Manual Fujifilm finepix f70exr (page 20 of 125) (English)

289754

Zoom out

Zoom in

1/125

Before You Begin

First Steps

Basic Photography and Playback

More on Photography

More on Playback

Movies

Connections

Menus

Technical Notes

Troubleshooting

Appendix

For information on related products, visit our website at

http://www.fujifilm.com/products/index.html

Owner’s Manual

Thank you for your purchase

of this product. This manual

describes how to use your

FUJIFILM FinePix F70EXR digital

camera and the supplied

software. Be sure that you

have read and understood

its contents before using the

camera.

BL00884-200

About This Manual

Before using the camera, read this manual and the warnings on the Basic Manual. For information on

specific topics, consult the sources below.

Memory Cards

Pictures can be stored in the camera’s internal memory or on optional SD and SDHC memory cards. In this

manual, SD memory cards are referred to as “memory cards.” For more information, see page 8.

✔

Troubleshooting

..............................................

pg. 97

Having a specific problem with the camera?

Find the answer here.

✔

Glossary

........................................................

pg. 108

The meanings of some technical terms may be

found here.

✔

Table of Contents

..............................................

pg. vi

The “Table of Contents” gives an overview of the

entire manual. The principal camera operations

are listed here.

✔

Warning Messages and Displays

.....................

pg. 104

Find out what’s behind that flashing icon or

error message in the monitor or electronic

viewfinder.

✔

Camera Q & A

...................................................

pg. iii

Know what you want to do but don’t know the

name for it? Find the answer in “Camera Q & A.”

✔

Restrictions on Camera Settings

............................

See the Basic Manual for restrictions on the

options available in each shooting mode.

iii

Camera Q & A

Find items by task.

Camera Setup

Question

Key phrase

See page

How do I set the camera clock? Date and time 12

Can I set the clock to local time when I travel? Time difference 88

How do I keep the display from turning off automatically? Auto power off 91

How do I make the display brighter or darker? LCD brightness 91

How do I stop the camera beeping and clicking?

Operation and shutter volume 86

Silent mode 17

Can I change the sound the shutter makes? Shutter sound 86

What are the parts of the camera called? Parts of the camera 2

What do the icons in the display mean? Displays 3

How do I use the menus? Menus 62

What’s behind that flashing icon or error message? Messages and displays 104

How much charge is left in the battery? Battery level 14

Sharing Pictures

Question

Key phrase

See page

Can I print pictures on my home printer? Printing pictures 51

Can I copy my pictures to my computer? Viewing pictures on a computer 56

Camera Q & A

Taking Pictures

Question

Key phrase

See page

How many pictures can I take? Memory capacity 109

Is there a quick and easy way to take snapshots?

k mode

How can I avoid blurred pictures? Dual IS mode 16

How can I make good portraits? Intelligent Face Detection 20

Can I choose my own settings for different scenes? Scene position 35

Can the camera automatically adjust settings for different scenes?

r mode

Can I choose between clarity, reduced noise, and dynamic range?

s, t, and u modes

How do I shoot close-ups? Close-ups (macro mode) 27

How do I keep the flash from firing?

Flash mode 28How do I stop my subjects’ eyes glowing red when I use the flash?

How do I “fill-in” shadows on back-lit subjects?

How do I take a series of pictures in a single burst? Continuous shooting mode 71

How do I turn off the lamp on the front of the camera? AF-assist illuminator 24

How do I take a group portrait that includes the photographer? Self-timer mode 30

How do I frame pictures with the subject off to one side? Focus lock 22

Can I choose shutter speed and aperture? P and M modes 38, 39

How do I adjust exposure? Exposure compensation 25

How do I simulate the effects of different types of film? Film simulation 65

How do I shoot movies? Recording movies 47

Camera Q & A

Viewing Pictures

Question

Key phrase

See page

How do I view my pictures? Single-frame playback 41

How do I delete the current picture? The I button 19

Can I select other pictures for deletion? Deleting pictures 45

Can I zoom in on pictures during playback? Playback zoom 42

How do I view a lot of pictures at once? Multi-frame playback 43

How do I view all pictures taken on the same day? Sort by date 44

Can I protect my pictures from accidental deletion? Protect 79

Can I hide the icons in the display when viewing my pictures? Choosing a display format 41

Can I view my pictures in a slide show? Slide show 75

Can I add a short voice memo to my pictures? Voice memo 83

Can I crop unwanted elements out of my pictures? Crop 80

Can I make small copies of pictures? Resize 81

Can I copy pictures from internal memory to a memory card? Copy 81

How do I view my pictures on TV? Viewing pictures on TV 50

About This Manual .......................................................................... ii

Camera Q & A .................................................................................... iii

Before You Begi

Introduction .......................................................................................1

Symbols and Conventions ..........................................................1

Supplied Accessories ....................................................................1

Parts of the Camera .......................................................................2

Camera Displays ..........................................................................3

The Mode Dial .............................................................................. 4

First Step

Charging the Battery ..................................................................... 5

Inserting the Battery...................................................................... 6

Inserting a Memory Card ............................................................. 8

Turning the Camera on and Off .............................................. 11

Shooting Mode ............................................................................. 11

Playback Mode ..............................................................................11

Basic Setup .......................................................................................12

Basic Photography and Playbac

Taking Pictures in k (Auto) Mode ........................................ 14

Viewing Pictures ............................................................................ 19

More on Photography

B Intelligent Face Detection

Intelligent Face Detection allows the camera to automatically detect human faces and set focus and

exposure for a face anywhere in the frame for shots that emphasize portrait subjects. Choose for

group portraits (in vertical or horizontal orientations) to prevent the camera from focusing on the

background. Intelligent Face Detection also offers a red-eye removal option for removing “red-eye”

effects caused by the flash.

Turn Intelligent Face Detection on.

Press the B button to turn Intelligent Face

Detection on. The selection changes each

time the B button is pressed.

A Note

When removing red-eye effect, select ON for

a RED EYE REMOVAL in the setup menu (pg.

87).

Frame the picture.

If a face is detected, it will

be indicated by a green

border. If there is more

than one face in the

frame, the camera will

select the face closest

to the center; other faces are indicated by

white borders.

Focus.

Press the shutter button halfway

to focus on the subject in the

green border. Note that, in some

shooting modes, exposure is

adjusted for the current shooting mode

and may not be optimized for the selected

subject.

Green borderGreen border

More on Photography

C Caution

If no face is detected when the shutter button is

pressed halfway (pg. 99), the camera will focus

on the subject at the center of the display and

red-eye will not be removed.

Shoot.

Press the shutter button all the

way down to shoot.

C Caution

If the subject moves as the shutter button

is pressed, their face may not be in the area

indicated by the green border when the picture

is taken.

B Tip: Red-Eye Removal

Select ON for the R SAVE ORG IMAGE option

in the setup menu (pg. 86) to save unprocessed

copies of pictures created with red-eye removal.

Intelligent Face Detection

Intelligent Face Detection is

recommended when using the

self-timer for group- or self-

portraits (pg. 30).

When a picture taken with Intelligent Face Detection

is displayed, the camera can automatically select

faces for red-eye removal (pg. 77), playback zoom

(pg. 42), slide shows (pg. 75), printing (pg. 51), and

crop (pg. 80).

B Intelligent Face Detection

Focus Lock

To compose photographs with off-center subjects:

Position the subject in the focus frame.

Focus.

Press the shutter button halfway to set

focus and exposure. Focus and exposure

will remain locked while the shutter button

is pressed halfway (AF/AE lock).

250

3.3

Press

halfway

Repeat steps 1 and 2 as desired to refocus

before taking the picture.

Recompose the picture.

Keeping the shutter button pressed

halfway, recompose the picture.

250

3.3

Shoot.

Press the shutter-release button the rest of

the way down to take the picture.

Press the rest of

the way down

More on Photography

Focus Lock

Autofocus

Although the camera boasts a high-precision autofocus system, it may be unable to focus on the subjects

listed below. If the camera is unable to focus using autofocus, use focus lock (pg. 22) to focus on another

subject at the same distance and then recompose the photograph.

• Very shiny subjects such as mirrors or car bodies.

• Fast-moving subjects.

• Subjects photographed through a window or other reflective object.

• Dark subjects and subjects that absorb rather than reflect light, such as hair or fur.

• Insubstantial subjects, such as smoke or flame.

• Subjects that show little contrast with the background (for example, subjects in clothing that is the same

color as the background).

• Subjects positioned in front of or behind a high-contrast object that is also in the focus frame (for example, a

subject photographed against a backdrop of highly contrasting elements).

Focus Lock

The AF-Assist Illuminator

If the subject is poorly lit, the AF-assist illuminator will light to assist the focus operation when the shutter

button is pressed halfway.

AF-assist

illuminator

A Notes

• Avoid shining the AF-assist illuminator directly into your subject’s eyes. See page 87 for information on

disabling the AF-assist illuminator.

• The camera may be unable to focus using the AF-assist illuminator in some cases. If the camera is unable to

focus in macro mode (pg. 27), try increasing the distance to the subject.

• The AF-assist illuminator is not available in silent mode.

More on Photography

5 Exposure Compensation

Use exposure compensation when photographing very bright, very dark, or high-contrast subjects.

Press the selector up (5).

The exposure indicator will be displayed.

3. 3

SET

Choose a value.

Press the selector button. The effect is

visible in the display.

Choose positive (+) values

to increase exposure

Choose negative (–) values

to reduce exposure

Return to shooting mode.

Press MENU/OK to return to

shooting mode.

Take pictures.

A Note

A 5 icon and exposure indicator are displayed at

settings other than ±0. Exposure compensation is not

reset when the camera is turned off; to restore normal

exposure control, choose a value of ±0.

Choosing an Exposure Compensation Value

• Backlit subjects: choose values from +

3 EV to +1

3 EV (for an explanation of the term “EV”,

see the Glossary on page 108)

• Highly reflective subjects or very bright scenes (e.g., snowfields): +1 EV

• Scenes that are mostly sky: +1 EV

• Spotlit subjects (particularly if photographed against dark backgrounds): –

3 EV

• Subjects with low reflectivity (pine trees or dark-colored foliage): –

3 EV

5 Exposure Compensation

More on Photography

L Macro Mode (Close-ups)

For close-ups, press the selector left (L). The selection changes each time the selector is pressed.

MACRO

OFF

When macro mode is in effect, the camera focuses on subjects near the center of the frame. Use the

zoom control to compose pictures.

To exit macro mode, press the selector left (L) and select OFF. Macro mode can also be cancelled by

turning the camera off or selecting another shooting mode.

A Notes

• Use of a tripod is recommended to prevent blur caused by camera shake.

• The flash may fail to light the entire subject at very short ranges. Increase the distance to the subject and try

again.

K Using the Flash (Super Intelligent Flash)

When the flash is used, the camera’s Super Intelligent Flash system instantly analyzes the scene based

on such factors as the brightness of the subject, its position in the frame, and its distance from the

camera. Flash output and sensitivity are adjusted to ensure that the main subject is correctly exposed

while preserving the effects of ambient background lighting, even in dimly-lit indoor scenes. Use the

flash when lighting is poor, for example when shooting at night or indoors under low light.

Choose a flash mode.

Press the selector right (K). The flash mode changes each time the

selector is pressed; in modes other than 4, the current mode

is indicated by an icon in the display. Choose from the following

options:

Mode

Description

4 (AUTO FLASH)

The flash fires when required. Recommended in most situations.

K (FORCED FLASH)

The flash fires whenever a picture is taken. Use for backlit subjects or for natural

coloration when shooting in bright light.

W (SUPPRESSED

FLASH)

The flash does not fire even when the subject is poorly lit. 0 will appear in the

monitor at slow shutter speeds to warn that pictures may be blurred. Use of a

tripod is recommended.

T (SLOW SYNCHRO)

Capture both the main subject and the background under low light (note that

brightly lit scenes may be overexposed).

More on Photography

Focus.

Press the shutter button halfway to focus. If the flash will fire, X will be displayed

when the shutter button is pressed halfway. At slow shutter speeds, 0 will appear in

the display to warn that pictures may be blurred; use of a tripod is recommended.

Shoot.

Press the shutter button the rest of the way down to shoot.

C Caution

The flash may fire several times with each shot. Do not move the camera until shooting is

complete.

Red-Eye Removal

When Intelligent Face Detection is active (pg. 20), and ON is selected for a RED EYE REMOVAL

in the setup menu (pg. 87), red-eye removal is available in V, U, and Z. Red-eye removal

minimizes “red-eye” caused when light from the flash is reflected from the subject’s retinas as

shown in the illustration at right.

K Using the Flash (Super Intelligent Flash)

J Using the Self-Timer

The camera offers a ten-second timer that allows photographers to appear in their own photographs,

and a two-second timer that can be used to avoid blur caused by the camera moving when the

shutter button is pressed. The self-timer is available in all shooting modes.

Set the timer.

Press the selector down (J). The selection changes each time the selector is pressed. The

current self-timer mode is displayed in the monitor.

OFF

Choose from y (self-timer off),

c (10 s delay), or b (2 s delay)

Focus.

Press the shutter button halfway to focus.

C Caution

Stand behind the camera when using the shutter button. Standing in front of the lens can

interfere with focus and exposure.

Start the timer.

Press the shutter button the rest of the way down to start the timer.

