101495
42
Zoom out
Zoom in
Previous page
1/57
Next page
6
8382
CONNECTING AT DSC MODE
Camera Operation PC Operation
(USB)
socket
DC IN
5V socket
Camera
USB
socket
PC
OFF
ON
1
01 04
2
SETーUPSETーUP
USB MODEUSB MODE
DSCDSC
POWER SAVEPOWER SAVE
2 MIN2 MIN
DATE/TIMEDATE/TIME
POSTVIEWPOSTVIEW ONON
SETSET
OKOK BACKBACK
03
02
1 Load a SmartMedia containing photographed
images into your camera. Plug the AC power
adapter connector into the DC IN 5V socket
on the camera and then plug the adapter
itself into the main power outlet.
2 Slide the POWER switch to the side to turn
the camera on.
3Set the USB MODE setting in the SETUP
menu to DSC (P.78, 79).
4 Slide the POWER switch to the side to turn
the camera off.
1 Switch your PC on.
2 Use the special FinePix F401 USB cable to
connect the camera to your computer.
3 Switch the camera on.
Always use the prescribed procedure when
disconnecting or switching off the camera (P.86).
If you are using a Windows PC, the driver settings
are specified automatically when installation is
completed. No further action is required.
If your PC fails to recognize the camera, refer to
the Software Quick Start Guide.
!
On Windows XP and Mac OS X, you must specify the
automatic launch settings the first time you connect the
camera to your computer (Software Quick Start Guide
booklet).
!
Take care to ensure that the special FinePix F401 USB
cable is connected the correct way around and that the
plugs are pushed fully into the connection sockets.
!
Before replacing the SmartMedia, always disconnect
the camera from the PC using the procedure on
P.86.
!
Do not disconnect the USB cable when the camera
is communicating with the PC. See P.86 for
information on the disconnection procedure.
i When the camera and computer are exchanging
data, the self timer lamp flashes and the
viewfinder lamp flashes alternately green and
orange.
i DSC appears on the LCD monitor.
i Power Save is disabled when the camera is
connected to a USB port.
i FinePixViewer automatically starts up.
i A removable disk icon appears and you can
use your PC to transfer files to and from the
camera.
Windows Macintosh
Screen for Windows 98 SE
If the above operations do not occur, you do not
have the required software programs or drivers
installed on your PC. Refer to the Software
Quick Start Guide booklet and complete the
required PC setup procedures. Then reconnect
the camera to your PC.
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujifilm Finepix F 401 ZOOM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm Finepix F 401 ZOOM in the language / languages: English as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info