101509
49
Zoom out
Zoom in
Previous page
1/61
Next page
97
Viewing Images
6
96
6.2.2 Specifying images for printing without using DPOF
(
single-frame printing
)
1Press the “w” button for about 1 second to turn
the camera on in Playback mode.
2Select “®” PICTBRIDGE in “ò” USB MODE
in the “˜” SET-UP menu (P.81).
3Press the “POWER” button to turn the camera
off.
!
Do not connect to a PC when the “ò” USB MODE setting is
set to “
®” PICTBRIDGE. See P.113 if you connect to a PC
by mistake.
1
Terminal
adapter
4
1Plug the terminal adapter into the terminal
adapter connection socket on the camera.
2Turn the printer on.
!
The camera cannot be used to specify printer settings such
as the paper size and print quality.
!
Use an xD-Picture Card that was formatted on the camera.
2
1Plug the USB cable (mini-B) into the USB socket
of the terminal adapter.
2Connect the terminal adapter to your printer
using the USB cable (mini-B).
5
Press the “w” button for about 1 second to turn the
camera on in Playback mode.
“CHECKING USB” appears and then the menu is
displayed on the LCD monitor.
!
If the menu does not appear, check whether the “ò” USB
MODE setting is
® PICTBRIDGE.
!
Depending on the printer, some functions are disabled.
CHECC H E C KIK I NGN G USU S B
PI
P I CTBC T B R I DGED G E
3
01 02
1Plug the AC power adapter connector into “DC
IN 5V” socket of the terminal adapter.
2Plug the AC power adapter into the power outlet.
SETS E T
SETS E T
ENGLISHE N G L I S H
SETS E T
NTSCN T S C
PICTBRIDGEP I C T B R I D G E
:
1
4
3
2
01
02
03
6
1Press “a” or “b” to select “u PRINT DPOF”.
2Press the “MENU/OK” button.
!
When [u NOT SET DPOF] appears, the DPOF settings are
not specified.
!
To use DPOF printing, the DPOF settings must be specified
on FinePix F10 beforehand (P.60).
!
Even when “WITH DATE” is specified in the DPOF settings,
the date is not inserted on printers that do not support date
printing.
PP I CTC T B RIR I D GEG E
PRP R I NTN T W I THT H DATED A T E
PRP R I NTN T W I T H OUTO U T DATED A T E
PRP R I NTN T DPOFD P O F
OKO K
01 02
6.2 CONNECTING THE CAMERA DIRECTLY TO THE PRINTER
— PictBridge FUNCTION
5
Press the “w” button for about 1 second to turn the
camera on in Playback mode.
“CHECKING USB” appears and then the menu is
displayed on the LCD monitor.
!
If the menu does not appear, check whether the “ò” USB
MODE setting is
® PICTBRIDGE.
!
Depending on the printer, some functions are disabled.
CHECC H E C KIK I NGN G USU S B
PI
P I CTBC T B R I DGED G E
7
Press the “MENU/OK” button to download the data
to the printer and print the frames specified in the
DPOF settings.
SHEETSS H E E T S
P R I N T INGI N G
CANCELC A N C E L
111191 91 919
!
Press the “DISP/BACK” button to cancel the printing.
Depending on the printer, the printing may not be canceled
immediately or printing may stop midway through. When
printing stops midway, briefly turn the camera off and then on
again.
Continued
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujifilm Finepix F10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm Finepix F10 in the language / languages: English as an attachment in your email.

The manual is 6,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info