101431
9
Zoom out
Zoom in
Previous page
1/64
Next page
16 17
1
To change the date display format
Power Save Function
If the camera is not used for 2 minutes, this
function automatically switches it off.
When this function is enabled, the LCD monitor
switches off to conserve battery power if the
camera is not used in any way for 30 seconds
(See P.70 for details).
Checking the remaining battery charge
Switch the camera on and check that no battery
level warning (
Z or X) is displayed on the
LCD monitor. If no icon indicating the remaining
battery charge is displayed, the battery has
ample charge.
i
Z Lit red:
Battery charge low. Replace or recharge the
battery as it will run out shortly.
i
X Blinking red:
The battery is exhausted. The display will shortly
go blank and the camera will stop working.
Replace or recharge the battery.
!
The above estimates are for the Still photography
modes. In Playback mode, the transition from “
Z
to “
X” may take less time.
 1/ 1/2002 1/ 1/2002
DATE/TIMEDATE/TIME
MM/DD/YYYYMM/DD/YYYY
12:0012:00 AMAM
OKOK OKOK
BACKBACK
01 02
1 Press “d” or “c” to select the date format.
2 Press “a” or “b” to set the format. Refer to
the table below for details of the settings.
Displays the date in the “month/day/ year” format.
MM/DD/YYYY
Displays the date in the “day.month. year” format.
DD.MM.YYYY
YYYY.MM.DD
Explanation
Setting
Displays the date in the “year.month. day” format.
2002 10 292002 10 29
DATE/TIMEDATE/TIME
YYYY MM DDYYYY MM DD
 8  8 4040 AMAM
OKOK OKOK
BACKBACK
Once you have set the date and time, press the
“MENU/OK” button. Pressing the “MENU/OK”
button switches the camera to still photography
or Playback mode.
!
You cannot set the seconds, but you can set the time
more accurately by pressing the “MENU/OK” button
when the time on your reference clock is at zero
seconds.
!
If the camera is left for 30 minutes or longer with the
batteries removed and the AC power adapter
disconnected, the date and time settings may revert to
the factory default settings. If this occurs, reset the date
and time.
3
POWER SAVEPOWER SAVE
DATE/TIMEDATE/TIME
USB MODEUSB MODE
ONON
POSTVIEW
ONON
SETSET
DSCDSC
SET−UPSET−UP
OKOK
BACKBACK
Changing the date and time
To change the date and time:
1 Press the “MENU/OK” button.
2 Use “d” or “c” to select “g” OPTION and
then use “a” or “b” to select “SET–UP”.
3 Press the “MENU/OK” button.
4 Select “DATE/TIME” and press “c”.
See P.15 for information on setting the date and
time.
0103 0204
SETTING THE DATE AND TIME
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujifilm Finepix A 204 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm Finepix A 204 in the language / languages: English as an attachment in your email.

The manual is 2,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info