The display in the monitor shows the number of seconds remaining

until the shutter is released. To stop the timer before the picture is

taken, press DISP/BACK.

More on Photography

The self-timer lamp on the front of the camera will blink

immediately before the picture is taken. If the two-

second timer is selected, the self-timer lamp will blink

as the timer counts down.

Intelligent Face Detection

Because it ensures that the faces of portrait subjects will be in focus, Intelligent Face Detection (pg. 20) is

recommended when using the self-timer for group portraits or self-portraits. To use the self-timer with

Intelligent Face Detection, turn Intelligent Face Detection on, set the timer as described in Step 1, and then

press the shutter button all the way down to start the timer. The camera will detect faces while the timer is

counting down and adjust focus and exposure immediately before the shutter is released. Be careful not to

move until the picture has been recorded.

A Note

The self-timer turns off automatically when the picture is taken, a different shooting mode is selected, playback

mode is selected, or the camera is turned off.

J Using the Self-Timer

AUTO

Choose for crisp, clear snapshots (pg. 14). This

mode is recommended in most situations.

EXR

To let the camera automatically

optimize settings for your current

subject, or to improve clarity, reduce

noise, or enhance dynamic range, rotate the

mode dial to O and follow the steps below:

Press MENU/OK to display the

shooting menu.

EXIT

SHOOTING MENU

MODE

ISO

DYNAMIC RANGE

IMAGE SIZE

IMAGE QUALITY

AUTO

4:3

FILM SIMULATION

Highlight A P MODE.

Press the selector right to display

the following menu.

CANCELSET

D-RANGE PRIORITY

RESOLUTION PRIORITY

HIGH ISO & LOW NOISE

AUTO

Selects EXR mode

and camera settings

for each scene.

Shooting Mode

Choose a shooting mode according to the scene or type of subject. To choose a shooting mode,

rotate the mode dial to the desired setting (pg. 4). The following modes are available:

More on Photography

Shooting Mode

Press the selector up or down to

highlight one of the following

options.

Option

Description

r P AUTO

The camera automatically

selects the scene and O

mode according to shooting

conditions.

s RESOLUTION

PRIORITY

Choose for crisp, clear shots.

t HIGH ISO &

LOW NOISE

Reduce noise in pictures taken

at high sensitivities.

u D-RANGE

PRIORITY

Increase the amount of

detail visible in highlights.

U DYNAMIC RANGE is set to

D (800%).

Press MENU/OK to select the

highlighted option.

Press DISP/BACK to exit from the

menu.

AUTO

In this mode, the camera automatically analyzes

the composition and selects the appropriate

scene mode according to the subject and

shooting conditions. The selected mode is

displayed as shown below. When the shutter

button is pressed halfway, the camera selects the

optimal P mode, which is displayed next to

the scene mode icon.

Display when

portrait subject is

detected.

Mode

Type of subject or scene detected

PORTRAIT: Human portrait subject.

LANDSCAPE: Man-made or natural landscape.

NIGHT: Poorly lit landscape.

MACRO: Subject close to camera.

BACKLIT PORTRAIT: Back-lit portrait subject.

NIGHT PORTRAIT: Poorly lit portrait subject.

Shooting Mode

o IMAGE SIZE

If S is selected for o IMAGE

SIZE in r mode, the camera

will automatically select the

optimal image size (pg. 66).

SHOOTING MENU

IMAGE SIZE

AUTO

4:3

AUTO

4:3

3:2

16: 9

4:3

3:2

16:

AUTO

(

L/M

)

FRAMES

A Notes

• L (AUTO) will be selected if the subject does not

match the scenes listed above.

• I appears on the display while in r. The

camera continuously analyzes the scene, always

trying to detect faces.

• The camera focuses continuously, increasing the

drain on the battery. The sound of the camera

focusing may be audible.

NATURAL &

This mode helps ensure good results with backlit

subjects and in other situations with difficult

lighting. Each time the shutter button is pressed,

the camera takes two shots: one shot without

the flash to preserve natural lighting, followed

immediately by a second shot with the flash. Do

not move the camera until shooting is complete.

A Notes

• Do not use where flash photography is prohibited.

The flash will fire even in silent mode.

• Only available if memory remains for two pictures.

More on Photography

Shooting Mode

NATURAL LIGHT

Capture natural light indoors,

under low light, or where the

flash can not be used. The

flash turns off and sensitivity is

raised to reduce blur.

SCENE POSITION

The camera offers a choice of “scenes,” each

adapted to particular shooting conditions or a

specific type of subject, which can be assigned

to the SP position on the mode dial:

Rotate the mode dial to SP.

Press MENU/OK to display the

following menu.

EXIT

SHOOTING MENU

SCENE POSITION

ISO

DYNAMIC RANGE

IMAGE SIZE

IMAGE QUALITY

AUTO

4:3

FILM SIMULATION

Highlight A SCENE POSITION.

Press the selector right to display

shooting mode options.

Press the selector up or down to

highlight a scene (pg. 37).

CANCELSET

Portrait with soft

overall tone and

beautiful skin tones

PRO FOCUS

PRO LOW-LIGHT

PORTRAIT

PORTRAIT ENHANCER

Press MENU/OK to select the

highlighted option.

Press DISP/BACK to exit from the

menu.

Until the setting is changed as described above,

the chosen scene will be selected whenever the

mode dial is rotated to SP.

Shooting Mode

PRO FOCUS MODE

Choose for blurring the background of a

subject such as a portrait or a flower to make it

impressive. When the shutter button is pressed,

the camera automatically takes up to 3 pictures

and merges the pictures together to create a

clear focused subject with a blurred background.

The camera can allow you to get a blurry effect

as a single lens reflex camera does.

Press the selector left or right to select

SOFTNESS in 3 steps before shooting.

A Notes

• When a subject is too close to the background, the

camera may not create effect to a picture. When

the message 5 CANNOT CREATE EFFECT appears

during focus lock, take a little distance from your

subject and use the zoom control to adjust.

• When shooting a moving subject, the function may

not work.

• When the camera fails to create effect, the message

5 PLAYBACK TO CHECK IMAGE appears. Take a

picture again.

C Caution

Hold the camera firmly while you shoot.

PRO LOW-LIGHT MODE

Choose for shooting a subject under low light

or a still subject by using the telephoto zoom.

When the shutter button is pressed, the camera

automatically takes up to 4 pictures and merges

the pictures together. Blurring caused by camera

shake can be reduced and pictures with low

noise can be taken even with high sensitivity.

A Notes

• When shooting a moving subject, the function may

not work.

• Pictures may be saved without merged, depending

on the shooting condition, or when moving the

camera a lot during shooting.

C Caution

Hold the camera firmly while you shoot.

More on Photography

Shooting Mode

Scene

Description

G PRO FOCUS

Choose for blurring the background of a subject such as a portrait or a flower to make it impressive.

F PRO LOW-LIGHT

Choose for shooting a subject under low light or a still subject by using the telephoto zoom.

C PORTRAIT

Choose for soft-toned portraits with natural skin tones.

V PORTRAIT ENHANCER

Choose for a smooth skin effect in soft-focus portraits.

K LANDSCAPE

Choose for crisp, clear daylight shots of buildings and landscapes.

L SPORT

Choose when photographing moving subjects. w QUICK AF is automatically selected for

m POWER MANAGEMENT and priority is given to faster shutter speeds.

D NIGHT

Choose this mode for poorly lit twilight or night scenes. Sensitivity is automatically raised to reduce

blur caused by camera shake.

U NIGHT (TRIPOD)

Choose this mode for slow shutter speeds when shooting at night. Use a tripod to prevent blur.

W FIREWORKS

Slow shutter speeds are used to capture the expanding burst of light from a firework. Use a tripod

to prevent blur.

E SUNSET

Record the vivid colors in sunrises and sunsets.

F SNOW

Choose for crisp, clear shots that capture the brightness of scenes dominated by shining white snow.

G BEACH

Choose for crisp, clear shots that capture the brightness of sunlit beaches.

I PARTY

Capture indoor background lighting under low-light conditions.

O FLOWER

Choose for vivid close-ups of flowers. The camera focuses in the macro range.

P TEXT

Take clear pictures of text or drawings in print. The camera focuses in the macro range.

Shooting Mode

MANUAL

In this mode, you choose both shutter speed and aperture. If desired, exposure can be altered from

the value suggested by the camera.

Rotate the mode dial to M.

Press the 5 button. Shutter speed

and aperture will be displayed.

3. 3200

SET

Shutter speed

Aperture

Press the selector up or down to

choose the aperture.

Press the selector left or right to

choose the shutter speed.

C Caution

Noise in the form of randomly-spaced bright pixels

may occur in long exposures.

Press MENU/OK to return to shooting

mode.

Take pictures.

The Exposure Indicator

The amount the picture will

be under- or over-exposed at

current settings is shown by the

exposure indicator.

3. 3200

SET

More on Photography

Shooting Mode

PROGRAM AE/

APERTURE PRIORITY AE

Mode P offers a choice of program AE (autoexposure), in which the camera sets exposure

automatically, and aperture priority AE, in which you adjust aperture to soften background details or

bring both background and foreground into focus while letting the camera control shutter speed for

optimal exposure. To take pictures in program and aperture priority AE:

Rotate the mode dial to P.

Press MENU/OK to display the

shooting menu.

Press the selector up or down to

highlight

A SHOOTING MODE.

Press the selector right to display

shooting mode options.

Press the selector up or down to

highlight an option.

SHOOTING MENU

SHOOTING MODE

4:3

AUTO

4:3

1600

AUTO

APERTURE PRIORITY AE

PROGRAM AE

Press MENU/OK to select the

highlighted option.

Press DISP/BACK to exit from the

menu.

Shooting Mode

Press the selector up (5) to display

exposure compensation (program

AE) or aperture (aperture priority

AE).

SET

3. 3

SET

Exposure compensation

(program AE)

Aperture

(aperture priority AE)

Press the selector button to choose exposure

compensation (program AE) or aperture

(aperture priority AE). If the correct exposure

can not be achieved at the aperture selected

for aperture priority AE, the shutter speed will

be displayed in red.

Press MENU/OK to return to shooting

mode.

Take pictures.

C Caution

If the subject is outside the metering range of the

camera, the shutter speed and aperture displays

will show “---”. Press the shutter button halfway to

measure exposure again.

More on Playback

Playback Options

To view the most recent picture in the monitor,

press the D button.

12 / 31 / 2050

10:00

1/250

3.3

100-0001

400

4:3

Press the selector right to view pictures

in the order recorded, left to view

pictures in reverse order. Keep the

selector pressed to scroll rapidly to the desired

frame.

Choosing a Display Format

In playback mode, press DISP/BACK to select a

playback display format.

The selection changes each time DISP/BACK is

pressed.

INFORMATION ON INFORMATION OFF

12 / 31 / 2050

10:00

1/250

3.3

100-0001

400

4:3

SORT BY DATE (pg. 42)

2050

2/13

12/31

A Note

Pictures taken using other cameras are indicated by a e (“gift image”) icon during playback.

Playback Options

Playback Zoom

Select A to zoom in on pictures displayed in

single-frame playback; select B to zoom out.

When the picture is zoomed in, the selector can

be used to view areas of the image not currently

visible in the display.

Navigation window shows

portion of image currently

displayed in monitor

Zoom indicator

Press DISP/BACK to exit zoom.

A Note

Playback zoom is not available with cropped copies

saved at a size of t or copies created with

j RESIZE (pg. 81).

Intelligent Face Detection

Pictures taken with Intelligent

Face Detection (pg. 20) are

indicated by a B icon. Press

the B button to zoom in

on the subject selected with

Intelligent Face Detection. You

can then use the zoom control to zoom in and out.

BACKZOOM

More on Playback

Playback Options

Multi-Frame Playback

To change the number of images displayed,

select B when a picture is shown full-frame in

the monitor.

10: 00

12 /31 / 2050

Select B to

increase the

number of

pictures displayed

to one frame with

previous and next,

two, nine, and a

hundred.

Select

reduce the

number of images

displayed.

Use the selector to highlight images and press

MENU/OK to view the highlighted image full frame.

In the nine- and hundred-frame displays, press

the selector up or down to view more pictures.

B Tip: Two-Frame Display

Two-frame display can be used

to compare pictures taken in A

mode.

Playback Options

Sort by Date

Choose sort-by-date mode to view pictures

taken on a selected date.

Press DISP/BACK repeatedly until

SORT BY DATE is displayed.

2050

2/13

12/31

Use the selector up or down to

highlight a date. Keep the selector

pressed to scroll rapidly to the

desired date.

Press the selector left or right to

scroll through the pictures taken

on the highlighted date. Keep the

selector pressed to scroll rapidly to

the desired frame.

More on Playback

M Deleting Pictures

The ERASE option in the playback menu can be used to delete still pictures and movies, increasing

the amount of space available on the memory card or in internal memory (for information on

deleting pictures in single-frame playback, see page 19). Note that deleted pictures can not be

recovered. Copy important pictures to a computer or other storage device before proceeding.

Press MENU/OK to display the

playback menu.

PLAYBACK MENU

RED EYE REMOVAL

ERASE

SLIDE SHOW

IMAGE ROTATE

PROTECT

CROP

EXIT

Press the selector up or down to

highlight M ERASE.

Press the selector right to display

delete options.

