Viewing Pictures .............................................................21
More on Photography
More on Photography
Shooting Mode ................................................................22
E (E AUTO/E Priority) .................23
R (E AUTO) .................................................23
E Priority ..........................................................24
Adv. ADVANCED ..........................................................25
r MOTION PANORAMA 360.......................................25
i PRO FOCUS ...........................................................28
j PRO LOW-LIGHT ....................................................29
n MULTIPLE EXPOSURE ..............................................30
i INDIVID. SHUTTER 3D ..............................................31
SP SCENE POSITION.......................................................33
M MANUAL ...................................................................35
A APERTURE PRIORITY AE ..............................................35
S SHUTTER PRIORITY AE ................................................36
P PROGRAM AE ..............................................................36
Focus Lock ........................................................................37
d Exposure Compensation ..........................................39
F Macro Mode (Close-ups) ...........................................40
N Using the Flash (Super-Intelligent Flash) .................41
h Using the Self-Timer .................................................43
The Fn Button ..................................................................44
b Intelligent Face Detection .......................................45
R Continuous Shooting ...............................................46
ITOP n (F770EXR) .....................................................47
ITOP n (F750EXR) .....................................................47
LFINAL n (F750EXR Only) ..........................................48
PBEST FRAME CAPTURE (F770EXR Only) ...................48
OAE BKT ..................................................................50
XFILM SIMULATION BKT ............................................50
YDYNAMIC RANGE BKT .............................................50
xvi
Table of Contents
n Face Recognition ......................................................51
Adding New Faces ..........................................................51
Viewing, Editing, and Deleting Existing Data .................53
Adding Faces Automatically ...........................................53
More on Playback
More on Playback
Playback Options .............................................................55
Continuous Shooting ......................................................55
I Favorites: Rating Pictures .........................................55
Playback Zoom ...............................................................56
Multi-Frame Playback ....................................................57
A Deleting Pictures ......................................................58
b Image Search............................................................59
m PhotoBook Assist .....................................................60
Creating a PhotoBook.....................................................60
Viewing Photobooks ......................................................61
Editing and Deleting Photobooks ...................................61
Viewing Panoramas ........................................................62
Viewing Photo Information ............................................63
GPS (F770EXR Only)
GPS (F770EXR Only)
Recording GPS Data with Pictures .................................65
GPS Tracking ....................................................................67
Viewing GPS Data ............................................................69
Photo Navigation ...........................................................69
Copying GPS Data to Other Images .................................70
RLandmark Navigator ................................................71
Movies
Movies
Recording Movies ............................................................73
Movie Frame Size ...........................................................74
Viewing Movies ...............................................................75
Connections
Connections
Viewing Pictures on TV ...................................................76
Printing Pictures via USB ................................................78
Printing the DPOF Print Order.........................................80
Viewing Pictures on a Computer ....................................82
Windows: Installing MyFinePix Studio ...........................82
Macintosh: Installing FinePixViewer...............................85
Connecting the Camera ..................................................87
Menus
Menus
Using the Menus: Shooting Mode ..................................90
Using the F-Mode Menu .............................................90
F-Mode Menu Options ................................................90
NISO........................................................................90
OIMAGE SIZE ............................................................91
RCONTINUOUS .........................................................92
RLANDMARK NAVIGATOR (F770EXR Only) ..................92
RSET-UP (F770EXR Only) ..........................................92
ZADVANCED ANTI BLUR ............................................93
PFILM SIMULATION ..................................................93
xvii
Table of Contents
Using the Shooting Menu...............................................94
Shooting Menu O
ptions .................................................94
AE MODE ....................................................94
A Adv. MODE ............................................................94
A SCENE POSITION .....................................................94
N ISO........................................................................94
O IMAGE SIZE ............................................................94
T IMAGE QUALITY .....................................................94
U DYNAMIC RANGE ...................................................95
P FILM SIMULATION ..................................................95
D WHITE BALANCE ....................................................96
yINTELLIGENT SHARPNESS ........................................97
RCONTINUOUS .........................................................97
RMY LANDMARK REGISTER (F770EXR Only) ...............97
ZADVANCED ANTI BLUR ............................................97
b FACE DETECTION ....................................................97
C PHOTOMETRY ........................................................98
F AF MODE ...............................................................99
n FACE RECOGNITION .................................................99
FMOVIE AF MODE ..................................................100
W MOVIE MODE .......................................................100
a STILL SHOOTING IN MOVIE ....................................100
J AE BKT EV STEPS ..................................................100
Using the Menus: Playback Mode ................................101
Using the F-Mode Menu ...........................................101
F-Mode Menu Options ..............................................101
m PHOTOBOOK ASSIST ..............................................101
RLANDMARK NAVIGATOR (F770EXR Only) ................101
R PHOTO NAVIGATION (F770EXR Only) ......................101
RSET-UP (F770EXR Only) ........................................102
I SLIDE SHOW ........................................................102
Using the Playback Menu .............................................103
Playback Menu Options ................................................103
m PHOTOBOOK ASSIST ..............................................103
RLANDMARK NAVIGATOR (F770EXR Only) ................103
RLOCATION INFO COPY (F770EXR Only) ....................103
R PHOTO NAVIGATION (F770EXR Only) ......................103
b IM
AGE SEARCH ....................................................103
A ERASE .................................................................103
j MARK FOR UPLOAD TO ..........................................104
I SLIDE SHOW ........................................................105
B RED EYE REMOVAL ...............................................105
D PROTECT ..............................................................105
G CROP...................................................................106
O RESIZE .................................................................106
C IMAGE ROTATE .....................................................107
E COPY ...................................................................107
F VOICE MEMO .......................................................108
i ERASE FACE RECOG. ..............................................108
K PRINT ORDER (DPOF) ............................................108
J DISP ASPECT ........................................................109
xviii
Table of Contents
The Setup Menu ............................................................110
Using the Setup Menu ..................................................110
Setup Menu Options ....................................................111
F DATE/TIME ..........................................................111
N TIME DIFFERENCE .................................................111
Q a ....................................................111
o SILENT MODE .......................................................111
R RESET ..................................................................112
K FORMAT ..............................................................112
RSET-UP (F770EXR Only) ........................................112
A IMAGE DISP. .........................................................113
B FRAME NO. ..........................................................113
G OPERATION VOL....................................................114
H SHUTTER VOLUME ................................................114
e SHUTTER SOUND ..................................................114
I PLAYBACK VOLUME ..............................................114
J LCD BRIGHTNESS ..................................................114
T MONITOR SUNLIGHT MODE ...................................114
N AUTO POWER OFF ................................................114
F Fn BUTTON ..........................................................114
L DUAL IS MODE .....................................................115
B RED EYE REMOVAL ...............................................115
R INTELLIGENT DIGITAL ZOOM ..................................116
C AF ILLUMINATOR ..................................................117
j RAW (F770EXR Only) ............................................117
t SAVE ORG IMAGE .................................................117
m AUTOROTATE PB ...................................................117
O BACKGROUND COLOR ............................................117
c GUIDANCE DISPLAY ..............................................117
Q VIDEO SYSTEM .....................................................118
x POWER MANAGEMENT .........................................118
U DATE STAMP ........................................................119
W START-UP SCREEN ................................................119
RDEMONSTRATION (F770EXR Only) .........................119
Technical Notes
Technical Notes
Optional Accessories .....................................................120
Accessories from FUJIFILM............................................121
Caring for the Camera ...................................................122
Storage and Use ...........................................................122
Cleaning .......................................................................123
Traveling ......................................................................123
Troubleshooting
Troubleshooting
Problems and Solutions ................................................124
Warning Messages and Displays ..................................131
Appendix
Appendix
Internal Memory/Memory Card Capacity ....................135
FinePix F770EXR ..........................................................135
FinePix F750EXR ..........................................................136
Speci cations ................................................................137
1
Before You Begin
Before You Begin
Symbols and Conventions
Symbols and Conventions
The following symbols are used in this manual:
Q : This information should be read before use to ensure correct operation.
R : Additional information that may be helpful when using the camera.
P : Other pages in this manual on which related information may be found.
Menus and other text in the displays are shown in bold. In the illustrations in
this manual, displays may be simpli ed for explanatory purposes.
Supplied Accessories
Supplied Accessories
The following items are included with the camera:
Rechargeable
battery
F770EXR: NP-50A
F750EXR: NP-50
BC-45W battery
charger
USB cable A/V cable CD-ROM
(contains this
manual)
• Strap
Basic Manual
Attaching the Strap
Attaching the Strap
Attach the strap
as shown.
2 Before You Begin
Parts of the Camera
Parts of the Camera
For more information, refer to the page listed to the right of each item.
Selector button
Move cursor up
d (exposure compensation) button (P 39)
b (delete) button (P xiv)
MENU/OK button
Move cursor right
N ( ash) button (P 41)
Move cursor left
F (macro) button (P 40)
Command dial Move cursor down
h (self-timer) button (P 43)
* The illustrations in this manual have been simpli ed for explanatory purposes.
3Before You Begin
Parts of the Camera
1 Fn (function) button ..................................................... 44
2 Shutter button .............................................................. 19
3 ON/OFF button ............................................................. 14
4 Flash ............................................................................. 41
5 Flash pop-up button ..................................................... 41
6 Microphone ...........................................................73, 108
7 Lens and lens cover
8 AF-assist illuminator ................................................... 117
Self-timer lamp ............................................................ 43
9 Zoom control ...........................................................18, 56
10 Built-in GPS antenna (F770EXR only) ............................. 65
11 LCD monitor .................................................................... 4
12 a (playback) button .................................................. 21
13 Indicator lamp (see below)
14 Mode dial...................................................................... 22
15 Strap eyelet .................................................................... 1
16 F (movie recording) button ....................................... 73
17 Terminal cover ...................................................76, 78, 87
18 DC coupler cable cover ................................................ 121
19 F (photo mode) button .......................................90, 101
Monitor sunlight mode
1
.................................................. 6
20 DISP (display)/BACK button .....................................6, 16
o (silent mode) button
2
............................................. xiv
21 Battery-chamber cover ................................................... 9
22 Tripod mount
23 Speaker ..................................................................75, 108
24 USB multi-connector .........................................76, 78, 87
25 Connector for HDMI cable ............................................. 77
26 Battery latch ..............................................................9, 11
27 Battery chamber ............................................................. 9
28 Memory card slot .......................................................... 10
1 Press and hold the F button for monitor sunlight mode.
2 Press and hold the DISP/BACK button until o is displayed.
The Indicator Lamp
The Indicator Lamp
The indicator lamp shows camera status as follows:
Indicator lamp
Indicator lamp
Camera status
Camera status
Glows green
Glows green Focus locked.
Blinks green
Blinks green Blur, focus, or exposure warning. Picture can be taken.
Blinks green and orange
Blinks green and orange Recording pictures. Additional pictures can be taken.
Glows orange
Glows orange Recording pictures. No additional pictures can be taken at this time.
Blinks orange
Blinks orange Flash charging;  ash will not  re when picture is taken.
Blinks red
Blinks red Lens or memory error.
4 Before You Begin
Parts of the Camera
Camera Displays
Camera Displays
The following types of indicator may be displayed during shooting and play-
back. Indicators vary with camera settings.
Shooting
F
10:00
AM
10:00
AM
9
250
250
F
3.5
F
3.5
P
800
2
2
3
3
-
1
-
1
12 / 31 / 2050
12 / 31 / 2050
11 Number of available frames ........................................ 135
12 Sensitivity ..................................................................... 90
13 Image size/quality ...................................................91, 94
14 Dynamic range ............................................................. 95
15 Film simulation ............................................................. 93
16 White balance ............................................................... 96
17 Battery level ................................................................... 6
18 Dual IS mode .............................................................. 115
19 GPS signal strength (F770EXR only) ............................... 65
20 Blur warning ..........................................................42, 131
21 Focus warning .......................................................19, 131
22 Exposure compensation ................................................ 39
23 Aperture
24 Shutter speed
25 Date and time ............................................................... 16
26 Focus frame .................................................................. 37
27 Date stamp ................................................................. 119
28 Intelligent sharpness .................................................... 97
29 Self-timer indicator ...................................................... 43
30 Macro (close-up) mode ................................................. 40
31 Flash mode ................................................................... 41
1 Shooting mode ............................................................. 22
2 Intelligent Face Detection indicator .............................. 45
3 Metering ....................................................................... 98
4 Continuous shooting mode ........................................... 46
5 Silent mode indicator ..............................................3, 111
6 Place name stamp (F770EXR only) ................................. 92
7 Temperature warning ................................................. 131
8 Internal memory indicator
*
9 Monitor sunlight mode ................................................... 6
10 Movie mode .................................................................. 74
* a: indicates that no memory card is inserted and that pictures will be stored in the cameras internal memory (P 10).
5Before You Begin
Parts of the Camera
Playback
100-0001
100-0001
400
400
12 / 31 / 2050
12 / 31 / 2050
10:00
AM
10:00
AM
2
2
-
1
-
1
1 / 250
1/250
F
3.5
F
3.5
3
3
4:3
4:3
F
F
YouTube
1 Playback mode indicator..........................................21, 55
2 Intelligent Face Detection indicator .......................45, 105
3 Red-eye removal indicator .......................................... 105
4 Pro focus mode, pro low-light mode ........................28, 29
5 Motion panorama z ................................................. 62
6 3D image ...................................................................... 31
7 Gift image ..................................................................... 55
8 Frame number ............................................................ 113
9 Dynamic range ............................................................. 95
10
E mode .............................................................. 23
11 GPS data (F770EXR only) ................................................ 69
12 Portrait enhancer .......................................................... 33
13 Mark for upload to ...................................................... 104
14 Photobook assist........................................................... 60
15 Voice memo indicator ................................................. 108
16 DPOF print indicator ..................................................... 80
17 Protected image ......................................................... 105
18 Favorites ....................................................................... 55
6 Before You Begin
Parts of the Camera
Battery Level
Battery Level
Battery level is shown as follows:
Indicator
Indicator
Description
Description
D (white)
Battery partially discharged.
C (white)
Battery more than half discharged.
B (red)
Low battery. Charge as soon as possible.
A (blinks red)
Battery exhausted. Turn camera o and charge battery.
Hiding and Viewing Indicators
Hiding and Viewing Indicators
Press DISP/BACK to cycle through shooting and playback indicators as follows:
Shooting:
Indicators displayed/indicators hidden/best framing/HD framing/histogram
Playback:
Indicators displayed/indicators hidden/I favorites (P 55)/photo info (P 63)
Bright Ambient Lighting
Bright Ambient Lighting
Re ections and glare caused by bright ambient lighting may make it hard to see the
display in the monitor, particularly when the camera is used outdoors. This can be ad-
dressed by holding the
F
button to trigger outdoor mode. Outdoor mode can also be
enabled using the T MONITOR SUNLIGHT MODE option in the setup menu (P 114).
7
First Steps
First Steps
Charging the Battery
Charging the Battery
The battery is not charged at shipment. Charge the battery before use.
1
Place the battery in the supplied battery charger.
Insert the battery in the orientation
indicated by the DFC labels.
The F770EXR uses an NP-50A recharge-
able battery, the F750EXR an NP-50 re-
chargeable battery.
Battery charger
DFC
label
Charge lamp
DFC label
Arrow
Battery
2
Plug the charger in.
Plug the charger into an indoor power outlet. The charging indicator will
light.
The Charging Indicator
The Charging Indicator
The charging indicator shows battery charge status as follows:
Charging indicator
Charging indicator
Battery status
Battery status
Action
Action
O
O
Battery not inserted.
Battery not inserted.
Insert the battery.
Insert the battery.
Battery fully charged.
Battery fully charged.
Remove the battery.
Remove the battery.
On
On
Battery charging.
Battery charging.
Blinks
Blinks
Battery fault.
Battery fault.
Unplug the charger and remove the battery.
Unplug the charger and remove the battery.
8 First Steps
Charging the Battery
3
Charge the battery.
Remove the battery when charging is complete. See the speci cations
(P 141) for charging times (note that charging times increase at low tem-
peratures).
Q Unplug the charger when it is not in use.
9 First Steps
Inserting the Battery and a Memory Card
Inserting the Battery and a Memory Card
Although the camera can store pictures in internal memory, optional SD,
SDHC, and SDXC memory cards (sold separately) can be used to store addi-
tional pictures. After charging the battery, insert the battery and memory card
as described below.
1
Open the battery-chamber cover.
R Be sure the camera is o before opening
the battery-chamber cover.
Q Do not open the battery-chamber cover
when the camera is on. Failure to ob-
serve this precaution could result in dam-
age to image  les or memory cards.
Q Do not use excessive force when handling the battery-chamber cover.
2
Insert the battery.
Align the orange stripe on the battery with the orange
battery latch and slide the battery into the camera,
keeping the battery latch pressed to one side. Con rm
that the battery is securely latched.
Q Insert the battery in the correct orientation. Do NOT use
force or attempt to insert the battery upside down or back-
wards. The battery will slide in easily in the correct orien-
tation.
Battery latch
Orange stripe
10 First Steps
Inserting the Battery and a Memory Card
3
Insert the memory card.
Holding the memory card in the orientation shown at
right, slide it in until it clicks into place at the back of
the slot.
Q Be sure card is in the correct orientation; do not insert at
an angle or use force. If the memory card is not correctly
inserted or no memory card is inserted, a will appear in
the LCD monitor and internal memory will be used for re-
cording and playback.
Click
Q SD/SDHC/SDXC memory cards can be locked, making
it impossible to format the card or to record or delete
images. Before inserting an SD/SDHC/SDXC memory
card, slide the write-protect switch to the unlocked
position.
Write-protect switch
4
Close the battery-chamber cover.
11 First Steps
Inserting the Battery and a Memory Card
R
R
Using an AC Power Adapter
Using an AC Power Adapter
The camera can be powered by an optional AC power adapter and DC coupler (sold
separately). See the manuals provided with the AC power adapter and DC coupler
for details.
Depending on the country or region of sale, a demo mode slide show may start if
the camera is turned on while powered by an AC power adapter. Press the shutter
button to end the show.
Removing the Battery and Memory Card
Removing the Battery and Memory Card
Before removing the battery or memory card, turn the camera o and open the
battery-chamber cover.
To remove the battery, press the battery latch to the side, and
slide the battery out of the camera as shown.
Battery latch
To remove the memory card, press it in and release it slowly.
The card can then be removed by hand. When a memory card
is removed, the card could come out of the slot too quickly. Use
your  nger to hold it and gently release the card.
12 First Steps
Inserting the Battery and a Memory Card
Compatible Memory Cards
FUJIFILM and SanDisk SD, SDHC, and SDXC memory cards have been ap-
proved for use in the camera. A complete list of approved memory cards is
available at http://www.fujifilm.com/support/digital_cameras/compatibility/.
Operation is not guaranteed with other cards. The camera can not be used
with xD-Picture Cards or MultiMediaCard (MMC) devices.
Q
Q
Memory Cards
Memory Cards
Do not turn the camera o or remove the memory card while the memory card is
being formatted or data are being recorded to or deleted from the card. Failure to
observe this precaution could damage the card.
Format SD/SDHC/SDXC memory cards before  rst use, and be sure to reformat all
memory cards after using them in a computer or other device. For more information
on formatting memory cards, see K FORMAT” ( P 112).
Memory cards are small and can be swallowed; keep out of reach of children. If a
child swallows a memory card, seek medical assistance immediately.
miniSD or microSD adapters that are larger or smaller than the standard dimensions
of an SD/SDHC/SDXC card may not eject normally; if the card does not eject, take
the camera to an authorized service representative. Do not forcibly remove the card.
Do not a x labels to memory cards. Peeling labels can cause camera malfunction.
Movie recording may be interrupted with some types of SD/SDHC/SDXC memory
card. Use a G card or better when shooting HD or high-speed movies.
13 First Steps
Inserting the Battery and a Memory Card
The data in internal memory may be erased or corrupted when the camera is re-
paired. Please note that the repairer will be able to view pictures in internal memory.
• Formatting a memory card or internal memory in the camera creates a folder in
which pictures are stored. Do not rename or delete this folder or use a computer or
other device to edit, delete, or rename image  les. Always use the camera to delete
pictures from memory cards and internal memory; before editing or renaming  les,
copy them to a computer and edit or rename the copies, not the originals.
Q
Q
Batteries
Batteries
Remove dirt from the battery terminals with a clean, dry cloth. Failure to observe this
precaution could prevent the battery from charging.
• Do not a x stickers or other objects to the battery. Failure to observe this precaution
could make it impossible to remove the battery from the camera.
Do not short the battery terminals. The battery could overheat.
Read the cautions in The Battery and Power Supply (P vi).
Use only battery chargers designated for use with the battery. Failure to observe this
precaution could result in product malfunction.
• Do not remove the labels from the battery or attempt to split or peel the outer casing.
The battery gradually loses its charge when not in use. Charge the battery one or
two days before use.
14 First Steps
Turning the Camera on and O
Turning the Camera on and O
Shooting Mode
Shooting Mode
Press the ON/OFF button to turn the
camera on. The lens will extend au-
tomatically.
Press ON/OFF again to turn the camera
o .
R
R
Switching to Playback Mode
Switching to Playback Mode
Press the a button to start playback.
Press the shutter button halfway to return
to shooting mode.
Playback Mode
Playback Mode
To turn the camera on and begin
playback, press the a button for
about a second.
Press the a button again or press
the ON/OFF button to turn the camera
o .
R
R
Switching to Shooting Mode
Switching to Shooting Mode
To exit to shooting mode, press the shut-
ter button halfway. Press the a button
to return to playback.
15 First Steps
Turning the Camera on and O
Q Forcibly obstructing the lens could cause damage or product malfunction.
Q Fingerprints and other marks on the lens can a ect pictures. Keep the lens clean.
Q The ON/OFF button does not completely end the supply of power to the camera.
R
R
Auto Power O
Auto Power O
The camera will turn o automatically if no operations are performed for the length of
time selected for N AUTO POWER OFF (P 114).
16 First Steps
Basic Setup
Basic Setup
A language-selection dialog is displayed the  rst time the camera is turned
on. Set up the camera as described below (you can reset the clock or change
languages at any time using the F DATE/TIME or Q a options in
the setup menu; for information on displaying the setup menu, see page 111).
1
Highlight a language and press MENU/OK.
R Press DISP/BACK to skip the current step. Any steps you skip
will be displayed the next time the camera is turned on.
START MENU
SET NO
ENGLISH
DEUTSCH
PORTUGUÊS
FRANCAIS
ESPAÑOL
2
The date and time will be displayed. Press the selector
left or right to highlight the year, month, day, hour, or
minute and press up or down to change. To change the
order in which the year, month, and day are displayed,
highlight the date format and press the selector up or
down. Press MENU/OK when settings are complete.
3
Power management options will be displayed. Press the selector up or
down to highlight one of the following options and then press MENU/OK:
n POWER SAVE: Save battery power.
o CLEAR DISPLAY: Choose for a brighter, higher quality display.
R
R
The Camera Clock
The Camera Clock
If the battery is removed for an extended period, the camera clock will be reset and the
language-selection dialog will be displayed when the camera is turned on.
