Orifice Cleaning:
With burner removed remove the orifice and shine a flashlight through the opening to ensure there is no
blockage. Use a needle to clear any debris. Be extremely careful not to enlarge the hole or break off the
needle.
IMPORTANT:
Installation after cleaning:
After the cleaning, properly locate and re-attach the burner kit with respect to the orifices. Adjust the igniter tip
located near the burner edge.
WARNING:
IT IS EXTREMELY IMPORTANT TO CENTER THE BURNER ON THE ORIFICE PROPERLY TO PREVENT A FIRE
HAZARD OR EXPLOSION.
WARNING:
DO NOT REMOVE BURNER OR PERFORM CLEANING WHILE GRILL IS STILL HOT.
Residue Tray Cleaning:
The residue tray can be washed by hand with standard dish soap and water.
Surface Cleaning:
Grill should be covered when not in use to protect it from outdoor elements. Wipe down surface to
remove any cooking residue with a clean cotton or microfiber cloth. Clean stainless steel surface with a
stainless steel cleaner and apply a polish to keep your grill looking its best.
Firebowl Cleaning:
Step by step instructions can be found in the Help section of our website www.fuegoliving.com.