PLAYBACK MENU

RED EYE REMOVAL

ERASE

SLIDE SHOW

IMAGE ROTATE

PROTECT

CROP

BACK

FRAME

ALL FRAMES

Press the selector up or down to

highlight FRAME or ALL FRAMES.

Press MENU/OK to display options for

the selected item (see following

page).

B Tips: Deleting Pictures

• When a memory card is inserted, pictures will be

deleted from the memory card; otherwise, pictures

will be deleted from internal memory.

• Protected pictures can not be deleted. Remove

protection from any pictures you wish to delete (pg.

79).

• If a message appears stating that the selected

images are part of a DPOF print order, press MENU/OK

to delete the pictures.

■

FRAME

: Deleting Selected Images

Selecting FRAME displays the

dialog shown at right.

YES CANCEL

ERASE OK?

Press the selector left or right

to scroll through pictures and

press MENU/OK to delete the

current picture (the picture

is deleted immediately; be

careful not to delete the

wrong picture).

Press DISP/BACK to exit when all the desired

pictures have been deleted.

■

ALL FRAMES

: Deleting All Images

Selecting ALL FRAMES

displays the confirmation

shown at right.

ERASE ALL OK?

IT MAY TAKE A WHILE

SET

CANCEL

Highlight OK and press MENU/

OK to delete all unprotected

pictures.

The dialog shown at right is

displayed during deletion.

Press DISP/BACK to cancel

before all pictures have been

deleted (any pictures deleted

before the button was pressed can not be

recovered).

CANCELCANCEL

M Deleting Pictures

Movies

Rotate the mode dial to A (movie

mode).

STANDBY

Display shows time

available

Frame the scene using the zoom

control.

STANDBY

Zoom indicator

Press the shutter button all the way

down to start recording.

REC

z REC and time

remaining are

displayed

B Tip

There is no need to keep the shutter button pressed

during recording.

A Notes

• Focus, exposure and white balance are adjusted

automatically throughout recording. The color

and brightness of the image may vary from that

displayed before recording begins.

• If the subject is poorly lit, the AF-assist lamp

may light to assist the focus operation. To turn

the AF-assist lamp off, select OFF for the b AF

ILLUMINATOR option in the setup menu (pg. 87).

A Recording Movies

Shoot short movies at 30 frames per second. Sound is recorded via the built-in microphone; do not

cover the microphone during recording.

Press the shutter button halfway

to end recording. Recording ends

automatically when the movie

reaches maximum length or

memory is full.

C Caution

The indicator lamp lights while movies are being

recorded. Do not open the battery chamber card

during shooting or while the indicator lamp is lit.

Failure to observe this precaution could prevent the

movie from being played back.

A Note

Movies are recorded as monaural motion JPEG files.

Choosing the Frame Size

To choose the frame size,

press MENU/OK and select

o QUALITY. Choose

t (640 × 480 pixels) for

better quality, s (320 × 240

pixels) for smaller data size. Press DISP/BACK to return

to movie recording mode.

SHOOTING MENU

AF MODE

QUALITY

10m59s

15m00s

Selecting focus mode

Select F AF MODE in the shooting menu.

• w CENTER: When zooming in or out, the camera

refocus on the subject in the center of the frame.

• T CONTINUOUS: The camera continuously

adjusts focus to reflect changes in the distance to

the main subject.

A Recording Movies

Movies

D Viewing Movies

During playback, movies are

displayed in the monitor as

shown at right. The following

operations can be performed

while a movie is displayed:

PLAY

100-006

12 / 31 / 2050

10: 00

Operation

Description

Start/pause

playback

Press the selector down to start playback.

Press again to pause.

End

playback/

delete

Press the selector up to end playback. If

playback is not in progress, pressing the

selector up will delete the current movie.

Advance/

rewind

Press the selector right to advance, left to

rewind. If playback is paused, the movie

will advance or rewind one frame each

time the selector is pressed.

Adjust

volume

Press MENU/OK to pause playback and

display volume controls. Press the

selector up or down to adjust the

volume; press MENU/OK again to resume

playback.

Progress is shown in the monitor during

playback.

STOP PAUSE

Progress bar

B Tip: Viewing Movies on a Computer

Copy movies to the computer before viewing.

C Cautions

• Do not cover the speaker during playback.

• Vertical or horizontal streaks may appear in movies

containing very bright subjects. This is normal and

does not indicate a malfunction.

Connections

Viewing Pictures on TV

Connect the camera to a TV and tune the television to the video channel to show pictures to a group.

Connect the A/V cable, as shown below. Be sure that the camera is off before connecting the cable.

Connect yellow plug

to video-in jack

Connect white plug

to audio-in jack

Insert into A/V cable

connector

Press D for about a second to turn the camera on. The camera monitor turns off and pictures and

voice memos are played back on the TV. Note that the camera volume controls have no effect on

sounds played on the TV; use the television volume controls to adjust the volume.

A Note

Image quality drops during movie playback.

C Caution

When connecting the cable, be sure the connectors are fully inserted.

Connections

Printing Pictures via USB

If the printer supports PictBridge, the camera can be connected directly to the printer and

pictures can be printed without first being copied to a computer. Note that depending on

the printer, not all the functions described below may be supported.

Connecting the Camera

Connect the supplied USB cable as shown

and turn the printer on.

Press the D button for about a second

to turn the camera on. w USB will be

displayed in the monitor, followed by the

PictBridge display shown below at right.

USB

OK SET

FRAME

PICTBRIDGE

TOTAL:

00000

SHEETS

Printing Selected Pictures

Press the selector left or right to

display a picture you wish to print.

A Note

To print one copy of the current picture, proceed

directly to Step 3.

Press the selector up or down to

choose the number of copies (up

to 99). Repeat steps 1–2 to select

additional pictures.

Press MENU/OK to display a

confirmation dialog.

PRINT THESE FRAMES

TOTAL:

SHEETS

YES CANCEL

Press MENU/OK to start printing.

Printing Pictures via USB

B Tip: Printing the Date of Recording

To print the date of recording on pictures, press

DISP/BACK in steps 1–2 to display the PictBridge menu

(see “Printing the DPOF Print Order,” on pg. 53).

Press the selector up or down to highlight PRINT

WITH DATE y and press MENU/OK to return to the

PictBridge display (to print pictures without the date

of recording, select PRINT WITHOUT DATE). To

ensure that the date is correct, set the camera clock

before taking pictures. Note that the PRINT WITH

DATE y option is only available with printers that

support date printing.

A Notes

• Use an optional AC adapter and DC coupler to

power the camera for extended periods.

• Print pictures from internal memory or a memory

card that has been formatted in the camera.

• Default printer page size and print quality settings

are used when printing via direct USB connection.

During Printing

The message shown at right is

displayed during printing. Press

DISP/BACK to cancel before all

pictures are printed (depending

on the printer, printing may end

before the current picture has

printed).

PRINTING

CANCEL

If printing is interrupted, press D to turn the camera

off and then on again.

Disconnecting the Camera

Confirm that the above message is not displayed

and turn the camera off. Disconnect the USB cable.

Connections

Printing Pictures via USB

Printing the DPOF Print Order

To print the print order created with r PRINT

ORDER (DPOF) in the playback menu (pg. 54):

In the PictBridge display, press DISP/

BACK to open the PictBridge menu.

PRINT DPOF

PRINT WITH DATE

PRINT WITHOUT DATE

PICTBRIDGE

Press the selector up or down to

highlight x PRINT DPOF.

Press MENU/OK to display a

confirmation dialog.

YES CANCEL

PRINT DPOF OK?

TOTAL:

SHEETS

Press MENU/OK to start printing.

Printing Pictures via USB

The r PRINT ORDER (DPOF) option in the

playback menu can be used to create a digital

“print order” for PictBridge-compatible printers

(pg. 53) or devices that support DPOF.

DPOF

DPOF (Digital Print Order Format) is

standard that allows pictures to be printed

from “print orders” stored in internal

memory or on a memory card. The information in

the order includes the pictures to be printed and the

number of copies of each picture.

■

WITH DATE

WITH DATE y

/ WITHOUT DATE

To modify the DPOF print order, select r PRINT

ORDER (DPOF) in the playback menu and press

the selector up or down to highlight WITH

DATE y or WITHOUT DATE.

PLAYBACK MENU

VOICE MEMO

RESIZE

COPY

PRINT ORDER

WITH DATE

WITHOUT DATE

RESET ALL

WITH DATE y: Print date of

recording on pictures.

WITHOUT DATE: Print pictures without

date.

Press MENU/OK and follow the steps below.

Press the selector left or right to

display a picture you wish to

include in or remove from the print

order.

Press the selector up or down to

choose the number of copies (up

to 99). To remove a picture from

the order, press the selector down until the

number of copies is 0.

SHEETS

DPOF:

00001

PRINT ORDER

(

DPOF

)

SET

FRAME

Total number of prints

Number of copies

B Tip: Intelligent Face Detection

If the current picture was created with Intelligent

Face Detection, pressing B sets the number of

copies to the number of faces detected.

Creating a DPOF Print Order

Connections

Printing Pictures via USB

Repeat steps 1–2 to complete the

print order. Press MENU/OK to save

the print order when settings

are complete, or DISP/BACK to exit without

changing the print order.

The total number of prints is

displayed in the monitor. Press

MENU/OK to exit.

The pictures in the current

print order are indicated by a

x icon during playback.

■

RESET ALL

To cancel the current print

order, select RESET ALL in the

r PRINT ORDER (DPOF)

menu. The confirmation

shown at right will be

displayed; press MENU/OK to remove all pictures

from the order.

A Notes

• Remove the memory card to create or modify a print

order for the pictures in internal memory.

• Print orders can contain a maximum of 999 pictures.

• If a memory card is inserted

containing a print order

created by another camera, the

message shown at right will be

displayed. Pressing MENU/OK

cancels the print order; a new

print order must be created as described above.

YES CANCEL

RESET DPOF OK?

YES CANCEL

RESET DPOF OK?

YES CANCEL

RESET DPOF OK?

YES CANCEL

RESET DPOF OK?

Viewing Pictures on a Computer

The supplied FinePixViewer software can be used to copy pictures to a computer, where they can be

stored, viewed, organized, and printed. Before proceeding, install FinePixViewer as described below.

Do NOT connect the camera to the computer until installation is complete.

Installing FinePixViewer

FinePixViewer is available in Windows and Macintosh versions. Installation instructions for Windows

are on pages 56–57, those for the Macintosh on pages 58–59.

Installing FinePixViewer: Windows

Confirm that the computer meets the following system requirements:

Preinstalled versions of Windows Vista, Windows XP Home Edition, Windows XP Professional (Service Pack 2),

or Windows 2000 Professional (Service Pack 4)*

CPU

• Windows Vista: 800 MHz Pentium 4 or better (3 GHz Pentium 4 or better recommended)

• Windows XP: 800 MHz Pentium 4 or better (2 GHz Pentium 4 or better recommended)

• Windows 2000: 200 MHz Pentium or better

RAM

• Windows Vista: 512 MB or more (1 GB or more recommended)

• Windows XP: 512 MB or more

• Windows 2000: 128 MB or more

Free disk

space

A minimum of 450 MB required for installation with 600 MB available when FinePixViewer is running (15 GB or

more recommended under Windows Vista, 2 GB or more recommended under Windows XP)

Video

Video 800 × 600 pixels or more with 16-bit color or better (1,024 × 768 pixels or more with 32-bit color recommended)

Other

• Built-in USB port recommended. Operation is not guaranteed other USB ports.

• Internet connection (56 kbps or faster recommended) required to use FinePix Internet Service; Internet

connection and e-mail software required to use e-mail option.

* To check if FinePixViewer is Windows® 7-compliant, please visit http://www.fujifilm.com/support/download/camera/

software/.

C Caution

Other versions of Windows are not supported. Operation is not guaranteed on home-built computers or

computers that have been upgraded from earlier versions of Windows.

Connections

Viewing Pictures on a Computer

Start the computer. Log in to an account with administrator privileges before proceeding.

Exit any applications that may be running and insert the installer CD in a CD-ROM drive.

Windows Vista

If an AutoPlay dialog is displayed, click SETUP.exe. A “User Account Control” dialog will then be displayed;

click Allow.

The installer will start automatically; click Installing FinePixViewer and follow the on-screen

instructions to install FinePixViewer. Note that the Windows CD may be required during

installation.

If the Installer Does Not Start Automatically

If the installer does not start automatically, select Computer or My Computer from the Start menu

(Windows Vista/XP) or double-click the My Computer icon on the desktop (Windows 2000), then double-

click the FINEPIX CD icon to open the FINEPIX CD window and double-click SETUP or SETUP.exe.

If prompted to install Windows Media Player or DirectX, follow the on-screen instructions to

complete installation.

When prompted, remove the installer CD from the CD-ROM drive and click Restart to restart the

computer. Store the installer CD in a dry location out of direct sunlight in case you need to re-

install the software. The version number is printed at the top of the CD label for reference when

updating the software or contacting customer support.

Installation is now complete. Proceed to “Connecting the Camera” on page 60.

Viewing Pictures on a Computer

Installing FinePixViewer: Macintosh

Confirm that the computer meets the following system requirements:

CPU

CPU PowerPC or Intel

Pre-installed versions of Mac OS X version 10.3.9–10.5 (for the latest information, visit http://www.fujifilm.

com/)

RAM

RAM 256 MB or more

Free disk space

Free disk space A minimum of 200 MB required for installation with 400 MB available when FinePixViewer is running

Video

Video 800 × 600 pixels or more with thousands of colors or better

Other

• Built-in USB port recommended. Operation is not guaranteed other USB ports.

