101066
11
Zoom out
Zoom in
Previous page
1/47
Next page
20
1
21
DC IN 3Vsocket
1Use the dc button to select the desired
item and then use the a ([) and b (])
buttons to correct the setting.
2When you have finished setting the date and
time, press the MENU/OK button to confirm
the setting.
The SETUP screen reappears. Press the
MENU/OK button to exit the settings screen.
!
If you hold down the a ([) or b (]) button, the
numbers change continuously.
!
When the time displayed passes 12:00:00, the
AM/PM setting automatically switches.
!
To set the time precisely, press the MENU/OK
button when the time is at zero seconds.
01 02
3 4
Check that the camera is switched off. Plug the
AC power adapter connector into the DC IN 3V
socket on the camera and then plug the adapter
itself into the main power outlet.
4
SETTING THE DATE AND TIME
USING THE OPTIONAL AC POWER ADAPTER
If the date/time setting was cleared and you
selected H, the camera switches directly to
still image, movie or playback mode without
displaying the SETUP screen.
!
See P.77 for notes on using the AC power adapter.
!
Only connect or disconnect the AC power adapter
when the camera is switched off.
Connecting or disconnecting the AC power adapter
while the camera is switched on temporarily
interrupts the power supply to the camera, so that
images or movies being shot at the time are not
recorded. Failing to switch the camera off first can
also result in damage to the SmartMedia or
malfunctions during PC connection.
AC power adapter
(
optional
)
Always use a FUJIFILM AC Power Adapter AC-
3V.
Use the AC power adapter in situations when a
loss of power will cause problems, such as
during file downloading (via the USB connection).
Using the AC power adapter also allows you to
take pictures and play back images without
worrying about depleting the batteries.
!
The Shapes of the AC power adapter, the plug and
socket outlet depend on the country.
!
Install the equipment near a socket outlet for easy
accessibility.
Connecting the AC power adapter does not
allow you to charge the Ni-MH batteries. You
must use the charger provided (P.12) or the
optional charger ( P.71) to charge NiMH
batteries.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujifilm Finepix 2600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm Finepix 2600 in the language / languages: English as an attachment in your email.

The manual is 1,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info