287610
26
Zoom out
Zoom in
Previous page
1/43
Next page
51
Settings
50
Power consumption is kept to a minimum to
prevent battery depletion. You should select the
“ON” setting when you are using alkaline batteries.
h Power saving OFF
Batteries are more likely to run flat since no power
reduction measures (sleep mode, etc.) are used.
However, this function automatically switches the
camera off if the camera is not used for
approximately 2 minutes.
h Power saving ON
1If the camera is not used for approximately 30
seconds, the LCD monitor switches off
temporarily to reduce power consumption (The
viewfinder lamp (green) flashes at 1-second
intervals).
Pressing the shutter button down halfway at this
point restores the camera to the ready-to-shoot
status.
2If the camera is left unused for 90 seconds after
the LCD monitor switches off, the camera is
automatically switched off (the viewfinder lamp
switches off).
!
The charging time for the flash increases slightly because the
flash charging power is reduced.
!
If you press the shutter button down halfway and then release
it, the screen may go dark briefly because the flash is
charging.
POWER SAVE SETTING
When the camera has switched off
You can switch the camera back on by briefly
switching the camera off 1 and then switching it
back on again 2.
If the camera is left unused for about 2 minutes in
Playback mode, during setup or while the LCD
monitor is switched off, the camera is automatically
switched off. However, the LCD monitor does not
switch off if the camera is left unused for 30
seconds.
01
02
!
The POWER SAVE setting is disabled during automatic
playback, during rechargeable battery discharging and when
a USB connection is being used.
1Press the “MENU/OK” button to display the
menu screen.
2Press “d” or “c” to select “F” OPTION and
then press “a” or “b” to select “SET–UP”.
3Press the “MENU/OK” button to display the
SET–UP screen.
4Press “a” or “b” to select a menu option and
then press “d” or “c” to change the setting.
Press “c ” for “FORMAT”, “DATE/TIME” or
qRESET”.
5After you have modified the settings, press the
“MENU/OK” button to confirm the changes.
SET–UP
F USING THE SETUP SCREEN
!
Always switch the camera off when replacing the batteries. If
you open the battery cover or disconnect the AC power
adapter without switching the camera off, the camera settings
may revert to the factory default values set at shipment.
SETUP Menu Options
01
02
03
0504
IMAGE DISP. ON/OFF ON
This option specifies whether or not an image checking screen
(photography results) is displayed after you take a shot.
The photographed image is displayed for a few moments and
then automatically recorded.
POWER SAVE ON/OFF ON
This option allows you to specify whether the LCD monitor
switches off to conserve power if the camera is not used for 30
seconds. See P.51 for details.
FORMAT OK Erases all files. See P.52 for details.
§ BEEP
LOW/HIGH/OFF LOW
Sets the volume of the tone emitted when the camera controls
are used.
DATE/TIME SET Use this option to correct the date or time. See P.15 for details.
qLCD
ON/OFF ON
Use this option to specify whether the LCD monitor is
automatically switched ON or OFF when the Mode dial is set to
q
”.
FRAME NO. CONT./RENEW CONT.
Specifies whether frame numbers are assigned consecutively
from previous numbers or begin again. See P.52 for details.
USB MODE
/qPC
Selects the function when the camera is connected to a PC.
See P.62 for details.
ENGLISH
Select English, French or German as the language used for
screen display.
VIDEO SYSTEM NTSC/PAL Specifies whether video output is set to NTSC or PAL.
qRESET
OK
Resets all the camera settings other than the date and time,
frame number, language and video output settings to the factory
default values set at shipment. Pressing “c ” displays a
confirmation screen. To reset the settings, press the “MENU/OK”
button.
DISCHARGE OK Discharges rechargeable batteries. See P.11 for details.
Settings Display
Default setting
Explanation
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujifilm finepix a310 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm finepix a310 in the language / languages: English as an attachment in your email.

The manual is 3,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info