14
houses; by clients in hotels, motels and other residential type
environments; bed and breakfast type environments.
The appliance may also be used outdoor, on the following
conditions:
* The power cord is regularly examined for signs of damage.
If this is the case, do NOT use the appliance anymore, but
immediately return it to your sales point.
* The appliance must be connected to a socket-outlet
having an earthed contact 230V.
* The appliance must be supplied through a residual current
device (RCD) having a rated residual operating current NOT
exceeding 30 mA.
NEVER touch the control buttons, the electrical cord or
the plug with wet hands, and NEVER immerse them in
water or any other liquid. They are only to be cleaned
with a damp cloth. Should they get wet anyway,
immediately pull out the plug from the socket.
A damaged power cord can cause electric shocks. NEVER
use the appliance if it is damaged, fallen or shows a
malfunction, or if the power cord or plug are damaged. In
all these cases return the appliance to your sales point or
recognized after sales service.
After use remove the plug from the power point. Also
proceed this way when the appliance is NOT in use,
before cleaning and moving.
NEVER use separate timers or remote control systems.
ALWAYS place the appliance on a solid and flat base, such as a kitchen counter or
table, so that the appliance won’t move or turn over.
NEVER use the appliance outdoor.
NEVER use extension cords or sockets. Place the appliance near a power point
and connect it directly. ALWAYS complete unroll the power cord.
NEVER let the cord hang over the edge of the table or the counter.
NEVER place the power supply cord near heat sources such as cookers, heatings
or ovens.
Only use the appliance on the mains voltage as indicated on the identification
label.
This appliance is only suited for household use, and NOT for professional use.
