101523

Fujifilm Finepix F401 Manual

16
Zoom out
Zoom in
Previous page
1/57
Next page
30
USING THE ZOOM
q
/
T
MODE
2
31
e MACRO
(
CLOSE-UP
)
PHOTOGRAPHY
q
MODE
Optical
zoom
Digital
zoom
Zoom bar display
You can operate the optical zoom using the zoom
buttons. You can also use the digital zoom when
the resolution setting is “2”, “1”, “!” or “MOVIE”
(# or $). However, this only applies when you
are using the LCD monitor to take pictures.
h
Digital zoom focal distance (35mm camera equivalent)
2: A
pprox. 114 mm to 164 mm
Maximum zoom scale: 1.44×
1: Approx. 114 mm
to
205 mm
Maximum zoom scale:
1.8×
!: Approx. 114 mm
to
410 mm
Maximum zoom scale:
3.6×
#: Approx. 38 mm
to
137 mm
Maximum zoom scale:
3.6×
$: Approx. 38 mm
to
274 mm
Maximum zoom scale:
7.2×
●
!
You cannot use the digital zoom for resolutions of “3”.
●
!
The digital zoom cannot be used in high-sensitivity
photography (f800, 1600).
●
!
See P.44, 55 for information on changing the file size
setting.
●
!
If the image goes out of focus when you use the
zoom, press the shutter button down halfway to
refocus.
●
!
The optical zoom is equivalent to approximately
38 mm-114 mm on a 35 mm camera.
The position of the “■ ” on the zoom bar indicates
the current zoom setting.
hIf the “
■ ” is above the dividing line, the digital
zoom is being used. If it is below the line, the
optical zoom is being used,
hPress “P(a)” or “{(b)” to move the “■ ”.
hWhen you switch between digital zoom and
optical zoom, the “■ ” stops moving. Press the
button for the same direction again to start the
“■ ” moving again.
４９４９
Selecting Macro mode allows you to take close-
up shots.
●
Effective Photography Range:
Approx. 10 cm to 80 cm (3.9 in to 31.5 in.).
●
!
The LCD monitor automatically switches on.
●
!
You cannot switch the LCD monitor off.
●
!
When you cancel Macro mode, the LCD monitor
remains on.
1 Set the Mode switch to “q”.
2 Press the “e” Macro button (d). The “e” icon
appears on the LCD monitor indicating that you
can take close-up shots.
To cancel Macro mode, press the “e” Macro
button (d) again.
●
!
Macro photography is automatically cancelled in the
following situations:
• When you have switched photography modes.
• When the camera is switched off.
●
!
When you set the mode, the “e” icon is briefly
displayed larger.
●
!
To fire the flash, press “c” and select “z” Forced
Flash or “
v” Slow Synchro (➡P.33, 34). However, in
some cases the correct brightness (exposure) may
not be obtained.
●
!
If you are shooting in a dark location (when the “\”
camera shake warning icon is displayed), use a tripod
to prevent camera shake.
If you use the viewfinder to take a picture in Macro
mode, the field visible through the viewfinder does
not match the field actually photographed because
the viewfinder and lens are in different positions.
Accordingly, you should use the LCD monitor to
take pictures in Macro mode.
01 02
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujifilm Finepix F401 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm Finepix F401 in the language / languages: English as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info