101491
26
Zoom out
Zoom in
Previous page
1/63
Next page
51
Advanced Features
3
50
PHOTOGRAPHY MENU
PHOTOGRAPHY MENU
WBWB
AUTOAUTO
1
01
02
2
Hold a piece of white paper under the light source
for setting the white balance, so that it fills the LCD
monitor. Then press the shutter button to set the
white balance.
!
The white balance setting does not affect the image shown
on the LCD monitor.
Beep
AUTO: Automatic adjustment
(shooting to show the ambience of
the light source)
I: Custom white balance
6: Shooting outdoors in good weather
7: Shooting in shade
9: Shooting under “Daylight” fluorescent
lamps
0: Shooting under “Warm White”
fluorescent lamps
-: Shooting under “Cool White”
fluorescent lamps
8: Shooting in incandescent light
When the flash fires, the white balance setting (excluding custom white balance) for the flash is used. Consequently,
to achieve a particular effect, the flash mode should be set to Suppressed flash (P.42).
!
The color tones may vary depending on the shooting conditions (light source, etc.).
Change the white balance setting to take a picture
with the white balance fixed for the surroundings
and lighting.
In AUTO mode, the correct white balance may not
be achieved for subjects such as close-ups of
people’s faces and pictures taken under a special
light source. Select the correct white balance for
the light source. See P.119 for more information on
the white balance.
WBWB
AUTOAUTO
A
WHITE BALANCE
Available Photography mode:
Use this setting to set the white balance for the
ambient natural or artificial lighting in images. Use
this setting to achieve special effects also.
1Select “I” custom white balance.
2Press the “MENU/OK” button.
Custom white balance
To use the white balance set previously, press the
“MENU/OK” button without pressing the shutter
button.
CUSTOM WBCUSTOM WB
NOT CHANGEOT CHANGE
NEW WBNEW WB
CANCELCANCEL
3
When the correct exposure is measured,
p” appears.
Press the “MENU/OK” button to confirm the setting.
!
The specified custom white balance is retained until it is
reset. This setting is retained even if the battery is removed.
!
After taking the picture, check the “Color (White Balance)”
setting for the image.
i Set “IMAGE DISP.” to “PREVIEW” in the “SET-UP” screen
(P.81).
i Set the Mode switch to “
w” (P.27).
When “y ” or “u ” appears, the white
balance was not measured at the correct exposure.
Set the exposure compensation again, using a
negative value (–) when “y” appears and a
positive value (+) when “u” appears.
COMPLETEDCOMPLETED ! !
SETSET CANCELCANCEL
ISO 80ISO 80
oror
OVEROVER
OVEROVER
UNDERUNDER
1010
−−−−−−−− F−−−F−−−
Example
You can change the white balance for a photographed image by using colored paper instead of white
paper.
Displaying the menus (P.48)
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujifilm Finepix E550 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm Finepix E550 in the language / languages: English as an attachment in your email.

The manual is 6,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info