• Internet connection (56 kbps or faster recommended) required to use FinePix Internet Service; Internet

connection and e-mail software required to use e-mail option.

After starting the computer and quitting any applications that may be running, insert the installer

CD in a CD-ROM drive. Double-click the FinePix CD icon on the desktop and double-click

Installer for Mac OS X.

An installer dialog will be displayed; click Installing FinePixViewer to start installation. Enter

an administrator name and password when prompted and click OK, then follow the on-screen

instructions to install FinePixViewer. Click Exit to quit the installer when installation is complete.

Connections

Viewing Pictures on a Computer

Remove the installer CD from the CD-ROM drive. Note that you may be unable to remove the CD

if Safari is running; if necessary, quit Safari before removing the CD. Store the installer CD in a dry

location out of direct sunlight in case you need to re-install the software. The version number

is printed at the top of the CD label for reference when updating the software or contacting

customer support.

Select Applications in the Finder Go menu to open the applications folder.

Double-click the Image Capture icon and select Preferences… from the

Image Capture application menu.

The Image Capture preferences dialog will be displayed. Choose Other… in

the When a camera is connected, open menu, then select FPVBridge in

the “Applications/FinePixViewer” folder and click Open.

Select Quit Image Capture from the Image Capture application menu.

Installation is now complete. Proceed to “Connecting the Camera” on page 60.

Viewing Pictures on a Computer

If the pictures you wish to copy are stored

on a memory card, insert the card into the

camera (pg. 8). If no card is inserted, pictures

will be copied from internal memory.

C Caution

Loss of power during transfer could result in loss of

data or damage to internal memory or the memory

card. Charge the battery before connecting the

camera.

Turn the camera off and connect the supplied

USB cable as shown, making sure the

connectors are fully inserted. Connect the

camera directly to the computer; do not use a

USB hub or keyboard.

Press the D button for about a second to

turn the camera on. FinePixViewer will start

automatically and the “Save Image Wizard”

will be displayed. Follow the on-screen

instructions to copy pictures to the computer.

To exit without copying pictures, click Cancel.

C Caution

If FinePixViewer does not start automatically,

the software may not be correctly installed.

Disconnect the camera and reinstall the software.

For more information on using FinePixViewer,

select How to Use FinePixViewer in the

FinePixViewer Help menu.

Connecting the Camera

A Note

The camera will not turn off automatically while connected to a computer.

Connections

Viewing Pictures on a Computer

C Cautions

• Use only memory cards that have been formatted

in the camera and contain pictures taken with

the camera. If a memory card containing a large

number of images is inserted, there may be a delay

before FinePixViewer starts and FinePixViewer may

be unable to import or save images. Use a memory

card reader to transfer pictures.

• Make sure the indicator lamp is out before turning

the camera off, disconnecting the USB cable. Failure

to observe this precaution could result in loss of data

or damage to internal memory or the memory card.

• Disconnect the camera before inserting or removing

memory cards.

• Use FinePixViewer to copy voice memos.

• In some cases, it may not be possible to access

pictures saved to a network server using

FinePixViewer in the same way as on a standalone

computer.

• The user bears all applicable fees charged by the

phone company or Internet service provider when

using services that require an Internet connection.

Disconnecting the Camera

After confirming that the indicator lamp is out,

follow the on-screen instructions to turn the camera

off and disconnect the USB cable.

Updating FinePixViewer

The latest version of FinePixViewer can be

downloaded from http://www.fujifilm.com/.

Uninstalling FinePixViewer

Only uninstall FinePixViewer before reinstalling

the software or when it is no longer required.

After quitting FinePixViewer and disconnecting

the camera, drag the “FinePixViewer” folder

from “Applications” into the Trash and select

Empty Trash in the Finder menu (Macintosh), or

open the control panel and use “Programs and

Features” (Windows Vista) or “Add or Remove

Programs” (other versions of Windows) to uninstall

FinePixViewer, FinePix Resource, and FinePix Studio.

Under Windows, one or more confirmation dialogs

may be displayed; read the contents carefully before

clicking OK.

Menus

Using the Menus: Shooting Mode

The v-mode and shooting menus contain settings for a wide range of shooting conditions.

Using the

-Mode Menu

Press the v button to display the

v-MODE menu.

EXIT

FILM SIMULATION

MODE MENU

ISO

IMAGE SIZE

800

4:3

Press the selector up or down to

highlight the desired menu item.

Press the selector right to display

options for the highlighted item.

MODE MENU

ISO

800

4:3

12800

6400

3200

1600

800

400

Press the selector up or down to

highlight the desired option.

Press MENU/OK to select the

highlighted option.

Press DISP/BACK to exit from the

menu.

Menus

Using the Menus: Shooting Mode

-Mode Menu Options

Menu item

Description

Options

Default

n ISO

Adjust ISO sensitivity (pg. 64). Choose higher

values when the subject is poorly lit.

AUTO / AUTO (1600) /

AUTO (800) / AUTO (400) /

12800 / 6400 / 3200 / 1600 /

800 / 400 / 200 / 100

AUTO

o IMAGE SIZE

Choose image size and aspect ratio (pg. 64).

o 4 : 3 / o 3 : 2 / o 16 : 9 /

p 4 : 3 / p 3 : 2 / p 16 : 9 /

q 4 : 3 / q 3 : 2 / q 16 : 9

o 4 : 3

W FILM SIMULATION

Simulate the effects of different types of film

(pg. 65).

c PROVIA/STANDARD /

d Velvia/VIVID / e ASTIA/SOFT /

N B&W / f SEPIA

c PROVIA/

STANDARD

A Note

Some options are not available in all shooting modes.

Using the Menus: Shooting Mode

ISO

Control the camera’s sensitivity to light. Higher

values can be used to reduce blur when lighting

is poor; note, however, that mottling may appear

in pictures taken at high sensitivities, particularly

at settings above 1600. If AUTO or an option

such as AUTO (1600) is selected, the camera will

adjust sensitivity automatically in response to

shooting conditions. In the case of AUTO

(1600), AUTO (800), and AUTO (400), the value

in parentheses is the maximum sensitivity that

will be selected when the subject is poorly lit.

Settings other than AUTO

are shown by an icon in the

display.

IMAGE SIZE

Choose the size and aspect ratio at which still

pictures are recorded. Large pictures can be

printed at large sizes with no drop in quality;

small pictures require less memory, allowing

more pictures to be recorded.

Option

Prints at sizes up to

o 4 : 3

34 × 25 cm (13.5 × 10 in.)

o 3 : 2

34 × 23 cm (13.5 × 9 in.)

o 16 : 9

34 × 19 cm (13.5 × 7.5 in.)

p 4 : 3

24 × 18 cm (9.5 × 7 in.)

p 3 : 2

24 × 16 cm (9.5 × 6 in.)

p 16 : 9

24 × 13 cm (9.5 × 5.5 in.)

q 4 : 3

17 × 13 cm (7 × 5 in.)

q 3 : 2

17 × 12 cm (7 × 4.5 in.)

q 16 : 9

17 × 9 cm (7 × 3.5 in.)

The number of pictures that can be taken at

current settings (pg. 109) is shown to the right of

the image quality icon in the display.

ISO

100

ISO

100

Menus

Using the Menus: Shooting Mode

Aspect Ratio

Pictures with an aspect ratio of 4 : 3 have the same

proportions as the camera display. Pictures with an

aspect ratio of 3 : 2 have the same proportions as a

frame of 35-mm film, while an aspect ratio of 16 : 9 is

suited to display on High Definition (HD) devices.

4:3

4 : 3

3:2

16:9

3 : 2 16 : 9

A Note

Image quality is not reset when the camera is turned

off or another shooting mode is selected.

FILM SIMULATION

Simulate the effects of different types of film,

including sepia and black-and-white.

Option

Description

c PROVIA/

STANDARD

Standard color reproduction. Suited

to a wide range of subjects, from

portraits to landscapes.

d Velvia/

VIVID

A high-contrast palette of saturated

colors, suited to nature photographs.

e ASTIA/

SOFT

A soft-toned palette of less saturated

colors.

N B&W

Take pictures in black and white.

f SEPIA

Take pictures in sepia.

Using the Menus: Shooting Mode

Press MENU/OK to display the

shooting menu.

EXIT

SHOOTING MENU

MODE

ISO

DYNAMIC RANGE

IMAGE SIZE

IMAGE QUALITY

AUTO

4:3

FILM SIMULATION

Press the selector up or down to

highlight the desired menu item.

Press the selector right to display

options for the highlighted item.

SHOOTING MENU

IMAGE SIZE

AUTO

4:3

AUTO

4:3

3:2

16: 9

4:3

3:2

16:

AUTO

(

L/M

)

FRAMES

Press the selector up or down to

highlight the desired option.

Press MENU/OK to select the

highlighted option.

Press DISP/BACK to exit from the

menu.

Using the Shooting Menu

Menus

Using the Menus: Shooting Mode

Shooting Menu Options

Menu item

Description

Options

Default

1/2

A SCENE POSITION

Choose a scene for SP mode (pg. 35).

G/F/C/V/K/L/D/U/

W/E/F/G/I/O/P

A SHOOTING MODE

(P/A)

Choose program or aperture priority AE for P

mode (pg. 39).

P / AP

A P MODE

Choose options for O mode (pg. 32). r/s/t/ur

n ISO

Adjust ISO sensitivity (pg. 64). Choose higher

values when the subject is poorly lit.

AUTO / AUTO (1600) /

AUTO (800) / AUTO (400) /

12800 / 6400 / 3200 / 1600 /

800 / 400 / 200 / 100

AUTO

o IMAGE SIZE

Choose image size and aspect ratio (pg. 64).

o 4 : 3 / o 3 : 2 / o 16 : 9 /

p 4 : 3 / p 3 : 2 / p 16 : 9 /

q 4 : 3 / q 3 : 2 / q 16 : 9

o 4 : 3

T IMAGE QUALITY

Choose image quality (pg. 69). FINE / NORMAL NORMAL

U DYNAMIC RANGE

Enhance details in highlights for natural

contrast (pg. 69).

AUTO / A 100% /

b 200% / C 400% /

D 800%

AUTO

W FILM SIMULATION

Simulate the effects of different types of film

(pg. 65).

c PROVIA/STANDARD /

d Velvia/VIVID /

e ASTIA/SOFT /

N B&W / f SEPIA

c PROVIA/

STANDARD

Using the Menus: Shooting Mode

Menu item

Description

Options

Default

2/2

C WHITE BALANCE

Adjust color for different light sources (pg. 69).

AUTO/Q/p/q/s/t/u/r

AUTO

E CONTINUOUS

Shoot a series of pictures (pg. 71).

R/S/o/m/ OFF

OFF

B PHOTOMETRY

Choose how the camera meters exposure (pg.

72).

N/O/PN

F AF MODE

Choose how the camera selects a focus area

(pg. 72).

w/x/T

A Note

Some options are not available in all shooting modes.

Menus

Using the Menus: Shooting Mode

IMAGE QUALITY

Choose how much image files are compressed.

Select FINE (low compression) for higher image

quality, NORMAL (high compression) to increase

the number of pictures that can be stored.

DYNAMIC RANGE

Control contrast. Higher values are

recommended for scenes that include both

sunlight and deep shade or for increased

contrast when photographing such subjects as

sunlight on water, brightly-lit autumn leaves, and

portraits taken against a blue sky; note, however,

that mottling may appear in pictures taken at

higher values. If AUTO is selected, the camera

will automatically select values between 100%

and 400% in response to shooting conditions.

A Note

D 800% is available only when U DYNAMIC

RANGE is selected in O mode and an option

other than d Velvia/VIVID or e ASTIA/SOFT is

selected for W FILM SIMULATION.

WHITE BALANCE

For natural colors, choose a setting that matches

the light source (for an explanation of “white

balance,” see the Glossary on page 108).

Option

Description

AUTO

White balance adjusted automatically.

Measure a value for white balance.

For subjects in direct sunlight.

For subjects in the shade.

Use under “daylight” fluorescent lights.

Use under “warm white” fluorescent lights.

Use under “cool white” fluorescent lights.

Use under incandescent lighting.

If AUTO does not produce the desired results (for

example, when taking close-ups), select Q and

measure a value for white balance or choose the

option that matches the light source.

Using the Menus: Shooting Mode

A Notes

• At settings other than Q, auto white balance is used

with the flash. Turn the flash off (pg. 28) to take

pictures at other settings.

• Results vary with shooting conditions. Play pictures

back after shooting to check colors in the monitor.

■

: Custom White Balance

Choose Q to adjust white

balance for unusual lighting

conditions. The options at

right will be displayed; frame a

white object so that it fills the

monitor and press the shutter button all the way

down to measure white balance.

If “COMPLETED!” is displayed, press MENU/OK to

set white balance to the measured value. This

value is stored even when the battery is removed

and can be reselected by pressing MENU/OK when

custom white balance options are displayed.

If “UNDER” is displayed, raise exposure

compensation (pg. 25) and try again.

If “OVER” is displayed, lower exposure

compensation and try again.

