101549
7
Zoom out
Zoom in
Previous page
1/65
Next page
13
Getting Ready
1
CHARGING THE BATTERY
12
4
Close the battery cover.
LOADING THE BATTERY AND THE MEDIA
How to replace the xD-Picture Card
Push the xD-Picture Card into the slot and then
slowly remove your finger. The lock is released and
the xD-Picture Card is pushed out.
Checking the battery charge
The viewfinder lamp lights (red) and battery
charging begins. When charging is completed, the
viewfinder lamp turns off.
h Full recharging times for completely depleted
battery
(At an ambient temperature of +21°C to 25°C
(+70°F to 77°F))
NP-40: Approx. 2 hours
!
Charging times increase at low temperatures.
!
If the viewfinder lamp blinks during charging, a charging error
has occurred and the battery cannot be charged. If this
occurs, see P.120.
!
Turning the camera on during charging interrupts the
charging.
!
Use the BC-65 Battery Charger (sold separately) to charge
battery more quickly (P.114).
Remove the camera from the cradle.
3
4
1
2
01 02
Lit red
1Plug the AC power adapter connector into the
“DC IN 5V” socket.
2Plug the AC power adapter into a power outlet.
Check that the camera is turned off. Set the
camera into the cradle.
!
Plug the camera securely into the Cradle connection socket.
Charging battery with Cradle
1There is ample remaining battery charge. (Only
displayed for 3 seconds when the camera is
turned on or the mode is changed.)
2The battery is almost half charged. (Only
displayed for 3 seconds when the camera is
turned on or the mode is changed.)
3There is insufficient charge left in the battery. The
battery will soon run out. Have a new battery ready.
4The battery is depleted. The display will shortly
go blank and the camera will stop working.
Replace or recharge the battery.
Blinking red
Lit white
Lit white
1
2
4
Lit red
3
Turn the camera on and check whether the battery level warning (X, C or V) appears on the
LCD monitor.
!
Battery with no remaining charge (“V” blinking red) may
cause camera faults such as the camera turning itself off
without retracting the lens. Always load a new or fully
charged battery.
Z”, “X” or “C” appears as a small icon on
the right-hand side of the LCD monitor.
!
The information above is a guide for photography mode.
Depending on the camera modes, the transition from “
X
to “
V” may occur more quickly.
!
Due to the nature of the battery, the battery low warning may
appear early when the camera is used in cold locations. This
is normal. Try warming the battery in your pocket or a similar
location before use.
V” appears as a large icon on the LCD monitor.
Power save function
When this function is active, it also turns off the LCD monitor (Sleep mode) to reduce power
consumption if the camera is not used for 30 seconds (P.88). If the camera is then left unused for 2
minutes or 5 minutes, the Power save function turns the camera off. To turn the camera back on, set
the Power switch to “OFF” briefly and then back to “
q” or “w”.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujifilm Finepix F710 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm Finepix F710 in the language / languages: English as an attachment in your email.

The manual is 6,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info