33
End of season cleaning
If the device is to be stored for a long period, you must take the following
measures!
• Remove the condensed water. Run the unit for a few hours on fan functi-
on so that the unit is completely dry inside.
• Then switch the air conditioning unit off and remove the plug from
the socket.
• Clean the lter and reposition them or replace with a new one.
• Unscrew the waste pipe from the device in order to prevent damage.
• Pack the air conditioning unit in its original packaging or in a plastic bag
and place in a dry place for storage. Place a heavy object on the unit.
• Do not install, operate or store the device in a room smaller than 10.3
m² (Fuave ACB12K01) or 12 m² (Fuave ACB14K01).
Troubleshooting and error codes
Troubleshooting
The unit does not start if I press the ON/OFF button
• Is the plug in the socket?
• Is the earth leakage circuit breaker engaged? No power?
• Is the water tank full? Empty it.
• The room temperature is lower than the set temperature; amend the
set temperature.
The unit doesn’t seem to be very effective
• Measure the outlet temperature; this must be approx. 10° cooler than
room temperature.
• Is there direct sunlight? Shut the curtains.
• Are windows or doors open? Shut them.
• Are there too many people in the room? They produce heat!
• Is the space too big?
• Is there an object in the room that is generating (a great deal of) heat?
Switch it off or remove it.
• Is the lter dusty or covered in dirt? Clean it.
• Is the air inlet or outlet (hose) blocked? Make sure there is free air ow.
