616024
23
Zoom out
Zoom in
Previous page
1/36
Next page
23
2. BEFORE FIRST USE
Remove all packaging and stickers.
Keep all packing material out of reach of children.
Check that there is no damage to the deep fryer or the power cord. If there is any damage, do
NOT use the deep fryer and return it to the sales point.
Before using the deep fryer for the first time, clean the bowl and the basket (see point 4.3).
Disassemble the deep fryer in this order: basket – control panel with heating element – bowl.
Clean the bowl and the basket
Assemble the deep fryer in this order: bowl – control panel with heating element – basket.
Always put the bowl in the housing in such a way that the suspension hook (10) is at the front
of the deep fryer.
Check if the sliders (4) fit precisely in the grooves (2) made for that purpose (backside control
panel).
Ensure that the voltage marked on the rating-plate is the same as your main voltage.
3. USE OF THE FRYTASTIC FRYER
3.1 The first use
3.1.1. Use of frying oil
1. Remove the lid and the basket
2. Fill the deep fryer with oil between the MIN and MAX inside the bowl (17).
Caution: NEVER switch on/warm up the deep fryer WITHOUT oil or with UNSUFICIENT
oil. If you do so, the deep fryer may get damaged permanently. NEVER leave water in the
stainless steel bowl when filling it with oil or fat. The oil must always be between MIN and
MAX, otherwise the safety thermostat switches off. Only use oil suitable for frying/for high
temperature.
3. Then follow the instructions from 3.2 point 1.
3.1.2. Use of solid fat
With this program the frying fat is melted as per special electronic procedure, determined in
advance, in a safe and controlled way.
1. Remove the lid and the basket.
2. Cut the fat in small pieces and spread over the complete heating element (fig.F).
3. Completely unroll the power cord and insert the plug into the socket.
4. Push the thermostat knob for 2 sec. (fig. A). On the display the text « Turbo SF System
Activated » and a sound signal will be heard.
5. On the display following text will flash « Melting Solid Fat » (14).
6. Push the thermostat knob to confirm (fig. C). The red lamp (fig.D) lights up and the fat will
start melting.
Caution: if you do NOT push the thermostat knob within the 15 sec. the display will return to
the previous setting. (In this case: Turbo SF System Activated)
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fritel Frytastic 5150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fritel Frytastic 5150 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info