101523
41
Zoom out
Zoom in
Previous page
1/57
Next page
6
8180
g POWER SAVE
SET–UP
If the power cuts out during data transmission, the data cannot be transmitted correctly. Always use the
AC power adapter when connecting the camera to a computer.
When the camera is in sleep mode, pressing the
shutter button down halfway brings the camera
back to full operational mode. This is a useful
feature as it allows you to take pictures more
quickly than switching the camera off and then
on again. You can also take a picture by pressing
the shutter button all the way down.
!
Operation can also be restored by pressing buttons
other than the shutter button.
SETーUPSETーUP
USB MODEUSB MODE
DSCDSC
POWER SAVEPOWER SAVE
2 MIN2 MIN
DATE/TIMEDATE/TIME
POSTVIEWPOSTVIEW ONON
SETSET
OKOK BACKBACK
To restore power to the camera
Use the power switch to
turn the camera off briefly
1 and then on again 2.
Once you enable this function, the monitor is
temporarily switched off to reduce power
consumption (Sleep mode) if the camera is not
used for about 30 seconds. If the camera is then
left unused for a further time (2 minutes or 5
minutes), it is automatically switched off. Use
this function when you want to get the maximum
possible running time from the battery.
!
Power Save is disabled when the camera is connected
to a USB port.
The Sleep function does not operate when the
LCD monitor is switched off or when the camera
is in Setup or Playback mode. However, if the
camera controls are not used for some time (2
minutes or 5 minutes), the camera automatically
switches off.
IN CONNECTION
6
Connection
DSC
(
Mass storage device
)
Mode
The Connection section explains how to connect the camera to your computer using the special USB
cable and describes the functions you can use once the camera and computer are connected. Refer
also to the Software Quick Start Guide booklet.
This mode provides a simple way to read
images from a SmartMedia and store images on
to a SmartMedia (P.82).
You must install all the software before
connecting the camera to your computer.
Refer also to the Software Quick Start Guide
booklet.
The first time you connect the camera to your computer
PC CAM
(
camera
)
Mode
This function allows you to conduct
videoconferencing sessions between PCs
connected to the Internet. This function can also
be used to record video on a PC (P.84).
!
Videoconferencing (PictureHello) is not
supported on Macintosh computers.
!
The PC Camera function cannot be used on Mac OS
X (including the Classic environment). Use a Mac
OS version between 8.6 and 9.2.
Software Quick Start Guide
CD-ROM
(Software for FinePix EX)
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujifilm Finepix F401 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm Finepix F401 in the language / languages: English as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info