Manual Fujifilm Finepix 1400 ZOOM (page 41 of 45) (English)

101062

Zoom out

Zoom in

1/45

I can’t use the flash to take

pictures.

The flash will not charge.

The playback image is too dark

even though I used the flash.

The image is blurred.

I cannot format the

SmartMedia.

I cannot erase all the frames.

Nothing happens when I use

the camera buttons and

switches.

No image appears when I

press the, “DISP” button.

• The shutter button was pressed when the

viewfinder indicator was blinking orange.

• No compatible SmartMedia is loaded.

• The camera is set to Suppres-sed Flash mode.

• The battery is exhausted.

• The subject is too far away.

• Your finger is covering the flash.

• The lens is soiled.

• Macro photography was used to photograph

scenery.

• The SmartMedia is write-protected.

• The frame is protected.

• Camera malfunction.

• The Mode Swich has been moved to another

setting.

• The battery is exhausted.

• The Mode Swich is set incorrectly.

• Wait until the flash has finished charging before

pressing the shutter button.

• Load a new SmartMedia, erase a frame, or

remove the write-protection.

• Set the flash mode to Auto, Red-eye Reduction,

Forced Flash or Night Scene.

• Load new batteries.

• Move closer to the subject.

• Hold the camera correctly.

• Clean the lens.

• Cancel Macro photography.

• Remove the write-protection.

(Peel off the write-protect sticker.)

• Remove the frame protection.

• Remove the battery, re-insert them and try

again.

• Move the Mode Swich to the correct setting.

• Load new batteries.

• Move the Mode Swich to the correct setting.

Problem Cause Remedy

Troubleshooting

eBefore you decide the camera is faulty, check the following once more.

No power

Power cuts out during

operation.

Battery runs out quickly.

No photograph is taken

when the shutter button is

pressed.

I can’t use the flash to take

pictures.

• Load a new battery.

• Plug the adapter back in.

• Load new batteries.

• Put the battery in your pocket or another

warm place to heat it and then load it into the

camera just before you take a picture.

• Wipe the battery terminals with a clean, dry

cloth.

• Load a new battery.

• Open the lens cover.

• Load a SmartMedia.

• Erase some images or use a SmartMedia that

has ample free space.

• Remove the write-protection.

• Format the SmartMedia.

• Wipe the SmartMedia contact area with a

clean dry cloth.

• Load a new SmartMedia.

• Switch the camera on.

• Load new batteries.

• Set the Mode Swich to the correct setting.

• Set the flash mode to Auto, Red-eye Reduction,

Forced Flash or Night Scene.

Problem Cause Remedy

• The battery is exhausted.

• The AC power adapter plug has come out of

the power outlet.

• The battery is exhausted.

• You are using the camera in extremely cold

conditions.

• The terminals are soiled.

• The batteries are flat.

• The lens cover is not open.

• No SmartMedia is loaded.

• The SmartMedia is fully recorded.

• The SmartMedia is write-protected.

• The SmartMedia is not formatted.

• The SmartMedia contact area is soiled.

• The SmartMedia is damaged.

• The Auto Power Off function has switched the

camera off.

• The battery is exhausted.

• The Mode Swich has been moved to another

setting.

• The flash is set to Suppressed Flash mode.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm Finepix 1400 ZOOM in the language / languages: English as an attachment in your email.

The manual is 2,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fujifilm Finepix 1400 ZOOM Manual

Product: