101495

Fujifilm Finepix F 401 ZOOM Manual

9
Zoom out
Zoom in
Previous page
1/57
Next page
1
1716
SWITCHING ON AND OFF
•
SETTING THE DATE AND TIME
ＤＡＴＥ／ＴＩＭＥＤＡＴＥ／ＴＩＭＥ
２００２２００２ ．   １  ．   １．   １  ．   １
１２  ：  ００    ＡＭ  １２  ：  ００    ＡＭ  
ＯＫＯＫ ＢＡＣＫＢＡＣＫ
ＤＡＴＥ／ＴＩＭＥＤＡＴＥ／ＴＩＭＥ
０４  ：  ２２０４  ：  ２２ ＡＭＡＭ
２００２２００２ ．   ．   ４  ．    ．  ２２２２
ＯＫＯＫ ＢＡＣＫＢＡＣＫ
3 4
01 02
Changing the date and time
To change the date and time:
1 Press the “MENU/OK” button.
2 Use “d” or “c” to select “g” OPTION and then
use “P(a)” or “{(b)” to select “SET–UP”.
3 Press the “MENU/OK” button.
4 Select “DATE/TIME” and press “c”.
See P.16 for information on setting the date and
time.
ＳＥＴ−ＵＰＳＥＴ−ＵＰ
ＵＳＢ ＭＯＤＥＵＳＢ ＭＯＤＥ
ＤＳＣＤＳＣ
ＰＯＷＥＲ ＳＡＶＥＰＯＷＥＲ ＳＡＶＥ
２ ＭＩＮ２ ＭＩＮ
ＤＡＴＥ／ＴＩＭＥＤＡＴＥ／ＴＩＭＥ
P O S T V I E WP O S T V I E W ＯＮＯＮ
ＳＥＴＳＥＴ
ＯＫＯＫ ＢＡＣＫＢＡＣＫ
0103 0204
●
!
To set the time, press the “MENU/OK” button when the time
is at zero seconds.
●
!
If at least 2 hours have passed since the AC power
adapter was connected or the battery inserted and the
date and time set, then those settings will be maintained
for roughly 5 hours even when the camera has no power
supply (when the AC power adapter is disconnected and
the battery is removed).
1 Use “d” and “c” to select Year, Month, Day,
Hour or Minute.
2 Press “P(a)” or “{(b)” to set the number.
Once you have set the date and time, press the
“MENU/OK” button. Pressing the “MENU/OK”
button switches the camera to Photography or
Playback mode.
●
!
If you hold down “a(P)” or “b({)”, the numbers
change continuously.
●
!
When the time displayed passes “12:00”, the AM/PM
setting automatically switches.
◆
Power Save Function
◆
If the camera is not used in any way for approx. 30
seconds when the camera functions are enabled, this
function temporarily switches features such as the LCD
monitor off to reduce power consumption (➡P.80). If
the camera is then left unused for a further period (2
minutes or 5 minutes), the Power Save function
automatically switches the camera off. To switch the
camera back on, slide the Power switch to the side to
turn the camera off briefly and then turn it back on.
◆
Checking the remaining battery charge
◆
Switch the camera on and check that no battery
level warning (
Z, X or C) is displayed on
the LCD monitor. If no icon is displayed, there is
ample charge left in the battery.
i
Z Lit white:
The battery is approximately half charged.
i
X Lit red:
Battery charge low. Replace or recharge the
battery as it will run out shortly.
i
C Blinking red:
The battery is exhausted. The display will shortly
go blank and the camera will stop working.
Replace or recharge the battery.
●
!
The above estimates are for the photography modes.
In Playback mode, the transition from “
Z” to “C”
may take less time.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujifilm Finepix F 401 ZOOM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm Finepix F 401 ZOOM in the language / languages: English as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info