505136

FTE Maximal MAX S402PVR Manual

34
Zoom out
Zoom in
Previous page
1/46
Next page
PAG.
34
rev 1.2
OSD 72
SYSTEM SETUP
(that way, you will assign the alarm function to a concrete TV
or Radio channel) or “Message mode” (creating a text message
that will appear on the screen).
4. “DVR Recorder” / “Radio Recorder” option: If you select this
option, the following fi elds of the image will be shown in order
to be confi gured (OSD 71).
- Start channel: Press [OK] to open the channel list and select
the channel you want to record. By default, when you enter
this option, it shows the current tuned channel.
- Start date: Introduce using the numerical keys on the remote
control the date on which you want to make the recording.
By default, when you enter this option, it shows the current
date.
- On time: Introduce BY using the numerical keys on the remote
control; the time when you want to start recording. By default,
when you enter this option, it shows the current time.
- Length: Settle the length of time you want the receiver to
record a channel. Once it is fi nished, the receiver will be
settled in Stand-By.
Note: If the date/ start time is prior to the current date/hour,
a warning message will be shown and you have to change the
date/start time.
Note: If the hard disk is full and there is not enough space for a
recording, a warning message will be shown on the screen.
Note: If during the recording, the hard disk fi lls up, the recording
stops and will only store the data recorded until that moment
(without losing the previously stored data).
If the TV is in TV mode, a recording timer will be activated
and a message will be shown on the screen, asking for a
confi rmation of the recording or for the timer elimination. After
some seconds, if it is not confi rmed or deleted, the PVR will
start the programmed recording.
5. “Channel reproduction” / “Radio reproduction” option: if you
select this option, the following fi elds of the image will be shown
in order to be confi gured (OSD 72).
- Start channel: Press [OK] to open the channel list and select
the channel you want to watch.
- Start date: Introduce using the numerical keys on the remote
control the date on which you want to activate the alarm
service.
- On time: Introduce using the numerical keys on the remote
control the time on which you want to activate the alarm
service.
- Length: Settle the length of time you want the receiver to keep
one channel. Once it is fi nished, the receiver will be settled
in StandBy. If you do not want the receiver to be settled on
Stand-By, you have to confi gure the length to 00:00.
Note: If the date/ start time is prior to the current date/hour,
a warning message will be shown and you have to change the
OSD 71
ENGLISH
… 34 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for FTE Maximal MAX S402PVR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of FTE Maximal MAX S402PVR in the language / languages: English as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info