101509
26
Zoom out
Zoom in
Previous page
1/61
Next page
51
Advanced Features
3
50
1
2
AUTOA U T OA U T OAUTO
SETS E T
OFFO F FO F FOFF
0
AUTOA U T OA U T OAUTO
CUSTOMC U S T O M
1
01
02
Use this setting to set the white balance for the
ambient natural or artificial lighting in images. Use
this setting to achieve special effects also.
1Select “” custom white balance.
2Press the “MENU/OK” button.
Custom white balance
Beep
CUSTOMC U S T O M WBW B
NOTN O T CHANGEC H A N G E
NEWN E W WBW B
CANCELC A N C E L
2
Hold a piece of white paper under the light source
for setting the white balance, so that it fills entire
the LCD monitor. Then press the shutter button to
set the white balance.
!
The white balance setting does not affect the image shown
on the LCD monitor.
To use the white balance set previously, press the
“MENU/OK” button without pressing the shutter
button.
3
When the correct exposure is measured,
“COMPLETED !” appears.
Press the “MENU/OK” button to confirm the setting.
!
The specified custom white balance is retained until it is
reset. This setting is retained even if the battery is removed.
!
After taking the picture, check the color (white balance)
setting for the image.
When [OVER] or [UNDER] appears, the white
balance was not measured at the correct exposure.
Set the exposure compensation again, using a
negative value (–) when [OVER] appears and a
positive value (+) when [UNDER] appears.
COMPLETED! C O M P L E T E D ! C O M P L E T E D ! COMPLETED!
SET
S E T CANCELC A N C E L
OVERO V E RO V E ROVER
NNN
11110000
OVERO V E R
or
UNDERU N D E R
Example
You can change the white balance for a photographed image by using colored paper instead of white
paper.
ˆ
PHOTOMETRY
Available Photography mode: s
Use this mode for scenes where the brightness of
the subject and background differ markedly so that
the MULTI setting is unlikely to achieve the desired
results.
MULTI (Pattern): Light metering where the
camera assesses the scene
and selects the correct
exposure.
SPOT: Light metering where the exposure is
optimized for the center of the image.
AVERAGE: Light metering where an average
value for the entire image is used.
!
In the “B”, “?” and “r” modes, light metering is fixed at
the MULTI setting and cannot be changed.
PHOTOMETRYP H O T O M E T R Y
:
AUTOA U T OA U T OAUTO
SETS E T
OFFO F FO F FOFF
0
1
2
The photometry modes are effective for the following subjects
h MULTI
In this mode, the camera uses automatic scene recognition to analyze the subject and provide
optimum exposure in a wide range of shooting conditions. This mode should be used for everyday
photography.
h SPOT
This mode is useful for subjects with strongly contrasting light and dark areas where you want to
achieve the correct exposure for a particular feature.
h AVERAGE
The advantage of this mode is that the exposure tends not to change for different compositions or
subjects. This mode is particularly effective for shots of people wearing black or white clothing and
shots of scenery.
AUTO: Automatic adjustment
(shooting to show the ambience of
the light source)
: Custom white balance
6: Shooting outdoors in good weather
7: Shooting in shade
9: Shooting under “Daylight” fluorescent
lamps
0: Shooting under “Warm White” fluorescent
lamps
-: Shooting under “Cool White” fluorescent
lamps
8: Shooting in incandescent light
When the flash fires, the white balance setting (excluding custom white balance) for the flash is used. Consequently,
to achieve a particular effect, the flash mode should be set to Suppressed flash (P.38).
!
The color tones may vary depending on the shooting conditions (light source, etc.).
Change the white balance setting to take a picture
with the white balance fixed for the surroundings
and lighting.
In AUTO mode, the correct white balance may not
be achieved for subjects such as close-ups of
people’s faces and pictures taken under a special
light source. Select the correct white balance for
the light source. See P.117 for more information on
the white balance.
11
2
AUTOA U T OA U T OAUTO
AUTOA U T OA U T OAUTO
SETS E T
OFFO F FO F FOFF
00
W H I T E BAB A LLL L ANCEA N C E
»
WHITE BALANCE
(
SELECTING THE LIGHT SOURCE
)
Available Photography mode: s
PHOTOGRAPHY MENU
PHOTOGRAPHY MENU
Displaying the menus (P.45)
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujifilm Finepix F10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm Finepix F10 in the language / languages: English as an attachment in your email.

The manual is 6,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info