101074
43
Zoom out
Zoom in
Previous page
1/58
Next page
84
5
85
NOTES ON THE REMOTE CONTROL WARNINGS AND AUDIO USB CONNECTION/DOWNLOADING DATA
No SmartMedia is loaded, or it is
loaded incorrectly.
Load a SmartMedia or reload the SmartMedia
the correct way round.
The SmartMedia is not formatted. Format the SmartMedia.
The SmartMedia terminals are soild.
The SmartMedia is damaged.
The SmartMedia format is incorrect.
Wipe the contact area on the SmartMedia with
a soft dry cloth. It may be necessary to format
the SmartMedia. If the error message is still
displayed, replace the SmartMedia.
The SmartMedia is write-protected. Use a SmartMedia that is not write-protected.
The SmartMedia is fully recorded.
Erase some images or use a SmartMedia that
has ample free space.
The frame number has reached 999-
9999.
Switch the Frame NO. Memory function off and
use a formatted SmartMedia to take the picture.
No audio data Audio cannot be played back.
An attempt was made to playback a
frame not recorded on this camera.
Images cannot be played back.
eThe table below shows some of the warning displayed on the remote control LCD panel.
Notes on Using the Audio Functions
Do not use while moving.
Never use the headphones, try to operate the FinePix40i or look at the display screen while you are driving a car or
other vehicle as this could cause a traffic accident. When you are using the FinePix40i while walking, pay close
attention to surrounding traffic and the condition of the footpath.
Do not use the FinePix40i at high volume for long periods and do not turn the volume up high when you begin listening.
Listening to audio at high volume for long periods can adversely affect your hearing. Also, your ears can be
damaged by sudden exposure to loud noise. Increase the volume gradually.
1
Insert the SmartMedia.
Switch the camera on and set the Mode dial
to
1
.
Use the cable provided to connect the camera
to a personal computer and download image
data from the camera to the computer. Note
that you can upload audio data from a personal
computer to the camera.
The software runs on Windows 98 (including the
second edition), Windows 2000 Professional
and Mac OS 8.5.1 to Mac OS 9.0 Note that your
PC must be equipped with a USB port. (The
software is not guaranteed to run on home-
made PCs.)
!
The Auto Power Off function does not operate when
the camera is connected to a PC.
!
It is best to use AC Power Adapter AC-3V (sold
separately) for this operation. Power loss during data
transmission will prevent the image data from being
downloaded correctly.(
P.14)
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujifilm Finepix 40I at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm Finepix 40I in the language / languages: English as an attachment in your email.

The manual is 2,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info