101503
35
Zoom out
Zoom in
Previous page
1/47
Next page
69
Viewing Images
68
Check that the camera is turned off. Plug the AC
power adapter connector into the “DC IN 3V”
socket and then plug the AC power adapter into the
power outlet.
!
The socket-outlet shall be installed near the equipment and
shall be easily accessible.
!
The shape of the plug and socket-outlet depends on the
country of use.
!
See P.80 for notes on using the AC power adapter.
DC IN 3V
socket
Always use a FUJIFILM AC Power Adapter AC-3V/AC-3VW.
Use the AC power adapter to avoid losing power at inconvenient times, such as when downloading
photographed images to the computer. Using the AC power adapter also allows you to take pictures
and play back images without worrying about depleting the batteries.
!
By using the optional cradle, the AC power adapter bundled with the cradle must be used. The use of AC power adapters
other than the bundled product will cause faults.
!
Only connect or disconnect the AC power adapter when the camera is turned off.
Connecting or disconnecting the AC power adapter while the camera is turned on temporarily interrupts the power supply
to the camera, so that images or movies being shot at the time are not recorded. Failing to turn the camera off first can
also result in damage to the xD-Picture Card or malfunctions during PC connection.
6.1 CAMERA CONNECTION
6
Viewing Images
6.1.1 Using the AC power adapter
(
sold separately
)
5.4 INSTALLATION ON A Mac OS X
9
Click the [Continue] button.
!
The software is installed in the “Applications” folder on the installation destination disk.
10
Click the [Install (upgrade)] button.
11
Enter your administrator name and password and then click the [OK] button.
12
An installation progress window appears. (Installation may take several minutes)
14
Launch “Image Capture” from the “Applications” folder.
13
When you have completed the installation, click the
[Restart] button.
15
Change the ImageCapture settings.
(OS X 10.1.5)
(1) Select “Other...” from “Hot plug Action”.
(OS X 10.2 or later)
(1) Select “Preferenes...” from the “Image Capture”
menu.
(2) Select “Other...” from “When a camera is
connected, open”.
16
Select “FPVBridge” from “FinePixViewer” folder in
the “Applications” folder and click the “Open” button.
17
Quit ImageCapture.
Trun off the camera and TV. Plug the included A/V
cable (provided with the camera) into the “A/V
OUT” (audio/visual output) socket.
Plug the other end of the cable into the video input
socket on the TV. Then turn the camera and TV on
and play back images as you would normally.
!
If there is a power outlet available, recommend for using AC-
Power Adapter AC-3V (optional).
!
Refer to the instructions provided with your TV for more
information on video input for your TV.
6.1.2 Connecting to a TV
DC IN 3V
socket
Socket
1
2
Video(yellow)
Audio(white)
To terminals
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujifilm Finepix F 420 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm Finepix F 420 in the language / languages: English as an attachment in your email.

The manual is 2,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info