B Tip

To give a deliberate color cast to your photographs,

measure a value for custom white balance using a

colored instead of a white object.

CUSTOM WB

NOT CHANGE CANCEL

NEW WB

SHUTTER

CUSTOM WB

NOT CHANGE CANCEL

NEW WB

SHUTTER

Menus

Using the Menus: Shooting Mode

■

TOP 12 /

TOP 3

The camera takes up to 12 (

S) or 3 (

m) pictures

while the shutter button is pressed.

A Notes: S TOP 12 / R FINAL 12 / m TOP 3 / o FINAL 3

• Focus and exposure are determined by the first

frame in each series.

• The number of pictures that can

be recorded depends on the

memory available. Additional

time may be required to record

pictures when shooting ends.

The pictures are displayed in the

monitor while recording is in progress.

A Note: The Self-Timer

If the self-timer is used, only one picture will be taken

when R FINAL 12 or o FINAL 3 is selected.

STORINGSTORING

CONTINUOUS

Capture motion in a series of pictures.

A Notes

• The flash turns off automatically. The previously-

selected flash mode is restored when OFF is

selected for E CONTINUOUS.

• Frame rate varies with shutter speed.

■

FINAL 12 /

FINAL 3

While the shutter button is pressed, the camera

takes up to 40 pictures, but only the last 12 shots

(

R) or 3 shots (

o) are recorded.

Shutter button

pressed

Shutter button

released

Last 12 (R) or 3 (o) shots recorded

Up to 40 shots

Using the Menus: Shooting Mode

PHOTOMETRY

Choose how the camera meters exposure when

Intelligent Face Detection is off.

• N MULTI: Automatic scene recognition is used

to adjust exposure for a wide range of shooting

conditions.

• O SPOT: The camera meters lighting conditions

at the center of the frame. Recommended

when the background is much brighter or

darker than the main subject. Can be used

with focus lock (pg. 22) to meter off-center

subjects.

• P AVERAGE: Exposure is set to the average for

the entire frame. Provides consistent exposure

across multiple shots with the same lighting,

and is particularly effective for landscapes and

portraits of subjects dressed in black or white.

AF MODE

This option controls how the camera selects the

focus area. Regardless of the option selected,

the camera will focus on the subject in the

center of the monitor when macro mode is on

(pg. 27).

• w CENTER: The camera

focuses on the subject in

the center of the frame. This

option can be used with

focus lock.

• x MULTI: When the shutter button is pressed

halfway, the camera detects high-contrast

subjects near the center of the frame and

selects the focus area automatically (if the focus

frame is not displayed, select w CENTER and

use focus lock; pg. 22).

250

3.3

Focus frame

Press

halfway

Menus

Using the Menus: Shooting Mode

• T CONTINUOUS:

While the

shutter button is pressed

halfway, the camera

continuously adjusts focus to

reflect changes in the

distance to the main subject in the focus frame

(see page 17; note that this increases the drain

on the battery and that the sound of the

camera focusing will be audible). Choose this

option when photographing moving subjects.

Using the Menus: Playback Mode

The v-MODE and playback menus are used to manage the pictures in internal memory or on the

memory card.

Press the D button to enter

playback mode (pg. 11).

Press the v button to display the

v-MODE menu.

MODE MENU

EXIT

SLIDE SHOW

PRINT ORDER (DPOF)

Press the selector up or down to

highlight the desired menu item.

Press the selector right to display

options for the highlighted item.

Press the selector up or down to

highlight the desired option.

Press MENU/OK to select the

highlighted option.

-Mode Menu Options

Option

Description

SLIDE SHOW

View pictures in a slide show (pg. 75).

PRINT ORDER

(DPOF)

Select pictures for printing on DPOF- and

PictBridge-compatible devices (pg. 54).

Using the

-Mode Menu

Menus

Using the Menus: Playback Mode

SLIDE SHOW

View pictures in an automated slide show.

Choose the type of show and press MENU/OK

to start. Press DISP/BACK at any time during

the show to view on-screen help. When a

movie is displayed, movie playback will begin

automatically, and the slide show will continue

when the movie ends. The show can be ended

at any time by pressing MENU/OK.

Option

Displayed in

NORMAL

Press selector left or right to go back or

skip ahead one frame. Select FADE-IN

for fade transitions between frames.

FADE-IN

NORMAL

As above, except that camera

automatically zooms in on faces

selected with Intelligent Face

detection.

FADE-IN

MULTIPLE Display several pictures at once.

A Note

The camera will not turn off automatically while a

slide show is in progress.

Using the Menus: Playback Mode

Press D to enter playback mode

(pg. 11).

Press MENU/OK to display the

playback menu.

PLAYBACK MENU

RED EYE REMOVAL

ERASE

SLIDE SHOW

IMAGE ROTATE

PROTECT

CROP

EXIT

Press the selector up or down to

highlight the desired menu item.

Press the selector right to display

options for the highlighted item.

PLAYBACK MENU

RED EYE REMOVAL

ERASE

SLIDE SHOW

IMAGE ROTATE

PROTECT

CROP

BACK

FRAME

ALL FRAMES

Press the selector up or down to

highlight the desired option.

Press MENU/OK to select the

highlighted option.

Using the Playback Menu

Menus

Using the Menus: Playback Mode

Playback Menu Options

The following options are available:

Option

Description

1/2

M ERASE

Delete all or selected pictures (pg.

45).

SLIDE SHOW

View pictures in a slide show (pg.

75).

a RED-EYE REMOVAL

Create copies with reduced red

eye (pg. 77).

N IMAGE ROTATE

Rotate pictures (pg. 78).

O PROTECT

Protect pictures from accidental

deletion (pg. 79).

R CROP

Create cropped copies of pictures

(pg. 80).

2/2

j RESIZE

Create small copies of pictures

(pg. 81).

P COPY

Copy pictures between internal

memory and a memory card (pg.

81).

Q VOICE MEMO

Add voice memos to pictures (pg.

83).

PRINT ORDER

(DPOF)

Select pictures for printing on

DPOF- and PictBridge-compatible

devices (pg. 54).

RED EYE REMOVAL

If the current picture is marked with a B icon

to indicate that it was taken with Intelligent Face

Detection, this option can be used to remove

red-eye. The camera will analyze the image; if

red-eye is detected, the image will be processed

to create a copy with reduced red-eye.

EXIT

PLAYBACK MENU

RED EYE REMOVAL

ERASE

SLIDE SHOW

IMAGE ROTATE

PROTECT

CROP

REMOVING

A Notes

• Red eye may not be removed if the camera is unable

to detect a face or the face is in profile. Results may

differ depending on the scene. Red eye can not

be removed from pictures that have already been

processed using red-eye removal or pictures created

with other devices.

• The amount of time needed to process the image

varies with the number of faces detected.

• Copies created with a RED EYE REMOVAL are

indicated by a l icon during playback.

Using the Menus: Playback Mode

IMAGE ROTATE

By default, pictures taken in

tall orientation are displayed

in wide orientation. Use this

option to display pictures in

the correct orientation in the

monitor. It has no effect on pictures displayed

on a computer or other device.

A Notes

• Protected pictures can not be rotated. Remove

protection before rotating pictures (pg. 79).

• The camera may not be able to rotate pictures

created with other devices.

To rotate a picture, play the picture back and

select N IMAGE ROTATE in the playback menu.

CANCELSET

IMAGE ROTATE

CANCELSET

IMAGE ROTATE

Press the selector down to

rotate the picture 90 ° clockwise,

up to rotate the picture 90 °

counterclockwise.

Press MENU/OK to confirm the

operation (to exit without rotating

the picture, press DISP/BACK).

The next time the picture is played back, it will

automatically be rotated.

Menus

Using the Menus: Playback Mode

PROTECT

Protect pictures from accidental deletion. The

following options are available.

■

FRAME

Protect selected pictures.

Press the selector left or right to

display the desired picture.

YES CANCEL

PROTECT OK?

UNPROTECT OK?

YES CANCEL

Picture not protected Protected picture

Press MENU/OK to protect the

picture. If the picture is already

protected, pressing MENU/OK will

remove protection from the image.

Repeat steps 1–2 to protect

additional images. Press DISP/BACK

to exit when the operation is

complete.

■

SET ALL

Press MENU/OK to protect all

pictures, or press DISP/BACK to

exit without changing picture

status.

YES CANCEL

SET ALL OK?

IT MAY TAKE A WHILE

■

RESET ALL

Press MENU/OK to remove

protection from all pictures, or

press DISP/BACK to exit without

changing picture status.

YES CANCEL

RESET ALL OK?

IT MAY TAKE A WHILE

If the number of pictures

affected is very large, the

display at right will appear

in the monitor while the

operation is in progress.

Press DISP/BACK to exit before the operation is

complete.

C Caution

Protected pictures will be deleted when the memory

card or internal memory is formatted (pg. 89).

CANCELCANCEL

Using the Menus: Playback Mode

CROP

To create a cropped copy of a picture, play

the picture back and select R CROP in the

playback menu.

Use the zoom control to zoom in and out and

use the selector to scroll the picture until the

desired portion is displayed (to exit to single-

frame playback without creating a cropped

copy, press DISP/BACK).

CANCELYES

CROP

Navigation window

shows portion of

image currently

displayed in monitor

Zoom indicator

If the size of the final copy will be t, OK

will be displayed in yellow.

B Tip: Intelligent Face Detection

If the picture was shot with

Intelligent Face Detection (pg.

20), B will be displayed in the

monitor. Press the B button

to zoom in on the selected

face.

Press MENU/OK. A confirmation

dialog will be displayed.

CANCELREC

REC OK?

Copy size (p, q, or t) is shown at the

top. Larger crops produce larger copies; all

copies have an aspect ratio of 4 : 3.

Press MENU/OK to save the cropped

copy to a separate file.

CROP

CANCEL

YES

CROP

CANCEL

YES

CROP

Menus

Using the Menus: Playback Mode

RESIZE

To create a small copy of a picture, play the

picture back and select j RESIZE in the

playback menu.

Press the selector up or down

to highlight t STANDARD or

s SMALL.

Press MENU/OK to select the

highlighted option.

Press MENU/OK to copy the picture at

the selected size.

COPY

Copy pictures between internal memory and a

memory card.

Press the selector up or down to

highlight d INTERNAL MEMORY

g x CARD (copy pictures from

internal memory to the memory card) or

x CARD g d INTERNAL MEMORY (copy

pictures from a memory card to internal

memory).

Press the selector right to display

options for the highlighted item.

CARD

INTERNAL MEMORY

CARD

COPY

ALL FRAMES

FRAME

Press the selector up or down to

highlight FRAME or ALL FRAMES.

Press MENU/OK.

Using the Menus: Playback Mode

B Tip: Copying Pictures Between Memory Cards

To copy pictures between two memory cards, insert

the source card and copy the pictures to internal

memory, then remove the source card, insert the

destination card, and copy the pictures from internal

memory.

■

FRAME

Copy selected frames.

100-0001

YES CANCEL

COPY OK?

Press the selector left or right to

display the desired picture.

Press MENU/OK to copy the picture.

Repeat steps 1–2 to copy additional

images. Press DISP/BACK to exit

when the operation is complete.

■

ALL FRAMES

Press MENU/OK to copy all

pictures, or press DISP/BACK to

exit without copying pictures.

100-0001

IT MAY TAKE

A WHILE

COPY ALL OK?

YES CANCEL

C Cautions

• Copying ends when the destination is full.

• DPOF print information is not copied (pg. 54).

Menus

Using the Menus: Playback Mode

VOICE MEMO

To add a voice memo to a

still picture, select Q VOICE

MEMO after displaying the

picture in playback mode.

A Note

Voice memos can not be added to movies or

protected pictures. Remove protection from pictures

before recording voice memos (pg. 79).

Hold the camera at a distance of about 20 cm

(8 in.) and face the microphone.

Microphone

Press MENU/OK to start recording.

RECORDING

REC RE-REC

Time remaining

Blinks red

Press MENU/OK again to end

recording. Recording ends

automatically after 30 seconds.

REC RE-REC

FINISH

A Notes

• If a voice memo already

exists for the current picture,

the options at right will be

displayed. Select RE-REC to

replace the existing memo.

• Voice memos are recorded as PCM-format WAV files

(pg. 108).

REC STANDBY

START CANCEL

REC STANDBY

START CANCEL

PLAYBACK MENU

VOICE MEMO

RESIZE

COPY

PRINT ORDER

BACK

RE-REC

PLAYBACK MENU

VOICE MEMO

RESIZE

COPY

PRINT ORDER

BACK

RE-REC

Using the Menus: Playback Mode

Playing Voice Memos

Pictures with voice memos are indicated by a h

icon during playback. To play the voice memo, press

the selector down. To pause, press the selector

down again; to end playback, press the selector up.

Press the selector left to rewind, right to fast forward.

Volume controls can be displayed by pressing the

MENU/OK button; press the selector up or down

to adjust the volume, and press MENU/OK again to

resume playback.

STOP PAUSE

Progress bar

Progress is shown

in the monitor.

A Note

The camera may not play voice memos recorded

with other devices.

C Caution

Do not cover the speaker during playback.

Speaker

Menus

The Setup Menu

Using the Setup Menu

Display the setup menu.

1.1 Press MENU/OK to display the

menu for the current mode.

1.2 Press the selector left to

highlight a left tab.

1.3 Press the selector up or down

to select P.