NOSET
DATE/TIME NOT SET
2014
2013
2011
2010
1. 1 12
:
00
AM
2012
YY. MM. DD
17
Basic Photography and Playback
Basic Photography and Playback
Taking Pictures in
Taking Pictures in
R
R
(
(
E
E
AUTO
AUTO
) Mode
) Mode
This section describes how to take pictures in R (E AUTO) mode.
1
Select E mode.
Turn the camera on and rotate the mode dial to E. The R display
will appear in the LCD monitor.
The
The
o
o
Icon
Icon
In R mode, the camera continuously adjusts focus and searches for faces, in-
creasing the drain on the battery. o is displayed in the LCD monitor.
Scene Icon (
Scene Icon (
P
P
23)
23)
The camera automatically selects the appropriate scene.
R The camera analyses the scene and selects the preferred E mode when
the shutter button is pressed halfway (P 24).
R To raise the  ash when lighting is poor, press the  ash pop-up button (P 41).
18 Basic Photography and Playback
Taking Pictures in R (E AUTO) Mode
2
Frame the picture.
Use the zoom control to frame the picture in the display.
Zoom indicator
Zoom out Zoom in
Holding the Camera
Holding the Camera
Hold the camera steady with both hands and brace your
elbows against your sides. Shaking or unsteady hands can
blur your shots.
To prevent pictures that are out of focus or too dark (under-
exposed), keep your  ngers and other objects away from
the lens and  ash.
19Basic Photography and Playback
Taking Pictures in R (E AUTO) Mode
3
Focus.
Press the shutter button halfway to focus.
R The lens may make a noise when the camera focuses;
this is normal. If the subject is poorly lit, the AF-assist
illuminator may light; see C AF ILLUMINATOR” ( P 117)
for information on disabling the illuminator.
Double
beep
If the camera is able to focus, it will beep twice and the indicator lamp will
glow green.
If the camera is unable to focus, the focus frame will turn red, s will be dis-
played, and the indicator lamp will blink green. Change the composition
or use focus lock (P 37).
20 Basic Photography and Playback
Taking Pictures in R (E AUTO) Mode
4
Shoot.
Smoothly press the shutter button the rest of the way
down to take the picture.
Click
The Shutter Button
The Shutter Button
The shutter button has two positions. Pressing the shutter button halfway sets
focus and exposure; to shoot, press the shutter button the rest of the way down.
21Basic Photography and Playback
Viewing Pictures
Viewing Pictures
Pictures can be viewed in the LCD monitor. When taking important photo-
graphs, take a test shot and check the results.
1
Press the a button.
The most recent picture will be displayed.
2
View additional pictures.
Press the selector right to view pictures in the order
recorded, left to view pictures in reverse order.
Press the shutter button to exit to shooting mode.
22
More on Photography
More on Photography
Shooting Mode
Shooting Mode
Choose a shooting mode according to the scene or type
of subject. To select a shooting mode, align the mode
icon with the mark next to the mode dial.
E: Improve clarity, reduce
noise, increase dynamic range,
or let the camera automatically
adjust settings to suit the scene
(P 23).
SP (SCENE POSITION): Choose a
scene suited to the subject or
shooting conditions and let the
camera do the rest (P 33).
Adv. (ADVANCED): Sophisticated techniques made easy
(P 25).
B (AUTO): A simple point-and-
shoot” mode recommended for
rst-time users of digital cameras.
M, A, S, P: Select for full control over camera settings
(P 35), including aperture (M and A) and/or shutter speed
(M and S).
23More on Photography
Shooting Mode
E
E
(
(
E
E
AUTO/
AUTO/
E
E
Priority)
Priority)
Optimize settings for your current subject or improve clarity, reduce
noise, or enhance dynamic range. Rotate the mode dial to E
and choose one of the following E modes in the shooting
menu.
R (E AUTO)
The camera automatically selects the scene and E
mode according to shooting conditions (P 17).
R If S is selected for O IMAGE SIZE in R mode, the camera
will automatically select the optimal image size.
R R INTELLIGENT DIGITAL ZOOM is restricted to 2× (P 116).
The Scene Icon
Scene icon
The camera selects from the following scenes:
Scene
Scene
Main subject
Main subject
AUTO
AUTO
LAND-
LAND-
SCAPE
SCAPE
NIGHT
NIGHT
NIGHT
NIGHT
(TRIPOD)
(TRIPOD)
MACRO
MACRO
BEACH
BEACH
SUNSET
SUNSET
SNOW
SNOW
SKY
SKY
GREEN-
GREEN-
ERY
ERY
SKY &
SKY &
GREENERY
GREENERY
Non-portrait
Non-portrait
a
a
c
c
d
d
*
*
h
h
*
*
e
e
u
u
v
v
w
w
x
x
y
y
z
z
Portrait
Portrait
Normal
Normal
d
d
d
d
c
c
d
d
d
d
*
*
dh
dh
*
*
d
d
u
u
d
d
v
v
d
d
w
w
d
d
x
x
d
d
y
y
d
d
z
z
Backlit
Backlit
g
g
gc
gc
gu
gu
gv
gv
gw
gw
gx
gx
gy
gy
gz
gz
Moving object
Moving object
c
c
c
c
c
c
c
c
d
d
c
c
h
h
c
c
e
e
c
c
u
u
c
c
v
v
c
c
w
w
c
c
x
x
c
c
y
y
c
c
z
z
Portrait and
Portrait and
motion
motion
Normal
Normal
a
a
a
a
c
c
a
a
d
d
a
a
h
h
a
a
u
u
a
a
v
v
a
a
w
w
a
a
x
x
a
a
y
y
a
a
z
z
Backlit
Backlit
b
b
b
b
c
c
b
b
u
u
b
b
v
v
b
b
w
w
b
b
x
x
b
b
y
y
b
b
z
z
* If n is displayed, the camera will take a series of shots (advanced anti-blur; P 24).
Q The mode selected may vary with shooting conditions. If the mode and subject do not match,
select B mode (P 22) or choose SP (P 33) and select a scene manually.
24 More on Photography
Shooting Mode
Advanced Anti Blur
Advanced Anti Blur
When n is displayed, the camera will take a series of exposures and combine them
to form a single image, reducing “noise (mottling) and blur.
R n is available when ON is selected in the shooting menu (P 93) and the  ash
(P 41) is o or set to auto.
Q Some time may be required to combine the exposures into a single image. A
single combined image may not be created if the subject or camera moves dur-
ing shooting. Keep the camera steady during shooting and do not move the
camera until shooting is complete.
Q Frame coverage is reduced.
The E Icon
When the shutter button is pressed halfway, the camera chooses the pre-
ferred E mode:
S (RESOLUTION PRIORITY): Produces crisp, clear shots.
T (HIGH ISO & LOW NOISE): Reduces noise in pictures taken at high sensitivities.
U (D-RANGE PRIORITY): Increases the amount of detail visible in highlights.
E Priority
Select this mode to manually choose from the following E modes:
S (RESOLUTION PRIORITY): Choose for crisp, clear shots.
T (HIGH ISO & LOW NOISE): Reduce noise in pictures taken at high sensitivities.
U (D-RANGE PRIORITY): Increase the amount of detail visible in highlights.
U DYNAMIC RANGE (P 95) can be set to Z (1600%) and Y (800%).
25More on Photography
Shooting Mode
Adv.
Adv.
ADVANCED
ADVANCED
This mode combines “point-and-shoot” simplicity with sophisti-
cated photographic techniques. The A Adv. MODE option in
the shooting menu can be used to choose from the following ad-
vanced modes:
r MOTION PANORAMA 360
Follow an on-screen guide to take photos that will au-
tomatically be joined to form a panorama. The camera
zooms all the way out and remains  xed at the widest
angle until shooting is complete.
1
To select the angle through which you will pan the camera while shoot-
ing, press the selector down. Press the selector left or right to highlight an
angle and press MENU/OK.
2
Press the selector right to view a choice of pan directions. Press the selec-
tor left or right to highlight a pan direction and press MENU/OK.
3
Press the shutter button all the way down to start recording. There is no
need to keep the shutter button pressed during recording.
26 More on Photography
Shooting Mode
4
Pan the camera in the direction shown by the arrow.
Shooting ends automatically when the progress bar is
full and the panorama is complete.
R Shooting ends if the shutter button is pressed all the way
down during shooting. No panorama will be recorded if
the shutter button is pressed before the camera has been
panned through 120 °.
120
Progress bar
Q Panoramas are created from multiple frames. The camera may in some cases record
an greater or lesser angle than selected or be unable to stitch the frames together
perfectly. The last part of the panorama may not be recorded if shooting ends be-
fore the panorama is complete.
Q Shooting may be interrupted if the camera is panned too quickly or too slowly. Pan-
ning the camera in a direction other than that shown cancels shooting.
Q The desired results may not be achieved with moving subjects, subjects close to
the camera, unvarying subjects such as the sky or a  eld of grass, subjects that are
in constant motion, such as waves and waterfalls, or subjects that undergo marked
changes in brightness. Panoramas may be blurred if the subject is poorly lit.
27More on Photography
Shooting Mode
z
z
Choose z for seamless 360° panoramas that can be played back in a loop (P62).
R The
t
t
SAVE ORG IMAGE
SAVE ORG IMAGE option in the setup menu can be used to record a v
panorama in addition to a seamless z panorama (P 117).
Q Depending on the subject and shooting conditions, the camera may produce
distorted results or a v panorama. The top and bottom of the area visible in
the shooting display are cropped out and white strips may appear at the top and
bottom of the display.
For Best Results
For Best Results
For best results, move the camera in a small circle at a steady speed, keeping the
camera horizontal and being careful only to pan in the direction shown by the
guides. If the desired results are not achieved, try panning at a di erent speed.
28 More on Photography
Shooting Mode
i PRO FOCUS
The camera takes up to three shots each time the shutter
button is pressed, softening the background to emphasize
the main subject. The amount of softening can be adjusted
before shooting by pressing the selector left or right. Use
for portraits or photos of  owers similar to those produced
by SLR cameras.
R Softening can not be applied to background objects that are too close to the main
subject. If a message stating that the camera can not create the e ect is displayed
when the camera focuses, try backing away from your subject and zooming in. The
camera may also be unable to soften the background if the subject is moving; if
prompted, check the results and try again.
29More on Photography
Shooting Mode
j PRO LOW-LIGHT
Each time the shutter button is pressed, the camera makes
four exposures and combines them into a single photo-
graph. Use to reduce noise and blur when photographing
poorly lit subjects or static subjects at high zoom ratios.
R A single combined photograph may not be created with some
scenes or if the subject or camera moves during shooting. Do not move the camera
until shooting is complete.
PRO FOCUS/PRO LOW-LIGHT
PRO FOCUS/PRO LOW-LIGHT
To save unprocessed copies of pictures taken in these modes, select ON for the
t SAVE ORG IMAGE option in the setup menu (P 117).
Q Keep the camera steady during shooting.
Q Frame coverage is reduced.
30 More on Photography
Shooting Mode
n MULTIPLE EXPOSURE
Create a photograph that combines two exposures.
1
Take the  rst shot.
2
Press MENU/OK. The  rst shot will be shown superimposed on the view
through the lens as a guide to taking the second shot.
R To return to Step 1 and retake the  rst shot, press the selector left. To save the
rst shot and exit without creating a multiple exposure, press DISP/BACK.
3
Take the second shot.
4
Press MENU/OK to create the multiple exposure, or press the selector left to
return to Step 3 and retake the second shot.
31More on Photography
Shooting Mode
i INDIVID. SHUTTER 3D
Take two shots from di erent angles to create a 3D image.
1
To choose the order in which the pictures are taken,
press the selector right to display the current order and
then press the selector left or right to choose from the
options below.
G: Take the left shot  rst.
H: Take the right shot  rst.
TURN
2
Press the shutter button to take the  rst shot.
R To exit without recording a picture, press DISP/BACK.
3
The  rst shot will be shown superimposed on the view through the lens.
Using it as a guide, frame the second shot and press the shutter release
button.
R The 3D e ect may not be visible with some sub-
jects or under some shooting conditions. For
best results, the distance the camera is moved
between shots should be about 
/
th to 
/
th of
the distance to the subject.
R The camera will turn o automatically if no operations performed for the time
selected for N AUTO POWER OFF (P 114). The  rst shot will not be saved if the
second shot is not taken before the camera turns o .
32 More on Photography
Shooting Mode
Viewing and Printing 3D Images
Viewing and Printing 3D Images
The camera displays images in 2D. Press the selector down to toggle between the
rst and second shots.
Devices equipped for 3D display, such as the FINEPIX REAL 3D V3 digital photo frame or
FINEPIX REAL 3D W3 digital camera, will display the images in 3D.
3D prints can be ordered from http://www.fujifilm.com/3d/print/
The supplied software displays 3D anaglyph images. 3D photos can also be viewed
using other applications that support the MP format.
3D TVs that support the MP format can display images in 3D. See the manual for
your TV for details.
Q Images are not output in 3D when printed directly from the camera.
Q 3D images are displayed in 2D in slide shows and when output on a conventional
TV.
Q 3D images can not be edited or retouched.
Note: The MP (Multi-Picture) format is a CIPA standard for  les containing multiple still images. Files
in MP format are referred to as “MP  les” and have the extension “*.MPO. The camera uses this
format for 3D images.
33More on Photography
Shooting Mode
SP
SP
SCENE POSITION
SCENE POSITION
The camera o ers a choice of scenes, each adapted to particular
shooting conditions or a speci c type of subject. Use the A SCENE
POSITION option in the shooting menu to choose the scene as-
signed to the SP position on the mode dial.
Scene
Scene
Description
Description
C
C
NATURAL &
NATURAL &
N
N
The camera takes two shots: one without the  ash and one with.
D
D
NATURAL LIGHT
NATURAL LIGHT
Capture natural lighting under low-light conditions.
h
h
PORTRAIT
PORTRAIT
Choose for portraits.
Z
Z
PORTRAIT
PORTRAIT
ENHANCER
ENHANCER
Choose for a smooth skin e ect when shooting portraits.
l
l
DOG
DOG
Choose when photographing dogs.
m
m
CAT
CAT
Choose when photographing cats.
M
M
LANDSCAPE
LANDSCAPE
Choose for daylight shots of buildings and landscapes.
N
N
SPORT
SPORT
Choose when photographing moving subjects.
O
O
NIGHT
NIGHT
Choose this mode for poorly lit twilight or night scenes.
H
H
NIGHT (TRIPOD)
NIGHT (TRIPOD)
Choose this mode for slow shutter speeds when shooting at night.
p
p
FIREWORKS
FIREWORKS
Slow shutter speeds are used to capture the expanding burst of light from
a  rework.
Q
Q
SUNSET
SUNSET
Choose this mode to record the vivid colors in sunrises and sunsets.
R
R
SNOW
SNOW
Choose for crisp, clear shots that capture the brightness of scenes dominat-
ed by shining white snow.
s
s
BEACH
BEACH
Choose for crisp, clear shots that capture the brightness of sunlit beaches.
34 More on Photography
Shooting Mode
Scene
Scene
Description
Description
f
f
UNDERWATER
UNDERWATER
Reduces the blue cast typically associated with underwater lighting.
U
U
PARTY
PARTY
Capture indoor background lighting under low-light conditions.
V
V
FLOWER
FLOWER
Choose for vivid close-ups of  owers.
W
W
TEXT
TEXT
Take clear pictures of text or drawings in print.
l
l
DOG/
DOG/
m
m
CAT
CAT
The camera focuses on the faces of dogs or cats that are facing the camera, and the
self-timer menu o ers a n AUTO RELEASE option that releases the shutter auto-
matically when a pet is detected (P 43). During playback, image search (P 59) can be
used to search for pictures taken in either mode.
R Although camera can detect many di erent breeds of dogs and cats, results may
vary with the breed and shooting conditions. The camera may fail to detect pets
with dark-colored faces or long hair covering their entire face. If a dog or cat is not
detected, the camera focuses on the subject at the center of the frame.
35More on Photography
Shooting Mode
M
M
MANUAL
MANUAL
In this mode, you control both shutter speed and aperture.
Press the selector up (d) to highlight shutter speed or
aperture and use the command dial to adjust the high-
lighted item. If desired, exposure can be altered from the
value selected by the camera.
SETTING SHUTTER SPEED
1000
F
3.5
The Exposure Indicator
The Exposure Indicator
The amount the picture will be under- or over-exposed at cur-
rent settings is shown by the exposure indicator.
SETTING SHUTTER SPEED
1000
F
3.5
A
A
APERTURE PRIORITY AE
APERTURE PRIORITY AE
You choose the aperture using the command dial, while the camera
adjusts shutter speed for optimal exposure.
Q If the correct exposure can not be achieved at the selected
aperture, shutter speed will be displayed in red. Adjust aper-
ture until the correct exposure is achieved. If the subject is
outside the metering range of the camera, the shutter speed
display will show “---”. Press the shutter button halfway to
measure exposure again.
F3.5
36 More on Photography
Shooting Mode
S
S
SHUTTER PRIORITY AE
SHUTTER PRIORITY AE
You choose the shutter speed using the command dial, while the
camera adjusts aperture for optimal exposure.
Q If the correct exposure can not be achieved at the selected
shutter speed, aperture will be displayed in red. Adjust shut-
ter speed until the correct exposure is achieved. If the subject
is outside the metering range of the camera, the aperture
display will show “F ---”. Press the shutter button halfway to
measure exposure again.
1000
P
P
PROGRAM AE
PROGRAM AE
The camera sets exposure automatically.
Q If the subject is outside the metering range of the camera, the shutter speed and
aperture displays will show “---”. Press the shutter button halfway to measure expo-
sure again.
37More on Photography
Focus Lock
Focus Lock
To compose photographs with o -center subjects:
1
Focus:
Position the subject in the focus frame ( )
and press the shutter button halfway to lock focus
and exposure. Focus and exposure will remain locked
while the shutter button is pressed halfway (AF/AE
lock).
2
Recompose: Keep the button pressed halfway.
3
Shoot: Press the button all the way down.
38 More on Photography
Focus Lock
Autofocus
Autofocus
Although the camera boasts a high-precision autofocus system, it may be unable to
focus on the subjects listed below. If the camera is unable to focus, focus on another
subject at the same distance and use focus lock to recompose the photograph.
Very shiny subjects such as mirrors or car bodies.
Fast-moving subjects.
Subjects photographed through a window or other re-
ective object.
Dark subjects and subjects that absorb rather than re ect
light, such as hair or fur.
Insubstantial subjects, such as smoke or  ame.
Subjects that show little contrast with the background
(for example, subjects in clothing that is the same color
as the background).
Subjects positioned in front of or behind a high-contrast
object that is also in the focus frame (for example, a
subject photographed against a backdrop of highly con-
trasting elements).
39More on Photography
d
d
Exposure Compensation
Exposure Compensation
To adjust exposure compensation when photographing
very bright, very dark, or high-contrast subjects, press
the selector up (d). Press the selector up or down or
use the command dial to choose an exposure compen-
sation value and then press MENU/OK.
Choose positive (+) values
to increase exposure
Choose negative (–) values
to reduce exposure
R A d icon and exposure indicator are displayed at settings other than ±0. Exposure
compensation is not reset when the camera is turned o ; to restore normal expo-
sure control, choose a value of ±0.
R Turn the  ash o when using exposure compensation.
40 More on Photography
F
F
Macro Mode (Close-ups)
Macro Mode (Close-ups)
For close-ups, press the selector left (F) and select F.
When macro mode is in e ect, the camera focuses on
subjects near the center of the frame. Use the zoom
control to compose pictures (P 18).
To exit macro mode, press the selector left (F) and select
OFF.
MACRO
OFF
P
Close-up shots
R Use of a tripod is recommended to prevent blur caused by camera shake.
R The shadow cast by the lens may appear in photographs taken with the  ash at
very short ranges. Zoom out or increase the distance to the subject.
41More on Photography
N
N
Using the Flash (Super-Intelligent Flash)
Using the Flash (Super-Intelligent Flash)
When the  ash is used, the cameras Super-Intelligent Flash system instantly
analyzes the scene based on such factors as the brightness of the subject,
its position in the frame, and its distance from the camera. Flash output and
sensitivity are adjusted to ensure that the main subject is correctly exposed
while preserving the e ects of ambient background lighting, even in dimly-lit
indoor scenes. Use the  ash when lighting is poor, for example when shoot-
ing at night or indoors under low light.
1
Press the  ash pop-up button to raise the  ash.
2
Press the selector right (N) and choose from the fol-
lowing  ash modes:
Option
Option
Description
Description
AUTO
AUTO
/
/
K
K
*
The  ash  res when required. Recommended in most
situations.
N
N
/
/
L
L
*
The  ash  res whenever a picture is taken. Use for back-
lit subjects or for natural coloration when shooting in
bright light.
O
O
/
/
M
M
*
Capture both the main subject and the background
under low light (note that brightly lit scenes may be
overexposed).
AUTO FLASH
According to
shooting conditions
P
* J
icon indicates that Intelligent Face Detection and red-eye removal are on and will be used
to minimize red-eye caused by the  ash re ecting from the retinas of portrait subjects.
42 More on Photography
N Using the Flash (Super-Intelligent Flash)
R Changing the angle of the  ash turns the  ash o .
R Lower the  ash where  ash photography is prohibited or to capture natural lighting
under dim light. We also recommend that you lower the  ash when the camera is
o .
R If the  ash will  re, p will be displayed when the shutter button is pressed halfway.
At slow shutter speeds, k will appear in the display to warn that pictures may be
blurred; use of a tripod is recommended.
R The  ash may  re several times with each shot. Do not move the camera until
shooting is complete.
R The  ash may cause vignetting.
43More on Photography
h
h
Using the Self-Timer
Using the Self-Timer
To use the self-timer, press the selector down (h) and
choose from the following options:
OFF
OFF
P
Option
Option
Description
Description
T (OFF)
Self-timer o .
n ( AUTO RELEASE)
The shutter is released automatically when the camera detects the face of a cat
or dog (P 34).
o ( AUTO RELEASE)
The shutter is released automatically when the camera detects a human portrait
subject facing the camera. Use for portraits of babies.
S (10 SEC)
The shutter is released ten seconds after the shutter button is pressed. Use for
self-portraits. The self-timer lamp on the front of the camera lights when the
timer starts and begins to blink shortly before the photo is taken.
R (2 SEC)
The shutter is released two seconds after the shutter button is pressed. Use to
reduce blur caused by the camera moving when the shutter button is pressed.
The self-timer lamp will blink as the timer counts down.
44 More on Photography
The Fn Button
The Fn Button
The role played by the Fn button can be se-
lected using the F Fn BUTTON option in the
setup menu (P114).
The following options are available:
ISO (P90)/IMAGE SIZE (P91)/IMAGE QUALITY (P94)/
RAW (F770EXR Only) (P117)/DYNAMIC RANGE (P95)/
FILM SIMULATION (P93)/PHOTOMETRY (P98)/AF MODE (P99)/
FACE RECOGNITION (P51)/FACE DETECTION (P45)/
LANDMARK NAVIGATOR (F770EXR Only) (P71)
R The F Fn BUTTON menu can also be displayed by pressing and holding the Fn
button.
45More on Photography
b
b
Intelligent Face Detection
Intelligent Face Detection
Intelligent Face Detection sets focus and exposure for human faces anywhere
in the frame, preventing the camera from focusing on the background in
group portraits. Choose for shots that emphasize portrait subjects.
