101531
42
Zoom out
Zoom in
Previous page
1/51
Next page
OFF
OFF
83
Viewing Images
6
82
ON
ON
6.4.2
Specifying images for printing without using DPOF (single-frame printing)
5
1Press “a” or “b” to select “u PRINT DPOF”.
2Press the “MENU/OK” button.
!
When d appears, the DPOF settings are not
specified.
!
To use DPOF printing, the DPOF settings must be specified
on FinePix F450 beforehand (P.52).
!
Even when “WITH DATE” is specified in the DPOF settings,
the date is not inserted on printers that do not support date
printing.
01 02
!
Press the “DISP/BACK” button to cancel the printing.
Depending on the printer, the printing may not be canceled
immediately or printing may stop midway through. When
printing stops midway, briefly turn the camera off and then on
again.
6
Press the “MENU/OK” button to download the data
to the printer and print the frames specified in the
DPOF settings.
Press the “DISP/BACK” button to return to step 5.
SET
PICTBRIDGE
PRINT WITH DATE
PRINT WITHOUT DATE
PRINT DPOF
PRINTING
PRINT DPOF
    1/    1SHEETS
CANCEL 
PRINT DPOF OK?
PRINT DPOF
TOTAL/    1SHEETS
YES
CANCEL
SET−UP
1
2
3
4
FRAME NO.       :CONT.
USB MODE
言語言語
/LANG.      :ENGLISH
START−IMAGE     :OFF
SET CANCEL
1Slide the Power switch to the side to turn the
camera on.
2Select “®” in “USB MODE” in the “SET-UP”
menu (P.60).
3Slide the Power switch to the side to turn the
camera off.
!
Do not connect to a PC when the USB mode setting is set to
®”. See P.94 if you connect to PC by mistake.
1
01 03
02
When a printer that supports PictBridge is available, images can be printed by connecting the
camera directly to the PictBridge-compatible printer without using a PC.
!
In PictBridge function, images photographed on other than a camera may not be printed.
6.4.1
Specifying images for printing on the camera
SET−UP
1
2
3
4
FRAME NO.       :CONT.
USB MODE
言語言語
/LANG.      :ENGLISH
START−IMAGE     :OFF
SET CANCEL
2
1Slide the Power switch to the side to turn the
camera on.
2Select “®” in “USB MODE” in the “SET-UP”
menu (P.60).
3Slide the Power switch to the side to turn the
camera off.
!
Do not connect to a PC when the USB mode setting is set to
®”. See P.94 if you connect to a PC by mistake.
1
1Connect the cradle to the printer using the USB
cable.
2Set the camera into the cradle.
4
s ” appears and then the menu is
displayed on the LCD monitor.
!
If the menu does not appear, check whether the USB mode
setting is
®”.
!
Depending on the printer, some functions are disabled.
!
The camera cannot be used to specify printer settings such
as the paper size and print quality.
!
Use an xD-Picture Card that was formatted on the camera.
1Set the “USB/PLAY” switch on the cradle to the
“USB” position.
2Press the “POWER” button on the cradle.
3
01
02
01 03
02
USB
CHECKING USB
6.4
CONNECTING THE CAMERA DIRECTLY TO THE PRINTER —
PictBridge FUNCTION
Continued
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujifilm Finepix F450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm Finepix F450 in the language / languages: English as an attachment in your email.

The manual is 4,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info