The setup menu appears.

SET-UP

DATE/TIME

RESET

SILENT MODE

FORMAT

TIME DIFFERENCE

OFF

ENGLISH

EXIT

Adjust settings.

2.1 Press the selector right to

activate the setup menu.

2.2 Press the selector up or down

to highlight a menu item.

CONT.

SET-UP

IMAGE DISP.

1.5 SEC

SHUTTER SOUND

OPERATION VOL.

SHUTTER VOLUME

PLAYBACK VOLUME

FRAME NO.

EXIT

2.3 Press the selector right

to display options for the

highlighted item.

2.4 Press the selector up or down

to highlight an option.

2.5 Press MENU/OK to select the

highlighted option.

2.6 Press DISP/BACK to exit from the

menu.

The Setup Menu

Setup Menu Options

Menu item

Description

Options

Default

1/4

e DATE/TIME

Set the camera clock. — —

p TIME DIFFERENCE

Set the clock to local time (pg. 88). k/j

n w

Choose a language. See page 113 ENGLISH

V SILENT MODE

Turn off the speaker, flash, and AF-assist illuminator/self-

timer lamp.

ON / OFF OFF

s RESET

Reset all settings except DATE/TIME, TIME DIFFERENCE,

BACKGROUND COLOR, and VIDEO SYSTEM to default values. A

confirmation dialog will be displayed, press the selector

left or right to highlight OK and press MENU/OK.

——

m FORMAT

Format internal memory or memory cards (pg. 89). — —

2/4

a IMAGE DISP.

Choose how long pictures are displayed after shooting

(pg. 89).

3 SEC / 1.5 SEC /

ZOOM (CONTINUOUS) / OFF

1.5 SEC

b FRAME NO.

Choose how files are named (pg. 90). CONTINUOUS / RENEW CONTINUOUS

d OPERATION VOL.

Adjust the volume of camera controls.

q (high) / m (mid) /

n (low) / EOFF (mute)

e SHUTTER VOLUME

Adjust the volume of the shutter sound.

f SHUTTER SOUND

Choose the sound made by the shutter. 2 / 3

g PLAYBACK VOLUME

Adjust the volume for movie and voice memo playback

(pg. 90).

— 7

Menus

The Setup Menu

Menu item

Description

Options

Default

3/4

g LCD BRIGHTNESS

Control the brightness of the display (pg. 91). — 0

o AUTO POWER OFF

Choose the auto power off delay (pg. 91). 5 MIN / 2 MIN / OFF 2 MIN

Z DUAL IS MODE

Reduce blur. Choose whether the function is performed

at all times when the camera is in the shooting mode

(k CONTINUOUS), only when the shutter button is

pressed halfway (l SHOOTING ONLY) or OFF.

k CONTINUOUS /

l SHOOTING ONLY /

OFF

a RED EYE REMOVAL

Remove “red-eye” effects caused by the flash. ON / OFF ON

c DIGITAL ZOOM

Enable or disable digital zoom (pg. 92). ON / OFF OFF

b AF ILLUMINATOR

Turn the AF-assist illuminator on or off (pg. 24). ON / OFF ON

4/4

R SAVE ORG IMAGE

Choose whether to save unprocessed copies of pictures

taken using red-eye removal.

ON / OFF OFF

q BACKGROUND COLOR

Choose a color scheme for menus and cursors. — BLUE

u GUIDANCE DISPLAY

Choose whether to display tool tips. ON / OFF ON

r VIDEO SYSTEM

Choose a video mode for connection to a TV (pg. 50). NTSC / PAL —

m POWER MANAGEMENT

Optimize camera performance for increased battery life,

quick focus, or display quality (pg. 93).

v/w/xv

The Setup Menu

TIME DIFFERENCE

When traveling, use this option to switch the camera clock instantly from your home time zone to the

local time at your destination.

Specify the difference between local time

and your home time zone.

1.1 Press the selector up or down

to highlight j LOCAL.

1.2 Press the selector right to

display the time difference.

SET CANCEL

12 / 31 / 2050

10:00 AM

TIME DIFFERENCE

1.3 Press the selector left or right

to highlight +, –, hours, or

minutes; press up or down to

edit. The minimum increment

is 15 minutes.

1.4 Press MENU/OK when settings

are complete.

Switch between local time and your

home time zone.

To set the camera clock to local time,

highlight j LOCAL and press MENU/OK.

To set the clock to the time in your home

time zone, select k HOME. If j LOCAL

is selected, j will be displayed in the

monitor for three seconds after the camera

enters shooting mode, and the date will be

displayed in yellow.

12 / 31 / 2050

10:00

After changing time zones, check that the

date and time are correct.

Menus

The Setup Menu

FORMAT

Format internal memory or a

memory card. If a memory

card is inserted in the camera,

x will be displayed in the

dialog shown at right and

this option will format the memory card. If no

memory card is inserted, d will be displayed

and this option will format internal memory.

Press the selector left to highlight OK and press

MENU/OK to begin formatting.

C Cautions

• All data—including protected pictures—will be

deleted. Be sure important files have been copied to

a computer or other storage device.

• Do not open the battery cover during formatting.

IMAGE DISP.

Choose how long pictures are displayed in the

monitor after shooting.

• 3 SEC: Pictures are displayed for about 3 s before

being recorded to the memory card.

• 1.5 SEC: Pictures are displayed for about 1.5 s

before being recorded to the memory card.

• ZOOM (CONTINUOUS): Pictures are displayed until

the MENU/OK button is pressed. Pictures can be

zoomed in to check fine details.

ZOOM (CONTINUOUS) is disabled in the following

case:

- A, G or F is selected in the shooting

mode.

- An option other than OFF is selected for

E CONTINUOUS.

A Notes

• Pictures taken in continuous shooting modes are

always displayed after shooting.

• The colors displayed at settings of 1.5 SEC and

3 SEC may differ from those in the final picture.

ERASE ALL DATA

FORMAT OK?

FORMAT

SET

CANCEL

ERASE ALL DATA

FORMAT OK?

FORMAT

SET

CANCEL

The Setup Menu

FRAME NO.

New pictures are stored in

image files named using

a four-digit file number

assigned by adding one to

the last file number used.

The file number is displayed during playback as

shown at right. FRAME NO. controls whether

file numbering is reset to 0001 when a new

memory card is inserted or the current memory

card or internal memory is formatted.

• CONTINUOUS: Numbering continues from the

last file number used or the first available file

number, whichever is higher. Choose this

option to reduce the number of pictures with

duplicate file names.

• RENEW: Numbering is reset to 0001 after

formatting or when a new memory card is

inserted.

A Notes

• If the frame number reaches 999-9999, the shutter

release will be disabled (pg. 106).

• Selecting s RESET (pg. 86) resets b FRAME

NO. to CONTINUOUS but does not reset frame

numbering.

• Frame numbers for pictures taken with other

cameras may differ.

PLAYBACK VOLUME

Press the selector up or down

to choose volume for movie

and voice memo playback and

press MENU/OK to select.

SET CANCEL

VOLUME

100-0001

Frame number

File

number

Directory

number

Menus

The Setup Menu

LCD BRIGHTNESS

Press the selector up or down

to choose display brightness

and press MENU/OK to select.

SET

CANCEL

LCD BRIGHTNESS

AUTO POWER OFF

Choose the length of time before the camera

turns off automatically when no operations

are performed. Shorter times increase battery

life; if OFF is selected, the camera must be

turned off manually. Note that regardless of the

option selected, the camera will not turn off

automatically when connected to a printer (pg.

51) or computer (pg. 56) or when a slide show is

in progress (pg. 75).

B Tip: Reactivating the Camera

To reactivate the camera after it has turned off

automatically, use the n button or press the D

button for about a second (pg. 11).

A Note

Although OFF is selected for o AUTO POWER OFF,

the camera will turn off automatically if no operations

are performed for five minutes in the following case:

• w QUICK AF or x CLEAR DISPLAY is selected for

m POWER MANAGEMENT.

• r is selected in P MODE.

• STANDBY is displayed in A.

• B is displayed in the shooting mode.

• G, V is selected in the shooting mode.

The Setup Menu

DIGITAL ZOOM

If ON is selected, selecting A at the maximum

optical zoom position will trigger digital zoom,

further magnifying the image. To cancel digital

zoom, zoom out to the minimum digital zoom

position and select B.

4:3

Zoom

indicator

Zoom indicator,

DIGITAL ZOOM on

Zoom indicator,

DIGITAL ZOOM off

BBAA

Digital

zoom

Optical zoomOptical zoom

C Caution

Digital zoom produces lower quality images than

optical zoom.

Menus

The Setup Menu

POWER MANAGEMENT

Optimize camera performance for increased

battery life, quick focus response, or improved

display quality. The following options are

available:

• v POWER SAVE: Monitor refresh rate is reduced.

If no operations are performed for 10 s,

the monitor will dim automatically to save

power. This option is recommended when

the camera is used for extended periods at

high temperatures to prevent mottled vertical

streaks from appearing in photographs.

• w QUICK AF:

Reduces focusing time, ensuring a

quick shutter response

• x CLEAR DISPLAY: Choose this option for a

brighter, higher quality display.

A Notes

• v POWER SAVE does not take effect when

Intelligent Face Detection is on.

• At settings other than v POWER SAVE, the

monitor will dim automatically if no operations are

performed for 30 s.

Technical Notes

Optional Accessories

The camera supports a wide range of accessories from FUJIFILM and other manufacturers.

■

Printing

PictBridge-compatible printer

(available from third-party

suppliers)

USB

■

Audio/Visual

TV (available from

third-party suppliers)

Audio/visual

output

■

Computer Related

Computer (available from

third-party suppliers)

USB

SD card slot or card reader

SD/SDHC

memory card

Printer (available

from third-party

suppliers)

Technical Notes

Optional Accessories

Accessories from FUJIFILM

The following optional accessories are available from FUJIFILM. For the latest information on the

accessories available in your region, check with your local FUJIFILM representative or visit http://www.

fujifilm.com/products/digital_cameras/index.html.

Rechargeable

Li-ion battery

NP-50 (supplied) Additional NP-50 large-capacity batteries can be

purchased as required.

Battery charger BC-50 (supplied) Replacement battery chargers can be purchased

as required. The BC-50 charges an NP-50 battery

in about 140 minutes at +23 °C (+73 °F).

AC power adapter AC-5VX (requires

CP-50)

Use for extended playback or when copying

pictures to a computer (shape of adapter and

plug vary with region of sale).

DC coupler CP-50 Connect the AC-5VX to the camera.

Caring for the Camera

To ensure continued enjoyment of the product, observe the following precautions.

Storage and Use

If the camera will not be used for an extended

period, remove the battery and memory card. Do

not store or use the camera in locations that are:

• exposed to rain, steam, or smoke

• very humid or extremely dusty

• exposed to direct sunlight or very high

temperatures, such as in a closed vehicle on a

sunny day

• extremely cold

• subject to strong vibration

• exposed to strong magnetic fields, such as

near a broadcasting antenna, power line, radar

emitter, motor, transformer, or magnet

• in contact with volatile chemicals such as

pesticides

• next to rubber or vinyl products

■

Water and Sand

Exposure to water and sand can also damage the

camera and its internal circuitry and mechanisms.

When using the camera at the beach or seaside,

avoid exposing the camera to water or sand. Do

not place the camera on a wet surface.

■

Condensation

Sudden increases in temperature, such as occur

when entering a heated building on a cold day,

can cause condensation inside the camera. If

this occurs, turn the camera off and wait an hour

before turning it on again. If condensation forms

on the memory card, remove the card and wait

for the condensation to dissipate.

Cleaning

Use a blower to remove dust from the lens and

monitor, then gently wipe with a soft, dry cloth.

Any remaining stains can be removed by wiping

gently with a piece of FUJIFILM lens-cleaning

paper to which a small amount of lens-cleaning

fluid has been applied. Care should be taken to

avoid scratching the lens or monitor. The camera

body can be cleaned with a soft, dry cloth.

Do not use alcohol, thinner, or other volatile

chemicals.

Traveling

Keep the camera in your carry-on baggage.

Checked baggage may suffer violent shocks that

could damage the camera.

Troubleshooting

Power and Battery

Problem

Possible cause

Solution

Page

Power

supply

The camera does

not turn on.

The battery is exhausted. Insert a fresh or fully-charged spare battery. 5, 14

The battery is not in the correct

orientation.

Re-insert the battery in the correct

orientation.

The battery-chamber cover is not latched. Latch the battery-chamber cover. 7

The AC adapter and DC coupler are not

connected properly.

Make sure that the AC adapter and DC

coupler are properly connected.

—

The battery runs

down quickly.

The battery is cold.

Warm the battery by placing it in a pocket

or other warm place and re-insert it in the

camera immediately before taking a picture.

—

There is dirt on the battery terminals. Clean the terminals with a soft, dry cloth. —

The camera is in r mode.

Select another shooting mode. 32

The battery has been charged many times.

The battery has reached the end of its

charging life. Purchase a new battery.

—

w QUICK AF or x CLEAR DISPLAY is

selected for m POWER MANAGEMENT.

Select v POWER SAVE to reduce the drain

on the battery.

—

T CONTINUOUS is selected for F AF

MODE.

Select a different AF mode. 72

The camera turns

off suddenly.

The battery is exhausted. Insert a fresh or fully-charged spare battery. 5, 14

The AC adapter or DC coupler has been

disconnected.

Make sure that the AC adapter and DC

coupler are properly connected.

—

Troubleshooting

Problem

Possible cause

Solution

Page

Battery

charger

Charging does

not start.

The battery is not correctly inserted. Re-insert the battery in the charger. 5

The battery is not in the correct

orientation.

Re-insert the battery in the correct

orientation.

Charging is slow. The temperature is low. Charge the battery at room temperature. —

The charging

lamp lights, but

the battery does

not charge.

There is dirt on the battery terminals. Clean the terminals with a soft, dry cloth. —

The battery has been charged many times.

The battery has reached the end of its

charging life. Purchase a new battery. If

the battery still fails to charge, contact your

FUJIFILM dealer.

—

The charger is not correctly plugged into a

power outlet.

Plug the charger correctly into the power

outlet.

—

Menus and Displays

Problem

Possible cause

Solution

Page

Menus and displays are

not in English.

English is not selected for the

n w option in the setup menu.

Select ENGLISH.12, 86

Troubleshooting

Shooting

Problem

Possible cause

Solution

Page

Taking

pictures

No picture is

taken when the

shutter button is

pressed.

Memory is full. Insert a new memory card or delete pictures. 8, 45

Memory is not formatted. Format the memory card or internal memory. 89

There is dirt on the memory card contacts. Clean the contacts with a soft, dry cloth. —

The memory card is damaged. Insert a new memory card. 8

The battery is exhausted. Insert a fresh or fully-charged spare battery. 6

The camera has turned off automatically. Turn the camera on. 11

The monitor

goes dark after

shooting.

The flash has fired.

The monitor may darken while the flash

charges. Wait for the flash to charge.

Focus

The camera does

not focus.

The subject is close to the camera. Select macro mode.

The subject is far away from the camera. Cancel macro mode.

The subject is not suited to autofocus. Use focus lock. 22

EXR AUTO

Image size varies

from shot to shot.

S is selected for o IMAGE SIZE.

Select another image size or shooting mode.

32, 34,

Intelligent

Face

Detection

Face detection

not available.

Intelligent Face Detection is not available

in the current shooting mode.

Choose a different shooting mode. 32

No face is

detected.

The subject’s face is obscured by

sunglasses, a hat, long hair, or other objects.

Remove the obstructions.

The subject’s face occupies only a small

area of the frame.

Change the composition so that the subject’s

face occupies a larger area of the frame.

The subject’s head is at an angle or the

subject is not facing the camera.

Ask the subject to face the camera and hold

their head straight.

The camera is tilted. Hold the camera straight. 15

The subject’s face is poorly lit. Shoot in bright light. —

Wrong subject

selected.

The selected subject is closer to the center

of the frame than the main subject.

Recompose the picture or turn face detection

off and frame the picture using focus lock.

20, 22

100

Troubleshooting

Problem

Possible cause

Solution

Page

Close-ups

Macro mode is

not available.

Macro mode is not available in the current

shooting mode.

Choose a different shooting mode. 32

Flash

The flash does

not fire.

The flash is charging. Wait for the flash to charge. 28

The flash is not available in the current

shooting mode.

Choose a different shooting mode. 32

The battery is exhausted. Insert a fresh or fully-charged spare battery. 6

An option other than OFF is selected for

E CONTINUOUS.

Turn E CONTINUOUS off.

Flash mode not

available.

The desired flash mode is not available in

the current shooting mode.

Choose a different shooting mode. 32

The camera is in silent mode. Turn silent mode off. 17

The flash does

not fully light the

subject.

The subject is not in range of the flash. Position the subject in range of the flash. 111

The flash window is obstructed. Hold the camera correctly. 15

Fast shutter speed selected. Choose a slower shutter speed. 38

AC adapter

Help text is

displayed.

The camera was turned on while being

Follow the on-screen instructions to enter

demo mode or press the shutter button to

cancel.

—

Problem

images

Pictures are

blurred.

The lens is dirty. Clean the lens. 96

The lens is blocked. Keep objects away from the lens. 15

R is displayed during shooting and the

focus frame is displayed in red.

Check focus before shooting. 17

0 is displayed during shooting. Use the flash or a tripod. 28

Pictures are

mottled.

Slow shutter speed selected and the

subject is poorly lit.

Choose a faster shutter speed. 38

Vertical lines

appear in

pictures.

The camera has been used continuously at

high temperatures.

Turn the camera off and wait for it to cool

down.

—

101

Troubleshooting

Problem

Possible cause

Solution

Page

Recording

Pictures are not

recorded.

Power was interrupted during shooting.

Turn the camera off before connecting the

AC adapter/DC coupler. Leaving the camera

on can result in corrupted files or damage to

the memory card or internal memory.

—

Continuous

Only one picture

is taken.

The self-timer is on and R FINAL 12 or

o FINAL 3 is selected for

E CONTINUOUS.

Turn the self-timer off. 71

Movie

Problem

Possible cause

Solution

Page

Recording

The sound of

camera focusing

is heard.

T CONTINUOUS is selected for F AF

MODE.

Select w CENTER for F AF MODE.

102

Troubleshooting

Playback

Problem

Possible cause

Solution

Page

Pictures

Pictures are

grainy.

The pictures were taken with a different make

or model of camera.

——

Playback zoom

unavailable.

The pictures were created using j RESIZE or

with a different make or model of camera.

—41, 81

Audio

No sound in

voice memo

and movie

playback.

The camera is in silent mode. Turn silent mode off. 17

Playback volume is too low. Adjust playback volume. 90

The microphone was obstructed. Hold the camera correctly during recording. 83

The speaker is obstructed. Hold the camera correctly during playback. 84

Deletion

Selected

pictures are

not deleted.

Some of the pictures selected for deletion are

protected.

Remove protection using the device with

which it was originally applied.

Frame no.

File numbering

is unexpectedly

reset.

The battery-chamber cover was opened while

the camera was on.

Turn the camera off before opening the

battery-chamber cover.

6, 90

Connections

Problem

Possible cause

Solution

Page

No picture or

sound.

The camera is not properly connected. Connect the camera correctly. 50

An A/V cable was connected during movie

playback.

Connect the camera once movie playback

has ended.

49, 50

Input on the television is set to “TV”. Set input to “VIDEO”. —

The camera is not set to the correct video

standard.

Match the camera r VIDEO SYSTEM

setting to the TV.

The volume on the television is too low. Adjust the volume. —

No color.

The camera is not set to the correct video

standard.

Match the camera r VIDEO SYSTEM

setting to the TV.

103

Troubleshooting

Problem

Possible cause

Solution

Page

Computer

The computer

does not

recognize the

camera.

The camera is not properly connected. Connect the camera correctly. 60

PictBridge

Pictures can

not be printed.

The camera is not properly connected. Connect the camera correctly. 51

The printer is off. Turn the printer on. —

Only one copy

is printed.

The printer is not PictBridge-compatible. — —

The date is not

printed.

Miscellaneous

Problem

Possible cause

Solution

Page

Nothing happens

when the shutter

button is pressed.

Temporary camera malfunction.

Remove and reinsert the battery or

disconnect and reconnect the AC adapter/

DC coupler.

The battery is exhausted. Insert a fresh or fully-charged spare battery. 6

The camera does not

function as expected.

Temporary camera malfunction.

Remove and reinsert the battery or

disconnect and reconnect the AC adapter/

DC coupler. If the problem persists, contact

your FUJIFILM dealer.

104

Warning Messages and Displays

The following warnings are displayed in the monitor:

Warning

Description

Solution

O (red) The battery is low.

Insert a fresh or fully-charged spare battery.

N (blinks red) The battery is exhausted.

Slow shutter speed. Picture may be blurred. Use the flash or mount the camera on a tripod.

(displayed in red

with red focus frame)

The camera can not focus.

• Use focus lock to focus on another subject at the

same distance, then recompose the picture (pg. 22).

• If the subject is poorly lit, try focusing at a distance of

about 2 m (6.6 ft.).

• Use macro mode to focus when taking close-ups.

Aperture or shutter

speed shown in red

The subject is too bright or too dark. The

picture will be over- or under-exposed.

If the subject is dark, use the flash.

FOCUS ERROR

Camera malfunction.

Turn the camera off and then on again, taking care not

to touch the lens. If the message persists, contact a

FUJIFILM dealer.

LENS CONTROL ERROR

TURN OFF THE CAMERA

AND TURN ON AGAIN

NO CARD

No memory card inserted when P COPY is

selected in the playback menu.

Insert a memory card.

CARD NOT INITIALIZED

The memory card or internal memory is not

formatted or the memory card was formatted

in a computer or other device.

Format the memory card or internal memory using

the m FORMAT option in the camera setup menu

(pg. 89).

The memory card contacts require cleaning.

Clean the contacts with a soft, dry cloth. If the

message is repeated, format the memory card (pg. 89).

If the message persists, replace the memory card.

Camera malfunction. Contact a FUJIFILM dealer.

PROTECTED CARD The memory card is locked. Unlock the memory card (pg. 8).

BUSY The memory card is incorrectly formatted. Use the camera to format the memory card (pg. 89).

105

Troubleshooting

Warning Messages and Displays

Warning

Description

Solution

CARD ERROR

The memory card is not formatted for use in

the camera.

Format the memory card (pg. 89).

The memory card contacts require cleaning or

the memory card is damaged.

Clean the contacts with a soft, dry cloth. If the

message is repeated, format the memory card (pg. 89).

If the message persists, replace the memory card.

Incompatible memory card. Use a compatible memory card.

Camera malfunction. Contact a FUJIFILM dealer.

x MEMORY FULL

The memory card or internal memory is full;

pictures can not be recorded or copied.

Delete pictures or insert a memory card with more

free space.

d MEMORY FULL

INTERNAL MEMORY IS FULL

INSERT A NEW CARD

WRITE ERROR

Not enough memory remaining to record

additional pictures.

Delete pictures or insert a memory card with more

free space.

The memory card or internal memory is not

formatted.

Format the memory card or internal memory (pg. 89).

Memory card error or connection error.

Re-insert the memory card or turn the camera off

and then on again. If the message persists, contact a

FUJIFILM dealer.

READ ERROR

The file is corrupt or was not created with the

camera.

The file can not be played back.

The memory card contacts require cleaning.

Clean the contacts with a soft, dry cloth. If the

message is repeated, format the memory card (pg. 89).

If the message persists, replace the memory card.

Camera malfunction. Contact a FUJIFILM dealer.

106

Warning Messages and Displays

Warning

Description

Solution

FRAME NO. FULL

The camera has run out of frame numbers

(current frame number is 999-9999).

Format the memory card and select RENEW for the

b FRAME NO. option in the G SET-UP menu.

Take a picture to reset frame numbering to 100-0001,

then return to the b FRAME NO. menu and select

CONTINUOUS.

TOO MANY FRAMES

Date for which more than 4,999 pictures exist

selected in sort-by-date view.

Choose a different date.

CAN NOT EXECUTE

Red-eye removal can not be applied to the

selected picture or movie.

—

A CAN NOT EXECUTE

PROTECTED FRAME

An attempt was made to delete, rotate, or add

a voice memo to a protected picture.

Remove protection before deleting, rotating, or

adding voice memos to pictures.

5 ERROR

Voice memo file is corrupt. The voice memo can not be played back.

Camera malfunction. Contact a FUJIFILM dealer.

x NO IMAGE

The source device selected in the playback

P COPY menu contains no pictures.

Select a different source.

d NO IMAGE

t CAN NOT CROP An attempt was made to crop a t picture.

These pictures can not be cropped.

CAN NOT CROP

The picture selected for cropping is damaged

or was not created with the camera.

t CANNOT EXECUTE An attempt was made to resize a t picture.

These pictures can not be resized.

s CANNOT EXECUTE An attempt was made to resize a s picture.

DPOF FILE ERROR

The DPOF print order on the current memory

card contains more than 999 images.

Copy the pictures to internal memory and create a

new print order.

CAN NOT SET DPOF The picture can not be printed using DPOF. —

A CAN NOT SET DPOF Movies can not be printed using DPOF. —

CAN NOT ROTATE The picture can not be rotated. —

A CAN NOT ROTATE Movies can not be rotated. —

107

Troubleshooting

Warning Messages and Displays

Warning

Description

Solution

PRESS AND HOLD

THE DISP BUTTON TO

DEACTIVATE SILENT MODE

An attempt was made to choose a flash mode

or adjust the volume with the camera in silent

mode.

Exit silent mode before choosing a flash mode or

adjusting the volume.

COMMUNICATION ERROR

A connection error occurred while pictures

were being printed or copied to a computer or

other device.

Confirm that the device is turned on and that the USB

cable is connected.

PRINTER ERROR

Printer out of paper or ink, or other printer

error.

Check printer (see printer manual for details). To

resume printing, turn the printer off and then turn it

back on.

PRINTER ERROR

RESUME?

Check printer (see printer manual for details). If

printing does not resume automatically, press MENU/OK

to resume.

CAN NOT BE PRINTED

An attempt was made to print a movie, a

picture not created with the camera, or a

picture in a format not supported by the

printer.

Movies and some pictures created with other devices

can not be printed. If the picture was created with the

camera, check the printer manual to confirm that the

printer supports the JFIF-JPEG or Exif-JPEG format. If it

does not, the pictures can not be printed.