To use Intelligent Face Detection, press MENU/OK to dis-
play the shooting menu and select ON for b FACE
DETECTION. Faces can be detected with the camera
in vertical or horizontal orientation; if a face is detected,
it will be indicated by a green border. If there is more
than one face in the frame, the camera will select the
face closest to the center; other faces are indicated by
white borders.
Q In some modes, the camera may set exposure for the frame as a whole rather than
the portrait subject.
Q If the subject moves as the shutter button is pressed, their face may not be in the
area indicated by the green border when the picture is taken.
46 More on Photography
R
R
Continuous Shooting
Continuous Shooting
To capture motion in a series of pictures, press MENU/OK,
select RCONTINUOUS in the shooting menu (P 97),
and choose from the options listed in this section.
Option
Option
F770EXR
F770EXR
F750EXR
F750EXR
O
O
AE BKT
AE BKT
(
(
P
P
50)
50)
X
X
FILM SIMULATION BKT
FILM SIMULATION BKT
(
(
P
P
50)
50)
Y
Y
DYNAMIC RANGE BKT
DYNAMIC RANGE BKT
(
(
P
P
50)
50)
I
I
TOP
TOP
n
n
(
(
P
P
47)
47)
(
(
P
P
47)
47)
P
P
BEST FRAME CAPTURE
BEST FRAME CAPTURE
(
(
P
P
48)
48)
L
L
FINAL
FINAL
n
n
(
(
P
P
48)
48)
OFF
OFF
R The  ash turns o automatically. The previously selected  ash mode is restored
when OFF is selected for R CONTINUOUS.
R Frame rate varies with shutter speed.
R Focus and exposure are determined by the  rst frame in each series.
R The number of pictures that can be taken in a single burst varies with the scene
and camera settings. The number of pictures that can be recorded depends on the
memory available.
47More on Photography
R Continuous Shooting
ITOP n (F770EXR)
The camera takes photographs while the shutter button is pressed. To choose
the frame rate:
1
Press the selector right when the camera is in shooting
mode.
2
Press the selector up or down to choose a frame rate
and press MENU/OK to select and return to shooting
mode.
ITOP n (F750EXR)
The camera takes photographs while the shutter button is pressed. To choose
the frame rate and maximum number of shots per burst:
1
Press the selector right when the camera is in shooting
mode.
2
Highlight the current frame rate or number of shots and
press the selector right, then press selector up or down
to choose a new value and press MENU/OK to select.
3
Press DISP/BACK to return to shooting mode when settings are complete.
CONTINUOUS SHOOTING SETUP
11
frames/s
8
frames/s
5
frames/s
3
frames/s
CONTINUOUS SHOOTING SETUP
NUMBER OF FRAMES 4
SHOOTING SPEED
48 More on Photography
R Continuous Shooting
LFINAL n (F750EXR Only)
The camera takes up to 40 pictures, but only
the last shots are recorded. The number of
shots recorded can be selected by press-
ing the selector right while the camera is in
shooting mode.
R Only one photo is taken if the self-timer is used.
Up to 40 shots
Shutter button
pressed
Shutter button
released
Final n shots recorded
PBEST FRAME CAPTURE (F770EXR Only)
The camera takes a series of pictures, starting before and ending after the
shutter button is pressed.
1
Press the selector right when the camera is in shooting mode.
2
Highlight the current frame rate and press the selector right, then press
selector up or down to choose a new value and press MENU/OK to select.
Q Some frame rates may reduce the number of shots available.
3
Highlight the number of shots and press the selector
right. Press the selector up or down to choose the num-
ber of shots in each burst and left or right to choose
their distribution (the number on the left is taken before
and the number on the right after the shutter button
is pressed). Press MENU/OK when settings are complete
and press DISP/BACK to return to shooting mode.
Shots per burst
CONTINUOUS SHOOTING SETUP
SET CANCEL
FRAMES8
SHUTTER
16
Distribution
49More on Photography
R Continuous Shooting
4
Take photographs. The camera begins recording while the shutter button
is pressed halfway, and completes the burst when the shutter button is
pressed all the way down. The illustration shows a burst of eight shots,
three before the shutter button is pressed and four after.
Shutter button
pressed halfway
Shutter button pressed all
the way down
“Before” shots After” shots
Q If the shutter button is pressed all the way down before the number of frames
selected for the “before portion is recorded, the remaining frames will be taken
after the shutter button is pressed all the way down.
Q If the shutter button is pressed halfway for an extended period, the camera may
record the burst before the shutter button is pressed all the way down.
50 More on Photography
R Continuous Shooting
OAE BKT
Each time the shutter button is pressed, the camera takes three shots: one us-
ing the metered value for exposure, the second overexposed by the amount
selected for JAE BKT EV STEPS in the shooting menu (P 100), and the third
underexposed by the same amount (the camera may not be able to use the
selected bracketing increment if the amount of over- or under- exposure ex-
ceeds the limits of the exposure metering system).
XFILM SIMULATION BKT
Each time the shutter button is pressed, the camera takes one shot and pro-
cesses it to create three copies with di erent PFILM SIMULATION settings
(P 93): cPROVIA/STANDARD for the  rst, dVelvia/VIVID for the second,
and eASTIA/SOFT for the third.
YDYNAMIC RANGE BKT
Each time the shutter button is pressed, the camera takes three shots at di er-
ent UDYNAMIC RANGE settings (P 95): V 100% for the  rst, W 200% for
the second, and X 400% for the third (NISO can not exceed 3200; values
less than 400 are not available when O is selected for OIMAGE SIZE).
51More on Photography
n
n
Face Recognition
Face Recognition
The camera can store information on the face and personal
details (name, relationship, and birth date) of portrait sub-
jects and assign these subjects priority for Intelligent Face
Detection or display their names and other information
during playback.
Happy Birthday!
Adding New Faces
Adding New Faces
Follow the steps below to add faces to the face recognition database.
1
Select REGISTER.
Select REGISTER for n FACE RECOGNITION in the shooting menu.
R To disable face recognition, select OFF.
2
Take a photograph.
After checking that the subject is facing the camera,
frame the subject using the guides and take the pho-
tograph.
R If an error is displayed, take the photograph again.
CANCEL
REGISTER FACE
CAPTURE THE FACE
ALONG WITH THE GUIDLINE
52 More on Photography
n Face Recognition
3
Enter face recognition data
Press MENU/OK to display face recognition data and enter the following in-
formation:
NAME: Enter a name of up to 14 characters and press MENU/OK.
BIRTHDAY: Enter the subject’s date of birth and press MENU/OK.
CATEGORY: Choose the option that describes your relationship to the sub-
ject and press MENU/OK.
R If you attempt to zoom in on the face of a person indicated by a green border
in the face recognition database on their birthday, the camera will display their
name and the message “Happy Birthday!”
53More on Photography
n Face Recognition
Viewing, Editing, and Deleting Existing Data
Viewing, Editing, and Deleting Existing Data
Follow the steps below to view, edit, or delete face recognition data.
1
Select VIEW & EDIT for n FACE RECOGNITION.
2
Select a face.
3
View or edit face recognition data.
The name, category, or birth date can be edited as described in Step 3 of
Adding New Faces (P 52). To retake the photo, select REPLACING IMAGE
and shoot a new portrait as described above.
R To delete face recognition data for the selected subject, select ERASE.
Adding Faces Automatically
Adding Faces Automatically
To automatically add frequently-photographed subjects to the face recogni-
tion database, select ON for AUTO REGISTRATION in the face recognition
menu. If the camera detects a face that has been photographed many times
without being added to the database, it will display a message prompting you
to create a new face recognition entry. Press MENU/OK and enter face recogni-
tion data.
R The camera may sometimes fail to recognize new faces automatically. If necessary,
faces can be added manually using the REGISTER option.
54 More on Photography
n Face Recognition
Face Recognition
Face Recognition
The camera can store up to eight faces. If you attempt to add a ninth face, a con r-
mation dialog will be displayed; use VIEW & EDIT to make room for new faces by
deleting existing data. AUTO REGISTRATION is disabled if there are already data for
eight faces.
When Intelligent Face Detection (P 45) is on and the frame contains multiple subjects
from the face recognition database, the camera displays the name of the subject
that will be used to set focus and exposure (the subject shown by the green frame).
If no name is entered, the camera will show “---”. Subjects identi ed using face rec-
ognition but not used to set focus and exposure are shown by orange frames, other
subjects by white frames.
Q The camera may fail to identify subjects in the face recognition database if they
are not facing the camera or are only partly in the frame, or if details of the sub-
jects’ faces or expressions di er markedly from those in the database.
55
More on Playback
More on Playback
Playback Options
Playback Options
To view the most recent picture in the LCD monitor, press the a button.
100-0001
100-0001
Press the selector right to view pictures in the order recorded, left to view
pictures in reverse order. Keep the selector pressed to scroll rapidly to the
desired frame.
R Pictures taken using other cameras are indicated by a m (“gift image”) icon during
playback.
Continuous Shooting
Continuous Shooting
In the case of pictures taken in continuous shooting mode, only the  rst frame
of each series will be displayed. Press the selector down to view the other
pictures in the series.
I
I
Favorites: Rating Pictures
Favorites: Rating Pictures
To rate the picture currently displayed in full-frame playback, press DISP/BACK
and press the selector up and down to select from zero to  ve stars.
56 More on Playback
Playback Options
Playback Zoom
Playback Zoom
Select i to zoom in on pictures displayed in single-frame playback; select
j to zoom out. When the picture is zoomed in, the selector can be used to
view areas of the image not currently visible in the display.
Navigation window shows
portion of image currently
displayed in LCD monitor
Zoom indicator
Press DISP/BACK to exit zoom.
R Rotate the command dial to view other pictures without changing the zoom ratio.
R The maximum zoom ratio varies with image size. Playback zoom is not available
with cropped or resized copies saved at a size of a or smaller.
57More on Playback
Playback Options
Multi-Frame Playback
Multi-Frame Playback
Selecting j when a picture is shown full-frame in the LCD monitor displays
the current image with previous and following images in the background.
Select j to increase the number of images displayed to two, nine, or one
hundred, i to view fewer images.
100-0001
100-0001
When two or more images are displayed, use the selector to highlight images
and press MENU/OK to view the highlighted image full frame. In the nine- and
hundred-frame displays, use the selector to view more pictures.
58 More on Playback
A
A
Deleting Pictures
Deleting Pictures
To delete individual pictures, multiple selected
pictures, or all pictures, press MENU/OK, select
A ERASE (P 103), and choose from the options
below. Note that deleted pictures can not be re-
covered. Copy important pictures to a computer or other storage device before
proceeding.
Option
Option
Description
Description
FRAME
FRAME
Press the selector left or right to scroll through pictures and press MENU/OK to delete
the current picture (a con rmation dialog is not displayed).
SELECTED
SELECTED
FRAMES
FRAMES
Highlight pictures and press MENU/OK to select or deselect (pictures in photobooks
or print orders are shown by S). When the operation is complete, press DISP/BACK
to display a con rmation dialog, then highlight OK and press MENU/OK to delete the
selected pictures.
ALL FRAMES
ALL FRAMES
A con rmation dialog will be displayed; highlight OK and press MENU/OK to delete all
unprotected pictures (if a memory card is inserted, only the pictures on the memory
card will be a ected; the pictures in internal memory are only deleted if no memory
card is inserted). Pressing DISP/BACK cancels deletion; note that any pictures deleted
before the button was pressed can not be recovered.
R Protected pictures can not be deleted. Remove protection from any pictures you
wish to delete (P 105).
R If a message appears stating that the selected images are part of a DPOF print order,
press MENU/OK to delete the pictures.
PLAYBACK MENU
ERASE
OFF
FRAME
SELECTED FRAMES
ALL FRAMES
BACK
59More on Playback
b
b
Image Search
Image Search
Search for pictures.
1
Select b IMAGE SEARCH in the playback menu (P 103), highlight one of
the following search criteria, and press MENU/OK:
BY DATE: Search by date.
BY GPS LOCATION NAME (F770EXR Only): Search by location name (location
names that do not begin with a letter from A to Z are listed in the search
conditions under “#”).
BY FACE: Search for faces from the face recognition database.
BY
I FAVORITES: Search by rating.
BY SCENE: Search by scene.
BY TYPE OF DATA: Find all still pictures or all movies.
BY UPLOAD MARK: Find all pictures selected for upload to a speci ed desti-
nation.
2
Select a search condition. Only pictures that match the search condition
will be displayed. To delete or protect selected pictures or to view the
search results in a slide show, press MENU/OK and choose A ERASE (P 103),
D PROTECT (P 105), or I SLIDE SHOW (P 102).
60 More on Playback
m
m
PhotoBook Assist
PhotoBook Assist
Create books from your favorite photos.
Creating a PhotoBook
Creating a PhotoBook
1
Select NEW BOOK for m PHOTOBOOK ASSIST in the playback menu
(P 101) and choose from the following options:
SELECT FROM ALL: Choose from all available pictures.
SELECT BY IMAGE SEARCH: Choose from pictures matching selected search
conditions (P
59).
R Movies, 3D photos, and photographs a or smaller can not be selected for pho-
tobooks.
2
Scroll through the images and press the selector up to select or deselect.
To display the current image on the cover, press the selector down. Press
MENU/OK to exit when the book is complete.
R The  rst picture selected becomes the cover image. Press the selector down to
select a di erent image for the cover.
3
Select COMPLETE PHOTOBOOK (to select all photos or all photos match-
ing the speci ed search conditions for the book, choose SELECT ALL). The
new book will be added to the list in the photobook assist menu.
Q Books can contain up to 300 pictures.
Q Books that contain no photos are automatically deleted.
61More on Playback
m PhotoBook Assist
Viewing Photobooks
Viewing Photobooks
Highlight a book in the photobook assist menu and press MENU/OK to display
the book, then press the selector left or right to scroll through the pictures.
Editing and Deleting Photobooks
Editing and Deleting Photobooks
Display the photobook and press MENU/OK. The following options will be dis-
played; select the desired option and follow the on-screen instructions.
EDIT: Edit the book as described in “Creating a PhotoBook” (P 60).
ERASE: Delete the book.
Photobooks
Photobooks
Photobooks can be copied to a computer using the supplied MyFinePix Studio soft-
ware.
62 More on Playback
Viewing Panoramas
Viewing Panoramas
If you press the selector down when a panorama is displayed full frame, the
camera will play back the picture from left to right or from bottom to top. To
pause playback, press the selector down; press the selector down again to
resume. To exit to full-frame playback, press the selector up while panorama
playback is in progress. Once displayed in full-frame playback, panoramas can
be zoomed in or out using the zoom control or deleted by pressing the selec-
tor up (
b).
PLAY
STOP PAUSE
R z panoramas play back in an endless loop (P27); the playback direction can be
controlled by pressing the selector left or right. The camera will not turn o auto-
matically while playback is in progress (P114).
63More on Playback
Viewing Photo Information
Viewing Photo Information
Photo information can be viewed by pressing DISP/BACK to cycle through indi-
cators (P 6) until the following display appears:
:
:
:
:OFF
ISO
400
1/250
F
4.5
2
3
-
1
12/31/2050 10:00
AM
100-0001
4:3
N
STD
q
Dynamic range
w
Image size and quality
e
Sensitivity
r
Shutter speed/aperture
t
Film simulation
y
Flash mode
u
White balance
i
Exposure compensation
o
Frame number
!0
Picture (overexposed areas blink on and o )
!1
Histogram
Histograms
Histograms
Histograms show the distribution of tones in the im-
age. Brightness is shown by the horizontal axis, the
number of pixels by the vertical axis.
Pixel brightness
No. of
pixels
Shadows Highlights
Optimal exposure: Pixels are distributed in an even
curve throughout the tone range.
Overexposed: Pixels are clustered on the right side of
the graph.
Underexposed: Pixels are clustered on the left side of
the graph.
64 More on Playback
Viewing Photo Information
Zooming in on the Focus Point
Zooming in on the Focus Point
Press the selector down to zoom in on the focus point. Press
DISP/BACK or MENU/OK to return to full-frame playback.
65
GPS (F770EXR Only)
GPS (F770EXR Only)
Recording GPS Data with Pictures
Recording GPS Data with Pictures
To record GPS data with new pictures, press the F but-
ton and select one of the following options for RSET-
UP> LOCATION SEARCH in the F-mode menu (P 92).
PERMANENTLY ON: The camera continues to update GPS data for up to 3 hours
after being turned o . The camera will be quicker to display GPS data when
turned on, but the drain on the battery will increase. Note that GPS data is
not updated at battery levels of
B or below.
WHEN SWITCHED ON: The camera updates GPS data only when on. The camera
may need some time to acquire GPS data when turned on. This option is
selected automatically at battery levels of
B and below.
R GPS works best outdoors under clear skies.
During shooting, GPS data are displayed in the monitor as
shown at right. Signal strength is indicated by the number
of bars; O is displayed when the camera is searching for
a signal, Q if the camera is in GPS demo mode, and P if
no signal is detected. The most current location is shown
by a place name or (if no place name is available) by the
longitude and latitude.
R LOCATION INFO (P 92) can be used to choose whether the camera shows place
names or latitude and longitude. Choose OFF to hide GPS information.
Location Signal
strength
P
-
MINATO, TOKYO, JAPAN
66 GPS
Recording GPS Data with Pictures
Q Using GPS increases the drain on the battery, causing battery performance to drop
at low temperatures.
Q The receiver may have an error of a few hundred meters (yards).
Q The camera may be unable to receive GPS data in some locations. If possible,
choose an outdoor location with few obstructions when turning the camera on.
Q The position recorded when a photo is taken may di er from the actual location if
some time has passed since the camera was last able to update GPS data.
Q Select OFF for LOCATION SEARCH (P 92) and TRACKING DATA (P 92) in the
R SET-UP menu when in a hospital and before takeo and landing if traveling
by air.
Q Place names are current as of the date on which the map database was created
(P 139) and will not be updated to re ect any changes after that date.
Q Place name data are unavailable in some countries and regions. If no name is avail-
able, the latitude and longitude will be displayed for a few seconds.
GPS
GPS
The camera may be unable to receive GPS data if the antenna (P 2) is obstructed or
when underground, underwater, under a bridge or overpass, inside a vehicle, build-
ing, tunnel, or metal briefcase, between tall buildings, or in the vicinity of cell phones
or other devices that broadcast in the 1.5 GHz band.
Obey all local regulations regarding the use of GPS devices. Note that the use of
GPS devices is restricted in some countries, including the People’s Republic of China.
Before going abroad, consult with the embassy or a travel agent. The camera may
display P (no signal) in locations in which restrictions apply.
67GPS
GPS Tracking
GPS Tracking
To record a GPS track log to a  le on the memory card, select ON for R SET-UP>
TRACKING DATA (P 92; be sure the clock is set to the correct time and date as de-
scribed on page 16). A new log  le is created when ON is selected and once every
24 hours thereafter. Note that the camera will continue to update GPS data even
when o , increasing the drain on the battery.
Q GPS logs can be viewed in MyFinePix Studio.
Q See “GPS” (
P 66) for information on using GPS.
Q The indicator lamp glows orange during recording GPS data even when the cam-
era is turned o while ON is selected. Select OFF before removing the battery or
memory card. Failure to observe this precaution could damage the card.
Q Tracking ends after the camera has been o for 3 hours consecutively.
Q Signal strength will be displayed in yellow and GPS data will not be logged if the
battery is low (B or less), no memory card is inserted, or the memory card has less
than 32 MB free. To resume the log, select ON after inserting a charged battery or a
memory card with more than 32 MB free.
Q GPS tracking may be interrupted during movie recording and playback.
68 GPS
GPS Tracking
Using GPS to Set the Camera Clock
Using GPS to Set the Camera Clock
The AUTO TIME CORRECTION item in the R SET-UP menu can be used to syn-
chronize the camera clock to the time provided by GPS satellites. Select ON (W/o
SUMMERTIME) to set the clock to local standard time or ON (W/ SUMMERTIME) to
set the clock to local daylight saving time. If daylight saving time is in e ect, time will
automatically be advanced one hour.
Q If the camera is able to receive GPS data, the clock will be synchronized when the camera
is turned o .
Q Selecting g LOCAL for N TIME DIFFERENCE turns AUTO TIME CORRECTION o . Note
that GPS may not provide the correct time in some locations; if necessary select OFF for
AUTO TIME CORRECTION and set the clock using
F
F
DATE/TIME
DATE/TIME (P 111).
69GPS
Viewing GPS Data
Viewing GPS Data
During playback, pictures for which GPS data exist are in-
dicated by a J icon. GPS data are shown for a few sec-
onds each time the picture is displayed.
GPS icon
100-0001
100-0001
-
MINATO, TOKYO, JAPAN
Photo Navigation
Photo Navigation
To show the direction and distance from your present position to the location
where a picture was taken:
1
Select an option other than OFF for R SET-UP> LOCATION SEARCH and
con rm that the camera is receiving GPS data (P
102
).
2
Display a picture with a J icon.
3
Select R PHOTO NAVIGATION in the playback menu
(P 101). The approximate direction and distance to the
location where the picture was taken are displayed as
shown, using the units selected for R SET-UP> km/mile
(P 102). Distances over 1000 units are indicated by “>”, those
under 100 units by “<”.
NE
<100
m
NE
<100
m
100-0001
100-0001
-
MINATO, TOKYO, JAPAN
R Photo navigation ends when the next picture is displayed.
70 GPS
Viewing GPS Data
Copying GPS Data to Other Images
Copying GPS Data to Other Images
GPS data can be copied from other pictures to images that lack correct GPS
information.
1
Select R LOCATION INFO COPY in the playback menu (P 103).
2
Press the selector left or right to display the source image for the GPS data
and press MENU/OK.
3
Press the selector left or right to display the destination and press MENU/OK
to copy the data to the image.
Q GPS data can not be deleted. When GPS data are copied, however, the original GPS
data for the destination image is replaced by the data for the source image; the
original data for the destination image, if any, can not be recovered.
Q The camera may be unable to copy GPS data to or from images created on other
devices.
71GPS
R
R
Landmark Navigator
Landmark Navigator
Landmark navigation uses GPS and the camera map da-
tabase to show information on objects the display (this is
sometimes known as augmented reality, or AR). To view
landmark information, select R LANDMARK NAVIGA-
TOR in the F-mode menu (P 101, 90).
DIST:
20
m
N
NNE
NNW
FUJIFILM
The display varies with camera orientation:
For an AR” display, hold the camera
with the lens pointed forward.
For a radar display, hold the cam-
era with the lens pointed down.
DIST:
20
m
NNNENNW
FUJIFILM
DIST:
DIST:
20
m
FUJIFILM
m
R Use the zoom control to zoom in and out. To display additional information, press
the selector left or right to highlight landmarks and press MENU/OK. Press the selec-
tor down to choose the landmark type. Press DISP/BACK to return to playback or
press the shutter button halfway to exit to shooting mode.
R Landmarks can be added using RMY LANDMARK REGISTER (P 97).
72 GPS
R Landmark Navigator
Q Landmark information is based on the most recently-received GPS data; it is intend-
ed as a guide only and may be unavailable or contain errors under some conditions,
including when the camera is held upside down. Headings rely on a magnetic
compass and may not be correct if the camera is inside a building or vehicle or
close to metal objects, magnets, high-voltage power lines, or electrical equipment.
