397487

Fritel jp 9970 Manual

10
Zoom out
Zoom in
Previous page
1/17
Next page
10
6. Place the pusher into the feeding tube (Fig. 5). For fine fruit and vegetables, please use the small pusher, like f.e. carrots. For large fruit and
vegetables, please use the large pusher, like f.e. apples.
7. Place a glass under the antidrip spout.
8. Wash the fruit/vegetables and slice them if needed so that they fit into the feeding tube.
9. During the extracting, always put the antidrip spout in downward position.
10. Switch on the button: choose speed 1 (low) or speed 2 (high). Remark: the appliance will only work if all parts were mounted correctly and if
the lid is fixed into the safety brackets.
11. Place the ingredients in the feeding tube and gently press them down. If you press too hard/fast this can influence the final result and in some
cases cause the motor to stop. After the ingredients are processed and all juice is in the juice collector, put the antidrip spout in upward
position, swich off the appliance and wait for the motor to stop turning entirely.
12. To dismount the appliance, you need to repeat steps 1-5 in reverse order.
USE OF THE CITRUS PRESS
1. Unroll the power cord.
2. Place the juice collector on the motor block (Fig 1).
3. Place the gearbox on the juice collector. (Fig. 2)
4. Place the citrus sieve on the clutch (Fig. 3) . Please make sure that the sieve is well fixed on the clutch.
5. Fix the two safety brackets on the citrus sieve (Fig. 4).
6. Depending on the fruit size, place the small or large pressing cone on the sieve. (Fig. 5).
7. Place a glass under the spout.
8. Wash the fruit and slice it in half.
9. During pressing, always put the antidrip spout in downward position.
10. Put the switch on position 1 (low speed). Remark: for the citrus press function, only position 1 can be used. If you use position 2, the juice will
start splashing. Remark: the appliance will only work if all parts were mounted correctly and if the lid is fixed into the safety brackets.
11. Place the fruit on the pressing cone and press gently. If you push too hard this may influence the final result and in some cases it may even
damage the motor. After the ingredients are processed and all juice is in the juice collector, put the antidrip spout in upward position, swich off
the appliance and wait for the motor to stop turning entirely.
12. In order to dismount the appliance, please repeat steps 1-5 in reverse order.
GENERAL TIPS
Fig. 3
Fig. 4 Fig. 5
Fig. 2
Fig. 1
Fig. 1 Fig. 2 Fig. 3
Fig. 4
Fig. 5
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fritel jp 9970 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fritel jp 9970 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info