505138
29
Zoom out
Zoom in
Previous page
1/39
Next page
PAG.
29
rev 1.1
5.9. OTHER
When you select “Other” you will see a screen like OSD 49:
5.9.1. LNB POWER
Here you can set the power output to the LNB. If your receiver
is connected to the LNB directly then you need to set the
LNB Power to “On”. If your receiver is connected to a multi
switch (SMATV signal distribution system) then it may be that
you don’t need to provide the power to the LNB. But since
this is depending on the kind of installed distribution system we
recommend you to contact your installer or to refer to the user
manual of this system to get the correct information.
You also just can change this setting and check if you still can
receive the channels. If the LNB Power is off and you still can
see all channels then we recommend this setting.
5.9.2. CHANNEL PLAY TYPE
In this option you will be able to choose which type of channels
the receiver shown every time it starts. Press [ ] in order
to select among All, Free or Scrambled.
5.9.3. CHANNEL CHANGE
From this option you will be able to select the effect that will
be shown in the screen every time you change the channel.
Press [ ] in order to select between “Black screen” or
“Freeze” (it will show the frozen image of the cannel you were
watching).
5.9.5. AUTO STANDBY
This option will allow you to activate or deactivate the automatic
Standby option. Options: On, Off.
-On: The receiver will be in standby mode automatically after
3 hours, as long as during this time no commands have been
sent to the receiver through the remote control or buttons of
the front panel, and no programmed timers are run.
-Off: Auto standby function gets deactivated.
Use [ ] in order to turn this option on/off.
5.9.6. CLOCK IN STANDBY
If you wish to see the current time in the display while the
receiver is in standby mode, you should confi gure this option
“On”.
SYSTEM SETUP
OSD 49
ENGLISH
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for FTE Maximal MAX S400 HD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of FTE Maximal MAX S400 HD in the language / languages: English as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of FTE Maximal MAX S400 HD

FTE Maximal MAX S400 HD User Manual - German - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info