Calibration
Calibration
A f icon indicates that the camera’s internal sensor requires
calibration. Move the camera slowly in a large  gure eight while
rotating your wrist as shown.
DIST:
20
m
NNNENNW
FUJIFILM
COMPASS FACES INTERFERENCE
ROTATE THE CAMERA AS FIGURE 8
If the icon does not clear from the display, choose a di erent location and try again.
Q To ensure that you do not drop the camera, use the strap (P1).
73
Movies
Movies
Recording Movies
Recording Movies
Press F to shoot a movie. During recording, the following indica-
tors will be displayed and sound will be recorded via the built-in
microphone (be careful not to cover the microphone during re-
cording).
1
1
REC
999m59s
999m59s
F
F
y REC icon
Time remaining
Number of photos that
can be taken during
recording
To end recording, press the F button again. Recording ends automatically
when the movie reaches maximum length or memory is full.
R Zoom can be adjusted while recording is in progress.
R If the subject is poorly lit, the AF-assist lamp may light to assist the focus operation.
To turn the AF-assist lamp o , select OFF for C AF ILLUMINATOR in the setup
menu (P 117).
R Focus, exposure, and white balance are adjusted automatically throughout record-
ing. The color and brightness of the image may vary from that displayed before
recording begins.
R Sounds made by the camera may be recorded.
74 Movies
Recording Movies
Taking Photographs During Recording
Taking Photographs During Recording
Press the shutter button to take a photograph during recording.
R See page 100 for information on choosing how photographs are recorded.
R The photo is saved separately from the movie and does not appear as part of the movie.
Q Photos can not be taken while a high-speed movie is being recorded.
Q The number of photos that can be taken is limited.
Q The indicator lamp lights while movies are being recorded. Do not open the bat-
tery chamber during shooting or while the indicator lamp is lit. Failure to observe
this precaution could prevent the movie from being played back.
Q Vertical or horizontal streaks may appear in movies containing very bright subjects.
This is normal and does not indicate a malfunction.
Q The temperature of the camera may rise if it is used to record movies for an ex-
tended period or if the ambient temperature is high. This is normal and does not
indicate a malfunction.
Movie Frame Size
Movie Frame Size
Before recording, select a frame size using the WMOVIE MODE option in the
shooting menu (P 100).
Option
Option
Description
Description
i 1920 (1920 × 1080) Full HD (High De nition).
h 1280
(1280 × 720)
High De nition.
f ( 640 × 480) Standard de nition.
k 640 × 480 (80 fps)
High speed movie. Sound is not recorded, and focus, exposure, and white
balance are not adjusted automatically. Black bands appear at the top and
bottom of movies recorded at k 320 × 112.
k 320 × 240 (160 fps)
k 320 × 112 (320 fps)
75Movies
Viewing Movies
Viewing Movies
During playback, movies are displayed in the LCD monitor
as shown at right. The following operations can be per-
formed while a movie is displayed:
Option
Option
Description
Description
Start/pause
Start/pause
playback
playback
Press the selector down to start playback. Press again to
pause. While playback is paused, you can press the selec-
tor left or right to rewind or advance one frame at a time.
End playback/
End playback/
delete
delete
Press the selector up to end playback.
Adjust speed
Adjust speed
Press the selector left or right to adjust playback speed dur-
ing playback.
Adjust volume
Adjust volume
Press MENU/OK to pause playback and display volume con-
trols. Press the selector up or down to adjust the volume
and press MENU/OK to exit. Volume can also be adjusted
from the setup menu.
PLAY
100-006
100-006
12 /31 /2050
12 /31 /2050
10: 00
AM
10: 00
AM
Playback Speed
Playback Speed
Press the selector left or right to adjust playback speed. Speed is
shown by the number of arrows (M or N).
Arrow
STOP PAUSE
5m42s
5m42s
Q Do not cover the speaker during playback.
76
Connections
Connections
Viewing Pictures on TV
Viewing Pictures on TV
Connect the camera to a TV to show pictures to a group.
1
Turn the camera o .
2
Connect the supplied A/V cable as shown below.
Insert into
USB multi-connector
Connect yellow plug to video-in jack
Connect white plug to audio-in jack
R Image quality drops during movie playback.
77Connections
Viewing Pictures on TV
Connecting the Camera to High De nition (HD) TVs
Connecting the Camera to High De nition (HD) TVs
An HDMI cable (available from third-party suppliers) can be used to connect the
camera to High De nition (HD) devices (playback only). The USB and A/V cables
can not be used while an HDMI cable is connected.
Insert into HDMI connector
HDMI mini connector
Insert into HDMI
connector
R When an HDMI cable is connected, pictures and sound are played back on the TV.
Q When connecting cables, be sure the connectors are fully inserted.
3
Tune the television to the video or HDMI input channel. See the documen-
tation supplied with the television for details.
4
Press the a button for about a second to turn the camera on. The camera
monitor turns o and pictures and movies are played back on the TV. Note
that the camera volume controls have no e ect on sounds played on the
TV; use the television volume controls to adjust the volume.
78 Connections
Printing Pictures via USB
Printing Pictures via USB
If the printer supports PictBridge, the camera can be connected
directly to the printer as shown below and pictures can be printed
without  rst being copied to a computer. Note that depending on
the printer, not all the functions described below may be supported.
1
Connect the supplied USB cable as shown and turn the printer on.
2
Turn the camera on.
3
Press the selector left or right to display a picture you wish to print.
4
Press the selector up or down to choose the number of copies (up to 99).
5
Repeat steps 3–4 to select additional pictures. Press MENU/OK to display a
con rmation dialog when settings are complete.
79Connections
Printing Pictures via USB
6
Press MENU/OK to start printing. Printing can be interrupted by pressing
DISP/BACK, but note that some printers may not respond immediately. If the
printer stops before printing is complete, turn the camera o and then on
again.
7
After con rming that PRINTING has cleared from the camera display, turn
the camera o and disconnect the USB csable.
R Pictures can be printed from internal memory or a memory card that has been
formatted in the camera.
R If no pictures are selected, the camera will print one copy of the current picture.
R Page size, print quality, and border selections are made using the printer.
Printing the Date of Recording
Printing the Date of Recording
To print the date of recording on pictures, press DISP/BACK in the PictBridge display
and select PRINT WITH DATE s in the PictBridge menu (to print pictures without
the date of recording, select PRINT WITHOUT DATE). Some printers do not support
date printing. See the printer manual for details.
80 Connections
Printing Pictures via USB
Printing the DPOF Print Order
Printing the DPOF Print Order
The KPRINT ORDER (DPOF) option in the playback menu can be used to
create a digital “print order” for PictBridge-compatible printers (P 120) or de-
vices that support DPOF.
DPOF
DPOF
DPOF (Digital Print Order Format) is a standard that allows pictures to be
printed from “print orders stored in internal memory or on a memory card.
The information in the order includes the pictures to be printed and the
number of copies of each picture.
1
Select playback mode and press MENU/OK to display the playback menu.
2
Highlight KPRINT ORDER (DPOF) and press MENU/OK.
3
Highlight one of the following options and press MENU/OK:
WITH DATE s: Print the date of recording on pictures.
WITHOUT DATE: Do not print the date of recording on pictures.
R Some printers do not support date printing. See the printer manual for details.
4
Press the selector left or right to display a picture you wish to add to or
remove from the print order.
81Connections
Printing Pictures via USB
5
Press the selector up or down to choose the number of copies (up to 99).
To remove a picture from the print order, press the selector down until the
number of copies is zero.
6
Repeat Steps 4 5 to complete the print order and press MENU/OK when
settings are complete.
7
A con rmation dialog will be displayed. Press MENU/OK to save the print
order.
R Remove the memory card to create or modify a print order for the pictures in
internal memory.
R Print orders can contain a maximum of 999 pictures.
R If a memory card is inserted containing a print order created by another camera,
a message will be displayed. Create a new print order as described above.
82 Connections
Viewing Pictures on a Computer
Viewing Pictures on a Computer
The supplied software can be used to copy pictures to a computer, where
they can be stored, viewed, organized, and printed. Before proceeding, install
the software as described below. Do NOT connect the camera to the computer
until installation is complete.
Windows: Installing MyFinePix Studio
Windows: Installing MyFinePix Studio
1
Con rm that the computer meets the following system requirements:
Windows 7 (SP 1)/Windows Vista (SP 2)
Windows 7 (SP 1)/Windows Vista (SP 2)
1
1
Windows XP (SP 3)
Windows XP (SP 3)
1
1
CPU
CPU
3 GHz Pentium 4 or better
3 GHz Pentium 4 or better
(2.4
(2.4
GHz Core 2 Duo or better)
GHz Core 2 Duo or better)
2
2
2 GHz Pentium 4 or better
2 GHz Pentium 4 or better
(2.4
(2.4
GHz Core 2 Duo or better)
GHz Core 2 Duo or better)
2
2
RAM
RAM
1 GB or more
1 GB or more
512 MB or more
512 MB or more
(1
(1
GB or more)
GB or more)
2
2
Free disk space
Free disk space
2 GB or more
2 GB or more
GPU
GPU
Supports DirectX 9 or later
Supports DirectX 9 or later
(
(
recommended
recommended
)
)
Supports DirectX 7 or later
Supports DirectX 7 or later
(
(
required; performance not guaranteed with other GPUs
required; performance not guaranteed with other GPUs
)
)
Video
Video 1,024 × 768 pixels or more with 24-bit color or better
Other
Other
• Built-in USB port recommended. Operation is not guaranteed with other
USB ports.
.NET Framework 3.5 Service Pack 1 required when uploading images or us-
ing Map Viewer.
Internet connection (broadband recommended) required to install
.NETFramework (if necessary), to use auto update feature, and when per-
forming such tasks as sharing pictures on-line or via e-mail.
1 Other versions of Windows are not supported. Only pre-installed operating systems are
supported; operation is not guaranteed on home-built computers or computers that have
been upgraded from earlier versions of Windows.
2 Recommended when displaying HD movies.
83Connections
Viewing Pictures on a Computer
2
Start the computer. Log in to an account with administrator privileges be-
fore proceeding.
3
Exit any applications that may be running and insert the installer CD in a
CD-ROM drive.
Windows 7/Windows Vista
Windows 7/Windows Vista
If an AutoPlay dialog is displayed, click SETUP.EXE. A “User Account Control” dia-
log will then be displayed; click Yes (Windows 7) or Allow (Windows Vista).
The installer will start automatically; click Install MyFinePix Studio and
follow the on-screen instructions to install MyFinePix Studio and RAW FILE
CONVERTER (F770EXR only).
If the Installer Does Not Start Automatically
If the Installer Does Not Start Automatically
If the installer does not start automatically, select Computer or My Computer
from the Start menu, then double-click the FINEPIX CD icon to open the FINEPIX
CD window and double-click setup or SETUP.EXE.
84 Connections
Viewing Pictures on a Computer
4
If prompted to install Windows Media Player or DirectX, follow the on-
screen instructions to complete installation.
5
Remove the installer CD from the CD-ROM drive when installation is com-
plete. Store the installer CD in a dry location out of direct sunlight in case
you need to re-install the software.
Installation is now complete. Proceed to “Connecting the Camera (P 87).
85Connections
Viewing Pictures on a Computer
Macintosh: Installing FinePixViewer
Macintosh: Installing FinePixViewer
1
Con rm that the computer meets the following system requirements:
CPU
CPU PowerPC or Intel (Core 2 Duo or better)
*
OS
OS
Pre-installed copies of Mac OS X version 10.3.9–10.6 (visit http://www.fujifilm.
com/support/digital_cameras/compatibility/ for more information). Mac OS X
version 10.7 and later not supported.
RAM
RAM 256 MB or more (1 GB or more)
*
Free disk space
Free disk space
A minimum of 200 MB required for installation with 400 MB available when
FinePixViewer is running
Video
Video 800 × 600 pixels or more with thousands of colors or better
Other
Other
Built-in USB port recommended. Operation is not guaranteed with other USB
ports.
* Recommended when displaying HD movies.
2
After starting the computer and quitting any applications that may be run-
ning, insert the installer CD in a CD-ROM drive and double-click Installer
for Mac OS X.
R To install RAW FILE CONVERTER, double-click SILKYRFCEXInstaller. RAW FILE
CONVERTER is used to view RAW images on your computer (F770EXR only).
3
An installer dialog will be displayed; click Installing FinePixViewer to start
installation. Enter an administrator name and password when prompted
and click OK, then follow the on-screen instructions to install FinePixViewer.
Click Exit to quit the installer when installation is complete.
86 Connections
Viewing Pictures on a Computer
4
Remove the installer CD from the CD-ROM drive. Note that you may be
unable to remove the CD if Safari is running; if necessary, quit Safari before
removing the CD. Store the installer CD in a dry location out of direct sun-
light in case you need to re-install the software.
5
Mac OS X 10.5 or earlier: Open the Applications folder, start Image Capture,
and select Preferences… from the Image Capture application menu. The
Image Capture preferences dialog will be displayed; choose Other in
the When a camera is connected, open menu, then select FPVBridge
in the Applications/FinePixViewer” folder and click Open. Quit Image Cap-
ture.
Mac OS X 10.6: Connect the camera and turn it on. Open the Applications”
folder and start Image Capture. The camera will be listed under DEVICES;
select the camera and choose FPVBridge from the Connecting this cam-
era opens menu and click Choose. Quit Image Capture.
Installation is now complete. Proceed to “Connecting the Camera (P 87).
87Connections
Viewing Pictures on a Computer
Connecting the Camera
Connecting the Camera
1
If the pictures you wish to copy are stored on a memory card, insert the
card into the camera.
R Windows users may require the Windows CD when starting the software for
the  rst time.
Q Loss of power during transfer could result in loss of data or damage to internal
memory or the memory card. Charge the battery before connecting the camera.
2
Turn the camera o and connect the supplied USB cable as shown, mak-
ing sure the connectors are fully inserted. Connect the camera directly to
the computer; do not use a USB hub or keyboard.
3
Press the a button for about a second to turn the camera on and follow
the on-screen instructions to copy pictures to the computer. To exit with-
out copying pictures, click Cancel.
88 Connections
Viewing Pictures on a Computer
For more information on using the supplied software, start the application
and select the appropriate option from the Help menu.
Q If a memory card containing a large number of images is inserted, there may be a
delay before the software starts and you may be unable to import or save images.
Use a memory card reader to transfer pictures.
Q Make sure that the computer does not display a message stating that copying is in
progress and that the indicator lamp is out before turning the camera o or discon-
necting the USB cable (if the number of images copied is very large, the indicator
lamp may remain lit after the message has cleared from the computer display).
Failure to observe this precaution could result in loss of data or damage to internal
memory or the memory card.
Q Disconnect the camera before inserting or removing memory cards.
Q In some cases, it may not be possible to access pictures saved to a network server
using the supplied software in the same way as on a standalone computer.
Q The user bears all applicable fees charged by the phone company or Internet ser-
vice provider when using services that require an Internet connection.
89Connections
Viewing Pictures on a Computer
Disconnecting the Camera
Disconnecting the Camera
After con rming that the indicator lamp is out, turn the camera o and disconnect
the USB cable.
Uninstalling the Supplied Software
Uninstalling the Supplied Software
Only uninstall the supplied software when it is no longer required or before begin-
ning reinstallation. After quitting the software and disconnecting the camera, drag
the “FinePixViewer folder from Applications” into the Trash and select Empty Trash
in the Finder menu (Macintosh), or open the control panel and use “Programs and
Features (Windows7/Windows Vista) or Add or Remove Programs (WindowsXP) to
uninstall MyFinePix Studio. Under Windows, one or more con rmation dialogs may
be displayed; read the contents carefully before clicking OK.
90
Menus
Menus
Using the Menus: Shooting Mode
Using the Menus: Shooting Mode
Use the F-mode and shooting menus to adjust shooting settings. The op-
tions available vary with the shooting mode selected.
Using the
Using the
F
F
-Mode Menu
-Mode Menu
To display F-mode menu shooting options, press the
F button in shooting mode. Highlight items and press
the selector right to view options, then highlight an op-
tion and press MENU/OK. Press DISP/BACK to exit when set-
tings are complete.
F
F
-Mode Menu Options
-Mode Menu Options
N
N
ISO
ISO
(
(
defaults to
defaults to
AUTO)
AUTO)
Control the cameras sensitivity to light. Higher values can reduce blur; note, however, that mot-
tling may appear in pictures taken at high sensitivities.
100
100
ISO
ISO
12800
12800
Bright
Bright
Scene
Scene
Dark
Dark
Less noticeable
Less noticeable
Noise (mottling)
Noise (mottling)
More noticeable
More noticeable
Option
Option
Description
Description
AUTO
AUTO
Sensitivity is adjusted automatically in response to shooting conditions.
AUTO (3200) / AUTO(1600) /
AUTO (3200) / AUTO(1600) /
AUTO(800) / AUTO(400)
AUTO(800) / AUTO(400)
As above, except that sensitivity will not be raised above the value in
parentheses.
12800 / 6400 / 3200 / 1600 /
12800 / 6400 / 3200 / 1600 /
800 / 400 / 200 / 100
800 / 400 / 200 / 100
Sensitivity is set to the speci ed value, which is shown in the display.
91Menus
Using the Menus: Shooting Mode
O
O
IMAGE SIZE
IMAGE SIZE
(
(
defaults to
defaults to
O
O
4:3)
4:3)
Choose the image size and aspect ratio at which pictures are record-
ed. Large pictures can be printed at large sizes with no drop in quality,
while small pictures require less memory, allowing more pictures to be
recorded.
O
O
4 : 3
4 : 3
Size Aspect ratio
Size Versus Aspect Ratio
Size Versus Aspect Ratio
Size
Size
Option
Option
Prints at sizes up to
Prints at sizes up to
O
O
34 × 25 cm (13.5 × 10 in.)
P
P
24 × 18 cm (9.5 × 7 in.)
Q
Q
17 × 13 cm (7 × 5 in.)
Aspect ratio
Aspect ratio
4 : 3: Pictures have the same
proportions as the camera
display.
3 : 2: Pictures have the same
proportions as a frame of
35 mm  lm.
16 : 9: Suited for display on
High De nition (HD) devices.
3
3
4
4
2
2
3
3
9
9
16
16
92 Menus
Using the Menus: Shooting Mode
R
R
CONTINUOUS
CONTINUOUS
(
(
defaults to
defaults to
OFF)
OFF)
Capture motion in a series of pictures (
Capture motion in a series of pictures (
P
P
46). Choose from
46). Choose from
O
O
,
,
X
X
,
,
Y
Y
,
,
I
I
,
,
P
P
, and
, and
OFF
OFF
(F770EXR)
(F770EXR)
or
or
O
O
,
,
X
X
,
,
Y
Y
,
,
L
L
,
,
I
I
, and
, and
OFF
OFF
(F750EXR).
(F750EXR).
R
R
LANDMARK NAVIGATOR (F770EXR Only)
LANDMARK NAVIGATOR (F770EXR Only)
View landmark information
(
(
P
P
71)
71).
R
R
SET-UP (F770EXR Only)
SET-UP (F770EXR Only)
Access the following GPS options (P 65).
Option
Option
Description
Description
POWER SEARCH ON
POWER SEARCH ON
Immediately update GPS data.
R GPS data are not updated if OFF for LOCATION SEARCH.
MY LANDMARK REGISTER
MY LANDMARK REGISTER
Add custom landmarks, names, or photos to the map database, or edit or
delete custom landmarks.
LOCATION SEARCH
LOCATION SEARCH Turn the GPS receiver on or o .
LOCATION INFO
LOCATION INFO Display GPS data.
AUTO TIME CORRECTION
AUTO TIME CORRECTION Use GPS data to set the camera clock.
TRACKING DATA
TRACKING DATA Record GPS data.
km/mile
km/mile Choose the units used to display GPS information.
PLACE NAME STAMP
PLACE NAME STAMP
Choose ON to embed GPS data in photos (GPS data will not be embed-
ded in movies, panoramas, or 3D photos). Note that GPS data can not be
deleted; select OFF before shooting if you do not wish to record GPS data
with your pictures.
93Menus
Using the Menus: Shooting Mode
Z
Z
ADVANCED ANTI BLUR
ADVANCED ANTI BLUR
(
(
defaults to
defaults to
ON)
ON)
Select ON to enable advanced anti blur in R mode (P 24).
P
P
FILM SIMULATION
FILM SIMULATION
(
(
defaults to
defaults to
c
c
)
)
Simulate the e ects of di erent types of  lm, including sepia and black-and-white.
Option
Option
Description
Description
c
c
PROVIA/STANDARD
PROVIA/STANDARD
Standard color reproduction. Suited to a wide range of subjects, from
portraits to landscapes.
d
d
Velvia/VIVID
Velvia/VIVID
A high-contrast palette of saturated colors, suited to nature photographs.
e
e
ASTIA/SOFT
ASTIA/SOFT
A soft-toned palette of less saturated colors.
b
b
B&W
B&W
Take pictures in black and white.
f
f
SEPIA
SEPIA
Take pictures in sepia.
94 Menus
Using the Menus: Shooting Mode
Using the Shooting Menu
Using the Shooting Menu
To display the shooting menu, press MENU/OK in shooting
mode. Highlight items and press the selector right to
view options, then highlight an option and press MENU/
OK. Press DISP/BACK to exit when settings are complete.
Shooting Menu Options
Shooting Menu Options
A
A
E
E
MODE
MODE
(
(
defaults to
defaults to
R
R
)
)
Choose an option for E mode (P 23).
A
A
Adv. MODE
Adv. MODE
(
(
defaults to
defaults to
r
r
)
)
Choose an advanced shooting mode (P 25).
A
A
SCENE POSITION
SCENE POSITION
(
(
defaults to
defaults to
h
h
)
)
Choose a scene for SP mode (P 33).
N
N
ISO
ISO
(
(
defaults to
defaults to
AUTO)
AUTO)
Control the cameras sensitivity to light (P 90).
O
O
IMAGE SIZE
IMAGE SIZE
(
(
defaults to
defaults to
O
O
4:3)
4:3)
Choose image size and aspect ratio (P 91).
T
T
IMAGE QUALITY
IMAGE QUALITY
(
(
defaults to
defaults to
F)
F)
Choose how much image  les are compressed.
Option
Option
Description
Description
FINE
FINE Low compression. Select for higher image quality.
NORMAL
NORMAL High compression. Select this option to store more pictures.
95Menus
Using the Menus: Shooting Mode
U
U
DYNAMIC RANGE
DYNAMIC RANGE
(
(
defaults to
defaults to
AUTO)
AUTO)
Control contrast. Higher values are recommended for scenes that include both sunlight and
deep shade or for increased contrast with such subjects as sunlight on water, brightly-lit autumn
leaves, portraits taken against a blue sky, and white objects or people wearing white; note, how-
ever, that mottling may appear in pictures taken at higher values. If AUTO is selected, the camera
will automatically select values between 100% and 400% in response to shooting conditions.
Option
Option
Description
Description
AUTO
AUTO
V
V
100%
100%
Increase contrast when shooting indoors or under overcast skies.
W
W
200%
200%
X
X
400%
400%
Y
Y
800%
800%
Reduce loss of detail in highlights and shadows when photographing
high-contrast scenes.
