397102

Fritel je 2750 Manual

12
Zoom out
Zoom in
Previous page
1/16
Next page
12
• NEVER place the power supply cord near heat sources such as cookers, heatings or ovens.
ASSEMBLING THE JUICE EXTRACTOR
• Place the juice bowl on the motor-housing.
• Then place the stainless steel sieve into the juice bowl.
• Now place the lid with filling shaft on the juice bowl and
• Lock the safety bracket in the upward vertical position and Slide the pusher into the filling shaft.
• Place the residue container under the outlet of the lid. Incline the residue container slightly, to
place it easily under the lid. Place a glass under the juice spout.
PRACTICAL TIP: The cleaning process is being simplified by placing a plastic bag in the residue
container. In this way, you can remove the pulp without spilling.
HOW TO USE THE JUICE EXTRACTOR
• First wash the fruit and vegetables under running water.
• Check if the juice extractor is assembled correctly.
• Pull the plug into the socket (230 V.). Switch on the button. LOW = soft fruit-vegetables / HIGH = firm
fruit-vegetables.
• As soon as the motor is running, take out the pusher of the filling shaft and fill it. Do not fill the shaft
completely. Place back the pusher into the filling shaft and gently press down the food. With firmer
apple varieties a.o., you could feel a little resistance. Briefly press harder the apple until it touches the
grater. Then push gently again.
• The juice is running into the glass and the residue into the residue container.
IMPORTANT: Make sure the residue container is not too full. In that case, the appliance will not work
properly or can even get damaged. Always switch off the juice extractor before emptying the
residue container.
DISASSEMBLING THE JUICE EXTRACTOR
• Switch off the juice extractor and pull the plug out of the socket.
• Remove the residue container from under the lid.
• Take the safety bracket with both hands and gently pull them out of the notches on the lid and lift the lid.
• Turn the juice bowl within the stainless steel sieve with your right hand to you and take it out. The
stainless steel sieve is loose, pay attention to it that it won’t drop out.
• Turn the juice bowl upside down on a plate or on the sink to remove the stainless steel sieve from the
juice bowl.
IMPORTANT: The stainless steel sieve is built up of small sharp knives on the grater. NEVER
touch the knives of the cutting surface with your hands. ALWAYS take the edge of the
stainless steel sieve.
MAINTENANCE AND CLEANING
• Switch off the appliance and remove the power supply cord. Then disassemble the appliance.
Open the safety bracket, remove the lid, the juice bowl and the stainless steel sieve. Clean these parts
under running water. Do not use too hot water of a dishwasher.
• NEVER immerse the motor housing in water or any kind of fluid. The motor housing needs to be
cleaned with a damp cloth.
• All the other parts may be cleaned in hot soapy water.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fritel je 2750 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fritel je 2750 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info