647322
28
Zoom out
Zoom in
Previous page
1/40
Next page
28
4. CLEANING AND MAINTENANCE
4.1. Changing the solid fat
We recommend changing it right after the use of the deep fryer, when the fat is still
liquid. Let the fat cool down as long as possible. Then pour the fat in a receiver.
Caution: danger of burns, the frying fat is still hot! Be careful.
If you decide to change the fat after that it has solidified entirely, follow the steps
below:
1. Insert the plug in the socket.
2. Push the thermostat knob for 2 sec. (fig.A). The display will show « Turbo SF
System Activated » and a sound signal will be heard.
3. On the display following text will flash « Melting Solid Fat » (14).
4. Make some holes till the heating element with a wooden spoon in the fat (fig.
G).
5. Push the thermostat knob to confirm (fig. C). The red lamp (fig.D) lights up and
the fat will start melting. Caution: if you do NOT push the thermostat knob
within the 15 sec. the display will return to the previous setting.
Caution: NEVER leave the deep fryer unattended whilst working. When the fat
is liquid, switch off the appliance and pull the plug. First remove the basket and
then the control panel. Pour the melted fat carefully in a receiver. Don’t throw
the fat away but bring it to the container park or a collection point.
6. Now clean the deep fryer: see point 4.3.
7. To add new frying fat: see point 3.1.2.
4.2. Changing the frying oil
1. Let the frying oil cool down to at least room temperature.
2. First remove the basket and then the control panel. Carefully pour the oil in a
recipient.
3. Don’t throw the fat away but bring it to the container park or a collection point.
4.3. Cleaning
1. Remove the plug and let the deep fryer completely cool down before
disassembling it. First remove the basket, then the control panel with heating
element and then the bowl.
2. -NEVER immerse the control panel in water or any other liquid. Only clean it
with a damp cloth.
-Stainless steel housing, stainless steel lid and stainless steel bowl can be
cleaned in the dishwasher or in hot water with detergent. Nevertheless, we
recommend to clean the stainless steel parts in hot water with detergent,
considering the aggressive detergents used in the dishwasher may affect the
shine of the stainless steel.
-Synthetic housing and synthetic lid can both be cleaned in the dishwasher or in
hot water with detergent.
-Important: the painted metal housing and painted metal lid need to be cleaned
in hot water with detergent. In the dishwasher a discoloration may occur due to
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fritel Frytastic-5571 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fritel Frytastic-5571 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info