798519

Fritel Turbo SF 4209 Manual

22
Zoom out
Zoom in
Previous page
1/32
Next page
FRITEL Turbo SF® fryer: The only one with heating element on 2 levels
22
The fryer is stored in a cold place. If you do so, it can be switched off by the safety
thermostat => solution: before using the fryer, place it at room temperature for
about an hour, so that the fryer can get at room temperature.
Check is the reset button has come out. In that case you will see a red button at the
backside of the control panel => Press the reset button back inside (afther the fryer
has cooled off) and in most cases the fryer will work again.
The resistance has a blue-grey color => the fryer was probably heated without oil, or
with too little oil, or the solid fat was not melted correctly according to the
instructions mentioned in the user manual. In some cases this problem can be solved
by pressing the reset button. If the fryer still doesn’t work, the only solution is to
replace the complete control panel.
The fryer is overheating
If this happens, the fryer will be shut off by the safety switch. To use the fryer again,
let it cool off entirey first, and then press the red reset button at the backside of the
control panel.
The fryer boils over / the oil
starts to smoke
Do not let the oil get too old or too dirty. Replace the oil after approx. 10 times,
depending on the ingredients used.
Avoid water accumulation on the bottom of the bowl:
• Remove as many as possible ice from frozen products
• Dry off well fresh ries
• Choose the appropriate potato kind, that doesn’t contain too much water (i.e.
Bintjes).
Prebake at 170° min. Bake at 190°C.
Fill the basket with no more than 2/3.
Use the appropriate oil.
The oil/fat needs to be replaced.
The baking result is not
crispy
Only use potatoes that release enough starch to form a crispy crust, like i.e. Bintjes.
Wash and dry off the fresh fries.
Choose the right baking temperature. For fresh fries, we advise: prebake at 150-
170°C and bake at 180-190°C.
The oil splashes too much
To avoid dangerous splashes, remove the ice from frozen products. Avoid water
accumulation on the bottom of the bowl (see: the fryer boils over)
NEVER hang the basket, filled with frozen products above the oil as long as 130°C is
not reached.
The control light doesn’t
work anymore
Return the fryer to your sales point.
After pressing the reset
button, the fryer still doesn’t
work
Return the fryer to your sales point.
Check if the mains voltage matches the mains voltage indicated on the appliance.
Only use the fryer with 230 Volt alternating current
The power cord is damaged
Return the fryer to your sales point.
The safety thermostat is
switched off
Let the fryer cool off entirely and then press the reset button.
The appliance has been developed for household use. When using it for professional purpose, the conditions of
warranty will change. Any damage caused due to incorrect use (non-observance of this user manual) will cancel
the warranty.
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fritel Turbo SF 4209 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fritel Turbo SF 4209 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1.18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info