505136
21
Zoom out
Zoom in
Previous page
1/46
Next page
PAG.
21
rev 1.2
In order to stop a recording before the ending of the programmed
length, press the [Stop]-Key. A new window will be shown in
order to confi rm the end of the recording (OSD 16). If you
press the Key [Rec], the recording will continue. Press the key
[Stop] again to end the recording manually, if you want to end
the recording before the programmed length.
2.24. PVR
It opens directly the recording administration menu (Chapter
7.1).
2.25. TIME SHIFT
If you are watching a program and you want to stop it and
later continue watching it, press the key [
II
] on the remote
control. The program will stop and will be stored on the hard
disk of your receiver. The OSD will show you the time since the
function is activated (OSD 17).
When you wish to continue watching the program, press the
button [
II
] again. If the information is on the hard disk, it is
possible to fast forward and reward. Pressing the button [
] or [
] several times, you can settle the speed of forward.
Options: 2x, 4x y 8x.
You can also use the keys [
] or [
] in order to go
forward/reward.
Using the key [Info] you can see the time difference between
your reproduction and the real time.
In order to leave the Time Shift option, press the key [stop] to
equal the difference between the reproduction time with the
real one. When you press [Stop] again, it will appear a window
to ask for the confi rmation to fi nish the Time Shift (OSD 18).
If you press the key [Rec], it will continue in Time Shift mode.
Press the key [Stop] again to leave the Time Shift settings.
2.26. FORWARD / REWARD
On a current reproduction, press the keys [
] or [
] to
go forward or reward in a period of the reproduction.
This period is confi gurable using the receiver menu and they
can be of: 1, 3, 5, 10 and 15 minutes (chapter 7.2.2).
If it is confi gured in every 10 minutes, each time that you press
this key, it will jump automatically 10 minutes forward/reward
of the reproduction.
2.27. GOTO
On a current reproduction, press the key [GoTo] to go to a
certain point of the reproduction.
When you press this key, a window appears where you can
introduce, using the numbers on the remote control, the hour:
minute: second you want to go to (OSD 19).
If the introduced value is higher to the reproduction limit, an
error window will be shown.
OSD 16
OSD 17
OSD 18
OSD 19
BASIC OPERATIONS
ENGLISH
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for FTE Maximal MAX S402PVR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of FTE Maximal MAX S402PVR in the language / languages: English as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info