Manual Fujifilm Finepix F 410 (page 10 of 69) (English)

101501

Zoom out

Zoom in

1/69

◆

Checking the remaining battery charge

◆

●

The above estimates are for the still photography modes. In Playback mode, the transition from “X” to “C” may

take less time.

●

When the battery runs flat, the “C” is displayed and the camera automatically stops operating. When this occurs, the

camera may continue operating if you switch it back on even if you haven’t loaded a new or fully charged battery.

However, this may cause malfunctions that could lead to camera damage, such as the camera shutting down without

retracting the lens. Always load a new or fully charged battery.

●

Due to the nature of the battery, the battery low warning may appear early when the camera is used in cold locations.

This is normal and does not indicate a fault. We recommend that you warm the battery in your pocket or a similar

location before use.

SETTING THE DATE AND TIME

Changing the date and time To change the date display format

1 Press the “MENU/OK” button.

2 Press “d” or “c” to select “g” OPTION and

then press “a” or “b” to select “SET

–

UP”.

3 Press the “MENU/OK” button.

4 Press “a” or “b” to select “DATE/TIME”.

5 Press “c”.

See P.16 for information on setting the date and

time.

0103 020405

01 02

1 Press “d” or “c” to select the date format.

2 Press “a” or “b” to set the format. Refer to

the table below for details of the settings.

Setting Explanation

YYYY.MM.DD Displays the date in the “year.month. day” format.

MM/DD/YYYY Displays the date in the “month/day/ year” format.

DD.MM.YYYY Displays the date in the “day.month. year” format.

◆

Power Save Function

◆

If the camera is not used in any way for approx. 30 seconds when the camera functions are enabled, this

function temporarily switches features such as the LCD monitor off to reduce power consumption

(

➡P.84

)

. If the camera is then left unused for a further period

(

2 minutes or 5 minutes

)

, the Power Save

function automatically switches the camera off. To switch the camera back on, slide the Power switch to

the side to turn the camera off briefly and then turn it back on.

1 There is ample remaining battery charge.

(

Displayed for only 3 seconds when the camera is switched on or

the mode is changed.

)

2 The battery is approximately half charged.

(

Displayed for only 3 seconds when the camera is switched on or

the mode is changed.

)

3 Battery charge low. Replace or recharge the battery as it will run

out shortly.

4 The battery is exhausted. The display will shortly go blank and the

camera will stop working. Replace or recharge the battery.

Blinking red

Lit white

Lit red

Lit white

Switch the camera on and check that no battery level warning

(

Z, X or C

)

is displayed on the LCD

monitor. If the “

º” is displayed, the battery is fully charged.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm Finepix F 410 in the language / languages: English as an attachment in your email.

The manual is 2,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fujifilm Finepix F 410 Manual

Product: