505122
22
Zoom out
Zoom in
Previous page
1/26
Next page
Pag.
When you input to “OSD Setting” menu, you will see
a screen like below (OSD 39):
1. Subtitle Display: You can press [Left/Right] key
to select “On” or “Off”. If the current channel has
subtitle information, it will be showed up while this
function is “On”. If this function is “Off”, there won’t
show up subtitle information even if the current
channel has subtitle information.
2. OSD Timeout: When you switch channels in full
screen, there will show up some information about
current channel on the lower of the screen. And
regarding to the duration of these information show up on the screen, you can press [Left/Right]
key to set the time. The range of the duration is “1 second ~ 10seconds”.
3. OSD Transparency: Besides the setting of “OSD Menu Style”, you also can set the transparency
of OSD. You can press [Left/Right] key to select the values. There are 5 levels of transparency,
10%, 20%, 30%, and 40% and “NO” (means no transparency function).
4. Load OSD Setting Default: If you are not satisfy with your setting, you can move highlight
to this item and press [OK] key to reset parameters as default value.
You can set a password for anyone who wishes to
operate in the “Installation” menu. And you can also
set the password for the lock channels. (How to set
the lock channel please refer to LOCK) Here will
show you how to setting and how to revising the
password.
1.In “Parental Lock” function, press [OK] key, there
will pop an dialogue for you to input the password.
The default password is “0000”. When you input the
correct password, you will see a screen like
below(OSD 40):
2.Menu Lock determining that when user wish to enter “Installation” menu, whether have to
input Password or not. If the setting of “Menu Lock” is “Yes” which means user have to key in
password, set “No” means unlock.
3. Channel Lock determining that when user wish to play the lock channels, whether have to
input the password or not. If the setting is “Yes”, play the channels with lock mark will show up
a dialogue on the screen and ask for the password. If the setting of “Channel Lock ”is “No”, the
Lock function will invalid.
4. New Password is used for revising password; you can input the new password in this item
by using number keys directly. After you filled in 4 digital numbers, the highlight will auto skip
to Confirm Password and ask you to input the new password again. If the password is correct,
the screen will show up a message of “Change password successfully”. After finish saving and
draw back to “System Setup” menu, the revising is complete.
5.Press [Exit] key to draw back from the “Parental Lock” menu.
OSD 39
OSD 40
MENU OPERATIONS
Pag.21
5.6 OSD SETTING
5.7 PARENTAL LOCK
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for FTE Maximal MAX T 160 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of FTE Maximal MAX T 160 in the language / languages: English as an attachment in your email.

The manual is 3,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of FTE Maximal MAX T 160

FTE Maximal MAX T 160 User Manual - German - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info