Z
Z
1600%
1600%
R Z 1600% and Y 800% are available only when D-RANGE PRIORITY is selected in E
mode and an option other than d Velvia/VIVID or e ASTIA/SOFT is selected for P FILM
SIMULATION.
P
P
FILM SIMULATION
FILM SIMULATION
(
(
defaults to
defaults to
c
c
)
)
Simulate the e ects of di erent types of  lm (P 93).
96 Menus
Using the Menus: Shooting Mode
D
D
WHITE BALANCE
WHITE BALANCE
(
(
defaults to
defaults to
AUTO)
AUTO)
If AUTO does not produce natural colors (for example, when taking close-ups), select h and
measure a value for white balance or choose the option that matches the light source.
Option
Option
Description
Description
AUTO
AUTO White balance adjusted automatically.
h
h
Measure a value for white balance.
i
i
For subjects in direct sunlight.
j
j
For subjects in the shade.
k
k
Use under daylight” uorescent lights.
l
l
Use under “warm white uorescent lights.
m
m
Use under cool white uorescent lights.
n
n
Use under incandescent lighting.
g
g
For underwater photography
h
h
: Custom White Balance
: Custom White Balance
Choose h to adjust white balance for unusual lighting conditions. White balance measure-
ment options will be displayed; frame a white object so that it  lls the display and press the
shutter button all the way down to measure white balance.
If “COMPLETED! is displayed, press MENU/OK to set white balance to the measured value.
If “UNDER” is displayed, raise exposure compensation (P 39) and try again.
If “OVER” is displayed, lower exposure compensation and try again.
R For greater precision, adjust P FILM SIMULATION, N ISO, and U DYNAMIC RANGE
before measuring white balance.
R At settings other than
h, auto white balance is used with the  ash.
R Results vary with shooting conditions. Play pictures back after shooting to check colors in
the display.
97Menus
Using the Menus: Shooting Mode
y
y
INTELLIGENT SHARPNESS
INTELLIGENT SHARPNESS
(
(
defaults to
defaults to
OFF)
OFF)
Select ON to process photos digitally for sharp, super high-resolution results.
R The time needed to record images increases.
R The e ects are not visible in the display during shooting.
R Intelligent sharpness may turn o automatically in some modes.
R This option has no e ect on photos taken in continuous mode.
R
R
CONTINUOUS
CONTINUOUS
(
(
defaults to
defaults to
OFF)
OFF)
Capture motion in a series of pictures (
Capture motion in a series of pictures (
P
P
46). Choose from
46). Choose from
O
O
,
,
X
X
,
,
Y
Y
,
,
I
I
,
,
P
P
, and
, and
OFF
OFF
(F770EXR)
(F770EXR)
or
or
O
O
,
,
X
X
,
,
Y
Y
,
,
L
L
,
,
I
I
, and
, and
OFF
OFF
(F750EXR).
(F750EXR).
R
R
MY LANDMARK REGISTER (F770EXR Only)
MY LANDMARK REGISTER (F770EXR Only)
Add custom landmarks, names, or photos to the map database, or edit or delete custom land-
marks
(
(
P
P
71)
71).
Z
Z
ADVANCED ANTI BLUR
ADVANCED ANTI BLUR
(
(
defaults to
defaults to
ON)
ON)
Select ON to enable advanced anti blur in R mode (P 24).
b
b
FACE DETECTION
FACE DETECTION
Choose whether the camera automatically detects and sets focus and exposure for human por-
trait subjects (P 45).
98 Menus
Using the Menus: Shooting Mode
C
C
PHOTOMETRY
PHOTOMETRY
(
(
defaults to
defaults to
o
o
)
)
Choose how the camera meters exposure when Intelligent Face Detection is o .
Option
Option
Description
Description
o MULTI
Automatic scene recognition is used to adjust exposure for a wide range of
shooting conditions.
p SPOT
The camera meters lighting conditions at the center of the frame. Recom-
mended when the background is much brighter or darker than the main
subject.
q AVERAGE
Exposure is set to the average for the entire frame. Provides consistent expo-
sure across multiple shots with the same lighting, and is particularly e ective
for landscapes and portraits of subjects dressed in black or white.
99Menus
Using the Menus: Shooting Mode
F
F
AF MODE
AF MODE
This option controls how the camera selects the focus area for photographs. Regardless of the
option selected, the camera will focus on the subject in the center of the frame when macro
mode is on.
Option
Option
Description
Description
r CENTER
The camera focuses on the subject in the center of the frame.
s MULTI
When the shutter button is pressed halfway, the camera detects high-contrast
subjects near the center of the frame and selects the focus area automatically.
u CONTINUOUS
The camera continuously adjusts focus to re ect changes in the distance to
the subject in the focus frame.
x TRACKING
Position the subject in the center focus area and press the selector left. Focus
will track the subject as it moves through the frame.
R Note that in u and x modes, the camera focuses continuously, increasing the drain on the
battery, and that the sound of the camera focusing may be audible.
R If a face is detected when u is selected, a o icon will be displayed and the camera will
continuously adjust focus to maintain focus on the face.
n
n
FACE RECOGNITION
FACE RECOGNITION
Add portrait subjects to the face recognition database. These subjects will be given priority
during Intelligent Face Detection, and their names and other information can be viewed during
playback (P 54).
100 Menus
Using the Menus: Shooting Mode
F
F
MOVIE AF MODE
MOVIE AF MODE
(
(
defaults to
defaults to
r
r
)
)
This option controls how the camera selects the focus area for movies.
Option
Option
Description
Description
r CENTER
The camera focuses on the subject in the center of the frame.
u CONTINUOUS
The camera continuously adjusts focus to re ect changes in the distance to
subjects near the center of the frame.
R Note that in u mode, the camera focuses continuously, increasing the drain on the battery,
and that the sound of the camera focusing may be audible.
W
W
MOVIE MODE
MOVIE MODE
(
(
defaults to
defaults to
i
i
)
)
Choose a frame size for movies (P 73).
a
a
STILL SHOOTING IN MOVIE
STILL SHOOTING IN MOVIE
(
(
defaults to
defaults to
MOVIE PRIORITY)
MOVIE PRIORITY)
Choose how the camera records photographs taken during movie recording(P 74).
Option
Option
Description
Description
MOVIE PRIORITY
The camera takes a photograph without interrupting movie recording.
Image size is determined by the option selected for W MOVIE MODE.
STILL IMAGE PRIORITY
The camera interrupts  lming to take the photograph and resumes  lm-
ing automatically when recording is complete. Image size is determined
by the option selected for O IMAGE SIZE, but note that the photograph
will be recorded at size P if O is selected.
J
J
AE BKT EV STEPS
AE BKT EV STEPS
(
(
defaults to
defaults to
±
±
/
/
)
)
Choose the size of the exposure bracketing increment used when O AE BKT is selected for
R CONTINUOUS. Select from increments of +
/
 EV, +
/
EV, and +1 EV (note that the camera
may not be able to use the selected bracketing increment if the amount of over- or under- expo-
sure exceeds the limits of the exposure metering system).
101Menus
Using the Menus: Playback Mode
Using the Menus: Playback Mode
The F-mode and playback menus are used to manage the pictures in inter-
nal memory or on the memory card.
Using the
Using the
F
F
-Mode Menu
-Mode Menu
To display F-mode menu playback options, press the
F button in playback mode. Highlight items and press
the selector right to view options, then highlight an op-
tion and press MENU/OK. Press DISP/BACK to exit when set-
tings are complete.
F
F
-Mode Menu Options
-Mode Menu Options
m
m
PHOTOBOOK ASSIST
PHOTOBOOK ASSIST
Create books from your favorite photos (P 60).
R
R
LANDMARK NAVIGATOR (F770EXR Only)
LANDMARK NAVIGATOR (F770EXR Only)
View landmark information
(
(
P
P
71)
71).
R
R
PHOTO NAVIGATION (F770EXR Only)
PHOTO NAVIGATION (F770EXR Only)
View the direction and distance from your present position to the location where a picture was
taken
(
(
P
P
69)
69).
102 Menus
Using the Menus: Playback Mode
R
R
SET-UP (F770EXR Only)
SET-UP (F770EXR Only)
Access the following GPS options
Access the following GPS options (P 65)
.
.
Option
Option
Description
Description
POWER SEARCH ON
POWER SEARCH ON
Immediately update GPS data.
R GPS data are not updated if OFF for LOCATION SEARCH.
LOCATION INFO COPY
LOCATION INFO COPY Copy GPS data from one picture to another.
LOCATION SEARCH
LOCATION SEARCH Turn the GPS receiver on or o .
LOCATION INFO
LOCATION INFO Display GPS data.
AUTO TIME CORRECTION
AUTO TIME CORRECTION Use GPS data to set the camera clock.
TRACKING DATA
TRACKING DATA Record GPS data.
km/mile
km/mile Choose the units used to display GPS information.
PLACE NAME STAMP
PLACE NAME STAMP
Choose ON to embed GPS data in photos (GPS data will not be embed-
ded in movies, panoramas, or 3D photos). Note that GPS data can not be
deleted; select OFF before shooting if you do not wish to record GPS data
with your pictures.
I
I
SLIDE SHOW
SLIDE SHOW
(
(
defaults to
defaults to
MULTIPLE)
MULTIPLE)
View pictures in an automated slide show. Choose the type of show and press MENU/OK to start.
Press DISP/BACK at any time during the show to view on-screen help. The show can be ended at
any time by pressing MENU/OK.
Option
Option
Description
Description
NORMAL
Press selector left or right to go back or skip ahead one frame. Select
FADE-IN for fade transitions between frames.
FADE-IN
NORMAL g
As above, except that camera automatically zooms in on faces selected
with Intelligent Face detection.
FADE-IN g
MULTIPLE Display several pictures at once.
R The camera will not turn o automatically while a slide show is in progress.
103Menus
Using the Menus: Playback Mode
Using the Playback Menu
Using the Playback Menu
To display the playback menu, press MENU/OK in playback
mode. Highlight items and press the selector right to
view options, then highlight an option and press MENU/
OK. Press DISP/BACK to exit when settings are complete.
Playback Menu Options
Playback Menu Options
m
m
PHOTOBOOK ASSIST
PHOTOBOOK ASSIST
Create books from your favorite photos (P 60).
R
R
LANDMARK NAVIGATOR (F770EXR Only)
LANDMARK NAVIGATOR (F770EXR Only)
View landmark information
(
(
P
P
71)
71).
R
R
LOCATION INFO COPY (F770EXR Only)
LOCATION INFO COPY (F770EXR Only)
Copy GPS data from one picture to another
(
(
P
P
70)
70).
R
R
PHOTO NAVIGATION (F770EXR Only)
PHOTO NAVIGATION (F770EXR Only)
View the direction and distance from your present position to the location where a picture was
taken (P
69
69).
b
b
IMAGE SEARCH
IMAGE SEARCH
Search for pictures (P 59).
A
A
ERASE
ERASE
Delete all or selected pictures (P 58).
104 Menus
Using the Menus: Playback Mode
j
j
MARK FOR UPLOAD TO
MARK FOR UPLOAD TO
Select pictures for upload to YouTube or Facebook using MyFinePix Studio (Windows only).
Selecting Pictures for Upload
1
Select YouTube to choose movies for upload to YouTube, FACEBOOK to choose photos and
movies for upload to Facebook.
2
Press the selector left or right to display pictures and press MENU/OK to select or deselect. Press
DISP/BACK to exit when all the desired pictures are selected.
R Only movies can be selected for upload to YouTube.
R During playback, selected pictures are indicated by j YouTube or j FACEBOOK icons.
RESET ALL: Deselecting All Pictures
Choose RESET ALL to deselect all pictures. If the number of pictures a ected is very large, a
message will be displayed while the operation is in progress. Press DISP/BACK to exit before the
operation is complete.
Uploading Pictures (Windows Only)
Selected pictures can be uploaded using the YouTube/Facebook Upload option in MyFinePix
Studio.
Select with camera
Upload from computer
For information on installing MyFinePix Studio and connecting the camera to a computer, see
Viewing Pictures on a Computer” (P 82).
105Menus
Using the Menus: Playback Mode
I
I
SLIDE SHOW
SLIDE SHOW
(
(
defaults to
defaults to
MULTIPLE)
MULTIPLE)
View pictures in an automated slide show (P 102).
B
B
RED EYE REMOVAL
RED EYE REMOVAL
If the current picture is marked with a g icon to indicate that it was taken with Intelligent Face
Detection, this option can be used to remove red-eye. The camera will analyze the image; if red-
eye is detected, the image will be processed to create a copy with reduced red-eye.
1
Display the desired picture.
2
Select B RED EYE REMOVAL in the playback menu.
3
Press MENU/OK.
R Red eye may not be removed if the camera is unable to detect a face or the face is in pro le.
Results may di er depending on the scene. Red eye can not be removed from pictures that
have already been processed using red-eye removal or pictures created with other devices.
R The amount of time needed to process the image varies with the number of faces detected.
R Copies created with B RED EYE REMOVAL are indicated by a e icon during playback.
D
D
PROTECT
PROTECT
Protect pictures from accidental deletion.
1
Select D PROTECT in the playback menu.
2
Highlight one of the following options and press MENU/OK:
FRAME: Protect selected pictures. Press the selector left or right to view pictures and press
MENU/OK to select or deselect. Press DISP/BACK when the operation is complete.
SET ALL: Protect all pictures.
RESET ALL: Remove protection from all pictures.
Q Protected pictures will be deleted when the memory card or internal memory is formatted
(P 112).
106 Menus
Using the Menus: Playback Mode
G
G
CROP
CROP
Create a cropped copy of the current picture.
1
Display the desired picture.
2
Select G CROP in the playback menu.
3
Use the zoom control to zoom in and out and use the selector to scroll the picture until the
desired portion is displayed.
4
Press MENU/OK to display a con rmation dialog.
5
Press MENU/OK again to save the cropped copy to a separate  le.
R Larger crops produce larger copies; all copies have an aspect ratio of 4 : 3. If the size of the  nal
copy will be a, OK will be displayed in yellow.
O
O
RESIZE
RESIZE
Create a small copy of the current picture.
1
Display the desired picture.
2
Select O RESIZE in the playback menu.
3
Highlight a size and press MENU/OK to display a con rmation dialog.
4
Press MENU/OK to save the resized copy to a separate  le.
R The sizes available vary with the size of the original image.
107Menus
Using the Menus: Playback Mode
C
C
IMAGE ROTATE
IMAGE ROTATE
Rotate pictures taken in tall orientation so that they are displayed in tall orientation in the LCD
monitor.
1
Display the desired picture.
2
Select C IMAGE ROTATE in the playback menu.
3
Press the selector down to rotate the picture 90 ° clockwise, up to rotate it 90 ° counterclock-
wise.
4
Press MENU/OK. The picture automatically be displayed in the selected orientation whenever it
is played back on the camera.
R Protected pictures can not be rotated. Remove protection before rotating pictures (P 105).
R The camera may not be able to rotate pictures created with other devices.
E
E
COPY
COPY
Copy pictures from internal memory to a memory card.
1
Select E COPY in the playback menu.
2
Highlight one of the following options and press the selector right:
a INTERNAL MEMORY y b CARD: Copy pictures from internal memory to a memory card.
b CARD y a INTERNAL MEMORY: Copy pictures from a memory card to internal memory.
3
Highlight one of the following options and press MENU/OK:
FRAME: Copy selected pictures. Press the selector left or right to view pictures and press
MENU/OK to copy the current picture.
ALL FRAMES: Copy all pictures.
R Copying ends when the destination is full.
R DPOF print information is not copied (P 80).
108 Menus
Using the Menus: Playback Mode
F
F
VOICE MEMO
VOICE MEMO
Add a voice memo to the current photograph. Holding the camera at a distance of about 20 cm,
face the microphone and press MENU/OK to begin recording. Press MENU/OK again to end record-
ing (recording ends automatically after 30 seconds).
R Voice memos can not be added to movies or protected pictures. Remove protection from
pictures before recording voice memos.
R If a voice memo already exists for the current picture, the options will be displayed. Select
RE-REC to replace the existing memo.
Playing Voice Memos
Playing Voice Memos
Pictures with voice memos are indicated by a q icon during playback. To play the voice
memo back, select PLAY for FVOICE MEMO in the playback menu.
R The camera may not play voice memos recorded with other devices.
R Do not cover the speaker during playback.
i
i
ERASE FACE RECOG.
ERASE FACE RECOG.
Remove face recognition links from the current image. When this option is selected, the cam-
era will zoom in on an area in the current picture that it has matched with a face in the face
recognition database. If the match is not correct, press MENU/OK to remove the link to the face
recognition database.
R Face recognition links can not be removed from copies with a size of a or smaller.
K
K
PRINT ORDER (DPOF)
PRINT ORDER (DPOF)
Select pictures for printing on DPOF- and PictBridge-compatible devices (P 80).
109Menus
Using the Menus: Playback Mode
J
J
DISP ASPECT
DISP ASPECT
Choose how High De nition (HD) devices display pictures with an aspect ratio of 4 : 3 (this option
is available only when an HDMI cable is connected). Select 16 : 9 to display the image so that it
lls the screen with its top and bottom cropped out, 4 : 3 to display the entire image with black
bands at either side.
4 : 3
4 : 3
16 : 9
16 : 9
16 : 9
16 : 9
4 : 3
4 : 3
R Photographs with an aspect ratio of 16 : 9 are displayed full screen, those with an aspect ratio
of 3 : 2 in a black frame.
110 Menus
The Setup Menu
The Setup Menu
Using the Setup Menu
Using the Setup Menu
1
Display the setup menu.
1.1 Press MENU/OK to display the menu for the current
mode.
1.2 Press the selector left to highlight the tab for the
current menu.
1.3 Press the selector down to highlight X.
SET-UP
EXIT
Tab
1.4 Press the selector right to place the cursor in the setup menu.
2
Adjust settings.
Highlight items and press the selector right to view options, then high-
light an option and press MENU/OK. Press DISP/BACK to exit when settings
are complete.
111Menus
The Setup Menu
Setup Menu Options
Setup Menu Options
F
F
DATE/TIME
DATE/TIME
Set the camera clock (P 16).
N
N
TIME DIFFERENCE
TIME DIFFERENCE
(
(
defaults to
defaults to
h
h
)
)
Switch the camera clock instantly from your home time zone to the local time at your destina-
tion when traveling. To specify the di erence between local time and your home time zone:
1
Highlight g LOCAL and press the selector right.
2
Use the selector to choose the time di erence between local time and your home time zone.
3
Press MENU/OK.
To switch between local time and your home time zone, highlight g LOCAL or h HOME and
press MENU/OK.
Option
Option
Description
Description
h
h
HOME
HOME Switch to the time currently selected for F DATE/TIME (see above).
g
g
LOCAL
LOCAL
Switch to local time. If this option is selected, g and the time and date will
be displayed in yellow for three seconds each time the camera is turned on.
Q
Q
a
a
Choose a language.
o
o
SILENT MODE
SILENT MODE
(
(
defaults to
defaults to
OFF)
OFF)
Select ON to disable the speaker,  ash, and AF-assist illuminator in situations in which camera
sounds or lights may be unwelcome (note that the  ash will still  re in C mode).
112 Menus
The Setup Menu
R
R
RESET
RESET
Reset all settings except F DATE/TIME, N TIME DIFFERENCE, O BACKGROUND COLOR,
and Q VIDEO SYSTEM to default values.
1
Highlight R RESET and press the selector right to display a con rmation dialog.
2
Highlight OK and press MENU/OK.
K
K
FORMAT
FORMAT
If a memory card is inserted in the camera, this option will format the memory card. If no mem-
ory card is inserted, this option will format internal memory.
Q All data—including protected pictures—will be deleted from the memory card or internal
memory. Be sure important  les have been copied to a computer or other storage device.
Q Do not open the battery-chamber cover during formatting.
R
R
SET-UP (F770EXR Only)
SET-UP (F770EXR Only)
Access the following GPS options
Access the following GPS options (P 65)
.
.
Option
Option
Description
Description
POWER SEARCH ON
POWER SEARCH ON
Immediately update GPS data.
R GPS data are not updated if OFF for LOCATION SEARCH.
LOCATION SEARCH
LOCATION SEARCH Turn the GPS receiver on or o .
LOCATION INFO
LOCATION INFO Display GPS data.
AUTO TIME CORRECTION
AUTO TIME CORRECTION Use GPS data to set the camera clock.
TRACKING DATA
TRACKING DATA Record GPS data.
km/mile
km/mile Choose the units used to display GPS information.
PLACE NAME STAMP
PLACE NAME STAMP
Choose ON to embed GPS data in photos (GPS data will not be embed-
ded in movies, panoramas, or 3D photos). Note that GPS data can not be
deleted; select OFF before shooting if you do not wish to record GPS data
with your pictures.
113Menus
The Setup Menu
A
A
IMAGE DISP.
IMAGE DISP.
(
(
defaults to
defaults to
1.5 SEC)
1.5 SEC)
Choose how long pictures are displayed in the LCD monitor after shooting.
Option
Option
Description
Description
3 SEC
3 SEC
Pictures are displayed for three seconds (3SEC) or 1.5 seconds (1.5SEC).
Colors may di er slightly from those in the  nal image.
1.5 SEC
1.5 SEC
ZOOM (CONTINUOUS)
ZOOM (CONTINUOUS) Pictures are displayed until the MENU/OK button is pressed.
OFF
OFF Pictures are not displayed after shooting.
B
B
FRAME NO.
FRAME NO.
(
(
defaults to
defaults to
CONT.)
CONT.)
New pictures are stored in image  les named using a four-digit  le num-
ber assigned by adding one to the last  le number used. The  le num-
ber is displayed during playback as shown at right. B FRAME NO. con-
trols whether  le numbering is reset to 0001 when a new memory card
is inserted or the current memory card or internal memory is formatted.
Directory
number
File
number
Frame number
100-0001
100-0001
Option
Option
Description
Description
CONTINUOUS
CONTINUOUS
Numbering continues from the last  le number used or the  rst available  le
number, whichever is higher. Choose this option to reduce the number of
pictures with duplicate  le names.
RENEW
RENEW
Numbering is reset to 0001 after formatting or when a new memory card is
inserted.
R If the frame number reaches 999-9999, the shutter release will be disabled (P 133).
R Selecting R RESET (P 112) sets B FRAME NO. to CONTINUOUS but does not reset the  le
number.
R Frame numbers for pictures taken with other cameras may di er.
114 Menus
The Setup Menu
G
G
OPERATION VOL.
OPERATION VOL.
(
(
defaults to
defaults to
c
c
)
)
Adjust the volume of the sounds produced when camera controls are operated. Choose eOFF
(mute) to disable control sounds.
H
H
SHUTTER VOLUME
SHUTTER VOLUME
(
(
defaults to
defaults to
c
c
)
)
Adjust the volume of the sounds produced when the shutter is released. Choose eOFF (mute)
to disable the shutter sound.
e
e
SHUTTER SOUND
SHUTTER SOUND
(
(
defaults to
defaults to
i
i
)
)
Choose the sound made by the shutter.
I
I
PLAYBACK VOLUME
PLAYBACK VOLUME
(
(
defaults to
defaults to
7)
7)
Adjust the volume for movie and voice memo playback.
