62555
117
Zoom out
Zoom in
Previous page
1/164
Next page
117
Software Installation
CAUTION
FinePix Z10fd is compatible with PTP (Picture Transfer
Protocol)/MTP (Media Transfer Protocol). A PTP/MTP-
compatible camera is a camera that can recognize the
PC and printer automatically when connected.
Do not disconnect the USB cable (included) when the
camera is communicating with a PC. If the USB cable
(included) is disconnected during communication, the
files on the Memory Card or internal memory may be
damaged.
In Mac OS X, you must set automatic setup the first time
you connect the camera to your PC.
When the camera and PC are exchanging data, the
indicator lamp blinks alternately green and orange.
Auto power off is disabled during USB connection.
Before replacing the Memory Card, always disconnect
the camera from the PC.
The camera and PC may be exchanging data even
when “Copying” disappears from your PC screen.
Before disconnecting the USB cable (included), always
check that the indicator lamp is off.
Always use FinePixViewer to transfer images with voice
memos to a PC.
The cost of an Internet provider for connecting to the
internet is the user’s responsibility.
When using FinePixViewer to save images on a data
server (network), FinePixViewer may not run as it would
in a standalone PC environment.
CAUTION
Always use the FUJIFILM AC Power Adapter AC-5VX
(sold separately) and DC coupler CP-45 (sold
separately). If the camera suddenly loses power during
data exchange, data exchange will not be performed
correctly, and the Memory Card or internal memory
could be damaged.
Make sure that the USB cable (included) is connected
correctly and securely.
Connect the camera directly to the PC using the USB
cable (included). The software may not operate
correctly when you use an extension cable, or if you
connect the camera via a USB hub.
When your PC has more than one USB port, the
camera can be connected to either port.
When Windows 98 SE is used, the supplied software
must be installed first before connecting the camera to
a PC using the USB cable. The PC will not recognize
the camera if it is connected before installation.
A memory Card, the internal memory, data in a Memory
Card or data in the internal memory could be damaged
if any of the following are performed;
- the USB cable is disconnected
- power switch or buttons are pressed, or the lens cover
is interfered with
Continued Q
117


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fuji FinePix Z10fd at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fuji FinePix Z10fd in the language / languages: English as an attachment in your email.

The manual is 4,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info