510409
78
Zoom out
Zoom in
Previous page
1/88
Next page
78
Warning Displays eThe table below lists the warnings that are displayed on the LCD monitor.
(Lit red)
(Blinking red)
The batteries in the camera are fully
depleted or very low on charge.
Load new or fully charged batteries.
|
There is a strong likelihood of camera
shake because the shutter speed is
slow.
Use flash photography. However, use a
tripod for some scenes and modes.
Outside the AE continuous range. The picture can be taken, but the correct
brighthess (exposure) will not be obtained.
The AF (auto focus) cannot work
effectively.
i If the image is too dark, take the picture at
a distance of around 2 m (6.6 ft.) from the
subject.
i Use AF lock to take the picture.
No xD-Picture Card is inserted. Insert an xD-Picture Card.
i The xD-Picture Card is not
formatted.
i The xD-Picture Card contact area
is soiled.
i Camera fault.
i Format the xD-Picture Card in the
camera.
i Wipe the contact area on the xD-Picture
Card with a soft dry cloth. It may be
necessary to format the xD-Picture Card.
If the error message is still displayed,
replace the xD-Picture Card.
i Contact your FUJIFILM dealer.
The xD-Picture Card is fully
recorded.
Erase some images or use an xD-Picture
Card that has ample free space.
i The file played back was not
recorded correctly.
i The xD-Picture Card contact area
is soiled.
i Camera fault.
i You attempted to play a movie that
was not recorded on this camera.
i Images cannot be played back.
i Wipe the contact area on the xD-Picture
Card with a soft dry cloth. It may be
necessary to format the xD-Picture Card.
If the error message is still displayed,
replace the xD-Picture Card.
i Contact your FUJIFILM dealer.
i Movies cannot be played back.
The frame number has reached
999–9999.
1 Insert a formatted xD-Picture Card into
the camera.
2 Set “RENEW” as the FRAME NO.
setting in the SET-UP menu.
3 Start taking pictures. (The frame
numbers start from “100-0001”.)
4 Set “CONT.” as the FRAME NO. setting
in the SET-UP menu.
Warning Displayed Explanation Remedy
i The xD-Picture Card contact area
is soiled.
i The xD-Picture Card is damaged.
i The xD-Picture Card format is
incorrect.
i Camera fault.
i Wipe the contact area on the xD-Picture
Card with a soft dry cloth. It may be
necessary to format the xD-Picture Card.
If the error message is still displayed,
replace the xD-Picture Card.
i Contact your FUJIFILM dealer.
i The data could not be recorded due
to an xD-Picture Card error or a
connection error between the xD-
Picture Card and camera.
i The image cannot be recorded as it
is too large to fit in the available
space on the xD-Picture Card.
i Re-insert the xD-Picture Card or turn the
camera off and then on again. If the error
message is still displayed, contact your
FUJIFILM dealer.
i Use a new xD-Picture Card.
A protected file was encountered. Protected files cannot be erased. Remove
the protection.
Downloaded from www.Manualslib.com manuals search engine
78


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujifilm Finepix A607 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm Finepix A607 in the language / languages: English as an attachment in your email.

The manual is 3,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info