Manual Fritel JE 3877 (page 14 of 24) (English, German, Dutch, French)

506439

Zoom out

Zoom in

1/24

BEFORE THE FIRST USE

‐ Check if the mains voltage of your appliance (230 Volt) corresponds with the mains voltage in your

home.

‐ Remove all packaging, the label on the filling shaft and the label on the LED display. Then clean the

parts as described in ‘ Maintenance and cleaning’, before using the appliance for the first time.

ASSEMBLING THE JUICE EXTRACTOR

‐ Place the juice collector on the motor base

‐ Place the stainless steel sieve inside the juice collector and gently press down until the sieve is well

fixed.

‐ Place the lid with filling shaft on the juice collector

‐ Slide the pusher in the filling shaft

‐ Lock the safety brackets

‐ Place the Residue container under the large outlet of the lid. Make sure that the bottom of the

container is placed on the support piece on the juice extractor.

‐ Place a glass/carafe under the juice outlet

PRACTICAL TIP: The cleaning process is being simplified by placing a plastic bag in the residue

container. In this way, you can remove the residue without spilling.

HOW TO USE THE JUICE EXTRACTOR

‐ First wash the fruit and vegetables under running water.

‐ Check if the juice extractor is assembled correctly.

‐ Make sure that the speed control button is on the OFF position. Pull the plug into the socket (230 V.).

‐ Select your speed position. Take out the pusher of the filling shaft and fill it. DO NOT fill the shaft

completely. Place back the pusher into the filling shaft and gently press down the food. With firmer

apple varieties a.o., you could feel a little resistance. Briefly press harder the apple until it touches the

grater. Then push gently again.

‐ The juice is running into the glass/carafe and the residue into the residue container.

IMPORTANT: Make sure the residue container is not too full. In that case, the appliance will not

work properly or can even get damaged. Always switch off the juice extractor before emptying the

residue container.

DISASSEMBLING THE JUICE EXTRACTOR

‐ Turn the speed control button on the OFF position and pull the plug out of the socket.

‐ Unlock the safety brackets

‐ Remove the residue container from under the lid.

‐ Remove the lid with fillingshaft and pusher.

‐ Remove the juice collector together with the sieve. This will enable you to remove the sieve easily

afterwards. DO NOT touch the grater inside the stainless steel sieve with your hands!

IMPORTANT: The grater in the stainless steel sieve is very sharp. NEVER touch the grater or

the cutting surface with your hands. ALWAYS take stainless steel sieve by the rim.

MAINTENANCE AND CLEANING

‐ Turn the speed control button on the OFF position and pull the plug out of the socket.

‐ Then disassemble the appliance. (see ‘disassembling the juice extractor’)

‐ NEVER clean the parts in the dish-washer, but clean them in hot soapy water.

‐ NEVER immerse the motor housing in water or any kind of fluid. The motor housing needs to be

cleaned with a damp cloth.

‐ The stainless steel sieve can be cleaned easily with a nylon washing-up brush in warm soapy water.

NEVER immerse the stainless steel sieve in a bleaching product.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fritel JE 3877 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fritel JE 3877 Manual

Product: