101547
9
Zoom out
Zoom in
Previous page
1/53
Next page
17
Getting Ready
16
SETTING UP AND USING THE FinePix F700 CRADLE CP-FX700
Just by putting the camera in the cradle, you can ensure that your camera is always charged. The
cradle will also automatically launch the “FinePixViewer” image viewing software when you switch
the cradle on. You can then display thumbnail lists of your photographed images on your computer
for quick and easy downloading.
AC Power
Adapter
Special USB
cable
Connect the AC power adapter, Special A/V cable
or special USB cable to the cradle.
Always use the AC power adapter. Connect the
Special A/V cable and special USB cable as required.
When you are viewing images on a TV, either
disconnect the special USB cable from the cradle to
ensure that the camera is not connected to your
computer, or switch your computer off.
To view images on a TV, use the special A/V cable,
not the special USB cable.
Plug the AC power adapter into a power socket.
AC power adapter
Push the plug firmly all the way into the USB
socket, taking care to plug the correct end of the
cable into the socket.
Always switch the camera off before placing it in
the cradle.
!
Taking care to plug the correct end of the cable into the USB
port, push the plug firmly all the way into the socket.
!
Fit the camera firmly onto the cradle connection terminal.
PC
(USB)socket
Special USB cable
Charging starts when you put a camera containing
battery into the cradle. The camera’s self timer lamp
lights (Red) during charging and goes off when
charging is complete. A fully discharged battery
takes roughly 2 hours to fully recharge (at an
ambient temperature of 23°C±2°C/73.4°F±35.6°F).
!
When you put a camera containing charged battery into the
cradle, the camera’s self timer lamp lights briefly and then
switches off.
Charging the battery
Pressing the power switch on the cradle switches
the camera on. This initiates the connection to the
computer.
See P.83 for details.
!
Install the software first.
Before you connect the cradle to your computer, refer to
section 5 of the Owner’s Manual.
Connecting to a computer
The POWER lamps on the cradle
Cradle (green) Camera (red) Camera Status
Off
Lit
Off Camera switched off, Battery charging complete.
Lit Camera switched off, Battery charging in progress.
Flashing Camera switched on, Exchanging data with the computer.
Off Camera switched on. Standby.
Take the camera out of the cradle
Check that the camera is switched off and then grip
the cradle and take the camera out.
<When viewing images on a TV>
Press the power button to turn the cradle off before
removing the camera.
<If the cradle is connected to a computer>
You must shutdown your computer before removing
the camera from the cradle. See P.87 for details.
Viewing images on a TV
<Special A/V cable>
Plug the audio input connector (white) and video
input connector (yellow) into the matching white and
yellow sockets on the TV.
<Viewing images on a TV>
When you connect the bundled special A/V cable to
the camera and press the POWER switch, the
camera switches on. Switch the TV to video input
mode.
When using the screw in the base to mount the cradle on a tripod, take care to ensure that the
cradle does not fall or tip over.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujifilm Finepix F700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm Finepix F700 in the language / languages: English as an attachment in your email.

The manual is 5,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info