J
J
LCD BRIGHTNESS
LCD BRIGHTNESS
(
(
defaults to
defaults to
0)
0)
Control the brightness of the display.
T
T
MONITOR SUNLIGHT MODE
MONITOR SUNLIGHT MODE
(
(
defaults to
defaults to
OFF)
OFF)
Select ON to make the display in the monitor easier to read in bright light (P 6).
N
N
AUTO POWER OFF
AUTO POWER OFF
(
(
defaults to
defaults to
2 MIN)
2 MIN)
Choose the length of time before the camera turns o automatically when no operations are
performed. Shorter times increase battery life; if OFF is selected, the camera must be turned
o manually. Note that in some situations the camera turns o automatically even when OFF
is selected.
F
F
Fn BUTTON
Fn BUTTON
(
(
defaults to
defaults to
R
R
LANDMARK NAVIGATOR (F770EXR) /
LANDMARK NAVIGATOR (F770EXR) /
N
N
ISO (F750EXR))
ISO (F750EXR))
Choose the role played by the Fn button (P 44).
115Menus
The Setup Menu
L
L
DUAL IS MODE
DUAL IS MODE
(
(
defaults to
defaults to
L
L
)
)
Choose from the following image stabilization options:
Option
Option
Description
Description
L
CONTINUOUS + MOTION
CONTINUOUS + MOTION
Image stabilization on. If + MOTION is selected, the camera will ad-
just shutter speed to reduce motion blur when a moving objects
are detected.
l
CONTINUOUS
CONTINUOUS
M
SHOOTING + MOTION
SHOOTING + MOTION
As above, except that image stabilization is performed only when
the shutter button is pressed halfway or the shutter is released.
m
SHOOTING ONLY
SHOOTING ONLY
OFF
OFF Image stabilization o . Choose this option when using a tripod.
R + MOTION has no e ect when sensitivity is set to a  xed value, and may also be unavailable
at some other combinations of settings. The e ect may vary with lighting conditions and the
speed at which the object is moving.
B
B
RED EYE REMOVAL
RED EYE REMOVAL
(
(
defaults to
defaults to
ON)
ON)
Choose ON to remove red-eye e ects caused by the  ash when shooting with Intelligent Face
Detection.
R Red-eye reduction is performed only when a face is detected.
R Red-eye removal is not available with RAW images.
116 Menus
The Setup Menu
R
R
INTELLIGENT DIGITAL ZOOM
INTELLIGENT DIGITAL ZOOM
(
(
defaults to
defaults to
OFF)
OFF)
If ON is selected, selecting i at the maximum optical zoom position triggers intelligent digital
zoom, further magnifying the image while processing it for sharp, high-resolution results.
The Zoom Indicator
The Zoom Indicator
INTELLIGENT DIGITAL
INTELLIGENT DIGITAL
ZOOM
ZOOM
on
on
ji
Optical zoom Intelligent
digital zoom
INTELLIGENT DIGITAL
INTELLIGENT DIGITAL
ZOOM
ZOOM
o
o
ji
Optical zoom
R Selecting another mode may end intelligent digital zoom and restore maximum optical
zoom.
R In R mode, the camera will match the E mode to the scene for zoom ratios of up to
40× when combined with optical zoom.
R Intelligent digital zoom may sometimes produce lower quality images than optical zoom.
R The time needed to record images increases.
R The e ects are not visible in the display during shooting.
R Intelligent digital zoom is not available in continuous mode or during movie recording.
117Menus
The Setup Menu
C
C
AF ILLUMINATOR
AF ILLUMINATOR
(
(
defaults to
defaults to
ON)
ON)
If ON is selected, the AF-assist illuminator will light to assist autofocus.
Q The camera may be unable to focus using the AF-assist illuminator in some cases. If the cam-
era is unable to focus in macro mode, try increasing the distance to the subject.
Q Avoid shining the AF-assist illuminator directly into your subject’s eyes.
j
j
RAW (F770EXR Only)
RAW (F770EXR Only)
(
(
defaults to
defaults to
OFF)
OFF)
Choose RAW+JPEG or RAW to record RAW pictures (note that because RAW data are not pro-
cessed on the camera, RAW pictures must be copied to a computer for processing). If RAW+JPEG
is selected, JPEG copies will also be recorded. Choose OFF to record pictures in JPEG format only.
R To convert RAW  les for display on a computer, use the supplied RAW File Converter software.
Q Crop, resize, and red-eye removal are not available with RAW images. The maximum zoom
available when viewing RAW images is 3.2 ×.
t
t
SAVE ORG IMAGE
SAVE ORG IMAGE
(
(
defaults to
defaults to
OFF)
OFF)
Choose ON to save unprocessed copies of seamless z panoramas or pictures taken using
B RED EYE REMOVAL, j PRO LOW-LIGHT MODE, or i PRO FOCUS MODE.
m
m
AUTOROTATE PB
AUTOROTATE PB
(
(
defaults to
defaults to
ON)
ON)
Choose ON to automatically rotate “tall” (portrait-orientation) pictures during playback.
O
O
BACKGROUND COLOR
BACKGROUND COLOR
Choose a color scheme.
c
c
GUIDANCE DISPLAY
GUIDANCE DISPLAY
(
(
defaults to
defaults to
ON)
ON)
Choose whether to display tool tips.
118 Menus
The Setup Menu
Q
Q
VIDEO SYSTEM
VIDEO SYSTEM
Choose a video mode for connection to a TV.
Option
Option
Description
Description
NTSC
NTSC
Select this mode for connection to video devices in North America, the Carib-
bean, parts of Latin America, and some East Asian countries.
PAL
PAL
Select this mode for connection to video devices in the United Kingdom and
much of Europe, Australia, New Zealand, and parts of Asia and Africa.
x
x
POWER MANAGEMENT
POWER MANAGEMENT
(
(
defaults to
defaults to
n
n
)
)
Optimize camera performance for increased battery life or display quality.
Option
Option
Description
Description
n
n
POWER SAVE
POWER SAVE
Reduces display refresh rate. The display dims to save power if no operations
are performed for a short period, but can be restored by operating camera
controls. Select this option to save power.
o
o
CLEAR DISPLAY
CLEAR DISPLAY
Choose this option for a brighter, higher quality display and for a longer delay
before the monitor dims to save power.
R n POWER SAVE does not take e ect when Intelligent Face Detection is on.
119Menus
The Setup Menu
U
U
DATE STAMP
DATE STAMP
(
(
defaults to
defaults to
OFF)
OFF)
Stamp the time and/or date of recording on photographs as they are taken.
Option
Option
Description
Description
R
R
+
+
S
S
Stamp new photographs with the date and time of recording.
R
R
Stamp new photographs with the date of recording.
OFF
OFF Do not stamp the time and date on new photographs.
Q Time and date stamps can not be deleted. Turn U DATE STAMP o to prevent time and date
stamps appearing on new photographs.
Q If the camera clock is not set, you will be prompted to set the clock to the current date and
time (P 16).
Q We recommend that you turn the DPOF “print date option o when printing images with a
time and date stamp (P 80).
Q Time and date stamps do not appear on movies, panoramas, or 3D photos.
W
W
START-UP SCREEN
START-UP SCREEN
(
(
defaults to
defaults to
OFF)
OFF)
Choose whether the camera displays a splash screen at startup.
R
R
DEMONSTRATION (F770EXR Only)
DEMONSTRATION (F770EXR Only)
(
(
defaults to
defaults to
OFF)
OFF)
Choose ON for a GPS demo. This option should normally be left OFF.
120
Technical Notes
Technical Notes
Optional Accessories
Optional Accessories
The camera supports a wide range of accessories from FUJIFILM and other
manufacturers.
USB cable (supplied)
SD card slot or card reader
Computer
*
Computer Related
Computer Related
Printing
Printing
Printer
*
PictBridge-compatible
printer
*
USB cable
(supplied)
SD/SDHC/SDXC
memory card
FINEPIX F770EXR
FINEPIX F750EXR
DIGITAL CAMERA
HDMI cable
(sold separately)
A/V cable (supplied)
TV
*
HDTV
*
Audio/Visual
Audio/Visual
HDMI cable
(sold separately)
Digital viewer
Digital viewer
Supports 3D display of
pictures taken using
INDIVD. SHUTTER 3D.
FINEPIX REAL 3D V3 (sold separately)
3D print
3D print
Photos taken in INDIVD. SHUTTER 3D.
http://fujifilm.com/3d/print/
* Available separately.
121Technical Notes
Optional Accessories
Accessories from FUJIFILM
Accessories from FUJIFILM
The following optional accessories are available from FUJIFILM. For the lat-
est information on the accessories available in your region, check with your
local FUJIFILM representative or visit http://www.fujifilm.com/products/digital_
cameras/index.html.
Rechargeable
Rechargeable
Li-ion batteries
Li-ion batteries
NP-50: Additional large-capacity NP-50 rechargeable bat-
teries can be purchased as required. The F750EXR can
be used with NP-50 batteries only; note that when used
with the F770EXR, the NP-50 may record fewer photos
per charge than the NP-50A.
Battery
Battery
chargers
chargers
BC-45W: Replacement battery chargers can be purchased
as required. The BC-45W charges an NP-50A/NP-50 bat-
tery in about 150 minutes at +20 °C (+68 °F).
AC power
AC power
adapters
adapters
AC-5VX (requires CP-50 DC coupler): Use for extended playback or
when copying pictures to a computer (shape of adapter
and plug vary with region of sale).
DC couplers
DC couplers CP-50: Connect the AC-5VX to the camera.
Digital viewer
Digital viewer
FINEPIX REAL 3D V3
FINEPIX REAL 3D V3: View 3D images without 3D glasses.
122 Technical Notes
Caring for the Camera
Caring for the Camera
To ensure continued enjoyment of the product, observe the following pre-
cautions.
Storage and Use
Storage and Use
If the camera will not be used for an
extended period, remove the battery
and memory card. Do not store or
use the camera in locations that are:
exposed to rain, steam, or smoke
very humid or extremely dusty
• exposed to direct sunlight or very
high temperatures, such as in a
closed vehicle on a sunny day
• extremely cold
subject to strong vibration
exposed to strong magnetic  elds,
such as near a broadcasting anten-
na, power line, radar emitter, motor,
transformer, or magnet
in contact with volatile chemicals
such as pesticides
next to rubber or vinyl products
Water and Sand
Exposure to water and sand can also
damage the camera and its internal
circuitry and mechanisms. When us-
ing the camera at the beach or sea-
side, avoid exposing the camera to
water or sand. Do not place the cam-
era on a wet surface.
Condensation
Sudden increases in temperature,
such as occur when entering a heated
building on a cold day, can cause con-
densation inside the camera. If this
occurs, turn the camera o and wait
an hour before turning it on again. If
condensation forms on the memory
card, remove the card and wait for the
condensation to dissipate.
123Technical Notes
Caring for the Camera
Cleaning
Cleaning
Use a blower to remove dust from the lens and LCD monitor, then gently wipe
with a soft, dry cloth. Any remaining stains can be removed by wiping gently
with a piece of FUJIFILM lens-cleaning paper to which a small amount of lens-
cleaning  uid has been applied. Care should be taken to avoid scratching the
lens or LCD monitor. The camera body can be cleaned with a soft, dry cloth.
Do not use alcohol, thinner, or other volatile chemicals.
Traveling
Traveling
Keep the camera in your carry-on baggage. Checked baggage may su er
violent shocks that could damage the camera.
124
Troubleshooting
Troubleshooting
Problems and Solutions
Problems and Solutions
Power and Battery
Problem
Problem
Solution
Solution
The camera does not
The camera does not
turn on.
turn on.
The battery is exhausted
The battery is exhausted
: Charge the battery or insert a fully-charged spare battery (
: Charge the battery or insert a fully-charged spare battery (
P
P
7).
7).
The battery is inserted incorrectly
The battery is inserted incorrectly
: Reinsert in the correct orientation (
: Reinsert in the correct orientation (
P
P
9).
9).
The battery-chamber cover is not latched
The battery-chamber cover is not latched
: Latch the battery-chamber cover (
: Latch the battery-chamber cover (
P
P
9).
9).
The AC power adapter and DC coupler are connected incorrectly
The AC power adapter and DC coupler are connected incorrectly
: Reconnect the AC power
: Reconnect the AC power
adapter and DC coupler.
adapter and DC coupler.
The battery runs down
The battery runs down
quickly.
quickly.
The battery is cold
The battery is cold
: Warm the battery by placing it in a pocket or other warm place and reinsert
: Warm the battery by placing it in a pocket or other warm place and reinsert
it in the camera immediately before taking a picture.
it in the camera immediately before taking a picture.
There is dirt on the battery terminals
There is dirt on the battery terminals
: Clean the terminals with a soft, dry cloth.
: Clean the terminals with a soft, dry cloth.
o
o
CLEAR DISPLAY
CLEAR DISPLAY
is selected for
is selected for
x
x
POWER MANAGEMENT
POWER MANAGEMENT
: Select
: Select
n
n
POWER
POWER
SAVE
SAVE
to reduce the drain on the battery (
to reduce the drain on the battery (
P
P
118).
118).
ON
ON
is selected for
is selected for
T
T
MONITOR SUNLIGHT MODE
MONITOR SUNLIGHT MODE
: Select
: Select
OFF
OFF
to reduce the
to reduce the
drain on the battery (
drain on the battery (
P
P
6).
6).
R
R
is selected for shooting mode
is selected for shooting mode
: Select
: Select
B
B
mode to reduce the drain on the battery (
mode to reduce the drain on the battery (
P
P
22).
22).
u
u
CONTINUOUS
CONTINUOUS
or
or
x
x
TRACKING
TRACKING
is selected for
is selected for
F
F
AF MODE
AF MODE
: Select a dif-
: Select a dif-
ferent AF mode (
ferent AF mode (
P
P
99).
99).
The battery has been charged many times
The battery has been charged many times
: The battery has reached the end of its charging
: The battery has reached the end of its charging
life. Purchase a new battery.
life. Purchase a new battery.
PERMANENTLY ON
PERMANENTLY ON
is selected for
is selected for
R
R
LOCATION SEARCH
LOCATION SEARCH
: Select
: Select
WHEN
WHEN
SWITCHED ON
SWITCHED ON
or
or
OFF
OFF
(
(
P
P
65, 92).
65, 92).
R
R
TRACKING DATA
TRACKING DATA
is on
is on
: Turn
: Turn
R
R
TRACKING DATA
TRACKING DATA
o (
o (
P
P
65, 92).
65, 92).
The camera turns o
The camera turns o
suddenly.
suddenly.
The battery is exhausted
The battery is exhausted
: Charge the battery or insert a fully-charged spare battery (
: Charge the battery or insert a fully-charged spare battery (
P
P
7).
7).
The AC power adapter or DC coupler has been disconnected
The AC power adapter or DC coupler has been disconnected
: Reconnect the AC power
: Reconnect the AC power
adapter and DC coupler.
adapter and DC coupler.
125Troubleshooting
Problems and Solutions
Problem
Problem
Solution
Solution
Charging does not start.
Charging does not start.
Reinsert the battery in the correct orientation and make sure that the charger is plugged in (
Reinsert the battery in the correct orientation and make sure that the charger is plugged in (
P
P
7).
7).
Charging is slow.
Charging is slow.
Charge the battery at room temperature (
Charge the battery at room temperature (
P
P
vi).
vi).
The charging lamp lights,
The charging lamp lights,
but the battery does not
but the battery does not
charge.
charge.
There is dirt on the battery terminals
There is dirt on the battery terminals
: Clean the terminals with a soft, dry cloth.
: Clean the terminals with a soft, dry cloth.
The battery has been charged many times
The battery has been charged many times
: The battery has reached the end of its charging
: The battery has reached the end of its charging
life. Purchase a new battery. If the battery still fails to charge, contact your FUJIFILM dealer.
life. Purchase a new battery. If the battery still fails to charge, contact your FUJIFILM dealer.
The battery is too hot or too cold
The battery is too hot or too cold
: Wait for the battery temperature to stabilize (
: Wait for the battery temperature to stabilize (
P
P
7).
7).
Menus and Displays
Problem
Problem
Solution
Solution
Menus and displays are
Menus and displays are
not in English.
not in English.
Select
Select
ENGLISH
ENGLISH
for
for
Q
Q
a
a
(
(
P
P
16, 111).
16, 111).
Shooting
Problem
Problem
Solution
Solution
No picture is taken when
No picture is taken when
the shutter button is
the shutter button is
pressed.
pressed.
Memory is full
Memory is full
: Insert a new memory card or delete pictures (
: Insert a new memory card or delete pictures (
P
P
10, 58).
10, 58).
Memory is not formatted
Memory is not formatted
: Format the memory card or internal memory (
: Format the memory card or internal memory (
P
P
112).
112).
There is dirt on the memory card contacts
There is dirt on the memory card contacts
: Clean the contacts with a soft, dry cloth.
: Clean the contacts with a soft, dry cloth.
The memory card is damaged
The memory card is damaged
: Insert a new memory card (
: Insert a new memory card (
P
P
10).
10).
The battery is exhausted
The battery is exhausted
: Charge the battery or insert a fully-charged spare battery (
: Charge the battery or insert a fully-charged spare battery (
P
P
7).
7).
The camera has turned o automatically
The camera has turned o automatically
: Turn the camera on (
: Turn the camera on (
P
P
14).
14).
The indicator lamp was orange when you attempted to record a panorama
The indicator lamp was orange when you attempted to record a panorama
: Wait until
: Wait until
the indicator lamps turns o (
the indicator lamps turns o (
P
P
3).
3).
The LCD monitor goes
The LCD monitor goes
dark after shooting.
dark after shooting.
The LCD monitor may darken while the  ash charges. Wait for the  ash to charge (
The LCD monitor may darken while the  ash charges. Wait for the  ash to charge (
P
P
41).
41).
3D images do not turn out
3D images do not turn out
as expected.
as expected.
Use a tripod or change the distance the camera is moved between the  rst and second shots (
Use a tripod or change the distance the camera is moved between the  rst and second shots (
P
P
31)
31)
126 Troubleshooting
Problems and Solutions
Problem
Problem
Solution
Solution
The camera does not
The camera does not
focus.
focus.
The subject is close to the camera
The subject is close to the camera
: Select macro mode (
: Select macro mode (
P
P
40).
40).
The subject is far away from the camera
The subject is far away from the camera
: Cancel macro mode (
: Cancel macro mode (
P
P
40).
40).
The subject is not suited to autofocus
The subject is not suited to autofocus
: Use focus lock (
: Use focus lock (
P
P
37).
37).
Pictures are not the
Pictures are not the
same size.
same size.
If
If
S
S
is selected for
is selected for
O
O
IMAGE SIZE
IMAGE SIZE
in
in
R
R
mode, the camera will optimize not only sensi-
mode, the camera will optimize not only sensi-
tivity and other settings, but also image size. To record all pictures at the same size, choose another
tivity and other settings, but also image size. To record all pictures at the same size, choose another
shooting mode or select another option for
shooting mode or select another option for
O
O
IMAGE SIZE
IMAGE SIZE
(
(
P
P
91).
91).
Macro mode is not
Macro mode is not
available.
available.
Choose a di erent shooting mode (
Choose a di erent shooting mode (
P
P
22).
22).
GPS
GPS
The camera is slow to acquire GPS data
The camera is slow to acquire GPS data
: Some time may be needed to acquire GPS data
: Some time may be needed to acquire GPS data
immediately after the camera or
immediately after the camera or
R
R
LOCATION SEARCH
LOCATION SEARCH
is turned on or if the camera has
is turned on or if the camera has
been unable to acquire GPS data for an extended period (
been unable to acquire GPS data for an extended period (
P
P
65, 92).
65, 92).
Location data are incorrect
Location data are incorrect
: Select
: Select
OFF
OFF
for
for
R
R
DEMONSTRATION
DEMONSTRATION
(
(
P
P
119).
119).
Landmark names are displayed on pictures
Landmark names are displayed on pictures
:
:
R
R
PLACE NAME STAMP
PLACE NAME STAMP
is on.
is on.
GPS data can not be deleted; to avoid recording the location with subsequent pictures, turn
GPS data can not be deleted; to avoid recording the location with subsequent pictures, turn
R
R
PLACE NAME STAMP
PLACE NAME STAMP
o (
o (
P
P
92).
92).
Intelligent Face Detection
Intelligent Face Detection
is not available.
is not available.
Intelligent Face Detection is not available in the current shooting mode
Intelligent Face Detection is not available in the current shooting mode
: Choose a di er-
: Choose a di er-
ent shooting mode (
ent shooting mode (
P
P
22).
22).
No face is detected.
No face is detected.
The subjects face is obscured by sunglasses, a hat, long hair, or other objects
The subjects face is obscured by sunglasses, a hat, long hair, or other objects
: Remove
: Remove
the obstructions.
the obstructions.
The subject’s face occupies only a small area of the frame
The subjects face occupies only a small area of the frame
: Change the composition so that
: Change the composition so that
the subject’s face occupies a larger area of the frame (
the subject’s face occupies a larger area of the frame (
P
P
37).
37).
The subjects head is tilted or horizontal
The subjects head is tilted or horizontal
: Ask the subject to hold their head straight.
: Ask the subject to hold their head straight.
The camera is tilted
The camera is tilted
: Keep the camera level (
: Keep the camera level (
P
P
18).
18).
The subjects face is poorly lit
The subjects face is poorly lit
: Shoot in bright light.
: Shoot in bright light.
Wrong subject is
Wrong subject is
selected.
selected.
The selected subject is closer to the center of the frame than the main subject. Recompose the
The selected subject is closer to the center of the frame than the main subject. Recompose the
picture or turn face detection o and frame the picture using focus lock (
picture or turn face detection o and frame the picture using focus lock (
P
P
37).
37).
127Troubleshooting
Problems and Solutions
Problem
Problem
Solution
Solution
The  ash does not  re.
The  ash does not  re.
The  ash is not available in the current shooting mode
The  ash is not available in the current shooting mode
: Choose a di erent shooting mode
: Choose a di erent shooting mode
(
(
P
P
22).
22).
The battery is exhausted
The battery is exhausted
: Charge the battery or insert a fully-charged spare battery (
: Charge the battery or insert a fully-charged spare battery (
P
P
7).
7).
The camera is in continuous mode
The camera is in continuous mode
: Select
: Select
OFF
OFF
for
for
R
R
CONTINUOUS
CONTINUOUS
(
(
P
P
46).
46).
The camera is in silent mode
The camera is in silent mode
: Turn silent mode o (
: Turn silent mode o (
P
P
111).
111).
The  ash is not raised
The  ash is not raised
: Raise the  ash (
: Raise the  ash (
P
P
41).
41).
Some  ash modes are
Some  ash modes are
not available.
not available.
The desired ash mode is not available in the current shooting mode
The desired  ash mode is not available in the current shooting mode
: Choose a di erent
: Choose a di erent
shooting mode (
shooting mode (
P
P
22).
22).
The camera is in silent mode
The camera is in silent mode
: Turn silent mode o (
: Turn silent mode o (
P
P
111).
111).
The  ash does not fully
The  ash does not fully
light the subject.
light the subject.
The subject is not in range of the  ash
The subject is not in range of the  ash
: Position the subject in range of the  ash (
: Position the subject in range of the  ash (
P
P
139).
139).