108

Appendix

Glossary

Digital zoom: Unlike optical zoom, digital zoom does not increase the amount of visible detail. Instead, details

visible using optical zoom are simply enlarged, producing a slightly “grainy” image.

DPOF (Digital Print Order Format): A standard that allows pictures to be printed from “print orders”

stored in internal memory or on a memory card. The information in the order includes the pictures to

be printed and the number of copies of each picture.

EV (Exposure Value): The exposure value is determined by the sensitivity of the image sensor and the amount

of light that enters the camera while the image sensor is exposed. Each time the amount of light doubles, EV

increases by one; each time the amount of light is halved, EV decreases by one. The amount of light entering

the camera can be controlled by adjusting aperture and shutter speed.

Exif Print: A standard that allows information stored with pictures to be used for optimal color reproduction

during printing.

JPEG (Joint Photographic Experts Group): A compressed file format for color images. The higher the

compression rate, the greater the loss of information and more noticeable drop in quality when the picture is

displayed.

Motion JPEG: An AVI (Audio Video Interleave) format that stores sound and JPEG images in a single file. Motion

JPEG files can be played in Windows Media Player (requires DirectX 8.0 or later) or QuickTime 3.0 or later.

Smear: A phenomenon specific to CCDs which causes white streaks to appear when very bright light sources,

such as the sun or reflected sunlight, appear in the frame.

WAV (Waveform Audio Format): A standard Windows audio file format. WAV files have the extension “*.WAV” and

may be compressed or uncompressed. The camera uses uncompressed WAV. WAV files can be played using

Windows Media Player or QuickTime 3.0 or later.

White balance: The human brain automatically adapts to changes in the color of light, with the result that objects

that appear white under one light source still appear white when the color of the light source changes. Digital

cameras can mimic this adjustment by processing images according to the color of the light source. This

process is known as “white balance.”

109

Appendix

Internal Memory/Memory Card Capacity

The following table shows the recording time or number of available frames at different image

qualities. All figures are approximate; file size varies with the scene recorded, producing wide

variations in the number of files that can be stored. The number of exposures or length remaining

may not diminish at an even rate.

4 : 3

3 : 2

16 : 9

4 : 3

3 : 2

16 : 9

FINE

NORMAL

FINE

NORMAL

FINE

NORMAL

FINE

NORMAL

FINE

NORMAL

FINE

NORMAL

Size

(pixels)

(pixels) 3,616 × 2,712 3,616 × 2,400 3,616 × 2,048 2,592 × 1,944 2,592 × 1,728 2,592 × 1,440

File size

File size 3.9 MB 2.4 MB 3.4 MB 2.2 MB 2.9 MB 1.8 MB 2.5 MB 1.3 MB 2.2 MB 1.1 MB 1.9 MB 950 KB

Internal memory

(approx. 47 MB)

12 19 13 22 16 26 19 38 21 42 25 51

SD card

512 MB

512 MB 120 200 140 220 160 260 190 380 220 430 260 510

1 GB

1 GB 250 400 280 450 330 530 390 770 440 870 520 1,030

2 GB

2 GB 510 810 570 910 670 1,060 790 1,540 880 1720 1,050 2,060

SDHC card

4 GB

4 GB 1,020 1,630 1,140 1,820 1,340 2,130 1,590 3,100 1,770 3440 2,100 4,130

8 GB

8 GB 2,050 3,270 2,300 3,660 2,700 4,290 3,190 6,220 3,550 6910 4,220 8,300

16 GB

16 GB 4,080 6,500 4,570 7,260 5,370 8,520 6,330 12,350 7,050 13720 8,370 16,470

110

Internal Memory/Memory Card Capacity

4 : 3

3 : 2

16 : 9

FINE

NORMAL

FINE

NORMAL

FINE

NORMAL

Size

(pixels)

(pixels) 2,048 × 1,536 2,048 × 1,360 1,920 × 1,080 640 × 480 320 × 240

File size

File size 1.6 MB 800 KB 1.4 MB 720 KB 1.0 MB 700 KB — —

Internal memory

(approx. 47 MB)

30 60 34 67 46 69 42 sec. 1 min. 24 sec.

SD card

512 MB

512 MB 310 600 350 680 460 700 7 min. 14 min.

1 GB

1 GB 620 1,210 700 1,370 930 1,400 14 min. 28 min.

2 GB

2 GB 1,230 2,380 1,400 2,690 1,870 2,810 29 min. 57 min.*

SDHC card

4 GB

4 GB 2,480 4,770 2,820 5,390 3,760 5,640 58 min.* 114 min.*

8 GB

8 GB 4,980 9,570 5,650 10,820 7,540 11,310 116 min.* 230 min.*

16 GB

16 GB 9,880 19,000 11,230 21,480 14,970 22,460 231 min.* 457 min.*

* Total length of all movie files. Individual movies can not exceed 1GB (s) or 2GB (t), regardless of capacity of memory

card.

111

Appendix

Specifications

System

Model Digital Camera FinePix F70EXR

Effective pixels 10 million

CCD

2 -in. Super CCD EXR

Storage media • Internal memory (approx. 47 MB) • SD/SDHC memory cards (see page 8)

File system Compliant with Design Rule for Camera File System (DCF), Exif 2.2, and Digital Print Order Format

(DPOF)

File format • Still pictures: Exif 2.2 JPEG (compressed) • Movies: AVI-format Motion JPEG

• Audio: monaural WAV

Image size (pixels)

• o 4 : 3: 3,616 × 2,712 • o 3 : 2: 3,616 × 2,400 • o 16 : 9: 3,616 × 2,048

• p 4 : 3: 2,592 × 1,944 • p 3 : 2: 2,592 × 1,728 • p 16 : 9: 2,592 × 1,440

• q 4 : 3: 2,048 × 1,536 • q 3 : 2: 2,048 × 1,360 • q 16 : 9: 1,920 × 1,080

File size See pages 109–110

Lens Fujinon 10 × optical zoom lens, F3.3 (wide angle) – F5.6 (telephoto)

Focal length f=5.0 mm–50.0 mm (35-mm format equivalent: 27 mm–270 mm)

Digital zoom Approx. 4.0 × (up to 40 × when combined with optical zoom)

Aperture F3.3/F6.4 (wide angle), F5.6/F11.0 (telephoto), uses Neutral Density (ND) filter

Focus range (distance from

front of lens)

Approx. 45 cm (1.5 ft.)–infinity (wide angle); 2 m (6.6 ft.)–infinity (telephoto)

Macro: approx. 5 cm–2.5 m/2 in.–8.2 ft. (wide angle); 90 cm–2.5 m/3 ft.–8.2 ft. (telephoto)

Quick AF: approx. 1 m (3.3 ft.)–infinity (wide angle); 4 m (13.1 ft.)–infinity (telephoto)

Sensitivity Standard output sensitivity equivalent to ISO 100, 200, 400, 800, 1600, 3200*

, 6400*

, 12800*

;

AUTO, AUTO (400), AUTO (800), AUTO (1600)

*1 image size p or q, *2 image size q only

Metering 256-segment through-the-lens (TTL) metering; MULTI, SPOT, AVERAGE

Exposure control Program and 2-stop aperture-priority autoexposure; manual exposure

Exposure compensation

–2 EV – +2 EV in increments of

3 EV (O and P modes)

112

Specifications

System

Scene modes

A (NATURAL AND FLASH LIGHTING), B (NATURAL LIGHT), G (PRO FOCUS MODE),

F (PRO LOW-LIGHT), C (PORTRAIT), V (PORTRAIT ENHANCER), K (LANDSCAPE), L (SPORT),

D (NIGHT), U (NIGHT (TRIPOD)), W (FIREWORKS), E (SUNSET), F (SNOW), G (BEACH),

I (PARTY), O (FLOWER), P (TEXT)

Picture stabilization Optical stabilization (CCD shift)

Intelligent Face Detection Available

Shutter speed (combined

mechanical and electronic

shutter)

• D:

8 s–

1,000 s

• U: 3 s–

1,000 s

• W: 4 s–

2 s

• Manual selection: 8 s–

2,000 s

• Other modes:

4 s–

2,000 s

Continuous

• m: up to 1.8 fps; max. 3 frames • o: up to 1.8 fps; last 3 frames recorded

• S: up to 4.8 fps; max. 12 frames • R: up to 4.8 fps; last 12 frames recorded

Focus • Mode: Center AF, Multi AF, Continuous AF

• Autofocus system: Contrast-detect TTL AF

White balance Automatic scene detection; six manual preset modes for direct sunlight, shade, daylight fluorescent,

warm white fluorescent, cool white fluorescent, and incandescent; custom white balance

Self-timer Off, 2 sec., 10 sec.

Flash Auto flash; effective range when sensitivity is set to ISO 800 is approx. 30 cm–4.2 m/1 ft.–13.8 ft. (wide

angle), 90 cm–2.4 m/3 ft.–7.9 ft. (telephoto)

Flash modes Auto, forced flash, off, slow synchro (red-eye removal off); auto with red-eye removal, forced flash with

red-eye removal, off, slow synchro with red-eye removal (red-eye removal on)

113

Appendix

Specifications

System

Monitor 2.7-in., 230k-dot color LCD monitor

Frame coverage Approx. 100%

Movies Frame size 640 × 480 or 320 × 240 pixels; 30 fps; monaural sound

Shooting options EXR mode (EXR AUTO, RESOLUTION PRIORITY, HIGH ISO & LOW NOISE, D-RANGE PRIORITY),

Dynamic range, Intelligent Face Detection with red-eye removal, power management, framing

guideline, frame number memory, and film simulation

Playback options Intelligent Face Detection, red-eye removal, micro thumbnail, multi-frame playback, sort-by-date,

crop, resize, slide show, image rotation, and voice memo

Other options PictBridge, Exif Print, language selection (Japanese / English / French / German / Spanish / Italian /

Simplified Chinese / Korean / Dutch / Portuguese / Russian / Thai / Turkish / Traditional Chinese /

Czech / Hungarian / Polish / Swedish / Slovak / Danish / Norwegian / Finnish / Arabic), time

difference, silent mode

Input/output terminals

A/V OUT (audio/video output) 8-pin multi-connector for NTSC or PAL output with monaural sound

Digital input/output USB 2.0 High Speed; shares A/V OUT connector

114

Specifications

Power supply/other

Power supply NP-50 rechargeable battery; optional AC power adapter AC-5VX and DC coupler CP-50

Guide to the number of

available frames for battery

operation

Battery Type NP-50 Number of frames Approx. 230 frames

According to the CIPA (Camera & Imaging Products Association) standard procedure for measuring

digital still camera battery consumption (extract):

When using a battery, use the battery supplied with the camera. The storage media should be SD

memory card.

Note that the number of shots that can be taken with a fully-charged battery varies with

temperature and shooting conditions.

Camera dimensions

(W × H × D)

99.3 mm × 58.9 mm × 22.7 mm/3.9 in. × 2.3 in. × 0.9 in.,

excluding projecting parts, measured at the thinnest part

Camera weight Approx. 180 g/6.3 oz., excluding batteries, accessories, and memory cards

Shooting weight Approx. 200 g/7.1 oz., including batteries and memory card

Operating conditions Temperature: 0 °C to +40 °C (+32 °F to +104 °F)

80% humidity or less (no condensation)

115

Appendix

Specifications

NP-50 rechargeable battery

Nominal voltage DC 3.6 V

Nominal capacity 1000 mAh

Operating temperature 0 °C – +40 °C/+32 °F – +104 °F

Dimensions (W × H × D) 35.4 mm × 40.0 mm × 6.6 mm/1.4 in. × 1.6 in. × 0.3 in.

Weight Approx. 18 g/0.6 oz.

BC-45W battery charger

Rated input 100 V–240 V AC, 50/60 Hz

Input capacity 8.0 VA (100 V) 12 VA (240 V)

Rated output 4.2 V DC, 550 mA

Supported batteries NP-50 rechargeable batteries

Charging time Approx. 150 minutes

Dimensions (W × H × D) 91 mm × 62 mm × 23 mm/3.6 in. × 2.4 in. × 0.9 in.

Weight Approx. 67 g/2.4 oz., excluding battery

Operating temperature 0 °C – +40 °C/+32 °F – +104 °F

The weight and dimensions vary with the country or region of sale.

116

Specifications

Color Television Systems

NTSC (National Television System Committee) is a color television telecasting specification adopted mainly in

the U.S.A., Canada, and Japan. PAL (Phase Alternation by Line) is a color television system adopted mainly in

European countries and China.

Notices

• Specifications subject to change without notice. FUJIFILM shall not be held liable for damages resulting from

errors in this manual.

• Although the monitor is manufactured using advanced high-precision technology, small bright points and

anomalous colors (particularly in the vicinity of text) may appear. This is normal for this type of monitor and

does not indicate a malfunction; images recorded with the camera are unaffected.

• Digital cameras may malfunction when exposed to strong radio interference (e.g., electric fields, static

electricity, or line noise).

• Due to the type of lens used, some distortion may occur at the periphery of images. This is normal.

7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN

http://www.fujifilm.com/products/digital_cameras/index.html

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm finepix f70exr in the language / languages: English as an attachment in your email.

The manual is 2,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fujifilm finepix f70exr

Fujifilm finepix f70exr User Manual - German - 125 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fujifilm finepix f70exr Manual

Product: