3
5352
1Press the “MENU/OK” button to start
recording the voice caption.
2During voice captioning, the remaining time is
shown on the LCD monitor and the self-timer
lamp blinks.
3When the time remaining reaches 5 seconds,
the self-timer lamp starts flashing quickly.
When you have recorded 30 seconds of
comment, the “
≠” message appears on the
LCD monitor.
To finish: Press the “MENU/OK” button.
To re-record your comment: Press the “BACK”
button.
●
!
To end your comment during recording, press the
“MENU/OK” button.
3 4
01 03
●
!
You cannot select voice captioning when a sound
sync. mode or continuous shooting is set to “ON”.
●
!
The sound recording time may be shorter than
30 seconds depending on the available space on the
SmartMedia.
●
!
Even if the LCD monitor is switched off, it
automatically switches on when you take a picture
using the Voice captioning function. The LCD monitor
switches off again when audio recording ends.
●
!
If you do not want to record a voice caption, press
the “BACK” button. Note that the image will still be
recorded.
This mode can be selected in the “= • w” still
image modes.
You can use this function to add a voice caption
(comment) up to 30 seconds long to an image
immediately after you take the shot.
hRecording format: WAVE (➡P.126)
PCM recording format
Audio file size: Approx. 240 KB
(for a 30-second voice caption)
Take a picture as normal. The “
¶”
message then appears on the LCD monitor.
D
VOICE CAPTIONING
PHOTOGRAPHY MENU
Face the microphone (➡P.8) on the front of
the camera to record your comments. Hold
the camera roughly 20 cm (7.9 in.) away for
the best results.
