101062

Fujifilm Finepix 1400 ZOOM Manual

9
Zoom out
Zoom in
Previous page
1/45
Next page
17
1
1
SETTING THE DATE AND TIME
➀
Use the “ab” button to select “DATE/TIME”,
and
➁
press the
“MENU/EXE”
button.
●
!
If you take the batteries out of the camera for 5
minutes or more, or remove the batteries during
setup, the camera settings may all revert to the
factory default values.
●
!
See P.63 for more information on the SET-UP menu.
If the date and time settings are cleared when
you switch the camera on, a confirmation screen
appears. If you chose to reset the date and time,
proceed from step .
➀
Check that the lens cover is open (➡P.19) and
then set the Mode switch to “E”.
➁
When you press the “MENU/EXE” button.
➂
the menu screen appears.
➃
Use the “d” and “c” buttons to select MODE and
then use the “ab” button to select “SET-UP”.
➄
press the
“MENU/EXE”
button.
3
2
16
SWITCHING ON AND OFF
To switch the camera on, move the Mode switch
from OFF to
“
E” or “D”. When you switch the
camera on, the green viewfinder lamp lights.
To switch the camera off, set the Mode switch to
OFF. If the date and time settings have been
cleared, a confirmation screen appears. To set
the date and time, use the “d or c” button to
select “SET” and then press the “MENU/EXE”
button (➡P.18).
1
If the camera is left switched on for two minutes or
more, the Auto Power Off function automatically
switches the camera off.
To switch the camera back
on, set the Mode switch to OFF and then set it back to
“
E
” to take pictures or “
D
” to view images. Holding
down the “MENU/EXE” button as you switch the
camera on disables the Auto Power Off function.
◆
Auto Power Off Function
◆
With the LCD monitor on, you can check the
remaining charge in the battery.
➀
Battery has ample charge.(No indicator
displayed.)
➁
Battery charge low. Replace or recharge the
battery as it will run out shortly.
➂
The battery is exhausted. The display will
shortly go blank and the camera will stop
working. Replace or recharge the battery.
2
●
!
If the date and time shown on the LCD monitor
blinks, set them (next page)
●
!
If the battery charge is depleted, you may not be
able to switch the LCD monitor on.
➀ ➁➃
➂
➀ ➁
Blank
Flashing
On
➄
●
!
If the “H” message appears on the LCD
monitor, open the lens cover (➡P.19).
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujifilm Finepix 1400 ZOOM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm Finepix 1400 ZOOM in the language / languages: English as an attachment in your email.

The manual is 2,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info