27
2 Use window seal:
Don’t turn on the air conditioner until after you’ve attached the window
seal. This will prevent the air conditioner’s warm exhaust air from circulating
around the house.
This window seal isn’t suitable for tilt windows.
1. Velcro on window frame
Clean the window and window frame with soap or detergent to clear it of
any dust and grease. Cut the velcro 1 to size with scissors and attach it to
the window frame around the window.
2. Velcro on window
Next, attach the velcro around the entire window. Note: don’t stick the
velcro onto the glass
3. Seal on window frame
Attach the window seal’s narrow side 2 to the velcro on the window frame.
Work outwards from the middle and fully attach the narrow side all around.
4. Seal on window
Slightly open the window and attach the window seal’s broad side 3 to the
velcro on the window. Make sure to leave enough room in the corners so
the window seal won’t get stuck in the window.
5. Open window seal
Open the window seal’s zipper by about 50 centimeters.
6. Attach exhaust hose
Stick the air conditioner’s exhaust hose through the hole in the window seal.
Close the zipper until the exhaust hose is secured. The window seal is now
ready for use. You can turn on the air conditioner.
