798524

Fritel IP 1266 Manual

16
Zoom out
Zoom in
Previous page
1/24
Next page
16
Timer function
To select the timer function, press the "MODE" button until the timer LED lights up. You can now use the rotary knob
to set the desired cooking time, ranging from 1 minute to a maximum of 3 hours. The timer is activated as soon as you
do not touch any button for a few seconds. When the timer runs out, you will hear a short beep and the appliance will
go back into standby mode. You can also see this by the flashing "----" on the display. It is perfectly normal for the fan
to continue working in standby mode.
If the setting is not changed for 3 seconds after the LED display has blinked, the last setting chosen is always applied.
The display will alternately show the selected temperature and remaining cooking time or the selected power level
and remaining cooking time.
If you do not wish to use a timer, the appliance will automatically switch to standby mode after 2 hours.
If you wish to stop the cooking process earlier without using a timer, you can simply switch the appliance off using the
ON/OFF key.
5. MAINTENANCE AND CLEANING
First switch off the appliance and remove the plug from the socket.
You can clean the cooking plate with a soft, damp cloth or sponge. If the cooking plate is very dirty, you can use a
special cleaner for ceramic cooking plates.
The rest of the appliance can be cleaned with a soft, damp cloth. The appliance should NEVER be immersed in water.
Always alllow to dry completely.
Remove any dust in the air inlet and outlet with a cotton swab.
6. PRACTICAL TIPS IN CASE OF MALFUNCTIONS
Possible error messages
Error message Advice
A sound signal and the MODE
button does not react.
There is no pot on the cooking
plate.
Place a suitable cooking pot in the centre of the cooking zone.
E01
Indicates a short circuit.
Unplug the power cord, wait a few minutes and try again. If the error persists,
contact your sales point or recognized repairer.
E02
The temperature sensor under
the glass is overheated or
malfunctioning.
Remove the plug from the socket and allow the cooking plate to cool down. If the
appliance cannot be switched on again, contact your sales point or recognized
repairer.
E03
The mains voltage is lower or
higher than that displayed on
the unit.
Check whether your appliance is suitable for the mains.
If there is still a malfunction, do not use the appliance. Please address to your sales point. Also when the power cord is
damaged, address to your sales point or recognized repairer.
THE APPLIANCE HAS BEEN DESIGNED FOR DOMESTIC USE. THE WARRANTY CONDITIONS EXPIRE UPON
PROFESSIONAL USE. DEFECTS AND/OF DAMAGES FOLLOWING TO THE NON OBSERVANCE OF THE
USER MANUAL ARE NOT COVERED BY THE WARRANTY.
We are entitled to make technical modifications at all times.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fritel IP 1266 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fritel IP 1266 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1.52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info