The  ash window is obstructed
The  ash window is obstructed
: Hold the camera correctly (
: Hold the camera correctly (
P
P
18).
18).
Fast shutter speed selected
Fast shutter speed selected
: Choose a slower shutter speed (
: Choose a slower shutter speed (
P
P
35, 36).
35, 36).
Pictures are blurred.
Pictures are blurred.
The lens is dirty
The lens is dirty
: Clean the lens (
: Clean the lens (
P
P
123).
123).
The lens is blocked
The lens is blocked
: Keep objects away from the lens (
: Keep objects away from the lens (
P
P
18).
18).
s
s
is displayed during shooting and the focus frame is displayed in red
is displayed during shooting and the focus frame is displayed in red
: Check focus
: Check focus
before shooting (
before shooting (
P
P
131).
131).
k
k
is displayed during shooting
is displayed during shooting
: Use the  ash or a tripod (
: Use the  ash or a tripod (
P
P
42).
42).
Pictures are mottled.
Pictures are mottled.
A slow shutter speed is selected at high temperatures
A slow shutter speed is selected at high temperatures
: This is normal and does not indi-
: This is normal and does not indi-
cated a malfunction.
cated a malfunction.
The camera has been used continuously at high temperatures or a temperature warn-
The camera has been used continuously at high temperatures or a temperature warn-
ing is displayed
ing is displayed
: Turn the camera o and wait for it to cool down.
: Turn the camera o and wait for it to cool down.
Pictures are not recorded.
Pictures are not recorded.
Power was interrupted during shooting. Before connecting the AC power adapter or DC coupler,
Power was interrupted during shooting. Before connecting the AC power adapter or DC coupler,
turn the camera o . Leaving the camera on can result in corrupted  les or damage to the memory
turn the camera o . Leaving the camera on can result in corrupted  les or damage to the memory
card or internal memory.
card or internal memory.
128 Troubleshooting
Problems and Solutions
Problem
Problem
Solution
Solution
Sounds made by the
Sounds made by the
camera are recorded with
camera are recorded with
movies.
movies.
u
u
CONTINUOUS
CONTINUOUS
is selected for
is selected for
F
F
MOVIE AF MODE
MOVIE AF MODE
: Select a di erent AF mode
: Select a di erent AF mode
(
(
P
P
100).
100).
Zoom was adjusted during shooting
Zoom was adjusted during shooting
: Do not adjust zoom during shooting.
: Do not adjust zoom during shooting.
Intelligent Face Detection is on
Intelligent Face Detection is on
: Turn Intelligent Face Detection o (
: Turn Intelligent Face Detection o (
P
P
45).
45).
Playback
Problem
Problem
Solution
Solution
Pictures are grainy.
Pictures are grainy.
The pictures were taken with a di erent make or model of camera.
The pictures were taken with a di erent make or model of camera.
No sound in movie
No sound in movie
playback.
playback.
Playback volume is too low
Playback volume is too low
: Adjust playback volume (
: Adjust playback volume (
P
P
114).
114).
The microphone was obstructed
The microphone was obstructed
: Hold the camera correctly during recording (
: Hold the camera correctly during recording (
P
P
18, 41).
18, 41).
The speaker is obstructed
The speaker is obstructed
: Hold the camera correctly during playback (
: Hold the camera correctly during playback (
P
P
75).
75).
Selected pictures are not
Selected pictures are not
deleted.
deleted.
Some of the pictures selected for deletion are protected. Remove protection using the device with
Some of the pictures selected for deletion are protected. Remove protection using the device with
which it was originally applied (
which it was originally applied (
P
P
105).
105).
File numbering is
File numbering is
unexpectedly reset.
unexpectedly reset.
The battery-chamber cover was opened while the camera was on. Turn the camera o before
The battery-chamber cover was opened while the camera was on. Turn the camera o before
opening the battery-chamber cover (
opening the battery-chamber cover (
P
P
14).
14).
Connections/Miscellaneous
Problem
Problem
Solution
Solution
No picture or sound.
No picture or sound.
The camera is not properly connected
The camera is not properly connected
: Connect the camera properly (
: Connect the camera properly (
P
P
76).
76).
An A/V cable was connected during movie playback
An A/V cable was connected during movie playback
: Connect the camera once movie play-
: Connect the camera once movie play-
back has ended.
back has ended.
Input on the television is set to “TV
Input on the television is set to “TV
: Set input to “VIDEO”.
: Set input to “VIDEO”.
The camera is not set to the correct video standard
The camera is not set to the correct video standard
: Match the camera
: Match the camera
Q
Q
VIDEO SYS-
VIDEO SYS-
TEM
TEM
setting to the TV (
setting to the TV (
P
P
118).
118).
The volume on the TV is too low
The volume on the TV is too low
: Adjust the volume.
: Adjust the volume.
No color
No color
Match the camera
Match the camera
Q
Q
VIDEO SYSTEM
VIDEO SYSTEM
setting to the TV (
setting to the TV (
P
P
118).
118).
129Troubleshooting
Problems and Solutions
Problem
Problem
Solution
Solution
The computer does not
The computer does not
recognize the camera.
recognize the camera.
Be sure the camera and computer are correctly connected (
Be sure the camera and computer are correctly connected (
P
P
87).
87).
Can not transfer RAW or
Can not transfer RAW or
JPEG  les to computer.
JPEG  les to computer.
Use the bundled software to transfer pictures (
Use the bundled software to transfer pictures (
P
P
82).
82).
Pictures can not be
Pictures can not be
printed.
printed.
The camera is not properly connected
The camera is not properly connected
: Connect the camera correctly (
: Connect the camera correctly (
P
P
78).
78).
The printer is o
The printer is o
: Turn the printer on.
: Turn the printer on.
Only one copy is printed/
Only one copy is printed/
the date is not printed.
the date is not printed.
The printer is not PictBridge compatible.
The printer is not PictBridge compatible.
The camera is unre-
The camera is unre-
sponsive.
sponsive.
Temporary camera malfunction
Temporary camera malfunction
: Remove and reinsert the battery (
: Remove and reinsert the battery (
P
P
9) or disconnect and
9) or disconnect and
reconnect the AC power adapter/DC coupler.
reconnect the AC power adapter/DC coupler.
The battery is exhausted
The battery is exhausted
: Charge the battery (
: Charge the battery (
P
P
7) or insert a fully-charged spare battery
7) or insert a fully-charged spare battery
(
(
P
P
9).
9).
The camera does not
The camera does not
function as expected.
function as expected.
Remove and reinsert the battery (
Remove and reinsert the battery (
P
P
9) or disconnect and reconnect the AC power adapter/DC
9) or disconnect and reconnect the AC power adapter/DC
coupler. If the problem persists, contact your FUJIFILM dealer.
coupler. If the problem persists, contact your FUJIFILM dealer.
I want to use an AC power
I want to use an AC power
adapter and DC coupler
adapter and DC coupler
overseas.
overseas.
Check the label on the AC power adapter. The AC power adapter can be used with voltages of
Check the label on the AC power adapter. The AC power adapter can be used with voltages of
100 240 V. Consult your travel agent for information on plug adapters.
100 240 V. Consult your travel agent for information on plug adapters.
No sound.
No sound.
Turn silent mode o (
Turn silent mode o (
P
P
111).
111).
130 Troubleshooting
Problems and Solutions
Problem
Problem
Solution
Solution
Hue or content of display
Hue or content of display
changes unexpectedly.
changes unexpectedly.
Choose
Choose
OFF
OFF
for
for
T
T
MONITOR SUNLIGHT MODE
MONITOR SUNLIGHT MODE
(
(
P
P
6).
6).
Time and date stamps
Time and date stamps
Time and date stamps are not correct
Time and date stamps are not correct
: Set the camera clock (
: Set the camera clock (
P
P
16).
16).
Time and date stamps appear on photographs
Time and date stamps appear on photographs
: Time and date stamps can not be deleted. To
: Time and date stamps can not be deleted. To
prevent stamps appearing on new photographs, select
prevent stamps appearing on new photographs, select
OFF
OFF
for
for
U
U
DATE STAMP
DATE STAMP
(
(
P
P
119).
119).
FinePixViewer can not
FinePixViewer can not
be installed or does not
be installed or does not
start.
start.
FinePixViewer does not support Mac OS X version 10.7 or later. Use one of the applications supplied
FinePixViewer does not support Mac OS X version 10.7 or later. Use one of the applications supplied
with Mac OS X or purchase other software.
with Mac OS X or purchase other software.
131Troubleshooting
Warning Messages and Displays
Warning Messages and Displays
The following warnings are displayed in the LCD monitor:
Warning
Warning
Description
Description
B
B
(
(
red
red
)
)
Low battery. Charge the battery (
Low battery. Charge the battery (
P
P
7) or insert a fully-charged spare battery (
7) or insert a fully-charged spare battery (
P
P
9).
9).
A
A
(
(
blinks red
blinks red
)
)
Battery exhausted. Charge the battery (
Battery exhausted. Charge the battery (
P
P
7) or insert a fully-charged spare battery (
7) or insert a fully-charged spare battery (
P
P
9).
9).
k
k
Slow shutter speed. Pictures may be blurred; use the  ash or a tripod.
Slow shutter speed. Pictures may be blurred; use the  ash or a tripod.
s
s
(
(
displayed in red with red
displayed in red with red
focus frame
focus frame
)
)
The camera can not focus. Try one of the following solutions:
The camera can not focus. Try one of the following solutions:
Use focus lock to focus on another subject at the same distance, then recompose the picture
Use focus lock to focus on another subject at the same distance, then recompose the picture
(
(
P
P
37).
37).
Use macro mode to focus when taking close-ups (
Use macro mode to focus when taking close-ups (
P
P
40).
40).
Aperture or shutter speed
Aperture or shutter speed
displayed in red
displayed in red
The subject is too bright or too dark and the picture will be over- or under-exposed. If the subject
The subject is too bright or too dark and the picture will be over- or under-exposed. If the subject
is dark, use the  ash (
is dark, use the  ash (
P
P
41).
41).
FOCUS ERROR
FOCUS ERROR
Camera malfunction or moving parts of lens obstructed. Turn the camera o and then on again,
Camera malfunction or moving parts of lens obstructed. Turn the camera o and then on again,
taking care not to touch the lens. If the message persists, contact a FUJIFILM dealer.
taking care not to touch the lens. If the message persists, contact a FUJIFILM dealer.
TURN OFF THE CAMERA
TURN OFF THE CAMERA
AND TURN ON AGAIN
AND TURN ON AGAIN
LENS CONTROL ERROR
LENS CONTROL ERROR
CARD NOT INITIALIZED
CARD NOT INITIALIZED
The memory card or internal memory is not formatted or the memory card was for-
The memory card or internal memory is not formatted or the memory card was for-
matted in a computer or other device
matted in a computer or other device
: Format the memory card or internal memory using
: Format the memory card or internal memory using
the
the
K
K
FORMAT
FORMAT
option in the camera setup menu (
option in the camera setup menu (
P
P
112).
112).
The memory card contacts require cleaning
The memory card contacts require cleaning
: Clean the contacts with a soft, dry cloth. If
: Clean the contacts with a soft, dry cloth. If
the message is repeated, format the card (
the message is repeated, format the card (
P
P
112). If the message persists, replace the card.
112). If the message persists, replace the card.
Camera malfunction
Camera malfunction
: Contact a FUJIFILM dealer.
: Contact a FUJIFILM dealer.
PROTECTED CARD
PROTECTED CARD
The memory card is locked. Unlock the card (
The memory card is locked. Unlock the card (
P
P
10).
10).
BUSY
BUSY
The memory card is incorrectly formatted. Use the camera to format the card (
The memory card is incorrectly formatted. Use the camera to format the card (
P
P
112).
112).
p
p
Turn the camera o and wait for it to cool. If no action is taken, the camera will turn o auto-
Turn the camera o and wait for it to cool. If no action is taken, the camera will turn o auto-
matically.
matically.
132 Troubleshooting
Warning Messages and Displays
Warning
Warning
Description
Description
CARD ERROR
CARD ERROR
The memory card is not formatted for use in the camera. Format the card (
The memory card is not formatted for use in the camera. Format the card (
P
P
112).
112).
The memory card contacts require cleaning or the memory card is damaged. Clean the contacts
The memory card contacts require cleaning or the memory card is damaged. Clean the contacts
with a soft, dry cloth. If the message is repeated, format the card (
with a soft, dry cloth. If the message is repeated, format the card (
P
P
112). If the message persists,
112). If the message persists,
replace the card.
replace the card.
Incompatible memory card. Use a compatible card (
Incompatible memory card. Use a compatible card (
P
P
12).
12).
Camera malfunction. Contact a FUJIFILM dealer.
Camera malfunction. Contact a FUJIFILM dealer.
a
a
MEMORY FULL
MEMORY FULL
The memory card or internal memory is full and pictures can not be recorded or copied. Delete
The memory card or internal memory is full and pictures can not be recorded or copied. Delete
pictures or insert a memory card with more free space.
pictures or insert a memory card with more free space.
b
b
MEMORY FULL
MEMORY FULL
INTERNAL MEMORY IS
INTERNAL MEMORY IS
FULL
FULL
INSERT A NEW CARD
INSERT A NEW CARD
WRITE ERROR
WRITE ERROR
Memory card error or connection error
Memory card error or connection error
: Reinsert the card or turn the camera o and then
: Reinsert the card or turn the camera o and then
on again. If the message persists, contact a FUJIFILM dealer.
on again. If the message persists, contact a FUJIFILM dealer.
Not enough memory remaining to record additional pictures
Not enough memory remaining to record additional pictures
: Delete pictures or insert
: Delete pictures or insert
a memory card with more free space.
a memory card with more free space.
The memory card or internal memory is not formatted
The memory card or internal memory is not formatted
: Format the memory card or
: Format the memory card or
internal memory (
internal memory (
P
P
112).
112).
READ ERROR
READ ERROR
The  le is corrupt or was not created with the camera
The  le is corrupt or was not created with the camera
: The  le can not be viewed.
: The  le can not be viewed.
The memory card contacts require cleaning
The memory card contacts require cleaning
: Clean the contacts with a soft, dry cloth. If
: Clean the contacts with a soft, dry cloth. If
the message is repeated, format the card (
the message is repeated, format the card (
P
P
112). If the message persists, replace the card.
112). If the message persists, replace the card.
Camera malfunction
Camera malfunction
: Contact a FUJIFILM dealer.
: Contact a FUJIFILM dealer.
133Troubleshooting
Warning Messages and Displays
Warning
Warning
Description
Description
FRAME NO. FULL
FRAME NO. FULL
The camera has run out of frame numbers (current frame number is 999-9999). Format the
The camera has run out of frame numbers (current frame number is 999-9999). Format the
memory card and select
memory card and select
RENEW
RENEW
for
for
B
B
FRAME NO.
FRAME NO.
Take a picture to reset frame num-
Take a picture to reset frame num-
bering to 100-0001, then select
bering to 100-0001, then select
CONTINUOUS
CONTINUOUS
for
for
B
B
FRAME NO.
FRAME NO.
(
(
P
P
113).
113).
PRESS AND HOLD
PRESS AND HOLD
THE DISP BUTTON TO
THE DISP BUTTON TO
DEACTIVATE SILENT MODE
DEACTIVATE SILENT MODE
An attempt was made to choose a ash mode or adjust the volume with the camera in silent
An attempt was made to choose a  ash mode or adjust the volume with the camera in silent
mode. Exit silent mode before choosing a  ash mode or adjusting the volume (
mode. Exit silent mode before choosing a  ash mode or adjusting the volume (
P
P
111).
111).
TOO MANY FRAMES
TOO MANY FRAMES
A search has returned more than 30,000 results
A search has returned more than 30,000 results
: Choose a search that returns fewer
: Choose a search that returns fewer
results.
results.
More than 999 images are selected for deletion
More than 999 images are selected for deletion
: Choose fewer images.
: Choose fewer images.
PROTECTED FRAME
PROTECTED FRAME
An attempt was made to delete, rotate, or add a voice memo to a protected picture. Remove
An attempt was made to delete, rotate, or add a voice memo to a protected picture. Remove
protection and try again (
protection and try again (
P
P
105).
105).
a
a
CAN NOT CROP
CAN NOT CROP
a
a
pictures can not be cropped.
pictures can not be cropped.
CAN NOT CROP
CAN NOT CROP
The picture is damaged or was not created with the camera.
The picture is damaged or was not created with the camera.
P
P
CANNOT EXECUTE
CANNOT EXECUTE
An attempt was made to create a resized copy at a size equal to or larger than the original.
An attempt was made to create a resized copy at a size equal to or larger than the original.
Choose a smaller size.
Choose a smaller size.
Q
Q
CANNOT EXECUTE
CANNOT EXECUTE
a
a
CANNOT EXECUTE
CANNOT EXECUTE
CAN NOT ROTATE
CAN NOT ROTATE
An attempt was made to rotate a picture that can not be rotated.
An attempt was made to rotate a picture that can not be rotated.
F
F
CAN NOT ROTATE
CAN NOT ROTATE
Movies can not be rotated.
Movies can not be rotated.
m
m
CANNOT EXECUTE
CANNOT EXECUTE
Red-eye removal can not be applied to the selected picture.
Red-eye removal can not be applied to the selected picture.
F
F
CANNOT EXECUTE
CANNOT EXECUTE
Red-eye removal can not be applied to movies.
Red-eye removal can not be applied to movies.
NO CARD
NO CARD
No memory card inserted when
No memory card inserted when
E
E
COPY
COPY
is selected. Insert a memory card.
is selected. Insert a memory card.
134 Troubleshooting
Warning Messages and Displays
Warning
Warning
Description
Description
b
b
NO IMAGE
NO IMAGE
The source selected for
The source selected for
E
E
COPY
COPY
contains no images. Select a di erent source.
contains no images. Select a di erent source.
a
a
NO IMAGE
NO IMAGE
u
u
ERROR
ERROR
The voice memo  le is corrupt
The voice memo  le is corrupt
: The voice memo can not be played back.
: The voice memo can not be played back.
Camera malfunction
Camera malfunction
: Contact a FUJIFILM dealer.
: Contact a FUJIFILM dealer.
DPOF FILE ERROR
DPOF FILE ERROR
The DPOF print order on the current memory card contains more than 999 images. Copy the
The DPOF print order on the current memory card contains more than 999 images. Copy the
pictures to internal memory and create a new print order.
pictures to internal memory and create a new print order.
CAN NOT SET DPOF
CAN NOT SET DPOF
The picture can not be printed using DPOF.
The picture can not be printed using DPOF.
F
F
CAN NOT SET DPOF
CAN NOT SET DPOF
Movies can not be printed using DPOF.
Movies can not be printed using DPOF.
COMMUNICATION ERROR
COMMUNICATION ERROR
A connection error occurred while pictures were being printed or copied to a computer or other
A connection error occurred while pictures were being printed or copied to a computer or other
device. Con rm that the device is turned on and that the USB cable is connected.
device. Con rm that the device is turned on and that the USB cable is connected.
PRINTER ERROR
PRINTER ERROR
Printer out of paper or ink, or other printer error. Check printer (see printer manual for details).
Printer out of paper or ink, or other printer error. Check printer (see printer manual for details).
To resume printing, turn the printer o and then turn it back on.
To resume printing, turn the printer o and then turn it back on.
PRINTER ERROR
PRINTER ERROR
RESUME?
RESUME?
Printer out of paper or ink, or other printer error.
Printer out of paper or ink, or other printer error.
Check printer (see printer manual for details). If
Check printer (see printer manual for details). If
printing does not resume automatically, press
printing does not resume automatically, press
MENU/OK
MENU/OK
to resume.
to resume.
CANNOT BE PRINTED
CANNOT BE PRINTED
An attempt was made to print a movie, a picture not created with the camera, or a picture in a
An attempt was made to print a movie, a picture not created with the camera, or a picture in a
format not supported by the printer. Movies and some pictures created with other devices can
format not supported by the printer. Movies and some pictures created with other devices can
not be printed; if the picture is a still picture created with the camera, check the printer manual
not be printed; if the picture is a still picture created with the camera, check the printer manual
to con rm that the printer supports the JFIF-JPEG or Exif-JPEG format. If it does not, the pictures
to con rm that the printer supports the JFIF-JPEG or Exif-JPEG format. If it does not, the pictures
can not be printed.
can not be printed.
135
Appendix
Appendix
Internal Memory/Memory Card Capacity
Internal Memory/Memory Card Capacity
The following table shows the recording time or number of pictures available
at di erent image sizes. All  gures are approximate;  le size varies with the
scene recorded, producing wide variations in the number of  les that can be
stored, and the number of exposures or length remaining may not dimin-
ish at an even rate. A limited number of test pictures can be taken when no
memory card is inserted.
FinePix F770EXR
Medium
Medium
O
O
Internal memory
Internal memory
(approx. 30 MB)
(approx. 30 MB)
4 GB
4 GB
8 GB
8 GB
T
T
FINE
FINE
NORMAL
NORMAL
FINE
FINE
NORMAL
NORMAL
FINE
FINE
NORMAL
NORMAL
Photographs
Photographs
O
O
4:3
4:3
4
4
7
7
610
610
970
970
1240
1240
1970
1970
O
O
16:9
16:9
6
6
10
10
810
810
1290
1290
1650
1650
2620
2620
P
P
4:3
4:3
7
7
14
14
970
970
1900
1900
1970
1970
3850
3850
P
P
16:9
16:9
10
10
19
19
1280
1280
2480
2480
2590
2590
5030
5030
Q
Q
4:3
4:3
15
15
28
28
1900
1900
3570
3570
3850
3850
7250
7250
Q
Q
16:9
16:9
27
27
41
41
3470
3470
5060
5060
7040
7040
10270
10270
Movies
Movies
i
i
1920
1920
1
1
15 sec.
15 sec.
37 min.
37 min.
76 min.
76 min.
h
h
1280
1280
1
1
20 sec.
20 sec.
48 min.
48 min.
98 min.
98 min.
f
f
2
2
51 sec.
51 sec.
113 min.
113 min.
229 min.
229 min.
k
k
640
640
×
×
480
480
3
3
38 sec.
38 sec.
84 min.
84 min.
171 min.
171 min.
k
k
320
320
×
×
240
240
3
3
77 sec.
77 sec.
168 min.
168 min.
342 min.
342 min.
k
k
320
320
×
×
112
112
3
3
38 sec.
38 sec.
84 min.
84 min.
171 min.
171 min.
1 Use a G card or better. Individual movies can not exceed 29 minutes in length.
2 Individual movies can not exceed 120 minutes in length.
3 Use a G card or better. Individual movies can not exceed 30 seconds in length.
136 Appendix
Internal Memory/Memory Card Capacity
FinePix F750EXR
Medium
Medium
O
O
Internal memory
Internal memory
(approx. 25 MB)
(approx. 25 MB)
4 GB
4 GB
8 GB
8 GB
T
T
FINE
FINE
NORMAL
NORMAL
FINE
FINE
NORMAL
NORMAL
FINE
FINE
NORMAL
NORMAL
Photographs
Photographs
O
O
4:3
4:3
3
3
6
6
620
620
990
990
1250
1250
1990
1990
O
O
16:9
16:9
5
5
8
8
830
830
1310
1310
1670
1670
2640
2640
P
P
4:3
4:3
6
6
12
12
990
990
1930
1930
1990
1990
3880
3880
P
P
16:9
16:9
8
8
15
15
1300
1300
2530
2530
2620
2620
5080
5080
Q
Q
4:3
4:3
12
12
23
23
1930
1930
3640
3640
3880
3880
7320
7320
Q
Q
16:9
16:9
22
22
33
33
3540
3540
5160
5160
7110
7110
10370
10370
Movies
Movies
i
i
1920
1920
1
1
12 sec.
