505112
34
Zoom out
Zoom in
Previous page
1/38
Next page
User’s manual · I-PVR T152 CI HDMI
Technical changes and mistakes reserve - 34 - I-PVR T152 CI HDMI Version en_1.0 FTE Maximal
10.3. MUX Management
Here you can modify the frequency list of the channels. In normal conditions,
you do need no handling.
Delete Frequency
If you want delete one frequency, you can do it with the Red button Delete.
Doing it, you will see now one symbol like the one at the right side.
You can mark more than one lines, all of them will be deleted when you close the
MUX Management.
Edit / Add Frequency
With the Green button Edit you can modify one frequency,
and with the Yellow button Add you can add one new frequency .
The use of Add and Edit is the same.
Please input here the middle frequency of one carrier.
Example: CH 26 is from 510 up to 518 MHz
The correct frequency is 514MHz
In the line BW you have to select the bandwidth for this frequency.
Normally is in VHF band 7MHz, and in UHF 8MHz.
If everything is done, press OK button.
Skip Frequency
With this function it is possible to skip one frequency in the channels searching
process.
The marked frequencies will not be checked when new channels are searched,
so make sure before marking these channels.
For marking the frequencies, select it with the buttons
and
and then press the Blue button Skip.
You can mark more than one frequency.
10.4. Channel Search: IP
The receiver will carry out a search for channels broadcasted by other
equipment connected to the network.
You can receive transmissions of other equipment in mode Unicast and
Multicast.
- Unicast is when the information is sent from a unique sender to a
unique receiver.
- Multicast in when the information is sent through a network to multiple
destinations simultaneously. The equipment that work in multicast
mode send the information into an IP range between 224.0.0.0 and
239.255.255.255.
In Search Type select Auto to search for all the channels which are
broadcasted by other equipment in your network in multicast mode. If you
select the Host option, it will look for transmissions of the equipment present in
the list Network Management that you select.
In the field Multiplex you should select the hosts from the list Network
Management in which you with to search for channels.
Pressing the Blue button or
a new window will appear, where you can
select the hosts.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for FTE Maximal I-PVR T152 CI HDMI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of FTE Maximal I-PVR T152 CI HDMI in the language / languages: English as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of FTE Maximal I-PVR T152 CI HDMI

FTE Maximal I-PVR T152 CI HDMI User Manual - German - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info