12 sec.
38 min.
38 min.
76 min.
76 min.
h
h
1280
1280
1
1
16 sec.
16 sec.
49 min.
49 min.
98 min.
98 min.
f
f
2
2
40 sec.
40 sec.
115 min.
115 min.
232 min.
232 min.
k
k
640
640
×
×
480
480
3
3
30 sec.
30 sec.
85 min.
85 min.
172 min.
172 min.
k
k
320
320
×
×
240
240
3
3
62 sec.
62 sec.
172 min.
172 min.
345 min.
345 min.
k
k
320
320
×
×
112
112
3
3
31 sec.
31 sec.
86 min.
86 min.
172 min.
172 min.
1 Use a G card or better. Individual movies can not exceed 29 minutes in length.
2 Individual movies can not exceed 120 minutes in length.
3 Use a G card or better. Individual movies can not exceed 30 seconds in length.
137Appendix
Speci cations
Speci cations
System
Model
Model
Digital Camera FinePix F770EXR/F750EXR
Digital Camera FinePix F770EXR/F750EXR
E ective pixels
E ective pixels
16 million
16 million
Image sensor
Image sensor
/
/
-in., EXR CMOS with primary color  lter
-in., EXR CMOS with primary color  lter
Storage media
Storage media
• Internal memory
• Internal memory
F770EXR
F770EXR
: approx. 30 MB
: approx. 30 MB
F750EXR
F750EXR
: approx. 25 MB
: approx. 25 MB
• SD/SDHC/SDXC memory cards
• SD/SDHC/SDXC memory cards
File system
File system
Compliant with
Compliant with
D
D
esign Rule for
esign Rule for
C
C
amera
amera
F
F
ile System
ile System
(DCF)
(DCF)
, Exif 2.3, and
, Exif 2.3, and
D
D
igital
igital
P
P
rint
rint
O
O
rder
rder
F
F
ormat
ormat
(DPOF)
(DPOF)
File format
File format
Still pictures
Still pictures
: Exif 2.3 JPEG
: Exif 2.3 JPEG
(compressed)
(compressed)
; RAW
; RAW
(original RAF format, special-purpose software
(original RAF format, special-purpose software
required)
required)
; RAW+JPG available
; RAW+JPG available
Still pictures (3D)
Still pictures (3D)
: MPO
: MPO
Movies
Movies
: MOV
: MOV
(H.264)
(H.264)
Audio
Audio
: WAV
: WAV
Image size
Image size
(pixels)
(pixels)
O
O
4 : 3
4 : 3
: 4,608 × 3,456
: 4,608 × 3,456
O
O
3 : 2
3 : 2
: 4,608 × 3,072
: 4,608 × 3,072
O
O
16 : 9
16 : 9
: 4,608 × 2,592
: 4,608 × 2,592
P
P
4 : 3
4 : 3
: 3,264 × 2,448
: 3,264 × 2,448
P
P
3 : 2
3 : 2
: 3,264 × 2,176
: 3,264 × 2,176
P
P
16 : 9
16 : 9
: 3,264 × 1,840
: 3,264 × 1,840
Q
Q
4 : 3
4 : 3
: 2,304 × 1,728
: 2,304 × 1,728
Q
Q
3 : 2
3 : 2
: 2,304 × 1,536
: 2,304 × 1,536
Q
Q
16 : 9
16 : 9
: 1,920 × 1,080
: 1,920 × 1,080
F770EXR
F770EXR
r
r
MOTION PANORAMA
MOTION PANORAMA
v
v
: 1,624 × 11,520
: 1,624 × 11,520
(tall)
(tall)
/11,520 × 1,080
/11,520 × 1,080
(wide)
(wide)
r
r
MOTION PANORAMA
MOTION PANORAMA
w
w
: 1,624 × 5,760
: 1,624 × 5,760
(tall)
(tall)
/5,760 × 1,080
/5,760 × 1,080
(wide)
(wide)
r
r
MOTION PANORAMA
MOTION PANORAMA
x
x
: 1,624 × 3,840
: 1,624 × 3,840
(tall)
(tall)
/3,840 × 1,080
/3,840 × 1,080
(wide)
(wide)
r
r
MOTION PANORAMA
MOTION PANORAMA
z
z
: 1,624 × 11,520
: 1,624 × 11,520
(tall)
(tall)
/11,520 × 1,080
/11,520 × 1,080
(wide)
(wide)
F750EXR
F750EXR
r
r
MOTION PANORAMA
MOTION PANORAMA
v
v
: 1,080 × 7,680
: 1,080 × 7,680
(tall)
(tall)
/7,680 × 720
/7,680 × 720
(wide)
(wide)
r
r
MOTION PANORAMA
MOTION PANORAMA
w
w
: 1,080 × 3,840
: 1,080 × 3,840
(tall)
(tall)
/3,840 × 720
/3,840 × 720
(wide)
(wide)
r
r
MOTION PANORAMA
MOTION PANORAMA
x
x
: 1,080 × 2,560
: 1,080 × 2,560
(tall)
(tall)
/2,560 × 720
/2,560 × 720
(wide)
(wide)
r
r
MOTION PANORAMA
MOTION PANORAMA
z
z
: 1,080 × 7,680
: 1,080 × 7,680
(tall)
(tall)
/7,680 × 720
/7,680 × 720
(wide)
(wide)
Lens
Lens
Fujinon 20 × optical zoom lens, F3.5
Fujinon 20 × optical zoom lens, F3.5
(wide angle)
(wide angle)
F5.3
– F5.3
(telephoto)
(telephoto)
Focal length
Focal length
f=4.6 mm–92.0 mm
f=4.6 mm–92.0 mm
(35-mm format equivalent: 25 mm–500 mm)
(35-mm format equivalent: 25 mm–500 mm)
Digital zoom
Digital zoom
Up to about 3.4 × with intelligent digital zoom
Up to about 3.4 × with intelligent digital zoom
(up to 68 × when combined with optical zoom)
(up to 68 × when combined with optical zoom)
Aperture
Aperture
F3.5/F7.1/F10.0
F3.5/F7.1/F10.0
(wide angle)
(wide angle)
, F5.3/F11.0/F16.0
, F5.3/F11.0/F16.0
(telephoto)
(telephoto)
; uses
; uses
N
N
eutral
eutral
D
D
ensity (
ensity (
ND
ND
)  lter
)  lter
138 Appendix
Speci cations
System
Focus range
Focus range
(distance from front of lens)
(distance from front of lens)
Approx. 45 cm (1.4 ft.)–in nity
Approx. 45 cm (1.4 ft.)–in nity
(wide angle)
(wide angle)
; 2.5 m (8.2 ft.)–in nity
; 2.5 m (8.2 ft.)–in nity
(telephoto)
(telephoto)
Macro
Macro
: approx. 5 cm–3.0 m/1.9 in.–9.8 ft.
: approx. 5 cm–3.0 m/1.9 in.–9.8 ft.
(wide angle)
(wide angle)
; 1.3 m–3.0 m/4.2 ft.–9.8 ft.
; 1.3 m–3.0 m/4.2 ft.–9.8 ft.
(telephoto)
(telephoto)
Sensitivity
Sensitivity
Standard output sensitivity equivalent to ISO 100, 200, 400, 800, 1600, 3200, 6400
Standard output sensitivity equivalent to ISO 100, 200, 400, 800, 1600, 3200, 6400
(image size
(image size
P
P
or
or
Q
Q
)
)
, 12800
, 12800
(image size
(image size
Q
Q
)
)
; AUTO, AUTO (400), AUTO(800), AUTO (1600), AUTO (3200)
; AUTO, AUTO (400), AUTO(800), AUTO (1600), AUTO (3200)
Metering
Metering
256-segment
256-segment
t
t
hrough-
hrough-
t
t
he-
he-
l
l
ens
ens
(TTL)
(TTL)
metering; MULTI, SPOT, AVERAGE
metering; MULTI, SPOT, AVERAGE
Exposure control
Exposure control
Programmed AE; aperture-priority AE; shutter-priority AE; manual exposure
Programmed AE; aperture-priority AE; shutter-priority AE; manual exposure
Exposure compensation
Exposure compensation
–2 EV – +2 EV in increments of
–2 EV – +2 EV in increments of
/
/
EV
EV
Picture stabilization
Picture stabilization
Optical stabilization (image-sensor shift)
Optical stabilization (image-sensor shift)
Shutter speed
Shutter speed
(combined
(combined
mechanical and electronic
mechanical and electronic
shutter)
shutter)
8 s–
8 s–
/
/


s
s
O
O
: ¼ s–
: ¼ s–
/
/


s
s
H
H
: 3 s–
: 3 s–
/
/


s
s
p
p
: 4 s–½ s
: 4 s–½ s
S
S
: 2 s–
: 2 s–
/
/


s
s
Other modes
Other modes
: ¼ s–
: ¼ s–
/
/


s
s
Continuous
Continuous
F770EXR
F770EXR
I
I
: Max. 200 frames; frame rate can be selected from 11, 8, 5, and 3fps (The frame rate varies
: Max. 200 frames; frame rate can be selected from 11, 8, 5, and 3fps (The frame rate varies
depending on the shooting conditions or numbers of frames in continuous shooting.)
depending on the shooting conditions or numbers of frames in continuous shooting.)
P
P
: Max. 16 frames; frame rate can be selected from 11, 8, 5, and 3fps
: Max. 16 frames; frame rate can be selected from 11, 8, 5, and 3fps
F750EXR
F750EXR
I
I
/
/
L
L
: Max. 12 frames; frame rate can be selected from 12, 6, and 3fps
: Max. 12 frames; frame rate can be selected from 12, 6, and 3fps
Focus
Focus
Mode
Mode
: Center AF, multi AF, continuous AF, tracking AF
: Center AF, multi AF, continuous AF, tracking AF
Autofocus system
Autofocus system
: Contrast-detect TTL AF
: Contrast-detect TTL AF
White balance
White balance
Custom, auto, direct sunlight, shade, daylight uorescent, warm white uorescent, cool white
Custom, auto, direct sunlight, shade, daylight  uorescent, warm white  uorescent, cool white
uorescent, incandescent, underwater
uorescent, incandescent, underwater
Self-timer
Self-timer
O , 2 sec., 10 sec.; auto shutter release (
O , 2 sec., 10 sec.; auto shutter release (
n
n
and
and
o
o
)
)
139Appendix
Speci cations
System
Flash
Flash
Auto ash; e ective range when sensitivity is set to
Auto  ash; e ective range when sensitivity is set to
AUTO
AUTO
is approx. 15 cm–3.7 m/0.4 ft.–12.1 ft.
is approx. 15 cm–3.7 m/0.4 ft.–12.1 ft.
(wide angle; note that lens may block  ash at short ranges)
(wide angle; note that lens may block  ash at short ranges)
, 90 cm–2.4 m/2.9 ft.–7.8 ft.
, 90 cm–2.4 m/2.9 ft.–7.8 ft.
(telephoto)
(telephoto)
Flash mode
Flash mode
Auto,  ll  ash, o , slow sync
Auto,  ll  ash, o , slow sync
(red-eye removal o )
(red-eye removal o )
; auto with red-eye removal,  ll  ash with red-
; auto with red-eye removal,  ll  ash with red-
eye removal, o , slow sync with red-eye removal
eye removal, o , slow sync with red-eye removal
(red-eye removal on)
(red-eye removal on)
LCD monitor
LCD monitor
3.0-in., 460k-dot color LCD monitor; frame coverage approx. 100%
3.0-in., 460k-dot color LCD monitor; frame coverage approx. 100%
Movies
Movies
i
i
1920
1920
: 1,920 × 1,080
: 1,920 × 1,080
(1080p)
(1080p)
, 30 fps
, 30 fps
f
f
: 640 × 480
: 640 × 480
(VGA)
(VGA)
, 30 fps
, 30 fps
k
k
320
320
×
×
240
240
: 160fps
: 160fps
h
h
1280
1280
: 1,280 × 720
: 1,280 × 720
(720p)
(720p)
, 30 fps
, 30 fps
k
k
640
640
×
×
480
480
: 80fps
: 80fps
k
k
320
320
×
×
112
112
: 320fps
: 320fps
Note
Note
:
:
i
i
,
,
h
h
, and
, and
f
f
movies are recorded with stereo sound.
movies are recorded with stereo sound.
Date map database was
Date map database was
created
created
October 2010
October 2010
Input/output terminals
A/V OUT
A/V OUT
(audio/video output)
(audio/video output)
NTSC or PAL output with monaural sound
NTSC or PAL output with monaural sound
Digital input/output
Digital input/output
USB 2.0 High-Speed; shares A/V OUT connector; MTP/PTP
USB 2.0 High-Speed; shares A/V OUT connector; MTP/PTP
HDMI output
HDMI output
HDMI mini connector
HDMI mini connector
140 Appendix
Speci cations
Power supply/other
Power supply
Power supply
F770EXR
F770EXR
: NP-50A rechargeable battery
: NP-50A rechargeable battery
F750EXR
F750EXR
: NP-50 rechargeable battery
: NP-50 rechargeable battery
• AC-5VX AC power adapter and CP-50 DC coupler
• AC-5VX AC power adapter and CP-50 DC coupler
(sold separately)
(sold separately)
Battery life
Battery life
(approximate
(approximate
number of frames that can
number of frames that can
be taken with a fully-charged
be taken with a fully-charged
battery)
battery)
Battery type
Battery type
Approximate number of frames
Approximate number of frames
NP-50A/NP-50 (type supplied with camera)
NP-50A/NP-50 (type supplied with camera)
300
300
CIPA standard, measured in
CIPA standard, measured in
B
B
(auto)
(auto)
mode using battery supplied with camera and SD memory card.
mode using battery supplied with camera and SD memory card.
Note
Note
: Number of shots that can be taken with battery varies with battery charge level and will
: Number of shots that can be taken with battery varies with battery charge level and will
decline at low temperatures.
decline at low temperatures.
Dimensions
Dimensions
(W × H × D)
(W × H × D)
105.1 mm × 63.3 mm × 36.0 mm/4.1 in. × 2.4 in. × 1.4 in., excluding projections
105.1 mm × 63.3 mm × 36.0 mm/4.1 in. × 2.4 in. × 1.4 in., excluding projections
(minimum depth 24.9 mm/0.9 in.)
(minimum depth 24.9 mm/0.9 in.)
Shooting weight
Shooting weight
F770EXR
F770EXR
: Approx. 234 g/8.2 oz., including battery and memory card
: Approx. 234 g/8.2 oz., including battery and memory card
F750EXR
F750EXR
: Approx. 228 g/8.0 oz., including battery and memory card
: Approx. 228 g/8.0 oz., including battery and memory card
Camera weight
Camera weight
F770EXR
F770EXR
: Approx. 213 g/7.5 oz., excluding battery, accessories, and memory card
: Approx. 213 g/7.5 oz., excluding battery, accessories, and memory card
F750EXR
F750EXR
: Approx. 209 g/7.3 oz., excluding battery, accessories, and memory card
: Approx. 209 g/7.3 oz., excluding battery, accessories, and memory card
Operating conditions
Operating conditions
Temperature
Temperature
: 0 °C – +40 °C/+32 °F +104 °F
: 0 °C – +40 °C/+32 °F – +104 °F
Humidity
Humidity
: 10–80%
: 10–80%
(no condensation)
(no condensation)
141Appendix
Speci cations
NP-50A rechargeable battery (F770EXR)
Nominal voltage
Nominal voltage
DC 3.7 V
DC 3.7 V
Nominal capacity
Nominal capacity
1000 mAh
1000 mAh
Operating temperature
Operating temperature
0 °C – +40 °C/+32 °F +104 °F
0 °C – +40 °C/+32 °F – +104 °F
Dimensions
Dimensions
(W × H × D)
(W × H × D)
35.4 mm × 40.0 mm × 6.6 mm/1.3 in. × 1.5 in. × 0.2 in.
35.4 mm × 40.0 mm × 6.6 mm/1.3 in. × 1.5 in. × 0.2 in.
Weight
Weight
Approx. 20 g/0.7 oz.
Approx. 20 g/0.7 oz.
NP-50 rechargeable battery (F750EXR)
Nominal voltage
Nominal voltage
DC 3.6 V
DC 3.6 V
Nominal capacity
Nominal capacity
1000 mAh
1000 mAh
Operating temperature
Operating temperature
0 °C – +40 °C/+32 °F +104 °F
0 °C – +40 °C/+32 °F – +104 °F
Dimensions
Dimensions
(W × H × D)
(W × H × D)
35.4 mm × 40.0 mm × 6.6 mm/1.3 in. × 1.5 in. × 0.2 in.
35.4 mm × 40.0 mm × 6.6 mm/1.3 in. × 1.5 in. × 0.2 in.
Weight
Weight
Approx. 18 g/0.6 oz.
Approx. 18 g/0.6 oz.
BC-45W battery charger
Rated input
Rated input
100 V–240 V AC, 50/60 Hz
100 V–240 V AC, 50/60 Hz
Input capacity
Input capacity
100 V
100 V
: 8.0 VA
: 8.0 VA
240 V
240 V
: 12 VA
: 12 VA
Rated output
Rated output
4.2 V DC, 550 mA
4.2 V DC, 550 mA
Supported batteries
Supported batteries
NP-50A/NP-50 rechargeable batteries
NP-50A/NP-50 rechargeable batteries
Charging time
Charging time
Approx. 150 minutes
Approx. 150 minutes
(+20 °C/+68 °F)
(+20 °C/+68 °F)
Dimensions
Dimensions
(W × H × D)
(W × H × D)
91 mm × 62 mm × 23 mm/3.5 in. × 2.4 in. × 0.9 in., excluding projections
91 mm × 62 mm × 23 mm/3.5 in. × 2.4 in. × 0.9 in., excluding projections
Weight
Weight
Approx. 67 g/2.3 oz., excluding battery
Approx. 67 g/2.3 oz., excluding battery
Operating temperature
Operating temperature
0 °C – +40 °C/+32 °F +104 °F
0 °C – +40 °C/+32 °F – +104 °F
Weight and dimensions vary with the country or region of sale.
142 Appendix
Speci cations
Notices
Notices
• Speci cations subject to change without notice; for the latest information, visit http://
www.fujifilm.com/products/digital_cameras/index.html. FUJIFILM shall not be held li-
able for damages resulting from errors in this manual.
Although the LCD monitor is manufactured using advanced high-precision technol-
ogy, small bright points and anomalous colors may appear, particularly in the vicinity
of text. This is normal for this type of LCD monitor and does not indicate a malfunc-
tion; images recorded with the camera are una ected.
Digital cameras may malfunction when exposed to strong radio interference (e.g.,
electric  elds, static electricity, or line noise).
Due to the type of lens used, some distortion may occur at the periphery of images.
This is normal.
7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN
http://www.fujifilm.com/products/digital_cameras/index.html
Restrictions on Camera Settings
Restrictions on Camera Settings
The options available in each shooting mode are listed below.
Shooting Mode
Shooting Mode
Option
Option
E
E
B
B
Adv.
Adv.
M
M
A
A
S
S
P
P
SP
SP
F
F
R
R
S
S
T
T
U
U
r
r
i
i
j
j
n
n
i
i
C
C
D
D
h
h
Z
Z
l
l
m
m
M
M
N
N
O
O
H
H
p
p
Q
Q
R
R
s
s
f
f
U
U
V
V
W
W
N
N
B
B
OFF
OFF
Q
Q
1
1
N
N
1
1
O
O
B
B
ON
ON
K
K
1
1
L
L
1
1
M
M
P
P
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
h
h
S
S
/
/
R
R
o
o
n
n
F
F
F
F
1
1
1
1
OFF
OFF
d
d
5
5
N
N
AUTO
AUTO
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
AUTO (3200)
AUTO (3200)
AUTO (1600)
AUTO (1600)
AUTO (800)
AUTO (800)
AUTO (400)
AUTO (400)
12800
12800
2
2
6400
6400
3
3
3200
3200
1600
1600
800
800
400
400
200
200
100
100
O
O
S
S
O
O
P
P
Q
Q
4
4
T
T
Restrictions on Camera Settings
Shooting Mode
Shooting Mode
Option
Option
E
E
B
B
Adv.
Adv.
M
M
A
A
S
S
P
P
SP
SP
F
F
R
R
S
S
T
T
U
U
r
r
i
i
j
j
n
n
i
i
C
C
D
D
h
h
Z
Z
l
l
m
m
M
M
N
N
O
O
H
H
p
p
Q
Q
R
R
s
s
f
f
U
U
V
V
W
W
U
U
AUTO
AUTO
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
V
V
1
1
1
1
1
1
1
1
W
W
X
X
Y
Y
Z
Z
P
P
c
c
5
5
d
d
e
e
b
b
5
5
f
f
5
5
D
D
5
5
y
y
R
R
O
O
X
X
Y
Y
P
P
I
I
OFF
OFF
1
1
1
1
1
1
1
1
1
1
Z
Z
b
b
OFF
OFF
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
5
5
ON
ON
1
1
1
1
1
1
1
1
5
5
C
C
o
o
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
p
p
q
q
F
F
r
r
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
s
s
u
u
1
1
x
x
n
n
F
F
r
r
u
u
Restrictions on Camera Settings
Shooting Mode
Shooting Mode
Option
Option
E
E
B
B
Adv.
Adv.
M
M
A
A
S
S
P
P
SP
SP
F
F
R
R
S
S
T
T
U
U
r
r
i
i
j
j
n
n
i
i
C
C
D
D
h
h
Z
Z
l
l
m
m
M
M
N
N
O
O
H
H
p
p
Q
Q
R
R
s
s
f
f
U
U
V
V
W
W
W
W
i
i
1920
1920
h
h
1280
1280
f
f
k
k
640×480
640×480
k
k
320×240
320×240
k
k
320×112
320×112
J
J
N
N
L
L
L
L
1
1
l
l
M
M
m
m
1
1
OFF
OFF
1
1
R
R
ON
ON
OFF
OFF
1
1
1
1
1
1
1
1
1
1
1
1
1
1
B
B
ON
ON
OFF
OFF
1
1
1
1
C
C
ON
ON
5
5
OFF
OFF
1
1
1
1
1
1
1
1
1
1
1
1
1
1
5
5
j
j
ON
ON
OFF
OFF
1
1
1
1
1
1
1
1
1
1
1
1
x
x
n
n
o
o
1 Automatically optimized for selected shooting mode.
2 Image sizes over Q are set to Q.
3 Image sizes over P are set to P.
4 Aspect ratio  xed at 4 : 3.
5 Fixed at settings before recording a movie.
142


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujifilm Finepix F750EXR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm Finepix F750EXR in the language / languages: English as an attachment in your email.

The manual is 2,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fujifilm Finepix F750EXR

Fujifilm Finepix F750EXR User Manual - German - 159 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info